1.Brand name jianda Surface pe, s, m Size 1mx10m, 1mx8m Fetus: composite tires or polyester With one side adhesive side pe film as a benchmark, can customize the double-sided adhesive/sand shale surface/aluminum foil/face/colour sand surface Type 2: standard: gb/t23441-2009 Low tender degrees: - 20 or 25 Body: polyester tire Thickness of 1.5 mm at least Packed in rolls with pallet/ or as per clients' requirement
It uses high-quality butimen with SBS thermoplastic elastomer as modification additive and prepared by special technology. There is reinforcment in the middle and covered with various surface materials. Advantage: 1. Excellent low temperature resistance. 2. High tensile strength and elongation. 3. Excellent tear, corrosion and weather resistance. 4. Hot melt construction with reliable and durable seams. Application: Waterproof and moisture proof works for roof and underground space of various buildings. Specification: 1. Thickness: 3/4/5mm 2. Width: 1000/2000mm 3. Length: 10/15m
The products are made by soaking the base in bituminous or thermo plasticity elastomeror thermoplastics modified bitumenous, then covering double faces with elastomer(SBS)or thermoplastics(APP,APAO,APL)modified bitumenous, and last finishing the upward face with fine sands, mineral slates(or grains)or polythene membrane while downward face with fine sands or polythene membrane. 100mm*10m
The products are made by soaking the base in bituminous or thermo plasticity elastomer(such an styrene butadiene styrenef¼SBS),or thermoplastics(such as atactic Polypropylene---APP,APAO,APL)modified bitumenous, then covering double faces with elastomer(SBS)or thermoplastics(APP,APAO,APL)modified bitumenous, and last finishing the upward face with fine sands, mineral slates(or grains)or polythene membrane while downward face with fine sands or polythene membrane. good self heating, easy application, and long service, etc.
Description: SBS (styrene-butadiene-styrene) thermoplastic elastomeric modified bitumen waterproof membrane is a waterproofing membrane with polyester felt,glass fiber or glass fiber polyester felt as reinforcement,finishing the upper surface with PE film,fine sand or mineral granule. APP (Atactic Polypropylene) modified bitumen membrane is made by saturating the base in bitumen, or thermoplastic elastomer (such as APP, APAO, APO), reinforced with polyester or fiberglass, finishing the upward face with polythene membrane, fine sands or mineral slates (or grains) or etc. Specification: Thickness: 3mm 4mm 5mm Width: 1m Length: 7.5m/10m or customized Base: Polyester/Fiberglass Felt Surface: PE film, Aluminum foil, Yellow sand, Mineral Particle
SBS modified bitumen waterproof membrane takes SBS (styrene-butadiene- styrene) thermoplastic elastomer modified asphalt mixed with additives as base materials, using premium polyester (PY), fiberglass (G), fiberglass & polyethylene felt (PYG) as matrix , and adopting sand (S), mineral granule (M), polyethylene film (PE), aluminum foil etc as dip-coat, which is produced by stirring and grinding with special equipment. Features A)Good low temperature flexibility,it has no crack when temperature drops into -20â??;Excellent heat resistance, it has no flow when temperature reaches 90â?? B)Great tensity,prolonged life span,easy to use C)Suitable forâ? and â?¡grade constructional waterproofing project,especially for cold area and the project of frequent structural deformation Size Available â?¢Width-3.28ftï¼?1mï¼? â?¢Length-24.6ft(7.5m) 32.8ft(10m)49.2ft(15m) â?¢Thickness- PY (3mm,4mm,5mm) G (3mm,4mm) APP modified bitumen waterproofing membrane based on APP (atactic polypropylene) or APAO, APO (It is reported that tiring polymer) modified asphalt roofing, high-quality polyester felt, fiberglass mat base for the child, with fine sand and mineral tablets (piece) material, PE film for the cladding material, the use of advanced technology refined plastomer modified bitumen membrane. Features A)Good elongation;Good anti-weathering;Excellent flexibility B)Strong adhesion;High strength;Anti-abrasion and anti-impact C)Superior High and low temperature resistance,especially for hot areas D)Easy to apply,heat-welded;Anti-corrosion,anti-mildew ADVANTAGES â?¢Over 1000 cases in waterproofing projects â?¢Accredited contract observing enterprise â?¢15 years of experience in waterproofing industry â?¢Self-contained production line,sound and completed production management systems â?¢Multiple advanced first-class production devices,laboratories,experienced researching panels â?¢3 years of innovation in production craftmanship and 10 proprietary products Guangdong Tenjoy has two brands of building materials-- Tenjoy,Zolon,fits in the needs of residential construction and industrial construction waterproofing projects,which is specialized in the development,production and sales of waterproofing material,including waterproofing membrane,waterproof coating,waterproofing mortar,lost circulation material, water stop and so forth. Given the strong power in product development,a wide range of measuring instruments,the automatic production line of bituminous waterproofing membrane and macromolecule waterproof coating,water stop,automatic paint mixer and racking machine,we can fully meet the needs of domestic major engineering projects with the annual production capacity of 10 million square meters in waterproof membrane,60 thousand tons of paint,8 tons of waterproof slurry.
Specification thickness:2mm 3mm 4mm 5mm width:1m length:7.5m,10m,15m Certificate CE,ASTM standard, ISO Pakaging 7.5sqm or 10sqm per roll plastic sack by rolls or pallet
Tearing strength: 250/350 n
The elastomeric SBS modified asphalt waterproof rolling material is made of styrene butadiene-styrene rubber modified asphalt as coating. It is made of glass fiber felt, polyester felt and glass fiber reinforced polyester felt as the tread material. Features: Strong impervious performance and good anti-aging ability Acid and alkali resistant, with a service life of 30 years Good endurance climate capability Can be used in low temperature environments with long life High tensile strength, high elongation, good dimensional stability
Product category: 1. According to reinforcement: polyester felt(PY) , glass fiber mat(G) and glass fiber reinforced polyester felt(PY) 2. Acoording to isolation materials: upper surface: polyethylene film(PE), sand(S) and mineral slates(M) 3. According to membrane performace: I Grade and II Grade Features: 1. With high tensile strength, high elongation rate and strong adaptability to the shrinkage deformation and cracking of the infrastructure. 2. Excellent resistant to high and low temperature, applicable for hot and cold regions, especially for cold regions 3. Good resistant to acid and alkali corrosion, weather resistance 4. Construction convenience, hot melt method and cold adhesion method. Usage : SBS elastomeric bitumen waterproof membrane is widely used in all kinds of industry and civil building waterproof and seepage waterproof engineering: roof, basement, subway, tunnel, concrete payment bridges, sewage treatment plant, landfill field, canals, water pool, swimming pool etc.
Name is sbs modified bitumen waterproof membrane. Thickness is 3mm. Reisitance temperature is -5 degree celsius. Length is 10 meters. Width is 1 meter. z
Chloride polyethylene This product applies to various waterproof and anti-corrosion projects of industrial and civil buildings, such as roofing, basement, water pool, reservoir, dam, sewage treatment pool, garbage landfill field, etc., it is one of middle and top grade waterproof materials. No. Itemclass nclass lclass w 1tensile strength, mpa5 Tensile force, n/cm 7070 2elongation at break, %200125125 3heat treating size changing rate, %_ 311 4flexibility at low temperature 20¦, crack-free 5permeability resistance (0.3mpa-2h) watertight 6puncture resistance water resistant 1.2mm*1m*20m 1.5mm*1m*20m 2.0mm*1m*20m
Chloride polyethylene This product applies to various waterproof and anti-corrosion projects of industrial and civil buildings, such as roofing, basement, tunnel, cave, water pool, reservoir, dam, toilet, bathroom, floor, sewage treatment pool, garbage landfill field, etc., mainly applies to the waterproof projects of buildings with higher requirements of waterproof grade. No. Item product index Jl2 type n 1tensile strength at break, mpa Normal temperature .05.0 2 elongation at break, % 400250 3tearing strength, kn/m normal temperature 2420 4water tightness0.3mpa-30minregular 0.2mpa-30minregular 5 flexibility at low temperature, ¦ < -30-20 6hot air aging hold-up rate (80¦-168h)tensile strength hold-up rate at break, % 80 Elongation hold-up rate at break, % 70 100 ·± tensile strength hold-up ratecrack -free 7heating elongation and shrinkage, mmelongation
Polyethylene polypropylene polymer composite waterproofing membrane is a polymer composite coil (sheet) which is made of polyethylene resin as the main raw material.Adding various additives,then once formed by calendering process , and is a surface (double-sided) composite polypropylene non-woven fabric . A multi-layer polymer synthetic sheet material is selected, is a new type of waterproof material manufactured by a new technology and process. The product has high tensile strength, strong impermeability, good low temperature flexibility, small expansion coefficient, easy adhesion, small friction coefficient, can be directly used in sand, stable and reliable performance, is a non-toxic, non-polluting Green products.
Polyester linoleum base fabric is a kind of non-woven fabric, which can also be called: tire base fabric, linoleum base fabric, waterproof base fabric. Polyester linoleum base fabric is a non-woven fabric product which is processed by carding, acupuncture reinforcement and dipping and setting of 100% polyester staple fiber . The shape is cloth type. It is made of high-strength fiber and has the characteristics of high tensile strength, corrosion resistance, aging resistance, high temperature resistance, good thermal stability, good permeability and large elongation. It is the first choice for producing modified asphalt waterproofing membrane. It mainly used in construction building construction, roofing engineering, underground engineering, bridge deck engineering, waterproofing of water storage tank, moisture proof and anti-corrosion of building foundation.
Based on SBS modified bitumen waterproofing membrane, it uses butyl and butylbenzene as the self-adhesive material. Advantage: 1. Convenient construction due to cold application. 2. Excellent adhesion to the base. 3. High tensile strength and elongation. 4. Excellent tear and weather resistance. Application: Roof and basement of industrial and civil buildings, municipal engineering, reservoir and swimming pool. Specification: 1. Thickness: 3/4/5mm 2. Width: 1000/2000mm 3. Length: 10m
Waterproofing building material, app modified bitumen waterproofing membrane, sbs modified bitumen waterproofing membrane, epdmwaterproofing membrane , pvc waterproofing membrane, pu waterproofing coating.
Polymer-cement waterproof coating is a kind of two-component waterproof coating composed of synthetic polymer emulsion and various additives, which is composed of liquid and matching powder. It is a kind of waterproof material with high elasticity of synthetic polymer materials and good durability of inorganic materials. It has the characteristics of rigidity and flexibility, and has the extensibility of polymer coating film, water repellency, and high strength of hydraulic cementing material. Good water resistance, easy to wet base bonding Good flexibility, can resist the slight vibration of the building structure and a certain degree of displacement, and can be applied on the wet base and firmly bonded Water-based materials, non-toxic and harmless, non-polluting are environmentally friendly mater.
The self-adhesive modified asphalt waterproofing membrane is a self-adhesive waterproof material which is made of an elastomer such as SBS and an asphalt, a polyethylene film, an aluminum foil as a surface material or a film (double-sided self-adhesive), and an anti-adhesion barrier layer. Self-adhesive rubber asphalt waterproofing membrane is a new type of building waterproofing material with broad development prospects. It has excellent water impermeability, low temperature flexibility, extensibility and cohesiveness. In particular, it has self-healing properties, which are advantages not found in general waterproof materials, and can ensure superior waterproof quality of waterproof engineering.
One-component polyurethane waterproof coating is a kind of reactive curing film-forming polymer waterproof coating.It is made up of isocyanate and polyether as main raw materials, mixed with various additives such as solidifying agent and plasticizer, and is dehydrated and polymerized by high temperature. sherry@henanjax.com
