Main Components: Special modified block silicone compound Appearance: light yellow translucent viscous fluid Ionicity: weak cationic PH value: 5-8 (30% water solution) Solubility: can be dissolved in water at any ratio. Property & Characteristics Impart super soft,smooth and fluffy hand feeling for polyester, cotton and blended fabrics. Good alikali-resisting, salt-resisting and hard water-resisting. Excellent cost performance. Application: Be suitable for polyester, cotton and blended fabrics, also can be for soft finishing of yarn, sweater, socks and other fabrics. Can be used for dyeing mills and washing plants.
Brief information -- A quaternary modified softening agent with terpolymer structure and excellent hydrophilicity. -- HTcone 3206 E is very stable in acid and mild alkali condition at normal temperature while it also has excellent stability at 100degree below pH 8,which is suitable for dyeing machine and setting machine . -- Confers soft, silky and bulky hand feels to fabrics, as well as hydrophilicity while absorbency is 2 â?? 3 seconds. General properties -- Appearance: pale transparent liquid -- pH: 5 â?? 8 (1% solution at 20 degree) -- Ionicity: nonionic -- Solubility: easily soluble in water --Solid content : 53% Properties and fields of application -- Resistant to high temperature, mild alkali at normal temperature, strong electrolytes and shearing stable wihout silicone spots. -- Natural soft, smooth and non-greasy hand feels. -- Excellent hydrophilicity that exactly solves the conflict of hand feels, hydrophilicity and washing resistance. -- Suitable for various process and euqipments with high flexibility. -- Suitable for various fibres, such cotton, T/C, CVC, etc, especially best performance to cotton. -- Excellent hydrophilicity that allows direct shade repair and avoids re-pollution during the rapair. -- Better cost performance compared with softener flakes at same price, which achives performance combined softener flakes and hydrophilic silicone softeners. Application -- High concentration product and can be diluted 5-10 times. -- Padding: HT-3206E: 20 â?? 50 g/L Cure at 100degree and set at 150 â?? 180degree for 50 seconds -- Dipping: Ht-3206E: 2 â?? 5% (O.W.F) Temperature & time: 25 â?? 50degree �? 20 â?? 30 min -- Specific process should be adjusted by testing. Packing and storage -- Packing: 125 kg/polyethylene drum -- Storage: 6 months in sealed container at room temperature
Basic Characteristics Appearance: slightly yellow to colorless viscous liquid Ionicity: Cationic PH value: 4.5-6.5 Solubility: dissolved in water at any ratio Active content: 42 �± 1% Hand feeling: instantly hydrophilic, comprehensive feel better Features And Advantages Hand feeling: instantly hydrophilic, comprehensive feel better 1, This product is a cationized amino and polyether-modified multi-copolymer block silicone oil emulsion, especially suitable for processing all kinds of chemical fiber, cotton, wool, and blended fabric, does not affect the fabric itself hydrophilic; no yellowing, suitable for bleaching or light-colored fabric; 2, Itis particularly suitable for processing cotton and polyester-cotton fabric, can achieve the instantaneous hydrophilic effect, but also has a certain soft, smooth hand feel; 3, It can be used as an antistatic agent for chemical fiber fabric; cationic strong, it with anion may occur coagulation, please make a trial or test a sample before application, or add our company's specialty products anion and cation anti-coagulation, agent;. 4, Suitable for continuous processing of the process, will not bring sticky roll; also suitable for padding method, high suction rate; without APEO. Usage Method 5, This product is 50% solid content of high concentration emulsion, can be used directly, or better using after thinning, the recommended use ratio can be diluted 1: 2.5 (20% solids) or 1: 5 (10% solids), do not need to adjust the pH value, the appearance of colorless transparent liquid; 6, After thinning, you can use the exhausting method and continuous padding method, Exhausting method: the dosage (20% solids) 0.6-2% (owf), temperature 30-40 â??, 15-30min, bath ratio 1: 20-40; Padding method: the dosage (20% solids) 6-20g / l, 120 â?? pre-bake, 150-180â??stereotypes baking; Packaging and storage 50kg or 120kg of plastic drums. Should be stored in a cool ventilated warehouse, to prevent exposure, the storage period for half a year.
Silicone Softener is a reactive cationic silicone softner designed for use on cotton, synthetics and blends, wovens, non-wovens, knits and flocked goods, apparel, sheeting and upholstery fabrics. It is non-yellowing and is compatible with other typical resin finishing bath components, including durable press resins, organic softeners, etc. The product imparts a silky, slick hand to treated fabrics. APPLICATION Polyester finishing - For disperse / cationic dyed polyester fabric /yarn / fiber, dosage is 2 to 15 gpl or 0.2% to 1.5% at 70% expression. It gives bouncy, soft and smooth result with good fall to polyester varieties. PC / PV fabric - Combination of other finishing agents + VELVETROL 5 to 10 gpl or 0.5% to 1.0% at 70% expression will give good slippery feel with bounce. Shirting - Combination of cationic softener (Lush feel/local ) + VELVETROL 6 to 10 gpl Velvet fabric - 2 gpl to 10 gpl
Main Components: Special modified block silicone compound Appearance: light yellow translucent viscous fluid Ionicity: weak cationic PH value: 5-8 (30% water solution) Solubility: can be dissolved in water at any ratio. Property & Characteristics Impart super soft, smooth and fluffy hand feeling for polyester, cotton and blended fabrics. Good alikali-resisting, salt-resisting and hard water-resisting. Excellent cost performance. Application: Be suitable for polyester, cotton and blended fabrics, also can be for soft finishing of yarn, sweater, socks and other fabrics. Can be used for dyeing mills and washing plants.
Amino silicone softener
Basic Characteristics Appearance: slightly yellow to colorless viscous liquid Ionicity: Cationic PH value: 4.5-6.5 Solubility: can be can be dissolved in water at any ratio Active content: 42 1% Hand feeling: instantly hydrophilic, comprehensive feel better Features And Advantages Hand feeling: instantly hydrophilic, comprehensive feel better This product is cationized amino and polyether modified multi-copolymer block silicone oil emulsion, especially suitable for processing all kinds of chemical fiber, cotton, wool and blended fabric, does not affect the fabric itself hydrophilic; no yellowing, suitable for b leaching or light-colored fabric; Itis particularly suitable for processing cotton and polyester-cotton fabric, can achieve instantaneous hydrophilic effect, but also has a certain soft, smooth hand feel; It can be used as antistatic agent for chemical fiber fabric; cationic strong, it with anion may occur coagulation, please make a trial or test a sample before application, or add our company's specialty products anion and cation anti-coagulation agent;. Suitable for continuous processing of the process, will not bring sticky roll; also suitable for padding method, high suction rate; without APEO. Usage Method This product is 50% solid content of high concentration emulsion, can be used directly, or better using after thinning, the recommended use ratio can be diluted 1: 2.5 (20% solids) or 1 : 5 (10% solids) , do not need to adjust the pH value, the appearance of colorless transparent liquid; After thinning, you can use exhausting method and continuous padding method, Exhausting method: the dosage (20% solids) 0.6-2% (owf), temperature 30-40 , 15-30min, bath ratio 1: 20-40; Padding method: the dosage (20% solids) 6-20g / l, 120 pre-bake, 150-180 stereotypes baking; Packaging and storage 50kg or 200kg plastic drums. Should be stored in a cool ventilated warehouse, to prevent exposure, storage period for half a year.
Basic Characteristics Appearance: slightly yellow viscous liquid Ionicity: Cationic pH value: 6--8 Solubility: self-emulsifying, can be can be dissolved in water at any ratio Active content: 85 1% Hand feeling: instantly hydrophilic, comprehensive feel better Features And Advantage This product is cationized amino and polyether modified multi-copolymer block silicone oil, especially suitable for processing all kinds of chemical fiber, cotton, wool and blended fabric, does not affect the fabric itself hydrophilic; no yellowing, suitable for bleaching or light-colored fabric; It is particularly suitable for processing cotton and polyester-cotton fabric, can achieve instantaneous hydrophilic effect, but also has a certain soft, smooth hand feel; It can be used as antistatic agent for chemical fiber fabric; cationic strong, it with anion may occur coagulation, please make a trial or test a sample before application, or add our company's specialty products anion and cation anti-coagulation agent;. Suitable for continuous processing of the process, will not bring sticky roll; also suitable for padding method, high suction rate; without APEO. Usage first adding isomer alcoholether 1306 emulsifier, then add cotton MBS 9908 (recommended 9908: emulsifier = 4-6: 1), mix well and then add 1-1.5% glacial acetic acid; then slowly add water to the desired concentration., the recommended use ratio can be diluted 1: 5 (20% solids) or 1 : 10 (10% solids) , the appearance of colorless transparent liquid; After thinning, you can use exhausting method and continuous padding method, Exhausting method: the dosage (20% solids) 0.6-2% (owf), temperature 30-40 , 15-30min,bath ratio 1: 20-40; Padding method: the dosage (20% solids) 6-20g / l, 120 pre-bake, 150-180stereotypes baking; Packaging and storage 50kg or 200kg plastic drums. Should be stored in a cool ventilated warehouse, to prevent exposure, storage period for one year.
Physical and chemical property: Appearance: Colorless to yellow Liquid Ionic properties: Polysiloxane compound, cation Active content: 21% Applicationdurable, hydrophilic, stable with super soft and fluffy hand feel, especially suitable for chemical fiber. Product characteristics: Super soft, fluffy, durable, hydrophilic and stable, suitable for fibers 200 high temperature resistance Excellent shear stability and process safety Strong anion resistance, pH scope 1-12 Especially suitable for absorption process Product Application: Impregnating process: dilute by cold water or warm water under 30, add to finishing bath, adjust the bath pH to 4.5-5.5 by using monoamino-acid(acetic acid, do not use Formic-acid). 1-3% LC (O.W.F) pH 5.0-5.5(adjusted by acetic acid) Temperature 40C Time 20min Drying Under normal conditions< 180 C Padding process: 10-30 g/l LC mangle expression 60-80% Drying Under normal conditions< 180 C Package and Storage 200kgs per plastic drum, The product is sensitive to cold and high temperaturesdo not store below 0or above 40.Otherwise unrecoverable qualitative changes may occur. If the storage temperature is too high or too low, it should be tested before use.
Physical and chemical property: Appearance: Colorless to yellow Liquid Ionic properties: Polysiloxane compound, cation Active content: 21% Applicationdurable, hydrophilic, stable with super soft and fluffy hand feel, especially suitable for chemical fiber. Product characteristics: Super soft, fluffy, durable, hydrophilic and stable, suitable for fibers 200 high temperature resistance Excellent shear stability and process safety Strong anion resistance, pH scope 1-12 Especially suitable for absorption process Product Application: Impregnating process: dilute by cold water or warm water under 30, add to finishing bath, adjust the bath pH to 4.5-5.5 by using monoamino-acid(acetic acid, do not use Formic-acid). 1-3% LC (O.W.F) pH 5.0-5.5(adjusted by acetic acid) Temperature 40 C Time 20min Drying Under normal conditions< 180 C Padding process: 10-30 g/l LC mangle expression 60-80% Drying Under normal conditions< 180 C Package and Storage 200kgs per plastic drum, The product is sensitive to cold and high temperaturesdo not store below 0or above 40.Otherwise unrecoverable qualitative changes may occur. If the storage temperature is too high or too low, it should be tested before use.
Silicone sofener for durable soft finish.
Silicone sofener for durable soft dry handle to cotton.
Premium silicone softener for cotton
Premium soft handle to cotton, synthetics and their blends. Ideal durable softener for polyester fabrics. APEO / NPEO free.
Premium softness. Suitable for cotton, synthetics and their blends, both woven and knits. Durable. Easy to dilute. Economical.
Premium softness. Suitable for cotton, synthetics and their blends, both woven and knits. Durable. Easy to dilute. Economical.
Premium durable silky soft handle to cotton, synthetics and their blends. Offers very luxuriant handle and limpness to fabrics. APEO / NPEO free.
Durable elastomeric handle to cotton and its blends. Excellent bouncy softness to treated fabrics. APEO / NPEO free.
Silicone softener for very good surface smoothness. Ideal for drum washing.Durable silky soft handle to cotton and its blends.
Introduction : RX-12558 was multifunction organic-silicone fluid softener. It imparts durable, wash resistant to fibers, textures and leathers. Traditional softeners (e.g. amino-functional silicones) generally cause the fabric to become extremely hydrophobic. But RX-12558 is designed to provide hydrophilic & softening to all kind of textures, leathers and hairs. Especially, RX-1288 may be applied by exhaustion methods for treating various fabrics without side reaction. Specifications : appearance clear to opaque special gravity 1.02 active content 80.%
