Our company mainly dealing with silicon steel(crgo & crngo) biz including full wide coil, baby coil, slitting coil, sheet, triangles, oily core, interleave coil, mgo, squeezed coil...Etc. We can offer you these grades: Crgo: 0.35mm---35pg155 0.30mm---30ph105, 30pg130/120, m140-30s, m130-30s 0.27mm---27ph100, 27phd090, 27pg130, 27q120, m130-27s 0.23mm---23ph095, 23phd085, b23g110 Crngo: 0.35mm---35cs440, 35cs300, 35cs250, 35a270, 35a230, 35a210 0.50mm---50a1300, 50a1000, 50a800, 50a600, 50a470, 50a250 Most are from posco, baosteel, nsc, jfe, csc.
Smooth surface, high accurate overstowing, without oxidation film Export standard package.
We are supplier and exporter of Ferro Silicon. Ferro silicon Specs: Si:75%min. and Si:72%min. C:0.2%max. S:0.02%max. P:0.04%max. Al:2.0%max.1.5%max.and 1.0%max .Commodity: Ferro Silicon Low Al Specs: Si:75%min. C:0.2%max. S:0.02%max. P:0.04%max.Al:0.1%max.0.3%max.and0.5%max. In 1mt plastic woven bags. Ferro Silicon Ferro Silicon has a melting point of 1200�¯�¿�½?�?�°C to 1250�¯�¿�½?�?�°C with a boiling point of 2355�¯�¿�½?�?�°C and Ferro Silicon contains about 2% of calcium and alluminium. Ferro Silicon, as an additive to the production process of ferrous metals, will impart several desirable properties upon the resultant alloy. Some of the primary benefits of adding Ferro Silicon to an alloy is to improve the corrosion resistant properties of the new compound, as well as to add to the high temperature heat- resistance properties of the new alloy, for example, in the production of silicon steel for use in transformer cores.
Bao steel / Ma steel / and other mill customer requested B50A470-A
Specifications Non-oriented Silicon Steel: 1) Thickness: 0.35mm, 0.50mm, 0.65mm 2) Width: 40-1290mm 3) Inner Diameter: 508mm 4) Coating: Insulation coating of T2, T4, HW, C5 and C6 5) Standard: GB/T2521-1996 SMC Products are packed and labeled according to the regulations and customer's requests. Great care is taken to avoid any damage which might be caused during storage or transportation. In addition, clear labels are tagged on the outside of the packages for easy identification of the product I. D. and quality information. 1)SMC Standard 2)Customization
We are exporter of Ferro Silicon. FerroChrome is a kind of Ferro alloy which is formed by Ferro and Chrome,it is an important alloy addition in steel making. Ferrochrome (Fe Cr) is an alloy of chromium and containing between 50% and 70% chromium.
Ferrosilicon is often used as a deoxidizer in steelmaking because silicon combines easily with oxygen to form silicon dioxide. Furthermore, the formation of silica releases a large amount of heat, which also helps to raise the temperature of the steel. Ferrosilicon is an alloy of iron and silicon (average content is 15% to 90%). It is a key ferroalloy used for deoxidation and alloying of steel. Silicon increases the hardness, tensile strength, elasticity and flow limits of steel, improves oxidation resistance and reduces energy losses. In steel making: Used as Deoxidizers and alloying agents In ferro alloy production: Used as reducing agent In Foundry: Used as Inoculants and spheroidizing agents Size:0-1mm, 1-3mm, 3-10mm,10-60mm, 10-100mm, lump, or customized Packing: 1MT big bag or customized
Ferrosilicon is often used as a deoxidizer in steelmaking because silicon combines easily with oxygen to form silicon dioxide. Furthermore, the formation of silica releases a large amount of heat, which also helps to raise the temperature of the steel. Ferrosilicon is an alloy of iron and silicon (average content is 15% to 90%). It is a key ferroalloy used for deoxidation and alloying of steel. Silicon increases the hardness, tensile strength, elasticity and flow limits of steel, improves oxidation resistance and reduces energy losses. In steel making: Used as Deoxidizers and alloying agents In ferro alloy production: Used as reducing agent In Foundry: Used as Inoculants and spheroidizing agents Size:0-1mm, 1-3mm, 3-10mm,10-60mm, 10-100mm, lump, or customized Packing: 1MT big bag or customized
Silicon steel 1.0 scope 1.1 this specification covers the grain oriented electrical steels are iron-silicon alloys that provide Low core loss and high permeability needed for more efficient and economical electrical Transformers. Cold rolled grain oriented (crgo) grades of electrical steel are typically used For transformer cores and large generators. 2.0application 2.1 the cgro is used regularly for cores in transformers. 3.0standard 3.1 this specification is prepared by taking guidance from bs 601:1973 4.0material 4.1 cold rolled grain oriented (crgo) grade m5, moh, zdkh as per bs 601:1973 and Equivalent to jis c 2553 5.0properties 5.1 specifications and typical electrical and magnetic properties (see appendix 1) 6.0dimension and tolerance 6.1 dimension : as per the purchase order with the tolerance as given table below Tolerance on width Nominal width (mm) Overup to and includingtolerance (mm) 0150+ 0 0.3 150500+ 0 0.5 001000+ 0 1.5 Tolerance on length Nominal width (mm) Overup to and includingtolerance (mm) 02000- 0 + 1.5 2000>2000- 0 + 2.0 Tolerance on length The tolerance on the mean thickness, measured by contact micrometer, for any coil shall be 0.03 mm from the nominal thickness. Tolerance on edge burr The tolerance on edge burr not to exceed 0.05mm. Tolerance on edge camber Edge camber is the lateral departure of the edge of the strip from a straight line forming a chord, refer figure a: Tolerance on edge camber of strip in coil shall not exceed 2 m in 2000 mm and shall be measured against a straight edge using a 2000 mm length cut from a coil. 7.0references (1) bs 601: 1973, steel sheet and strip magnetic circuits of electrical apparatus.
Silicon Metal 441 (Powder)
Ferro Silicon (FeSi)
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
Silicon metal #3303 Si:99.0%min. Fe:0.3%max. Al:0.3%max. Ca:0.03%max. Size:10-100mm,90%min. In plastic woven bags of 1 mt each. Ferro silicon, ferro silicon powder, ferro silicon briquette.
For dividing silicon steel to sheets. Suitable hardness sharp edge, which makes the divided sheets smooth and free of burrs. Life time is over 50 times longer than that of skd11.
Size:28x24.5x4cm Weight:315g Color:pantone code 28x24.5x4
Product Name silicon steel stamping rotor Material cold rolled non-oriented silicon steel Supplier WISCO, BAO STEEL ,SHOUGANG GROUP,TISCO Process Heat treatment, Annealing and Turning Surface Standard DIN GB ISO JIS Range Φ 100mm -- Φ 590mm Stacked length Max 1100mm Service OEM&ODM Packing PP + Solid Sea-worthy Carton with special process of antirust Delivery Time 10 Days if existing compound tools are available/50 Days if we need to making tools
Product Name motor silicon steel lamination Material cold rolled non-oriented silicon steel Supplier WISCO, BAO STEEL ,SHOUGANG GROUP,TISCO Process Heat treatment, Annealing and Turning Surface Standard DIN GB ISO JIS Range Φ 100mm -- Φ 590mm Stacked length Max 1100mm Service OEM&ODM Packing PP + Solid Sea-worthy Carton with special process of antirust Delivery Time 10 Days if existing compound tools are available/50 Days if we need to making tools
Product Name motor silicon steel lamination Material cold rolled non-oriented silicon steel Supplier WISCO, BAO STEEL ,SHOUGANG GROUP,TISCO Process Heat treatment, Annealing and Turning Surface Standard DIN GB ISO JIS Range Φ 100mm -- Φ 590mm Stacked length Max 1100mm Service OEM&ODM Packing PP + Solid Sea-worthy Carton with special process of antirust Delivery Time 10 Days if existing compound tools are available/50 Days if we need to making tools
Quick Details Type: CRNGO(non-grain) / CRGO(grain) Technique: Cold Rolled Dimensions: EI-28 to EI-360 Thickness: 0.27 0.3 0.35 0.5mm Surface Treatment: Coated Shape: EI Lamination, UI Lamination Standard: GB, AISI, ASTM, GB, Other Place of Origin: Jiangsu, China (Mainland) Model Number: CS-EI Grade: 800,600,470 440,300,250 etc. product name: Silicon steel lamination for transformer ballast machine etc key words: silicon steel sheet iron core Surface treatment: Coated Packing: Rohs Application: transformer core Material: cold rolled non-oriented silicon steel Chemical Composition: Silicon Steel
