The Single Band LTE Repeater is a cell phone signal booster system made up of antennas, cable and a signal amplifier that takes an existing cell signal, typically found outside your home or office, amplifies the signal and then broadcasts it to an inside area that has a weak or no signal.In order for the system to work, there must be an existing, stable outside signal for the system to receive and amplify It can be applied at meeting rooms, conference rooms, museums, galleries, theaters, concert halls, churches, temples, restaurants, classrooms, training centers, factories, banks, trains, bus and more Places that require silence, confidentiality and information security
A mobile phone signal repeater provides the ultimate solution in any area where cellular communications can not work well due to leak of signals. The repeater device features easy installation & operation, build-in indoor antenna and no interference. It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cellphones. A mobile phone repeater is ideal for house, home, office use.
Dual Band LTE Repeater also known as cell phone repeaters were developed to address the two factors that cause poor cell phone reception. They're designed to amplify a weak outside signal and bypass any obstructions to provide a strong inside signal to an area that was originally lacking.The system works by mounting an outside antenna in a location that currently has signal, which is typically on the roof. The signal is passed from the outside antenna, by a cable to a signal amplifier inside the building. Once the signal is amplified, it is then sent to an inside antenna, where it is broadcast out to the area which needs better reception. The system also works in reverse, with the signal from your phone being amplified and broadcast back to the tower, ensuring strong, two-way communication.
Dual-Band LTE Repeater is used to improve network coverage of mobile phone in home and offices.Dual-Band LTE Repeater is a complete network coverage solution for areas which face problems like disturbance in call, call drops and less network signals. Dual-Band LTE Repeater is placed at a network rich area from where it catches signals from the nearest tower and these signals are transmitted to the area facing the signal problem.It can be applied at meeting rooms, conference rooms, museums, galleries, theaters, concert halls, churches, temples, restaurants, classrooms, training centers, factories, banks, trains, bus and more Places that require silence, confidentiality and information security
10dBm power, 65dB gain, covering 10 ~ 100 square meters. Standard exporting carton, foam case.
Quality Copper Cathode Grade A Purity Cathode Copper 99.99% Copper Cathode/copper Cathodes Price Copper Cathode Grade A Purity: Purity 99.97% - 99.99% Min Specifications Competitive & Reliable Price Excellent Customer Service Outstanding Delivery Reliability 1. Typical Specifications - Product: Copper Cathodes Grade A (electrolytic Copper Grade) (lme Standards) Standard Cu Cathode-1, Purity 99.99% Dimension: 914mm X 914mm X 12mm (lme Standards) Weight Of Each Sheet: 125kgs (+/- 1%) Net Weight Of Each Pallet: 2mts (+/- 1%) Min. Weight In Each Container: 20mts Approx. Gross Weight Of Each Container: 22.20mts Approx. Packing: Palletized Banded By Aluminum Bands 2. Chemical Composition Copper (cu) : Min% 99.99% Other Materials May Be Present Which Are Described Below: Oxygen O2 -- Sulfur S:.............................. 4 Ppm Iron Fe:..............................2 Ppm Silver(argent) Ag::..............................10 Ppm Lead Pb:..............................0.2 Ppm Nickel Ni:..............................0.2 Ppm Selenium Se:..............................0.3 Ppm Antimony Sb:..............................0.1 Ppm Silica Si:..............................0.3 Ppm Cobalt Co:..............................0.2 Ppm Arsenic As:..............................0.1 Ppm Bismuth Bi:..............................0.1 Ppm Manganese Mn:..............................0.1 Ppm Tellurium Te:.............................. 0.05 Ppm Aluminum Al:.............................. 0.5 Ppm Magnesium Mg:.............................. 0.4 Ppm Zinc Zn:.............................. 0.4 Ppm Packaging: Steel Belt Packed, Single Bundle Weighs About 2500 Kilograms. Hts Code 7403.11 Price = Us$ 5,400 Cif Origin: South Africa Min Order: 50 Tons
The signalwing's j3f-a-20 is specially designed for small or medium sized indoor area, such residential, offices, inner large building or suburb low traffic location with poor connection. Elegant in it's design, it's one of the best cost effective solutions. The j3f-a-20 mini repeater works sufficiently and reliably to optimize cell phone reception for any relevant system in gsm, cdma, wcdma or 4g lte. System status is clearly visible by led indicators. The light weight and compact size makes it ideal for easy installation. The coverage of j3f-a is ranging from 500~1500 square meters due to different 5. Automatic gain control and manual gain control. 6. Intelligent mode setting, automatically set the values. 7. Auto shut off function available to avoid the damage and interference in unusual signal conditions. 8. Easy installation & maintenance. 9. Extend cell phone battery life. Power supply Ac:110~240v; dc: 9v/4a Operating temperature -10¡æ~50¡æ Environment conditions Ip30 Dimensions (d x w x h ) 186*122*65mm Weight ¡ü2kg
Features: 1. Superb linear performance. 2. High output power with water-resist housing. 3. Designed for outdoor application. 4. Automatic gain control and manual gain control. 5. Easy installation & maintenance. 6. Extend cell phone battery life. Power supply Ac:110~220v; 50/ 60 hz Operating temperature -25¡æ~50¡æ Environment conditions Ip65 Dimensions (d x w x h )453.6*357.8*159.7 mm Weight ¡ü22kg
Tests to 160 Degrees Fahrenheit The temperature measurement is visible by the thermocromatic color-change band on the label. When the wash cycle reaches 160 degrees Fahrenheit, the band changes colors from blue to orange. The label measures temperatures within +/- 2 degrees Fahrenheit. Ideal for Record-Keeping After use, the label is easily removed and added to the facility\'s records. Because it features 2 blanks, one for a signature and another for a date, the label makes logging the temperature of your machine fast, easy, and accurate. With the label on record, you can efficiently monitor the performance of your dish machine and ensure that all dishes are properly washed prior to use. Easy to Apply The label features an adhesive backing to easily stick to a dry item, such as a glass or plate, prior to the item being loaded into the dish machine. From there the label, which is waterproof, is run through the machine and measures the temperature during the wash cycle. It is for a single use only. Additional information Weight 0.01 lbs Quantity 24/Pack Type Temperature Test Strips Features Waterproof Maximum Temperature 16
1. Introduction "3g/lte home repeater" is a smalls-sized repeater for home use consists of patch antenna, link cable, repeater body, service antenna and adaptor. Due to its auto gain control and isolation check function, easy installation is possible without test equipment or technician. In addition, this product can be simply connected to pc and smartphone through its mini-usb port, and dedicated application for smartphone is provided. Service antenna is possible to be extended with extra cable. 3g/lte home repeater" has followings key features; -, supports 1.8 or 2.1ghz wcdma & lte -, high reliability & quality proven by korea telecom -, 57db gain, dl 9dbm / ul 19dbm output power -, easy installation by built-in agc, isolation check & auto shut down feature -, uplink sleep mode reduce the bts noise floor -, dedicated pc gui and smartphone application by usb port -, compact size of 128mm * 136mm * 31mm -, fancy cosmetic design fit with your beautiful home interior 2. Application -, home use
Wireless repeater--cdma broad band repeater Cdma signal repeater including full band repeater, band selective repeater; frequency selective repeater; fiber opital repeater; frequency shifting repeater. Today we draw your attention to our cdma band selective repeater. Specification: 1)frequency range: Uplink 825~835mhz Downlink 870~880mhz 2)output power: >30dbm 3)gain: >85db 4)noise figure:
Secondary Camera Resolution 5 MP RAM Size 2 GB Battery Size 4000 mAh Internal Memory 32 GB Screen Size 8 in Colour Name Black SIM Count No SIM Card SIM Type No SIM Card Connection Type Wifi Display Type HD Display Resolution Type HD Operating System Version Android 12 Operating System Android Network Type Wi-Fi Secondary Camera 5 - 7.9 MP Network Frequency Band WiFi Processor Name Quad-Core Number of Cores Quad Core Primary Camera Feature Single Flash Yes Wireless Wireless Primary Camera (MP) 5
Characteristic: *Monitoring System Can update on lacal or Remote. *Never selfoscillation *To have the function which the Fiber Optical Repeater does not have *Using the omnidirectional antenna to enlarge the coverage *One Master can work with more Slaver *High reliability,MTBF more than 100 thousands hours *Perfect Remote and Local Monitoring System.
Electrical Frequency Range 698-960/1710-2700MHz Band width 262/990MHz F/B Ratio ï¼?20dB Gain 5/7dBi V.S.W.R â?¤2.0 Radiation Direction Horizontal Beam width 68° Vertical Beam width 58° Polarization Vertical Lightning Protection DC-Grounded Maximum Input Power 50W Impedance 50Î� Connector N Female Cable Type RG58U Cable Length 30cm Antenna Radome Material ABS Mount way Wall Mount Or Pole Mount Diameter of Installation Pole Ã?30-Ã?50mm Mechanical Dimensions 207Ã?180Ã?45mm Weight 0.5KG Rated wind velocity(m/s) 60 Operating Temperature -40â?? to+70â?? RoHS Compliant YES
1. Introduction The LMPRF3030DS On-Frequency Repeater has been designed for indoor operation that is used to enhance 4G LTE signal strength in small and medium sized shadow areas such as building or a parking lot. 2. Key Performance and Features Supports 850MHz & 2.1GHz or 2.1GHz LTE Only GSM900/1800, CDMA 800/2100, LTE 1800/2100 Band also Available Consists of Two Unit by DL and ULSupports WCDMA Standards Easy Set Up by Auto Gain Control Function Auto Isolation Check between Donor & Remote Antenna Reverse Auto Sleep to Reduce BTS Noise Floor High Gain of 95dB Gain & 30dBm Output Single Housing for 2.1GHz and Extension Housing for 850MHz High Reliability & Quality proven by LG U+ Telecom in Korea Optional Remote Monitoring and Control via Wireless Data Modem 3. Application Medium Sized Office Buildings Shopping Center Parking Lot
Bouffant (Single ribbon) Disposable bouffant, protective cap, in PP 10 gsm with single elastic band. SKU: TR1078 Color - Blue Material - PP 11 g Product Weight - 11 G Packed In Box - No Polybag - 100 pcs per PE bag Qty In Inner Carton Qty Per Outer Carton - 1000 Pcs Carton Gross Weight - 3,5 Kg Country Of Origin - China
Disposable surgical mask Type IIR sterile with tie bands Sterile liquid repellent surgical mask. Masks in three layers for single use in healthcare. Adjustable nose clip and approx 37 cm tie bands. CE marked and approved according to EN14683: 2019. ISO 22609:2004. 20 pcs / box. SKU: TR2183 Color - Blue Material - Nonwoven PP + Filter PP + Nonwoven PP Product Height - 95 Mm Product Width - 175 mm Product Weight - 3 G Packed In Box - Yes Polybag - No Statistic Code - 6307909100 Qty Per Outer Carton - 2500 Pcs Carton Weight - 65 X 47 X 39 Cm Carton Gross Weight - 12 Kg Delivery Time - Approx 3 Work Weeks Country Of Origin - China
Universal ku band single lnb 10.7 to 12.75 ghz wide ku band range Voltage tolerance design for different receivers High efficient and low phase noise Weather protection plastic cover attached Low consumption
According to the structure, pole band include single offset pole band and double offset pole band. Jing Young pole bands are used to wrap on the pole. Jing Young pole fastening clamp can be used with guy wire, stay wire and cable .
Intended Use The One Step HAV IgG/IgM Test is a rapid chromatographic immunoassay for the qualitative detection of antibodies (IgG and IgM) to Hepatitis A Virus (HAV) in Whole Blood /Serum / Plasma to aid in the diagnosis of Hepatitis A Virus. Summary Hepatitis A is an acute, usually self-limiting disease of the liver caused by hepatitis A virus (HAV). HAV is transmitted from person to person, primarily by the faecal-oral route. The incidence of hepatitis A is closely related to socioeconomic development, and seroepidemiological studies show that prevalence of anti-HAV antibodies in the general population varies from 15% to close to 100% in different parts of the world. One step HAV IgG/IgM Test is a simple, visual qualitative test that detects Hepatitis A Virus antibodies in human Whole Blood /Serum / Plasma. The test is based on immunochromatography and can give a result within 15 minutes. Principle The One Step HAV IgG/IgM Test is a qualitative membrane strip based immunoassay for the detection of Hepatitis A Virus antibodies (IgG and IgM) in Whole Blood /Serum / Plasma. The test device consists of: 1) a burgundy colored conjugate pad containing HAV recombinant envelope antigens conjugated with Colloid gold (HAV conjugates) and rabbit IgG-gold conjugates,2) a nitrocellulose membrane strip containing two test bands (T1 and T2 bands) and a control band (C band). The T1 band is pre-coated with the antibody for the detection of IgM anti-HAV, T2 band is coated with antibody for the detection of IgG anti-HAV, and the C band is pre-coated with goat anti rabbit IgG. When an adequate volume of test specimen is dispensed into the sample well of the test cassette, the specimen migrates by capillary action across the cassette. IgG anti-HAV, if present in the specimen, will bind to the HAV conjugates. The immunocomplex is then captured by the reagent pre-coated on the T2 band, forming a burgundy colored T2 band, indicating a HAV IgG positive test result and suggesting a recent or repeat infection. IgM anti-HAV if present in the specimen will bind to the HAV conjugates. The immunocomplex is then captured by the reagent coated on the T1 band, forming a burgundy colored T1 band, indicating a HAV IgM positive test result and suggesting a fresh infection. Absence of any T bands (T1 and T2) suggests a negative result. The test contains an internal control (C band) which should exhibit a burgundy colored band of the immunocomplex of goat anti rabbit IgG/rabbit IgG-gold conjugate regardless of the color development on any of the T bands. Otherwise, the test result is invalid and the specimen must be retested with another device. Storage and Stability Store as packaged in the sealed pouch at room temperature or refrigerated (4-30 or 40-86). The test device is stable through the expiration date printed on the sealed pouch. The test must remain in the sealed pouch until use.
