F10F Single Band Repeater

2017 high quality new 2g cellphone gsm repeater 900mhz mobile phone gsm900 signal repeater cellphone signals booster amplifier

Cellular gsm repeater 900mhz booster

* model AT980

* used in mobile 2g gsm signal amplifier

* 1 year guarantee after shipping

* max. square meters: about 50-150 sq.m

Package including:

* 1 pc of AT980 repeater

* 1 pc of 9 unit yagi antenna

* 1 pc of indoor ceiling antenna

* 1 pc of 5v2a eu plug (or please inform us plug type: eu/ek/us/au)

* 1 pc of cable (about 9 to 10 meters)

Specification:

* Frequency range: uplink (890~915mhz); downlink (935~960mhz)

* Gain: uplink (60+3db); downlink (65+3db)

* Power: -70 ~ -40 dbm / FA (1.23mhz)

* Max. output power: 23dbm + 3dbm total power

* Yagi antenna: 13db / Indoor ceiling antenna: 5db

* Noise figure: about 4db

* Seclusion: > 70db

* Power supply: ac110~220v, 45~55Hz

* Compact design: indoor use

NOTE:

* It is for one room use, or you can buy splitter and extra ceiling antennas for more rooms using.

* Make sure there is good signal ourside or on the roof to gain signal from signal tower.

* Please check the installing diagram and install it correctly. if there is any problem, please kindly contact with us.

2017 high quality repetidor de sinal de celular CDMA 850 mhz celular repeater 850mhz mobile phone cdma850 signal booster amplifier

Repetidor de sinal de celular CDMA 850 mhz

* model cdma850

* used in cell phone cdma850mhz signal amplifier

* 1 year guarantee after shipping

* max. square meters: about 50-150 sq.m

Package including:

* 1 pc of cdma850

* 1 pc of 9 unit yagi antenna

* 1 pc of indoor ceiling antenna

* 1 pc of 5v2a eu plug (or please inform us plug type: eu/ek/us/au)

* 1 pc of cable (about 9 to 10 meters)

Specification:

* Frequency range: uplink (824~849mhz); downlink (869~894mhz)

* Gain: uplink (60+3db); downlink (65+3db)

* Power: -70 ~ -40 dbm / FA (1.23mhz)

* Max. output power: 23dbm + 3dbm total power

* Yagi antenna: 13db / Indoor ceiling antenna: 5db

* Noise figure: about 4db

* Seclusion: > 70db

* Power supply: ac110~220v, 45~55Hz

* Compact design: indoor use

NOTE:

* It is for one room use, or you can buy splitter and extra ceiling antennas for more rooms using.

* Make sure there is good signal ourside or on the roof to gain signal from signal tower.

* Please check the installing diagram and install it correctly.

1. Repeater functions

1- 1. Multi- mode signal repeater

1- 2. Specific signal repeater

1- 3. Priority signal repeater

1- 4. Convention and trunked mode switch

1- 5. Cross- frequency communication

1- 6. Radio roaming

1- 7. Remote switch single repeater and multi- repeater working mode switch

1- 8. Other network system connection

1- 8- 1. Support two- way communication with pstn, gsm, voip

1- 8- 2. Leave message when channel is busy

1- 9. Communication monitor

1- 9- 1. Voice recording

1- 9- 2. Message back- up

1- 9- 3. Live monitoring

1- 9- 4. Interrupt any communication with the highest priority

1- 9- 5. Function to stop radio transmission by force

1- 9- 6. Check radio signals in range

1- 9- 7. Radio gps location tracking

1- 9- 8. Signal coverage range monitoring

1- 10. Remote control

1- 10- 1. Automatically report the working status to a console periodically

1- 10- 2. Remote control repeater with a console

Company information
Company name: comart co ltd
Email: sales@comart.Com.Cn
Website: http://www.Comart.Com.Cn/index_en.Asp

FC adapter metal housing and either a precision zirconia or a rugged phosphor bronze sleeves.
Zirconia sleeve enables stable connection and thus enhances performance, and is ideal for single mode applications. Phosphor bronze sleeve provides durability, and is ideal for multimode applications. Square flange mount and "D" hole mount styles are available.

Features :
Low insertion loss
Good exchangeability and repeatability
Zirconia or phosphor-bronze sleeve
Simplex or duplex
Flange mount style

Applications:
Telecommunication
Computer networks
CATV networks
Active device termination
Instrumentation

Export standard packaging

We are a large-scaled manufacturer specializing in financial and packaging equipment. Our sophisticated products are banknote binding machines, coin sorter machines, currency counter machines and other binding machines


Features of ZK-400BL
a), Strap 10 packets banknote into 1 bundle with plastic belt automatically
b), Optional strapping mode (Single band / Double bands/ Tri-bands)
c), LCD screen displays detailed operation process
d), Self-test malfunction, LCD screen display failure
e), Adjust pressing pressure automatically, controlled by CPU
f), Pre-press function ensure strapping old banknote bundle successfully
g), External belt boxes make belt fix easier
h), Adjust heating temperature automatically
i), Safe operation, adopt Movable Protecting Shutter design
j), Move flexible with floor wheel
k), Low noise, no smog and smell
l), Low cost strapping belt
m), One year warranty

F mp3 songs to portable usb and sd mass storage devices such as mp3 players and usb flash drives
Mobile trolley design - wheels, retractable tow handle and side handle horizontal
Weatherproof, rugged abs housing
Suitable for stand mounting
Stackable series
Connections: 1 x usb, 1 x sd input, 2 x 6.3 mm jack, microphone input, 1 x rca stereo line input, 1 x 12v terminal connection
Playable formats: mp3, wma
Frequency wireless microphones: 174-270mhz
Mp3-control section, with a backlit lcd display and repeat function
2-band equalizer - bass and treble adjustable
Adjustable echo effect
Mic section with removable telescopic antennas, separately adjustable microphone volume, master volume and microphone operation leds
Adjustable master volume
On and off switch on the microphone
Microphone priority function
Sensitivity: 97db
Frequency response: 40hz to 20khz
Mute
Microphone power supply: 9v battery
Power box: 230v, 50hz
34 x 58 x 31cm (w x h x d)
Weight: 13.6 g


Standard packing

63e1 sdh/mstp multiplexer
Brief introduction
Idm mstp155-63 is wide narrow-band integrated optical fiber transmission equipment base on sdh/mstp technology, it can directly connected to the remote pdh multiplexer, optical modem and multi-service optical terminal and so on, integration of sdh transmission unit, e1 crossing unit and integrated service accessing unit, to adapt to various network topology can be set as a multi-service access, sdh transmission, pdh optical access functions of the small mstp equipment. Powerful network management functions, it can configure, failure and data statistics, real-time monitoring of network performance.
Features
1.Two stm-1 optical interface, provide 1 +1 channel protection.
2.Provide 2mm connector, up to support 63 e1.
3.2-channel n íß 64k (n = 0 ~ 31) of the v.35/v.11 channel.
4.Provide e1, ethernet, v.35 and voice service optional.
5.Provide 4-channel ethernet physical isolation, to achieve n íß 2.048mbps bandwidth.
6.Support point-to-point, chain-shaped and ring network.
7.Comply with the itu-t g.813 standards and fully meet the timing accuracy.
8.Powerful network management features, online real-time monitoring.
9.Standard 19-inch 1u chassis structure, easy to install.

Specifications
Optical interface
Rate: 155mbpsía4.6ppm
Fiber mode: single/multi-mode
Consumption: -15 ~ -8dbm
Wavelength: 1310nm/1550nm
Physical connector: fc/sc
Sensitivity: better than -32dbm

Laser+QR Code+Reflector
Hybrid Navigation

Collaborative Robots in Automotive Manufacturing
12kg
Collaborative Robots Payload(kg)

Collaborative Robots in Manufacturing
1150mm
Operation Radius

Collaborative Robots Industry 4.0
±1mm
Positioning Repeatability

Cooperative Robots
2/ 8
Runtime (H)

Industrial Collaborative Robots
0.5
Machine Vibration(g)

MORA: MORA Collaborative fast pick and place robot, collaborative industrial robots, computer integrated automated manufacturing software, Computer Automated Manufacturing Electronics Robots.
Basic Chassis length 650mm Battery Lithium-ion 48v 70Ah Safety Standard dual lasers; front/rear 3D cameras;
Parameters Chassis width 1000mm Charge time 2H System bumper; lasers for vertical protection;
Bidirectional Runtime 8H single-point laser (optional);
Self weight 300kg hole detection; sound and light alarm.
Performance Manipulator rated load 12kg Customized Noise 75db Max. slope 5%
Machine vibration 0.5g Ground fatness 10mm/m2 Ground clearance 35mm
Height above ground 25mm Still tolerance 10mm
Repeatability ±1mm
Communication IEEE 802.11 a/g/b/n/ac/ax 2.4/5GHz, 5G optional

Mora Robot Main Function
Obstacle Detect and Auto Stop Intelligent Obstacle Avoidance
Easy Integration With Third Party Facilities
Auto Positioning and Navigation Intelligent Route Planning
Man/Machine/Fleet Cooperation
Dual Way Movement (Forward/Backward) Optional
Wafer Box/Tray Cnc Machining Flexible Turnover
Auto Charging

Mora Robot Order Picking System Advantages
Accuracy
onfiguring with vision system, docking accuracy ±10mm, picking accuracy ±1mm

Flexible
Intelligent autonomous navigation, 30 meters laser detection distance, agile obstacle avoidance, suitable for mixed man-machine operation.

Safety
Anti-static design, anti-collision bumper, no need safety fence.

Easy to Use
Graphical programming. Easy to operate and connect by Mobile phone and PAD wirelessly.

Quick Integration
Modular system for fast integration of various applications.

We can provide kinds of warehouse picker robots for sale, and the price of autonomous mobile robots in warehouse is reasonable, if you want to buy robot that picks up things , please contact us.

Now the amr robot cost is reasonable, if you have needs, please leave us a message.