SMD inductor parameters:
Volume: 0402, 0603, 0805, 1206, 1210
Units: H, NH, UH, MH
Error: ±5%, ±10%
Packing: 4000PCS/disk, 3000PCS/disk above 1206
Current: the difference between small current and large current, unit A (ampere)
The chip inductors in our inventory are complete in specifications:
A complete range of conventional models, including: SMD magnetic beads, high current SMD inductors, SMD power inductors, high frequency inductors, SMD wire wound inductors, laminated inductors, common mode inductors, shielded inductors, I-shaped inductors, etc.; Conventional inductance, rated current and other parameters are in stock.
The role of chip inductors:
1. Filtering
Because it has the characteristics of passing DC and blocking AC, it can be used for power supply filtering;
2. Resonance
It can form a resonance frequency selection circuit with a capacitor, and the resonance frequency is determined by the size of the chip inductance and capacitance;
3. Frequency division
Can be used for frequency division of high and low frequency signals
Application fields of chip inductor products: Internet of things products, smart products, Internet products, communication products, 3D printers, etc.
Item Specifics: Model: PIM1030R12MZ L0(uH)/inductance at 0A,100KH):Typ.:0.12 DCR (mª+)at 25ípC:Typ.0.65/Max:0.75 Irated(Adc)/Heat RatingCurrent :Typ.:30 Isat(Adc)/Saturation Current:Typ.:75 Available L0(uH):From 0.12 to 10.00 Molded Power Inductor Operating temperature : -55íµ ~ +125íµ Ambient Temperature, Maximum : 85íµ Temperature Rise, Maximum: 40íµ Features Low profile, high current SMD type. Lowest DCR/µH, in this package size, low buzz noise due to its gap-less structure, RoHS compliant. Frequency range up to 5MHz. Lowest DCR/µH, in this package size Low buzz noise due to its gap-less structure RoHS compliant. Applications Notebook/Desktop/Server/Video Card applications. High current POL converters. Low profile, high current power supplies Battery powered devices. Ideal for power source circuits, DC-DC converter DC-AC inverters inductor application. Note: 1. L0 is inductance tested at 0 Adc. 2. Isat is the DC current which cause the inductance drop approximately 30% of its nominal inductance without current. 3. Irated is the DC current which cause the surface temperature of the part increase appproximately than 40íµ. 4. Operating Temperature Range: - 55íµ to +125íµ 5. The part temperature (ambient + temp rise ) should not exceed 125íµ under worse case operating conditions. Circuit design, component placement, PWB trace size and thickness, airflow and other cooling provision all affect the part temperature. Part temperature should be verified in the end application. 6. The rated current as listed is either the saturation current or the heating current depending on which value is lower.
Ll1608-fsl3n9s Toko make Pack:2k/reel Datecode:09+rohs L/t:1-7days Weight:0.2kg Reel package
SMD inductor parameters: Volume: 0402, 0603, 0805, 1206, 1210 Units: H, NH, UH, MH Error: 5%, 10% Packing: 4000PCS/disk, 3000PCS/disk above 1206 Current: the difference between small current and large current, unit A (ampere) The chip inductors in our inventory are complete in specifications: A complete range of conventional models, including: SMD magnetic beads, high current SMD inductors, SMD power inductors, high frequency inductors, SMD wire wound inductors, laminated inductors, common mode inductors, shielded inductors, I-shaped inductors, etc.; Conventional inductance, rated current and other parameters are in stock. The role of chip inductors: 1. Filtering Because it has the characteristics of passing DC and blocking AC, it can be used for power supply filtering; 2. Resonance It can form a resonance frequency selection circuit with a capacitor, and the resonance frequency is determined by the size of the chip inductance and capacitance; 3. Frequency division Can be used for frequency division of high and low frequency signals Application fields of chip inductor products: Internet of things products, smart products, Internet products, communication products, 3D printers, etc.
Ni-Zn Soft Ferrite Cores Emi suppression generated from round cable used in digital equipment. Emi/rfi suppression, plus and matching transferor, choke, input filters
Magnetic Shielded surface mount inductor with high current rating. Low Resistance to keep power loss minimum.
PAGOODA chip inductor introduction: Volume: 0402, 0603, 0805, 1206, 2520, 3225 4532, 5650 Sensitivity: 12NH, 15NH, 22NH, 39NH, 68NH 1R0K, 1R2K, 2R2K2R7K, 3R3K, 4R7K10uH, 15uH12uH18u22H1MH12MH 1.5MH18MH2.2MH...... Error: J=+5%K=±10%M=±20%, N=±30% Inductors used in power supply mounting and circuits are produced with metal composite materials or ferrite materials. It is mainly used for circuits that realize voltage conversion that requires a specific voltage to provide stable power for ICs. The corresponding inductor is used in the power supply circuit, maintains the inductance when the current allows, and has the characteristics of low square resistance. High Current Slow down saturation and maintain high current characteristics Low RDC Improves high current efficiency through low branch resistance PAGOODA high-end technology electronic component manufacturers, chip inductors have complete specifications, can provide samples, quality assurance, comprehensive technical support, welcome to inquire
Product name: I-shaped inductor Category: SMD inductor series Product introduction: Volume: 0402, 0603, 0805, 1206, 2520, 3225, 4532, 5650 Tolerance: I=�±7%, K=�±10%, L=�±15%, M=�±20% Sensation: 1.2N 1.5N 2.2N 3.9N 6.8N...... 1R0K 1R2K 2R2K 2R7K 3R3K 4R7Kâ?¦ 10u 15u 12u 18u 22uâ?¦ 1MH 1.2MH 1.5MH 1.8MH 2.2MHâ?¦ Features: 1. High dimensional precision wire wound inductors suitable for automatic placement; 2. Good solderability; 3. Heat-resistant resin encapsulation, with excellent mechanical strength; 4. Excellent Q value and high reliability; 5. Used in LCD TVs, computer drives, mobile phones, car audio and other electronic products. Order Hotline: 400-003-5559 I-shaped inductor, the role of the inductor, the inductance formula, the unit of the inductor, the chip inductor package, the inductor, the chip power inductor, the one-piece inductor, the chip inductor specification, the I-shaped inductor, the chip I-shaped inductor specification, Shielded I-shaped inductor, SMD inductor tdk, SMD inductor pdf, SMD inductor 47uh, SMD inductor 470, SMD inductor 330uh, SMD inductor 2.2uh, buy SMD inductor,
Product Name: Common Mode Inductor Product parameters (product overview) volume: 0402, 0603, 0805, 1206, 2520, 3225, 4532, 5650 Tolerance: I=±7%, K=±10%, L=±15%, M=±20% Sensitivity: 1.2N 1.5N 2.2N 3.9N 6.8N...... 1R0K 1R2K 2R2K 2R7K 3R3K 4R7K 10u 15u 12u 18u 22u 1MH 1.2MH 1.5MH 1.8MH 2.2MH Features: 1. High dimensional precision wire wound inductor suitable for automatic placement; 2. Good solderability; 3. Heat-resistant resin encapsulation with excellent mechanical strength; 4. Excellent Q value and high reliability; 5. Used in LCD TVs, computer drives, mobile phones, car audio and other electronic products.
Product name: I-shaped inductor Category: SMD inductor series Product introduction: volume: 0402, 0603, 0805, 1206, 2520, 3225, 4532, 5650 Tolerance: I=±7%, K=±10%, L=±15%, M=±20% Sensation: 1.2N 1.5N 2.2N 3.9N 6.8N...... 1R0K 1R2K 2R2K 2R7K 3R3K 4R7K 10u 15u 12u 18u 22u 1MH 1.2MH 1.5MH 1.8MH 2.2MH Features: 1. High dimensional precision wire wound inductors suitable for automatic placement; 2. Good solderability; 3. Heat-resistant resin encapsulation with excellent mechanical strength; 4. Excellent Q value and high reliability; 5. Used in LCD TVs, computer drives, mobile phones, car audio and other electronic products.
