Silicon carbide for advanced refractory material
The main application in the refractory industry is more, of course, other industries can also be applied. Silicon carbide has high fire resistance and chemical stability,
Therefore, it is widely used in all kinds of refractory materials, but there is no complete method of chemical analysis of silicon carbide refractories.
Analysis of the project of SiC Refractory general: free carbon, silicon dioxide, silicon carbide, silicon, alumina and ferric oxide free three.
The utility model is mainly used in the refractory industry, the deoxidizing agent in the steel making industry, the gun mud, the casting material and the iron channel material. The content distribution of this product is: 98% 97%
95% 90%
The material has good wear resistance, thermal shock stability, volume stability and strength, thermal conductivity is also very good. In addition, the material also has
Good performance, such as simple site preparation, rapid growth of strength, easy to follow-up construction and bonding with metal components, such as solid. Cyclic vulcanization
The lining of the combustion chamber of the boiler and the inlet of high temperature separation.
1-3, 1-0.2180-0,0.2-0,0-1 refractory with silicon carbide as the main component. Density 3.1/cm3. Thermal expansion coefficient 3.7 thermal conductivity
0.6 using hot pressing sintering method. Can be used for all kinds of smelting furnace lining, high-temperature furnace components, silicon carbide plate, plate, support, sagger, carbide
Silicon crucible. Heavy refractory material made of SiC95% as the main raw material of the crystallization of refractory materials. Due to the high purity of raw materials, low melting impurities
The high temperature performance of the product is much better than that of the clay binding product, but the high temperature performance of the product is also affected by the forming pressure and the like
Art influence.
Black Silicon Carbide for abrasive 1. Introduction Black Silicon Carbide is produced from quartz sand and high quality anthracite/petroleum coke under high temperature in and electric resistance furnace. It looks black and has a microhardness of 2800-3300kg/mm2. Abrasive tools made of it, are fit to grind metals and non-metals materials of low tensile strength, for example, grey cast iron, brass, alumina, stone, leather and hard rubber etc. It can also be used for refractory purpose or in electronic industry. 2. Chemical composition F8-F360 SiC: 99%min; F. C: 0.2%max; Fe2O3: 0.2%max F400-F600: SiC: 98.5%min; F. C: 0.4%max; Fe2O3: 0.4%max F800-F1200 SiC: 97.5%min; F. C: 0.6%max; Fe2O3: 0.6%max. 3. Application It is widely used in the fields of abrasive(sandcloth, sandpaper, gringding wheel), blasting, grinding, refractory and engineering ceramics industries. Also, it can be processed to micro powder, and used in the field of electronics, spaceflight and advanced internet industry. 4. About us Henan Sicheng Co., Ltd, founded in 1999, is specialized in White Fused Alumina, Brown Fused Alumina, Mullite and other related products. Our production runs under the certifications of GB, ISO, FEPA, and JIS. We offer various items de pending on the demands of our customers. Currently, we have exported our products all over the world, such as Europe, the USA, India, and Japan, enjoying good reputation in machinery, metallurgy, light industry and other fields. FEPA standard 25kg PVC Bags + 1mt Big Bag.
Green silicon carbide powder abrasives polishing Green Silicon Carbide is made of petroleum coke and high quality silica as the main raw material, salt as the additive and smelted in the resistance furnace at high temperature.Green crystal, crisp and sharp, and has a certain thermal and electrical conductivity.The micro structure is hexagonal crystal. Abrasives models: Grain: 16#, 20#, 22#, 24#, 30#, 36#, 40#, 46#, 54#, 60#, 70#, 80#, 90#, 100#, 120#, 150#, 180#, 220#, 240# Micro powder: (FEPA) F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500 (JIS)240#, 280#, 320#, 360#, 400#, 500#, 600#, 4700#, 800#, 1000#, 1200#, 1500#, 2000#, 2500#, 3000#, 4000#, 6000#, 8000#, 10000# purpose: 1. it are suitable for grinding high-speed,high carbon steel 2.high-grade refractory materials 3.abrasives tool 4.grinding and polishing 5.ceramics 6.sandblasting Chemical analysis: SIC(min) 99.05% SiO2(max) 0.2% F.Si(max) 0.03% F.C(max) 0.04% Fe2O3(max) 0.1% Physical characteristics: color green Nup hardness 2600 Mohs Hardness â?¥9.4 Melting point 2600â?? Specific gravity 3.2g/cm3
Silicon carbide si made from hte mixture of pure silica sand and green petroleum coke in ultra high power acheson furnace. Electric current is passed through t h e conductor,bringing about a chemical reaction ni which the carbon ni the coke and silicon ni the sand combined ot form SIC and carbon monoxide gas. Silicon carbide si With annual capacity for 60,000 tons of silicon carbide, we can provide different grade of silicon carbide to meet different clients' requirements, such as 70% SIC, 80% SIC, 85% SIC, 90% SIC, 93% SIC and 98% SIC, etc.We also provide customized size for 90% SIC and 98% SIC, such as 200 mesh and 325 mesh Fe203 Al203 Free carbon 3,5%MAX Moisture Size(mm) Ha-SIC-01 90% min. 1.5% max. 15.% max. 35.% max. 0.5% max. 1-5/1-10 HQ-SIC-02 90% min. 1.5% max. 1.5% max. 3.5% max. 0.5% max. 0-10 HQ-SIC-03 88% min. 1.5% max. 1.5% max. 3.5% max. 0.5% max. 0-1/1-10 HQ-SIC-04 98% min. 0.6% max. 0.6% max. 0.2% max. 0.5% max. 0-1/1-3 HQ-SIC-05 70% min. 2% max. 1% max. 10% max. 0.5% max. 1-10
Supplier: Silicon carbide abrasive
Supplier: Silicon carbide abrasive powder jis 800 green, high purity, semiconductor ingot slicing grade, slurry grade
14#, 20#, 22#, 24#, 30#, 36#, 40#, 46#, 54#, 16#, 60#, 70#, 80#, 90#, 100#, 120#, 150#, 180#, 220#, 240#, 280#, 300#, 320#. We sell the most is 40#, 46#, 60#. Of course each has its uses! Brown fused alumina is called industrial teeth: mainly used in refractory materials, grinding wheels, sand blasting. 1 sandblasting brown corundum - sandblasting abrasive hardness moderate, high bulk density, no free silica, more than major, good toughness, is the ideal "Sand blasting material", which is widely used in the fields of aluminum profiles, copper profiles, washed jeans and precision molds; 2 free grinding - grinding grade abrasive, applied to the tube, optical glass, monocrystalline silicon, glasses, watches and clocks, glass, crystal glass, jade In the field of free grinding, is widely used in domestic advanced abrasive materials; 3 resin abrasive - abrasive with the right color, good hardness, toughness, suitable for the type of particle cross-section and blade retention, applied to resin Abrasives. 4 - coated abrasives abrasive abrasive paper, gauze production factory production of raw materials; 5 brown corundum functional filler - mainly used in automobile brake parts, special tires, special building products, such as can be used as the construction of highway pavement Runway, terminal, parking lot, industrial flooring, sports venues and other wear-resistant materials; 6 filter medium - is a new application of abrasive, abrasive particles used as the bottom of the filter bed media, purification of drinking water or waste water, is the country The utility model relates to a novel water filtering material, which is especially suitable for non-ferrous metal processing and oil drilling mud weighting agent. ZIBO JINYU ABRASIVE CO., LTD needs a friend to contact us to discuss, to achieve a win-win situation!
Green silicon carbide for abrasive 1. Introduction Green silicon carbide is produced basically in the same manner as black silicon carbide in a resistance type electric furnance with petroleum coke, quartz sand and other materials. The product has greater purity than black silicon carbide and higher hardness. 2. Chemical composition Green silicon carbide for abrasive F8-F360: SiC: 99%min; F. C: 0.2%max; Fe2O3: 0.2% F400-F600: SiC: 98.5%min; F. C: 0.4%max; Fe2O3: 0.4% F800-F1200: SiC: 97.5%min; F. C: 0.6%max; Fe2O3: 0.6%. 3. Application Green silicon carbide Green silicon carbide / abrasives is suitable for processing hard metal alloys and non-metallic materials that are hard and brittle such as jewels, optical glass or ceramics. It's sharp cutting characteristics also make it useful for soft materials such as copper, brass, aluminium, or magnesium. 4. About us Henan Sicheng Co., Ltd, founded in 1999, is specialized in White Fused Alumina, Brown Fused Alumina, Mullite and other related products. Our production runs under the certifications of GB, ISO, FEPA, and JIS. We offer various items de pending on the demands of our customers. Currently, we have exported our products all over the world, such as Europe, the USA, India, and Japan, enjoying good reputation in machinery, metallurgy, light industry and other fields. FEPA standard 25kg PVC Bags + 1mt Big Bag.
Refractory Grade Silicon Carbide 98% SiC Have a large inventory, Be ready for shipment.
Green silicon carbide Green silicon carbide is made of quartz sand, petroleum coke (or coal char), sawdust, salt and other raw materials through high temperature smelting by resistance furnace. Green silicon carbide Physical properties 1.Color:Green 2.Hardness: Knoop2600 3.MohsHardness: 9.4(min) 4.Specific Gravity3.9 g/cm3 Green silicon carbide chemical composition 1. SiC: 98.5%-99.5% 2.Fe2O3: 0.05-0.1% 3.F.C:0.1-0.2% Green silicon carbide applications Bonded abrasive tool Coated abrasive tool Reusable abrasive Grinding,lapping & polishing medium Resin/Ceramic grinding wheels & grinding media
