Smoke & co detectorHeat detector
ntc thermal sensor
tamper resistant pins for battery4 digits temperature led display
shockproof design, suitable for vehicle usecan set maximum or minimum alarm temperature simultaneously
test and hush button, auto resetreal ambient temperature correctable
on-top battery compartment, easy for battery replacementauto reset /power off reset optional
Execute criterion: en54-4, ul539, en14604, ul217
dustproof, mothproof and anti-white light
ElectrovalveManipulator
gas species: natural gas, lpg, man-made coal gas and other noncorrosive gaspower supply: 8vdc-16vdc 12vdc-26vdc
valve body material: brass alloyoperation press: 1.6mpa
material for sealing: nbr rubbervalve specification: 4 fen (1fen=1/3centimeter), 6fen, 1 inch, 1.25 inch, 1.5 inch
test operating pressure: 25kpa
torque: 10kg.Cm~30kg.Cm~40kg.Cm~50kg.Cm11069.540mm
Alarm bellBreak glass manual call point
size: 2", 3", 4", 6", 8", 9", 10", 12"rated voltage :12vdc or 24vdc / 220vac optional
volume: over 105db/mconsumption: 10w
working voltage : 12vdc/24vdc
With waterproof cover manual call pointSiren with strobe
2170 Sd13 Smoke Detector Fire Alarm Suppliers
Short on time? Let Sd13 Smoke Detector Fire Alarm sellers contact you.
Enerna IoTech WiFi Smart IoT Wireless Smoke Fire Alarm Detector Smoke Detector. Wireless smart photoelectric smoke sensor, with Ultra-low-power MCU design. It is capable of real-time detecting the Presence of smoke. Once detect danger of fire smoke, red LED will be ON, and alarming to alert you and your family timely.
Enerna IoTech WiFi Smart IoT Wireless Smoke Fire Alarm Detector. the whole solution is just smoke detector alarm to app Platform directly, can be real-time monitoring remotely. this solution Can save much cost from main alarm panels, and it also can be linkage to Other smart device to work together. It will be easy to match different Project applications, such as building office, warehouse, supermarket, Factory, restaurant, hotel
Enerna IoTech WiFi Smart IoT Wireless Smoke Fire Alarm Detector is a smart Photoelectric smoke sensor, with ultra-low-power MCU design. It is Capable of real-time detecting the presence of smoke. Once detect danger of fire smoke, red LED will be ON, and alarming to alert you and your family timely. It can be widely used in household, lounge, Coffee house, dancing hall, and any other places need fire alarm Monitoring.
this Enerna IoTech WiFi Smart IoT Wireless Smoke Fire Alarm Detector can work Standalone. When detects smoke, alarm will sound and send push message for alert. Meanwhile, it can link with other smart products on Tuya Platform. Keep your house safe.
Enerna IoTech WiFi Smart IoT Wireless Smoke Fire Alarm Detector Function:
1. APP remote control
2. Link with TUYA smart home products together
3. Maze technology and small size
4. 80dB sound alarm alert
5. Ultra low power
Model No. SR-812PC-4
Operating voltage DC9~35V
Alarm temperature N/A
Static current 13mA(NC);4mA(NO)
Alarm current 9mA(NC);19mA(NO)
Alarm output Relay output
Installation Ceiling mounted
Sensitivity 2.06%ft±1.3%ft
Working environment -10~+50(â?¤95%RH No congelation)
Dimension 100*
Operating voltage DC9~35V
Alarm temperature 57
Static current 20uA
Alarm current 35mA@DC12V;83m@DC24V
Alarm output Remote LED indicator
Installation Ceiling mounted
Sensitivity 0.15dB/m(±0.03dB/M)
Working environment -10~+50(â?¤95%RH No congelation)
Dimension 100*46mm
SNC-300 non-addressable photoelectric smoke detectors are state-of-the-art detectors suitable for connection to
2-wire or 4-wire non-addressable fire detection control and indicating equipment, or to addressable fire detection
Control and indicating equipment that can accept non-addressable type detectors.
Advanced electronics in conjunction with a photoelectric smoke sensing chamber provide early detection of fire
And high immunity against unwanted alarms.
Photoelectric smoke sensor
Analogue detection discrimination
Dual leds for 360° visibility
2-wire and 4-wire models for dc 12 v and dc 24 v operation
4-wire model for dc 48 v operation
4-wire models available with a n/o alarm relay output
4-wire models available with auto-reset
2-wire models available with remote led output
Connects to zone monitor for use with addressable control and indicating equipment
Snc-300 non-addressable photoelectric smoke/heat detectors are state-of-the-art detectors suitable for connection
To 2-wire or 4-wire non-addressable fire detection control and indicating equipment, or to addressable fire detection
Control and indicating equipment that can accept non-addressable type detectors.
Advanced electronics in conjunction with a photoelectric smoke sensing chamber and an electronic thermistor
Provide early detection of fire and high immunity against unwanted alarms. The heat sensor provides sensitive
Rate-of-rise operation or fixed-temperature operation when the response threshold value is exceeded.
Photoelectric smoke and heat sensors
Analogue detection discrimination
Dual leds for 360° visibility
2-wire and 4-wire models for dc 12 v and dc 24 v operation
4-wire model for dc 48 v operation
4-wire models available with a n/o alarm relay output
4-wire models available with auto-reset
2-wire models available with remote led output
Connects to zone monitor for use with addressable control and indicating equipment
1. Easy installation and maintenance
2. Light Labyrinth with High stability & High accuracy
3. High adaptability to the ambient, with dustproof, mothproof, moisture proof and anti-white light function
4. This is 4 wire type
5. DC 9-35V wide voltage operating a range
6.Low standby current
7. Power supply non-polarized input
8. Twin LED for 360 degrees visual
9. Flashing LED power indicator
10. The alarm output is relay output
11. Metal shield, anti-electromagnetic interference
12. Two-year limited warranty
13. Suit for detecting the smoke in the house, shop, hotel, restaurant, office building, school, etc...
The NFS-3030 is a fire alarm control panel (FACP) manufactured by Notifier. It is designed for use in small to medium-sized fire protection systems and provides effective fire detection and alarm notification. The NFS-3030 features a compact design and advanced microprocessor technology, making it easy to install and program. The control panel supports up to 384 points and includes built-in communication options, such as analog dialer and network interfaces, for remote access and system integration. It is compatible with a range of Notifier fire detectors, modules, and accessories, providing versatility and customization for specific fire protection needs. The NFS-3030 is a cost-effective and reliable fire alarm control panel from Notifier.
The NFS2-640 is a fire alarm control panel (FACP) manufactured by Notifier. It is designed for use in medium to large-scale fire protection systems and provides reliable fire detection and alarm notification. The NFS2-640 features a compact design and advanced microprocessor technology, allowing for easy installation and programming. The control panel supports up to 640 points and includes built-in networking capabilities for remote access and system integration. It is compatible with a range of Notifier fire detectors, modules, and accessories, offering flexibility and customization for specific fire protection needs. The NFS2-640 is a feature-rich and reliable fire alarm control panel from Notifier.
