Smd Inductor 0603 82Onh K Manufacturer Spot Suppliers and Manufacturers

SMD inductor product introduction: Volume: 0402, 0603, 0805, 1206, 2520, 3225, 4532, 5650 Tolerance: I=±7%, K=±10%, L=±15%, M=±20% Sense: 1.2N 1.5N 2.2N 3.9N 6.8N 1R0K 1R2K 2R2K 2R7K 3R3K 4R7K 10u 15u 12u 18u 22u... 1MH 1.2MH 1.5MH 1.8MH 2.2MH Features: 1. High-precision wire-wound inductors suitable for automatic placement; 2. Good solderability; 3. Heat-resistant resin encapsulation, with excellent mechanical strength; 4. Excellent Q value and high reliability; 5. Used in LCD TVs, computer drives, mobile phones, car stereos and other electronic products.

Product Name: Common Mode Inductor Product parameters (product overview) volume: 0402, 0603, 0805, 1206, 2520, 3225, 4532, 5650 Tolerance: I=±7%, K=±10%, L=±15%, M=±20% Sensitivity: 1.2N 1.5N 2.2N 3.9N 6.8N...... 1R0K 1R2K 2R2K 2R7K 3R3K 4R7K 10u 15u 12u 18u 22u 1MH 1.2MH 1.5MH 1.8MH 2.2MH Features: 1. High dimensional precision wire wound inductor suitable for automatic placement; 2. Good solderability; 3. Heat-resistant resin encapsulation with excellent mechanical strength; 4. Excellent Q value and high reliability; 5. Used in LCD TVs, computer drives, mobile phones, car audio and other electronic products.

Item Specifics: Model: PIM1030R12MZ L0(uH)/inductance at 0A,100KH):Typ.:0.12 DCR (mª+)at 25ípC:Typ.0.65/Max:0.75 Irated(Adc)/Heat RatingCurrent :Typ.:30 Isat(Adc)/Saturation Current:Typ.:75 Available L0(uH):From 0.12 to 10.00 Molded Power Inductor Operating temperature : -55íµ ~ +125íµ Ambient Temperature, Maximum : 85íµ Temperature Rise, Maximum: 40íµ Features Low profile, high current SMD type. Lowest DCR/µH, in this package size, low buzz noise due to its gap-less structure, RoHS compliant. Frequency range up to 5MHz. Lowest DCR/µH, in this package size Low buzz noise due to its gap-less structure RoHS compliant. Applications Notebook/Desktop/Server/Video Card applications. High current POL converters. Low profile, high current power supplies Battery powered devices. Ideal for power source circuits, DC-DC converter DC-AC inverters inductor application. Note: 1. L0 is inductance tested at 0 Adc. 2. Isat is the DC current which cause the inductance drop approximately 30% of its nominal inductance without current. 3. Irated is the DC current which cause the surface temperature of the part increase appproximately than 40íµ. 4. Operating Temperature Range: - 55íµ to +125íµ 5. The part temperature (ambient + temp rise ) should not exceed 125íµ under worse case operating conditions. Circuit design, component placement, PWB trace size and thickness, airflow and other cooling provision all affect the part temperature. Part temperature should be verified in the end application. 6. The rated current as listed is either the saturation current or the heating current depending on which value is lower.

Ll1608-fsl3n9s Toko make Pack:2k/reel Datecode:09+rohs L/t:1-7days Weight:0.2kg Reel package

SMD inductor parameters: Volume: 0402, 0603, 0805, 1206, 1210 Units: H, NH, UH, MH Error: 5%, 10% Packing: 4000PCS/disk, 3000PCS/disk above 1206 Current: the difference between small current and large current, unit A (ampere) The chip inductors in our inventory are complete in specifications: A complete range of conventional models, including: SMD magnetic beads, high current SMD inductors, SMD power inductors, high frequency inductors, SMD wire wound inductors, laminated inductors, common mode inductors, shielded inductors, I-shaped inductors, etc.; Conventional inductance, rated current and other parameters are in stock. The role of chip inductors: 1. Filtering Because it has the characteristics of passing DC and blocking AC, it can be used for power supply filtering; 2. Resonance It can form a resonance frequency selection circuit with a capacitor, and the resonance frequency is determined by the size of the chip inductance and capacitance; 3. Frequency division Can be used for frequency division of high and low frequency signals Application fields of chip inductor products: Internet of things products, smart products, Internet products, communication products, 3D printers, etc.

Ni-Zn Soft Ferrite Cores Emi suppression generated from round cable used in digital equipment. Emi/rfi suppression, plus and matching transferor, choke, input filters

Product Name: Ingredient inductor Category: Patch inductor series Product Description: Body: 0402, 0603, 0805, 1206, 2520, 3225, 4532, 5650 Tolerance: i = ± 7%, K = ± 10%, L = ± 15%, M = ± 20% Punch: 1.2N 1.5N 2.2N 3.9N 6.8N ... 1R0K 1R2K 2R2K 2R7K 3R3K 4R7K ... 10U 15U 12U 18U 22U ...... 1MH 1.2MH 1.5MH 1.8MH 2.2MH ... Features: 1. Adapt to the high-dimensional precision winding inductor of the automatic mount; 2. Good solderability; 3. Hot resin package, excellent mechanical strength; 4. Excellent Q value and high reliability; 5. Used in LCD TVs, computer drives, mobile phones, car audio, and other electronic products.

Size: 0400 / 0401, 0402, 0802, 0804, 0810, 1306 / 0403, 0504, 0703, 0705, 1004, 1005, 1005B L: 0.33µH~4700mH

Send me blueprints or draws with dimensions information to quote

Magnetic Shielded surface mount inductor with high current rating. Low Resistance to keep power loss minimum.

MaterialAluminum housing Led qty14pcs epistar smd5050 Working voltage available Dc 6~40v Ac 5~20v 185~245v Ac 85~265v Lumen280~308lm Color temperature2800k¡«6200k Color rending index75 Power3w Beam angle60¡ã Lamp baseGu5.3 Life time30, 000h Dimension50mm*45mm Weight75g. 200pcs in a carton

Product name: I-shaped inductor Category: SMD inductor series Product introduction: Volume: 0402, 0603, 0805, 1206, 2520, 3225, 4532, 5650 Tolerance: I=�±7%, K=�±10%, L=�±15%, M=�±20% Sensation: 1.2N 1.5N 2.2N 3.9N 6.8N...... 1R0K 1R2K 2R2K 2R7K 3R3K 4R7Kâ?¦ 10u 15u 12u 18u 22uâ?¦ 1MH 1.2MH 1.5MH 1.8MH 2.2MHâ?¦ Features: 1. High dimensional precision wire wound inductors suitable for automatic placement; 2. Good solderability; 3. Heat-resistant resin encapsulation, with excellent mechanical strength; 4. Excellent Q value and high reliability; 5. Used in LCD TVs, computer drives, mobile phones, car audio and other electronic products. Order Hotline: 400-003-5559 I-shaped inductor, the role of the inductor, the inductance formula, the unit of the inductor, the chip inductor package, the inductor, the chip power inductor, the one-piece inductor, the chip inductor specification, the I-shaped inductor, the chip I-shaped inductor specification, Shielded I-shaped inductor, SMD inductor tdk, SMD inductor pdf, SMD inductor 47uh, SMD inductor 470, SMD inductor 330uh, SMD inductor 2.2uh, buy SMD inductor,

Power inductor, coils, smd chip bead.

Chip capacitors: Model: 0201, 0402, 0603, 0805, 1206, 1210, 1808, 1812, 2220, 2225 Material COG NPO X7R X5R Y5V Temperature range -55+125-55+125 -55+12 85-30+85 Capacitance range 1-10P 1-100P 100P-100NF above 100NF Letters G J K M Z Error ±2% ±5% ±10% ±20% +80%-20% Applicable fields: Internet of Things products, smart products, Internet products, communication products, medical products, etc. Pingshang Technology's chip capacitors are sold directly by the factory, and the product models are complete, and the test samples are provided, and the service life is long. Welcome to come to know.

SMD inductor parameters: Volume: 0402, 0603, 0805, 1206, 1210 Units: H, NH, UH, MH Error: ±5%, ±10% Packing: 4000PCS/disk, 3000PCS/disk above 1206 Current: the difference between small current and large current, unit A (ampere) The chip inductors in our inventory are complete in specifications: A complete range of conventional models, including: SMD magnetic beads, high current SMD inductors, SMD power inductors, high frequency inductors, SMD wire wound inductors, laminated inductors, common mode inductors, shielded inductors, I-shaped inductors, etc.; Conventional inductance, rated current and other parameters are in stock. The role of chip inductors: 1. Filtering Because it has the characteristics of passing DC and blocking AC, it can be used for power supply filtering; 2. Resonance It can form a resonance frequency selection circuit with a capacitor, and the resonance frequency is determined by the size of the chip inductance and capacitance; 3. Frequency division Can be used for frequency division of high and low frequency signals Application fields of chip inductor products: Internet of things products, smart products, Internet products, communication products, 3D printers, etc.

Pingshang Technology sells patch transistors in stock, complete specifications, original original products, and shipped as soon as 24 hours. Fast delivery and good quality! SMD transistor: Package: SOT-23 Model: S9012, S9013, S9014, S9015, S9018, S8050, S8550, SS8050, MMBT3904, MMBT3906, MMBT4401 MMBT5551, MMBT5401, MMBT2222, MMBT2907, MMBT2907A, etc. SMD transistor characteristics: 1. Different materials made of different spectral characteristics; 2. Has a great photocurrent amplification effect; 3. When the PN junction with photosensitive characteristics is exposed to light radiation, a photocurrent is formed; 4. The base area is made larger, and the launch area is made smaller; Widely used in: sweeping robots, terminal equipment, smart electronic products, smart audio and video, fitness equipment and other fields, long-term continuous supply, support for customization, and provide free samples.

SMD Spot Light Apps /Certification Compliant : CE & ROHS Consumer Code : CMR16 -5W Specification : 5W SMD MR16 380lm ERP Compliance CRI>80 60°beam angle 35W halogen MR16 equivalent Non Dimmable & Dimable Watts : 5 Color : Warm White Neutral White Cool White Warranty (Years) : 2 Notes: 1OEM products, plain packaging with C-tick. 2 Minimum One year warranty offered on all products unless otherwise stated. 3 Warranty will be void if goods are not retuned for exchange in satisfactory condition or if due to inappropriate handing 4 Unless otherwise stated products are direct connect, wide voltage rated AC 86 - 265v (TBA on order specs) 5 Price quoted do not include local taxes 6 Products are EMC compliant as a minimum, with certifications from several countries and regions. 7 Order require prepayment 8 Minimum led lifetime 30,000 hrs 9 Allow approximately 4 -6 weeks for delivery. 10 Shipping costs to be advised based on delivery port Disclaimer: Lucent LED Lighting will not be held responsible nor accept liability either directly or through a third party for any wrongful or inaccurate interpretation or use of information supplied. P.S : Commercial, Industrial, Marine, Aviaition and Militry Grade products are available on request basis.

Apps /Certification Compliant : CE & ROHS Consumer Code : CMR16-7W Specification : 7W SMD MR16 550lm ERP Compliance CRI>80 60°beam angle 60W halogen GU10 equivalent Patented lens design Watts : 7 Color : Warm White Neutral White Cool White Warranty (Years) : 2 Notes: 1OEM products, plain packaging with C-tick. 2 Minimum One year warranty offered on all products unless otherwise stated. 3 Warranty will be void if goods are not retuned for exchange in satisfactory condition or if due to inappropriate handing 4 Unless otherwise stated products are direct connect, wide voltage rated AC 86 - 265v (TBA on order specs) 5 Price quoted do not include local taxes 6 Products are EMC compliant as a minimum, with certifications from several countries and regions. 7 Order require prepayment 8 Minimum led lifetime 30,000 hrs 9 Allow approximately 4 -6 weeks for delivery. 10 Shipping costs to be advised based on delivery port Disclaimer: Lucent LED Lighting will not be held responsible nor accept liability either directly or through a third party for any wrongful or inaccurate interpretation or use of information supplied. P.S : Commercial, Industrial, Marine, Aviaition and Militry Grade products are available on request basis.

Apps /Certification Compliant : CE & ROHS Consumer Code : CGU10 -5W Specification : 5W SMD GU10 400lm CRI>70 60°beam angle 50W halogen GU10 equivalent Non Dimmable & Dimable Watts : 5 Color : Warm White Neutral White Cool White Warranty (Years) : 2 Notes: 1OEM products, plain packaging with C-tick. 2 Minimum One year warranty offered on all products unless otherwise stated. 3 Warranty will be void if goods are not retuned for exchange in satisfactory condition or if due to inappropriate handing 4 Unless otherwise stated products are direct connect, wide voltage rated AC 86 - 265v (TBA on order specs) 5 Price quoted do not include local taxes 6 Products are EMC compliant as a minimum, with certifications from several countries and regions. 7 Order require prepayment 8 Minimum led lifetime 30,000 hrs 9 Allow approximately 4 -6 weeks for delivery. 10 Shipping costs to be advised based on delivery port Disclaimer: Lucent LED Lighting will not be held responsible nor accept liability either directly or through a third party for any wrongful or inaccurate interpretation or use of information supplied. P.S : Commercial, Industrial, Marine, Aviaition and Militry Grade products are available on request basis.