Construction: Steelmaking arc furnace inputs electric energy into furnace by graphite electrode. Electric arc producing between electrode tips and furnace burden is used as heat source to smelt steel. The heat source of electric arc furnace is electric energy. Atmosphere inside the furnace can be adjusted, which is helpful to melt steels containing easier oxidation of elements. Sh series three-phase steelmaking arc furnace is used to smelt high-quality carbon steel and all kinds of ferro-alloy steel. The designed volume is from 0.5-150t. And the rate power of transformer can Equipment constitution Purpose: Electric furnace transformer, short net, electrode lifting device, current conducting arm, furnace lid, furnace lid lifting and rotary device, furnace body, furnace titling device, ladle cart, water cooling system, compressed air system, hydraulic system, charging system, high voltage electric system, low voltage electric control system, basic automation and computer control system. Main parameter and chosen type Container
SH steelmaking arc furnace Usage : Steelmaking electric arc furnace inputs electric energy into furnace by graphite electrode. Electric arc producing between electrode tips and furnace burden is used as heat source to smelt steel. The heat source of electric arc furnace is electric energy. Atmosphere inside the furnace can be adjusted, which is helpful to melt steels containing easier oxidation of elements. SH series three-phase steelmaking arc furnace is used to smelt high-quality carbon steel and all kinds of ferro-alloy steel. The designed volume is from 0.5-150t. And the rate power of transformer can reach 120 MVA. Constitution: Electric arc furnace transformer, short net, electrode lifting device, current conducting arm, furnace lid, furnace lid lifting and rotary device, furnace body, furnace titling device, ladle cart, water cooling system, compressed air system, hydraulic system, charging system, high voltage electric system, low voltage electric control system, basic automation and computer control system.
SH steelmaking arc furnace Usage : Steelmaking electric arc furnace inputs electric energy into furnace by graphite electrode. Electric arc producing between electrode tips and furnace burden is used as heat source to smelt steel. The heat source of electric arc furnace is electric energy. Atmosphere inside the furnace can be adjusted, which is helpful to melt steels containing easier oxidation of elements. SH series three-phase steelmaking arc furnace is used to smelt high-quality carbon steel and all kinds of ferro-alloy steel. The designed volume is from 0.5-150t. And the rate power of transformer can reach 120 MVA. Constitution: Electric arc furnace transformer, short net, electrode lifting device, current conducting arm, furnace lid, furnace lid lifting and rotary device, furnace body, furnace titling device, ladle cart, water cooling system, compressed air system, hydraulic system, charging system, high voltage electric system, low voltage electric control system, basic automation and computer control system.
Construction: Steelmaking arc furnace inputs electric energy into furnace by graphite electrode. Electric arc producing between electrode tips and furnace burden is used as heat source to smelt steel. The heat source of electric arc furnace is electric energy. Atmosphere inside the furnace can be adjusted, which is helpful to melt steels containing easier oxidation of elements. Sh series three-phase steelmaking arc furnace is used to smelt high-quality carbon steel and all kinds of ferro-alloy steel. The designed volume is from 0.5-150t. And the rate power of transformer can Equipment constitution Purpose: Electric furnace transformer, short net, electrode lifting device, current conducting arm, furnace lid, furnace lid lifting and rotary device, furnace body, furnace titling device, ladle cart, water cooling system, compressed air system, hydraulic system, charging system, high voltage electric system, low voltage electric control system, basic automation and computer control system. Main parameter and chosen type Container
Condition: New Type: Arc Furnace, SH steelmaking arc furnace Usage: Melting Furnace Place of Origin: Shaanxi, China (Mainland) Brand Name: SHOO-IN Model Number: SH-1 Voltage: depends on furnace capacity Power(W): depends on furnace capacity Dimension(L*W*H): depends on furnace capacity Weight: depends on furnace capacity Certification:ISO9001:2008;ISO14001:2004 Warranty: 1year After-sales Service Provided: Engineers available to service machinery overseas Item: electric arc furnace Capacity: 0.5t-150t Company: Manufacture, factory Installation: local installation
High impedance electric arc furnace Usage: It is used to melt plain steel, high-quality carbon steel and kinds of alloy steel. It's used to scrap steel operation, scrap steel and molten iron charging operation, scrap and pellet, pre-heating scrap, hot-pressing reduced iron, sponge iron, etc. Features: The primary loop series reactor can improve the system impedance to realize the secondary higher voltage. It operates with long arc and low current. The electric arc is stable and the arc power is high. Various performance indicators approach direct current arc furnace. On-load voltage regulation is adopted during the operation of arc furnace. The structure of furnace body is frame type water cooling structure. The furnace shells up and down can be taken down. Proportional value is used to control electrode lifting, the rotary of furnace lid and the furnace body tilting. This device is installed with the whole set PLC system and computer control system, computer image monitoring system and neuron network artificial intelligent electrode control adjustment system. The device is also set with oxygen lance of furnace door, speed oxygen lance of furnace wall, burner and carbon injection system. Constitution: furnace body, tilting device, electrode lifting device, furnace lid lifting and rotary device, cooling water and its alarming display device, hydraulic station, compressed air system, feeding system, high-voltage switch system, transformer, series reactor, low-voltage power supply system, computer control system and picture monitoring system, neuron network artificial intelligent electrode control adjustment system. Main performance parameter: Smelting period/tap-to-tap cycle: 60min (ultra high power) Power consumption: ?¤ 380 KWh/t (scrap) Consumption of electrode ?¤ 2.5Kg/t (scrap) Service life of water cooling furnace wall ?¥ 3500 ( per furnace) The average oxygen consumption: 25-50 M3/t
High impedance electric arc furnace Usage: It is used to melt plain steel, high-quality carbon steel and kinds of alloy steel. It's used to scrap steel operation, scrap steel and molten iron charging operation, scrap and pellet, pre-heating scrap, hot-pressing reduced iron, sponge iron, etc. Features: The primary loop series reactor can improve the system impedance to realize the secondary higher voltage. It operates with long arc and low current. The electric arc is stable and the arc power is high. Various performance indicators approach direct current arc furnace. On-load voltage regulation is adopted during the operation of arc furnace. The structure of furnace body is frame type water cooling structure. The furnace shells up and down can be taken down. Proportional value is used to control electrode lifting, the rotary of furnace lid and the furnace body tilting. This device is installed with the whole set PLC system and computer control system, computer image monitoring system and neuron network artificial intelligent electrode control adjustment system. The device is also set with oxygen lance of furnace door, speed oxygen lance of furnace wall, burner and carbon injection system. Constitution: furnace body, tilting device, electrode lifting device, furnace lid lifting and rotary device, cooling water and its alarming display device, hydraulic station, compressed air system, feeding system, high-voltage switch system, transformer, series reactor, low-voltage power supply system, computer control system and picture monitoring system, neuron network artificial intelligent electrode control adjustment system. Main performance parameter: Smelting period/tap-to-tap cycle: 60min (ultra high power) Power consumption: ?¤ 380 KWh/t (scrap) Consumption of electrode ?¤ 2.5Kg/t (scrap) Service life of water cooling furnace wall ?¥ 3500 ( per furnace) The average oxygen consumption: 25-50 M3/t
High impedance electric arc furnace Usage: It is used to melt plain steel, high-quality carbon steel and kinds of alloy steel. It's used to scrap steel operation, scrap steel and molten iron charging operation, scrap and pellet, pre-heating scrap, hot-pressing reduced iron, sponge iron, etc. Features: The primary loop series reactor can improve the system impedance to realize the secondary higher voltage. It operates with long arc and low current. The electric arc is stable and the arc power is high. Various performance indicators approach direct current arc furnace. On-load voltage regulation is adopted during the operation of arc furnace. The structure of furnace body is frame type water cooling structure. The furnace shells up and down can be taken down. Proportional value is used to control electrode lifting, the rotary of furnace lid and the furnace body tilting. This device is installed with the whole set PLC system and computer control system, computer image monitoring system and neuron network artificial intelligent electrode control adjustment system. The device is also set with oxygen lance of furnace door, speed oxygen lance of furnace wall, burner and carbon injection system. Constitution: furnace body, tilting device, electrode lifting device, furnace lid lifting and rotary device, cooling water and its alarming display device, hydraulic station, compressed air system, feeding system, high-voltage switch system, transformer, series reactor, low-voltage power supply system, computer control system and picture monitoring system, neuron network artificial intelligent electrode control adjustment system. Main performance parameter: Smelting period/tap-to-tap cycle: 60min (ultra high power) Power consumption: ?¤ 380 KWh/t (scrap) Consumption of electrode ?¤ 2.5Kg/t (scrap) Service life of water cooling furnace wall ?¥ 3500 ( per furnace) The average oxygen consumption: 25-50 M3/t
Carbon Blocks used in furnace having a great alternative against Petcoke. As it has high melting power and cheap as compared to Petcoke. Here in India, we are a supplier and exporters of Carbon blocks. Parameters- Total moisture (Mt): 1.80% Ash(Aad): 13.07 Volatile matter (Vad): 13.94 Fixed Carbon (FCad): 77.88 Sulfur (S): 3.10
This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel. Physical Description On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm Chemical Composition Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%. Packing: Loose in container Loading: in 20 Container For further information, please feel free to contact us.
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
Heat Area - 100m2 Dimension(W*H*D) - 450*975*782mm Weight - 70kg Air inlet pipe - 50mm Air outlet pipe - 80mm Auto-burning Time - 13h-27h Fuel Consumption - 0.8-1.8kg/h Efficiency - 90% Hopper Capacity - 20kg Electronic consumption - 100-400w/h Rating voltage - 230v
Plate Iron Scrap is a material that a visual inspection appears of regular shape. This by-product is formed after slag processing in electrometallurgical furnaces. Its chemical composition is homogeneous and stable with about Fe 90% and P around 1.4%, S 0.8% and C 1.4%. The max weight of each pieces is up to 1 ton. The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.
We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
Fly ash, granulated iron blast furnace slag (gbfs), potassium feldspar , sodium feldspar , stpp sodium tripolyphosphate, zirconium silicates & zirconium flours.
These cast iron skulls are a by-product derived from the cast iron foundries. The byproduct is a ferrous by-product which can be utilised in an electric arc furnace to produce crude steel. Physical Description On visual inspection, it appears to be made up of irregular shapes. The material is separated by magnet and screener. Packing: Loose in container Loading: in 20 Container For further information, please feel free to contact us.
Refractory bricks, high alumina bricks, acid proof bricks, tiles and castables, all mortars and fire clay, low cement castables, insulating castables, conventional dense refractory bricks, insulation bricks, cold face, hot face insulation bricks, hot face insulation bricks, acid resistant bricks/components, membranes, acid resistant cement, construction chemicals, class 1 ar tiles and bricks 38mm and 75mm, 4457 vitrified ar tiles with 0% water absorption, 20mm & 25m, primer, mastics, pot. silicate cement, coerce cement, furnace based cement, crushed refractory boiler bed material, acid resistant tiles, acid resistant brick fireclay type, acid resistant brick red shale type, bitumen primer, epoxy resin & hardner, furan powder and syrup solution,.
Lead slag produced from rotary furnace lead percentage is 20 to 25%
