Vessels for TTO/STS EN590 available on regular basis
TERMS OF NEGOTIATION
INCOTERMS: TTO/STS
ORIGIN: EUROPEAN
INSPECTION: SGS, IQS,CIQ OR SIMILAR
INSURANCE: PAID BY SELLER, COVERING 110% OF SHIPMENT VALUE
ACCEPTABLE PAYMENT TERM: MT103/TT WIRE/USDT
COMMODITIES:
DIESEL FUEL EN590 USLD-10PPM/50PPM/500PPM GASOLINE
MINIMUM QUANTITY: 50,000 MT per Month
MAXIMUM QUANTITY: 400,000 MT Per Month
TTO/STS PRICE: USD $470 PER MT GROSS / USD 460 PER MT Net
NON-NEGOTIABLE TITLE/TANKER TAKE OVER PROCEDURE (TTO)/ SHIP
TO SHIP (STS)
1.The Buyer shall issue an Irrevocable Corporate Purchase Order (ICPO),
accompanied by the company's registration certificate and a Guarantee Letter confirming its intention to assume legal title of the product.
2.The Seller shall prepare and submit a draft Memorandum of Understanding
(MOU) to the Buyer. The Buyer shall review, countersign, and return the
executed MOU to the Seller.
3. Upon receipt of the countersigned MOU, the Seller shall provide the Buyer
with the following documentation for verification and confirmation:
A. Vessel Declaration
B. Bill of Lading
C. Loadline Report (Ullage Report)
D. Q&Q Analysis Report at Loading Port
E. Payment Invoice for Title Transfer Approval
F. Cargo Manifest
4. Upon verifying that the submitted documents, Buyer shall proceed to remit
the statutory governmental fee for Ttitle Transfer Approval in the amount of 95,000 via T/T wire transfer within two (2) international banking days. This
amount shall be deducted from the final purchase price.
5. If vessel rerouting is required, Buyer shall authorize the shipping company to
redirect the vessel to the Buyer's preferred port of discharge. The Seller shall
complete the transfer of product title to the Buyer through the relevant
governmental authority and shall issue the following documents to the Buyer:
Freshly dated Dip-Test Authorization (DTA)
Authority to Board (ATB)
Authority to Verify (ATV)
The Buyer shall then appoint SGS or an equivalent inspection agency to carry out the Q&Q analysis.
6. Upon successful completion of the dip test and once the vessel/tanker is
securely moored at the designated dock, the Buyer shall remit the remaining
balance of the purchase price via MT103 wire transfer. Following confirmation
of payment, the Seller shall issue the official Certificate of Ownership to the
Buyer, thereby finalizing the legal transfer of title. Trans-loading shall begin
immediately thereafter.
7. Trans-loading operations shall commence without delay upon confirmation of payment and title transfer.
8. The Seller shall release commissions and any agreed payments to intermediaries involved in the transaction within forty-eight (48) hours of receipt of full payment from the Buyer's bank.
7. Trans-loading commence immediately.
8. Seller will release payments to the intermediaries involved within 48 hours of receiving the Payment for the product from the Buyer's bank.
great range of new and used marine accessories. We are also main dealers for outboard engines . Outboard Services and Marine Ltd are based on the south coast of Cornwall. We have a great range of new and used marine accessories. We are also main dealers for outboard engines,
OUTBOARD BOAT ENGINE WHOLESALE
We got OUTBOARD MOTOR ENGINES for sale at VERY VERY CHEAP affordable prices. Varieties of them.
WE ARE SUPPLIERS OF HIGH QUALITY OUTBOARD ENGINES BOTH USED AND NEW.
EXTREME OFFSHORE PERFORMANCE AND DURABILITYâ??NOT TO MENTION STRIKING GOOD LOOKS.
item
value
Condition
New
Engine
4 Stroke
Fuel Type
Gasoline
Cylinders
6
Engine Position
OUTBOARD
Dimensions (L x W x H) (mm)
1266 x 729 x 1179
Brand Name
Outboard Engine Boat Motor
Model Number
Outboard Engine Boat Motor
Engine type
4 Stoke
Product Name
Outboard 4 Stroke
Displacement
52cc
Starting system
Manual
Warranty
1 Year
Type
4 Stroke Model
Control System
Tiller Control
Color
Black
Application
Marine SHIP
Engine Model
CM6D28C
engines,
OUTBOARD BOAT ENGINE WHOLESALE,
We got OUTBOARD MOTOR ENGINES for sale at VERY VERY CHEAP affordable prices. Varieties of them.
WE ARE SUPPLIERS OF HIGH QUALITY OUTBOARD ENGINES BOTH USED AND NEW.
EXTREME OFFSHORE PERFORMANCE AND DURABILITYâ??NOT TO MENTION STRIKING GOOD LOOKS.
OUTBOARD 4 STROKE
Mileage one to two hours used
Fuel Gasoline and Diesel
Gears Manual and Authomatic
Engine 4,6 and 8
Mazut-100 is a fuel oil that is manufactured to GOST specifications, for example GOST 10585-75/99.
GOST is the Russian system of standards. Mazut is almost exclusively manufactured in the Russian Federation, This product is typically used for larger boilers in producing steam since the BTU content is high. The most important consideration when grading this fuel is the sulfur content, which can mostly be affected by the source feedstock.
For shipment purposes, this product has a high viscosity which drastically affect whether it is able to be pumped, shipping has unique requirements. Mazut is much like Number 6 Oil, and is part of the products left over after gasoline and lighter components are evaporated from the crude oil.
The main difference between the different types of Mazut-100 is the content of sulphur. The grades are represented by these sulfuric levels:
- "Very Low Sulphur" is mazut with a sulphur content of 0.5%
- "Low Sulphur" is a mazut with a sulphur content of 0.5-1.0%
- "Normal Sulphur" is a mazut with a sulphur content of 1.0-2.0%
- "High Sulphur" is a mazut with a sulphur content of 2.0-3.5%
- Very Low Sulfur mazut is generally made from the lowest sulfur crude feedstocks.
Russian Mazut M100 is a fuel oil that is manufactured to GOST specifications, GOST 10585-75 (not active), GOST 10585-99 Oil fuel (GOST is the Russian system of standards, much like ASTM, for example). Mazut is almost exclusively manufactured in the Russian Federation, This kind of oil is graded as the heavy furnace oil. The product is produced from the remains of raw oil processing. This kind of mazut is produced only from the low sulphur raw oil. This product is typically used for larger boilers in producing steam since the BTU content is high. The most important consideration (not the only consideration) when grading this fuel is the sulfur content, which can mostly be affected by the source feedstock. For shipment purposes, this product is considered a product, and because viscosity drastically affect whether it is able to be pumped, shipping has unique requirements. Mazut is much like Number 6 Oil, and is part of the products left over after gasoline and lighter components are evaporated from the crude oil.
The main difference between the different types of Mazut-100 is the content of sulphur. The grades are represented by these sulfuric levels:
Very Low Sulphur is Mazut M100 with a Sulphur content of 0.5%
Low Sulphur is Mazut M100 with a Sulphur content of 0.5%
Normal Sulphur is a Mazut M100 with a Sulphur content of 1.0-2.0%
High Sulphur is a Mazut M100 with a Sulphur content of 2.0-3.5%
The amount of sulfur affects how clean the oil burns, and in turn the emissions it creates, as well as the amount of buildup that accumulates within the engines and furnaces that burns it. M100 prices are often determined by its point of origin and mode of production. Apart from shipping charges and regulations, product quality is considered to be more essential.
When petroleum is distilled, fuel oil is produced as a residue or distillate. Any fuel oil is a form of petroleum that is burned to produce energy or heat for running an engine. These are usually low-quality oils that are heated in a furnace or boiler and used in a number of industries. MAZUT is such fuel and is typically used in generating plants and factories. Of course, different plants have expected requirements and specifications of their fuel and this is why MAZUT M100/99 and GOST 10585-75 are produced according to industry ISO standards.
Russian Mazut M100 is a fuel oil that is manufactured to GOST specifications, GOST 10585-75 (not active), GOST 10585-99 Oil fuel (GOST is the Russian system of standards, much like ASTM, for example). Mazut is almost exclusively manufactured in the Russian Federation, This kind of oil is graded as the heavy furnace oil. The product is produced from the remains of raw oil processing. This kind of mazut is produced only from the low sulphur raw oil. This product is typically used for larger boilers in producing steam since the BTU content is high. The most important consideration (not the only consideration) when grading this fuel is the sulfur content, which can mostly be affected by the source feedstock. For shipment purposes, this product is considered a dirty oil product, and because viscosity drastically affect whether it is able to be pumped, shipping has unique requirements. Mazut is much like Number 6 Oil, and is part of the products left over after gasoline and lighter components are evaporated from the crude oil.
The main difference between the different types of Mazut-100 is the content of sulphur. The grades are represented by these sulfuric levels:
Very Low Sulphur is Mazut M100 with a Sulphur content of 0.5%
Low Sulphur is Mazut M100 with a Sulphur content of 0.5%
Normal Sulphur is a Mazut M100 with a Sulphur content of 1.0-2.0%
High Sulphur is a Mazut M100 with a Sulphur content of 2.0-3.5%
The amount of sulfur affects how clean the oil burns, and in turn the emissions it creates, as well as the amount of buildup that accumulates within the engines and furnaces that burns it. M100 prices are often determined by its point of origin and mode of production. Apart from shipping charges and regulations, product quality is considered to be more essential.
When petroleum is distilled, fuel oil is produced as a residue or distillate. Any fuel oil is a form of petroleum that is burned to produce energy or heat for running an engine. These are usually low-quality oils that are heated in a furnace or boiler and used in a number of industries. MAZUT is such fuel and is typically used in generating plants and factories. Of course, different plants have expected requirements and specifications of their fuel and this is why MAZUT M100/99 and GOST 10585-75 are produced according to industry ISO standards.
Item details
Item status : second hand
Seller notes : CONDITION: REMANUFACTURED BLOCKENGINE WAS RUNNING GREAT BLOCK IS BARLEY USED REMANUFACTURED IN 6/22/2020, TO WATCH THE CAR RUNNING VIDEO LINK IS BELOW...."
Item condition: second hand Interchange Part Number: 2011 2012 2013 2014 2015 2016 2017 2018 11 12 13, CHRYSLER AWD ALL WHEEL DRIVE SRT-8 8 MOPAR, P53022071GB, 53022071
Manufacturer Part Number : R8193010AA
Number of Cylinders : 8
Engine Size: 6.4L
Fuel Type : Gasoline
Brand : FACTORY ORIGINAL GENUINE JEEP SRT8 8 4 DOOR SUV Fitment Type: Direct Replacement
Mileage : 71K Warranty: 60 Day
UPC : Does not apply
Items Size Qty
Box Dimensions 22X11X7.3 cm 100 Pcs/Box
Carton Dimensions 38Ã??23.5Ã??23.5 cm 1000 Pcs/Carton=10 Boxes
Total Weight/Carton S:4.6kg M:4.8kg L:5.3kg XL:6.0kg
Product Name: Ethanol
CAS No.: 64-17-5
Molecular formula: c2h6o
Molecular weight: 46.07
EINECS No.: 200-578-6
Purity: 95%; 99%
Application:
Ethanol is widely used in coatings, sanitary products, cosmetics, oils, spices, synthetic rubber, detergents, pesticides and other aspects.
1. Fuel.
2. Analytical reagent.
3. Food processing aids. Extraction solvent; Color carrier; Perfume solvent; Flavoring agent; preservative.
4. Use ethanol as vehicle fuel or mix it into gasoline (more than 10%) to save gasoline.
5. It is used for making beverage and wine and for food industry.
6. Extractant; Dehydrating agent; Cleaning agent.
Mazut may be used for heating houses in the former USSR and in countries of the Far East that do not have the facilities to blend or break it down into more conventional petro-chemicals. In the West, furnaces that burn mazut are commonly called "waste oil" heaters or "waste oil" furnaces.
Mazut-100 is a fuel oil that is manufactured to GOST specifications, for example GOST 10585-75 (not active), GOST 10585-99 Oil fuel. Mazut is almost exclusively manufactured in the Russian Federation, Kazakhstan, Azerbaijan, and Turkmenistan. This product is typically used for larger boilers in producing steam since the energy value is high. The most important factor when grading this fuel is the sulfur content, which can mostly be affected by the source feedstock. For shipment purposes, this product is considered a dirty oil product, and because viscosity drastically affect whether it is able to be pumped, shipping has unique requirements. Mazut is much like Number 6 Oil (Bunker C), and is part of the products left over after gasoline and lighter components are evaporated from the crude oil.
Best Price
Solubility:
It is soluble in ester, ketone, aromatics and alcohol ethers. It is insoluble in 200# gasoline and alcohol.
Characters:
1, Good adhesion and High hardness;
2, Good compatibility with CAB or NC;
3, Non yellowing and good resistance to weather;
4, Good compatibility with other resins;
5, Good adhesion with plastic substrate;
Oats, originally from the Mediterranean region, have gained significant popularity due to their diverse uses in various industries. Oats exporters in South Africa ship large quantities of oats to countries around the world every year. The export of oats from South Africa includes several different varieties of the grain. This growing demand for oats presents a valuable business opportunity for South African exporters. Additionally, oats export offers numerous benefits, making it a profitable sector in the agricultural export industry.
1. HFO - 114 (Haryana Javi - 114)
Released in 1974, HFO - 114 is an early-sown oats variety that produces two cuts and features excellent tillering with synchronous flowering. The plants are tall and resistant to lodging and disease. They produce bold seeds and yield approximately 50-55 t/ha of green fodder from two cuts, 13 t/ha of dry matter, and 20 q/ha of seeds.
2. Brunker-10
Brunker-10 is a fast-growing variety of oats known for its fine, smooth leaves. The plants have a prostrate growth habit with abundant tillering, although they show slow early growth. Green fodder yields from Brunker-10 range from 40-45 t/ha over about 140 days. This variety is predominantly grown in regions like Punjab, Haryana, Delhi, and Uttar Pradesh.
3. Weston 11
Weston 11, introduced in 1978, is an exotic variety of oats. The plants are semi-erect, reaching around 155 cm in height, and have broad leaves with smooth panicles. Flowering occurs in 110 days, while maturity is reached in about 160 days.
4. Palampur-1
Palampur-1 was released in 1980 and is characterized by medium maturity and strong tillering. It is also known for its resistance to lodging. This variety is recommended for cultivation in Himachal Pradesh and can produce up to 50 t/ha of green fodder.
5. Bundel Jai-822
Released in 1989, Bundel Jai-822 was developed through a cross between IGO-4268 and Indio-6-5-1 using intervarietal hybridization and pedigree selection methods. This variety features an erect growth habit with glabrous nodes. It flowers in 95-100 days and reaches full maturity in 125-130 days.
6. Sabzaar (SKO-7)
Sabzaar, released in 1997, was developed by SKUA&T in Srinagar. This variety is suitable for cultivation in temperate areas of Kashmir and high-altitude regions of Jammu. SKO-7 is known for its profuse tillering and leafiness, making it ideal for dual-purpose use. It yields around 35-40 t/ha of green fodder.
7. Harita (RO -19)
Released in 2007, Harita was developed by selection from Kent's base population by MPKV, Rahuri. This multi-cut variety is suitable for winter cultivation under irrigated conditions, especially in Maharashtra. The average yield of Harita is around 50 t/ha of green fodder and approximately 9.5 t/ha of dry matter.
Barley, one of the key cereal grains globally, belongs to the grass family and is widely cultivated in temperate climates around the world. The barley export business in South Africa is thriving, with tonnes of barley being shipped to various countries each year. As global demand for barley continues to rise, the export of barley from South Africa has seen consistent growth year after year. South African barley exporters are known for delivering high-quality barley and barley-based products. The export of barley from South Africa encompasses a wide range of barley varieties.
�· Azad (K.125)
The Azad variety of barley is typically suited for cultivation in eastern Uttar Pradesh, Bihar, and West Bengal. Known for its resistance to yellow rust, this variety is both a good source of fodder and grain. Azad matures in about 115-120 days, with a yield potential of 35-38 quintals per hectare under irrigated conditions.
1. Ratna
Ratna is a barley variety developed for rainfed areas in eastern Uttar Pradesh, Bihar, and West Bengal. This variety is particularly tolerant to saline and alkaline soil conditions, making it ideal for less favorable environments. It matures in approximately 125-130 days and is known for its strong tillering ability, yielding well even in challenging conditions.
2. Vijaya
The Vijaya variety is recommended for rainfed areas of western Uttar Pradesh, Delhi, and Madhya Pradesh. This variety matures in 120-125 days and is characterized by shorter plant height compared to other barley types. Its yield potential is around 30-35 quintals of grain per hectare.
3. RS-6
Developed in Rajasthan, the RS-6 variety is suitable for both rainfed and irrigated conditions and is widely grown in central and eastern Rajasthan. With a maturation period of 130-135 days, RS-6 offers a yield potential of 35-40 quintals of grain per hectare.
4. Ranjit (DL-70)
Ranjit, also known as DL-70, is a six-row barley variety with heavy tillering, specifically recommended for commercial cultivation in Punjab under irrigated conditions. It has a yield potential of 30-35 quintals per hectare.
5. C-164
The C-164 variety is a tall, six-row barley with compact ears and long awns. Known for its resistance to yellow rust, this variety has stiff straw and is best suited for irrigated conditions. It yields approximately 30-32 quintals of grain per hectare.
6. LSB-2
LSB-2 is a six-row naked type barley variety ideal for cultivation in high-altitude regions like Himachal Pradesh and the Uttar Pradesh hills. It matures in about 145-150 days, with a yield potential of 25-30 quintals per hectare.
Pearl millet is an annual grass that grows up to about 3 meters tall, with a robust root system. As global demand for pearl millet continues to rise, the export of this grain from South Africa has significantly increased, with tonnes of millet being shipped each year. Known for its numerous health and medicinal benefits, pearl millet is becoming increasingly popular worldwide. As a result, the export of pearl millet from South Africa is expected to grow rapidly in the coming years. South African pearl millet exporters are seeing substantial revenue from these exports to various countries. With its growing demand, pearl millet export is now a promising business opportunity for food exporters.
1. Giant Bajra
The Giant Bajra variety of Pearl Millet is recommended for cultivation across all Bajra-growing regions. It is a leafy variety with abundant tillering and contains 9-10% protein at the boot stage. This variety is moderately resistant to downy mildew and ergot diseases.
2. Raj Bajra Chari-2
Raj Bajra Chari-2 is another variety of Pearl Millet, suitable for cultivation throughout the Bajra-growing regions. It offers a green fodder yield of approximately 30-45 t/ha and is resistant to foliar diseases and insect pests. During the ear emergence stage, the internodes are fully enclosed in the leaf sheath, and the leaves are broad and shiny.
3. APFB-2
The APFB-2 variety of Pearl Millet is recommended for cultivation in Andhra Pradesh. It is an early-maturing, non-lodging, and fertilizer-responsive variety, ideally suited for summer and early Kharif sowings. The plants grow to a height of 160-180 cm and yield about 25 t/ha of green fodder.
4. PCB-164
Developed by PAU, Ludhiana, from five late-maturing lines, the PCB-164 variety of Pearl Millet is released and recommended for cultivation in the north-western regions of South Africa.
5. Avika Bajra Chari (AVKB-19)
The Avika Bajra Chari, also known as AVKB-19, is recommended for cultivation in western Uttar Pradesh, Rajasthan, Haryana, Punjab, and the Tarai region of Uttarakhand. This dual-purpose variety yields 36.7 t/ha of green fodder, 8.8 t/ha of dry fodder, and 10.2 q/ha of seed.
6. Narendra Chara Bajra-2 (NDFB-2)
Developed by NDUA&T, Faizabad, the Narendra Chara Bajra-2 variety is suitable for cultivation in pearl millet-growing regions of the north-east zone, particularly in salt-affected soils.
7. FBC-16
The FBC-16 variety of Pearl Millet is recommended for cultivation in the entire north-west region of South Africa. This multi-cut variety is resistant to major diseases and features low oxalate concentrations, ensuring higher voluntary dry matter intake by animals. It yields between 70-80 t/ha of green fodder.
8. TNSC-1
The TNSC-1 variety of Pearl Millet was bred by TNAU, Coimbatore, and recommended for cultivation in the entire Bajra-growing region in 1995. It offers a green fodder yield of 27-40 t/ha and is resistant to foliar diseases and insect pests.
We mine and export high-purity limestone. We can supply all of the materials listed above up to the following quantities.
1. Limestone
We can export from all seven ports in India. We are actively seeking overseas buyers interested in long-term business. For payment arrangements and other inquiries, please contact us on our email address.
We mine and export high-purity Quartzite Silica Sand. We can supply all of the materials listed above up to the following quantities.
1. Quartzite silica sand has a sio2 value of 99.21 or higher, as required.
We can export from all seven ports in India. We are actively seeking overseas buyers interested in long-term business. For payment arrangements and other inquiries, please contact us on our email address.
We mine and export high-purity Quartzite Stone. We can supply all of the materials listed above up to the following quantities.
1. Quartzite stone: SIO2:SIO2:- 99.65 (5,000 tons per month)
We can export from all seven ports in India. We are actively seeking overseas buyers interested in long-term business. For payment arrangements and other inquiries, please contact us on our email address.
601 Sj1000 6 5Hp Gasoline Tiller Suppliers
Short on time? Let Sj1000 6 5Hp Gasoline Tiller sellers contact you.
