Silicon Carbide Abrasives Suppliers and Manufacturers

Silicon carbide for advanced refractory material The main application in the refractory industry is more, of course, other industries can also be applied. Silicon carbide has high fire resistance and chemical stability, Therefore, it is widely used in all kinds of refractory materials, but there is no complete method of chemical analysis of silicon carbide refractories. Analysis of the project of SiC Refractory general: free carbon, silicon dioxide, silicon carbide, silicon, alumina and ferric oxide free three. The utility model is mainly used in the refractory industry, the deoxidizing agent in the steel making industry, the gun mud, the casting material and the iron channel material. The content distribution of this product is: 98% 97% 95% 90% The material has good wear resistance, thermal shock stability, volume stability and strength, thermal conductivity is also very good. In addition, the material also has Good performance, such as simple site preparation, rapid growth of strength, easy to follow-up construction and bonding with metal components, such as solid. Cyclic vulcanization The lining of the combustion chamber of the boiler and the inlet of high temperature separation. 1-3, 1-0.2180-0,0.2-0,0-1 refractory with silicon carbide as the main component. Density 3.1/cm3. Thermal expansion coefficient 3.7 thermal conductivity 0.6 using hot pressing sintering method. Can be used for all kinds of smelting furnace lining, high-temperature furnace components, silicon carbide plate, plate, support, sagger, carbide Silicon crucible. Heavy refractory material made of SiC95% as the main raw material of the crystallization of refractory materials. Due to the high purity of raw materials, low melting impurities The high temperature performance of the product is much better than that of the clay binding product, but the high temperature performance of the product is also affected by the forming pressure and the like Art influence.

Black Silicon Carbide for abrasive 1. Introduction Black Silicon Carbide is produced from quartz sand and high quality anthracite/petroleum coke under high temperature in and electric resistance furnace. It looks black and has a microhardness of 2800-3300kg/mm2. Abrasive tools made of it, are fit to grind metals and non-metals materials of low tensile strength, for example, grey cast iron, brass, alumina, stone, leather and hard rubber etc. It can also be used for refractory purpose or in electronic industry. 2. Chemical composition F8-F360 SiC: 99%min; F. C: 0.2%max; Fe2O3: 0.2%max F400-F600: SiC: 98.5%min; F. C: 0.4%max; Fe2O3: 0.4%max F800-F1200 SiC: 97.5%min; F. C: 0.6%max; Fe2O3: 0.6%max. 3. Application It is widely used in the fields of abrasive(sandcloth, sandpaper, gringding wheel), blasting, grinding, refractory and engineering ceramics industries. Also, it can be processed to micro powder, and used in the field of electronics, spaceflight and advanced internet industry. 4. About us Henan Sicheng Co., Ltd, founded in 1999, is specialized in White Fused Alumina, Brown Fused Alumina, Mullite and other related products. Our production runs under the certifications of GB, ISO, FEPA, and JIS. We offer various items de pending on the demands of our customers. Currently, we have exported our products all over the world, such as Europe, the USA, India, and Japan, enjoying good reputation in machinery, metallurgy, light industry and other fields. FEPA standard 25kg PVC Bags + 1mt Big Bag.

Green silicon carbide powder abrasives polishing Green Silicon Carbide is made of petroleum coke and high quality silica as the main raw material, salt as the additive and smelted in the resistance furnace at high temperature.Green crystal, crisp and sharp, and has a certain thermal and electrical conductivity.The micro structure is hexagonal crystal. Abrasives models: Grain: 16#, 20#, 22#, 24#, 30#, 36#, 40#, 46#, 54#, 60#, 70#, 80#, 90#, 100#, 120#, 150#, 180#, 220#, 240# Micro powder: (FEPA) F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500 (JIS)240#, 280#, 320#, 360#, 400#, 500#, 600#, 4700#, 800#, 1000#, 1200#, 1500#, 2000#, 2500#, 3000#, 4000#, 6000#, 8000#, 10000# purpose: 1. it are suitable for grinding high-speed,high carbon steel 2.high-grade refractory materials 3.abrasives tool 4.grinding and polishing 5.ceramics 6.sandblasting Chemical analysis: SIC(min) 99.05% SiO2(max) 0.2% F.Si(max) 0.03% F.C(max) 0.04% Fe2O3(max) 0.1% Physical characteristics: color green Nup hardness 2600 Mohs Hardness â?¥9.4 Melting point 2600â?? Specific gravity 3.2g/cm3

Description: Black Silicon Carbide is produced at a high temperature in an electrical resistance arc furnace with quartz and petroleum coke as it primary raw materials. The final product is sharp and friable with outstanding electrical and thermal conductivity properties. Our Black Silicon Carbide grains are produced using various techniques to optimize shape, surface area, and density. Application: Our Black Silicon Carbide is used for pressure blasting, lapping, bonded and coated application, refractory material, and precision ceramic. Typical Chemistry: Silicon Carbide(SiC) 97.95% Silicon(Si) 0.48% Silicon Dioxide(SiO2) 0.55% Carbon(C) 0.29% Iron(Fe) 0.9% Aluminum(Al) 0.10% Other 0.54% Physical Characteristics: Crystal Form: Hexagonal(Alpha SiC) True Density: 3.21g/cm3 Melting Point: Dissociates at-2500 C Hardness: Knoop(100)-2500; Mohs 9.0+ Color: Black Test Methods: Sizing:FEPA F Standard FEPA P Standard Customer Specific Standards Grains Size: 0-1,1-3,3-5,5-8,8-12mm Macro Grits FEPA F and P 4-220 Micro Grits FEPA F and P 230-2000 Customer Specific Sizes Packing: 1)25Kgs woven bag,40bags on pallet 2)25Kgs woven bag,40bags in big bag 3)25Kgs paper bag,40bags on pallet 4)1000Kgs in big bag Customer Specific Packing

Silicon carbide abrasive.

Silicon carbide abrasive powder jis 800 green, high purity, semiconductor ingot slicing grade, slurry grade.

1, Main silicon carbide abrasive, stability of high hardness, toughness determined by sic grinding tool can be used in the manufacture of consolidation, coated abrasive free grinding glass, ceramics, stone, cast iron and some non-ferrous metals, hard alloy, titanium alloy, high speed steel cutter grinding wheel, etc. 2, Refractory corrosion resistant material - main silicon carbide with high melting point (temperature), chemical inert reting resistance silicon carbide can be used for abrasive, ceramic products by burning kiln with shed board saggar, zinc smelting industry vertical cylinder distillation furnace with carbon silica brick, aluminum electrolytic cell line, crucible, such as a furnace material of silicon carbide ceramic products. 3, Chemical use, silicon carbide steel melt steel hydrolysis and free oxygen, metal oxide reaction of carbon containing silicon oxide slag for smelting steel cleaning agent is used for steelmaking deoxidizer cast iron tissue conditioner, generally with using low purity of silicon carbide to reduce the raw material for manufacturing silicon tetrachloride. 4, Electrical use, used for high temperature heating element, nonlinear resistance element semiconductor material silicon carbide heating element used in the 1100 ~ 1500 (furnace) nonlinear resistance element all kinds of lightning protection valve plates. 5, The far-infrared radiation coating or silicon carbide silicon dryer with far infrared radiation. New silicon carbide products is widely used in a particular industry, air conditioning, automotive engine, communications equipment, radar stations, the missile defense system, the space shuttle, and are used on aircraft carrier, especially in the aspect of space, some special parts, silicon carbide products to be reckoned with, and the effect of foreign resources, has the advantages of domestic, therefore, the development of an opportunity is also relatively well.

14#, 20#, 22#, 24#, 30#, 36#, 40#, 46#, 54#, 16#, 60#, 70#, 80#, 90#, 100#, 120#, 150#, 180#, 220#, 240#, 280#, 300#, 320#. We sell the most is 40#, 46#, 60#. Of course each has its uses! Brown fused alumina is called industrial teeth: mainly used in refractory materials, grinding wheels, sand blasting. 1 sandblasting brown corundum - sandblasting abrasive hardness moderate, high bulk density, no free silica, more than major, good toughness, is the ideal "Sand blasting material", which is widely used in the fields of aluminum profiles, copper profiles, washed jeans and precision molds; 2 free grinding - grinding grade abrasive, applied to the tube, optical glass, monocrystalline silicon, glasses, watches and clocks, glass, crystal glass, jade In the field of free grinding, is widely used in domestic advanced abrasive materials; 3 resin abrasive - abrasive with the right color, good hardness, toughness, suitable for the type of particle cross-section and blade retention, applied to resin Abrasives. 4 - coated abrasives abrasive abrasive paper, gauze production factory production of raw materials; 5 brown corundum functional filler - mainly used in automobile brake parts, special tires, special building products, such as can be used as the construction of highway pavement Runway, terminal, parking lot, industrial flooring, sports venues and other wear-resistant materials; 6 filter medium - is a new application of abrasive, abrasive particles used as the bottom of the filter bed media, purification of drinking water or waste water, is the country The utility model relates to a novel water filtering material, which is especially suitable for non-ferrous metal processing and oil drilling mud weighting agent. ZIBO JINYU ABRASIVE CO., LTD needs a friend to contact us to discuss, to achieve a win-win situation!

Green Silicon Carbide� is widely used for Abrasive Tools and Sandblasting. Our Silicon Carbide is hard with good abrasive ability and is ideal for abrasive blasting and polishing. It is widely used in abrasive tools, grinding and polishing etc. It also has above 99% Al2O3 content, coarse particles, good self-sharpening and good abrasion resistance.

Black Silicon Carbide  is widely used as a blasting medium and abrasive. Our Silicon Carbide is hard, extremely resistant and able to withstand the strongest alkalis and acids. It is widely used in abrasive tools, grinding and polishing, refractory materials, high end ceramics etc. It also has above 99% Al2O3 content, coarse particles, good self-sharpening and good abrasion resistance.

We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.

Abrasives Material: brown fused alumina, 110g/sqm blue latex paper for car sanding and painting and furniture and wood. 2.Material: silicon carbide, 110g/sqm brown latex paper for car sanding and metal and marble and stone 100pcs per bale and 10bales per carton

Refractory Grade Silicon Carbide 98% SiC Have a large inventory, Be ready for shipment.