The products are made by soaking the base in bituminous or thermo plasticity elastomeror thermoplastics modified bitumenous, then covering double faces with elastomer(SBS)or thermoplastics(APP,APAO,APL)modified bitumenous, and last finishing the upward face with fine sands, mineral slates(or grains)or polythene membrane while downward face with fine sands or polythene membrane. 100mm*10m
The products are made by soaking the base in bituminous or thermo plasticity elastomer(such an styrene butadiene styrenef¼SBS),or thermoplastics(such as atactic Polypropylene---APP,APAO,APL)modified bitumenous, then covering double faces with elastomer(SBS)or thermoplastics(APP,APAO,APL)modified bitumenous, and last finishing the upward face with fine sands, mineral slates(or grains)or polythene membrane while downward face with fine sands or polythene membrane. good self heating, easy application, and long service, etc.
Description: SBS (styrene-butadiene-styrene) thermoplastic elastomeric modified bitumen waterproof membrane is a waterproofing membrane with polyester felt,glass fiber or glass fiber polyester felt as reinforcement,finishing the upper surface with PE film,fine sand or mineral granule. APP (Atactic Polypropylene) modified bitumen membrane is made by saturating the base in bitumen, or thermoplastic elastomer (such as APP, APAO, APO), reinforced with polyester or fiberglass, finishing the upward face with polythene membrane, fine sands or mineral slates (or grains) or etc. Specification: Thickness: 3mm 4mm 5mm Width: 1m Length: 7.5m/10m or customized Base: Polyester/Fiberglass Felt Surface: PE film, Aluminum foil, Yellow sand, Mineral Particle
SBS modified bitumen waterproof membrane takes SBS (styrene-butadiene- styrene) thermoplastic elastomer modified asphalt mixed with additives as base materials, using premium polyester (PY), fiberglass (G), fiberglass & polyethylene felt (PYG) as matrix , and adopting sand (S), mineral granule (M), polyethylene film (PE), aluminum foil etc as dip-coat, which is produced by stirring and grinding with special equipment. Features A)Good low temperature flexibility,it has no crack when temperature drops into -20â??;Excellent heat resistance, it has no flow when temperature reaches 90â?? B)Great tensity,prolonged life span,easy to use C)Suitable forâ? and â?¡grade constructional waterproofing project,especially for cold area and the project of frequent structural deformation Size Available â?¢Width-3.28ftï¼?1mï¼? â?¢Length-24.6ft(7.5m) 32.8ft(10m)49.2ft(15m) â?¢Thickness- PY (3mm,4mm,5mm) G (3mm,4mm) APP modified bitumen waterproofing membrane based on APP (atactic polypropylene) or APAO, APO (It is reported that tiring polymer) modified asphalt roofing, high-quality polyester felt, fiberglass mat base for the child, with fine sand and mineral tablets (piece) material, PE film for the cladding material, the use of advanced technology refined plastomer modified bitumen membrane. Features A)Good elongation;Good anti-weathering;Excellent flexibility B)Strong adhesion;High strength;Anti-abrasion and anti-impact C)Superior High and low temperature resistance,especially for hot areas D)Easy to apply,heat-welded;Anti-corrosion,anti-mildew ADVANTAGES â?¢Over 1000 cases in waterproofing projects â?¢Accredited contract observing enterprise â?¢15 years of experience in waterproofing industry â?¢Self-contained production line,sound and completed production management systems â?¢Multiple advanced first-class production devices,laboratories,experienced researching panels â?¢3 years of innovation in production craftmanship and 10 proprietary products Guangdong Tenjoy has two brands of building materials-- Tenjoy,Zolon,fits in the needs of residential construction and industrial construction waterproofing projects,which is specialized in the development,production and sales of waterproofing material,including waterproofing membrane,waterproof coating,waterproofing mortar,lost circulation material, water stop and so forth. Given the strong power in product development,a wide range of measuring instruments,the automatic production line of bituminous waterproofing membrane and macromolecule waterproof coating,water stop,automatic paint mixer and racking machine,we can fully meet the needs of domestic major engineering projects with the annual production capacity of 10 million square meters in waterproof membrane,60 thousand tons of paint,8 tons of waterproof slurry.
Specification thickness:2mm 3mm 4mm 5mm width:1m length:7.5m,10m,15m Certificate CE,ASTM standard, ISO Pakaging 7.5sqm or 10sqm per roll plastic sack by rolls or pallet
Tearing strength: 250/350 n
Product category: 1. According to reinforcement: polyester felt(PY) , glass fiber mat(G) and glass fiber reinforced polyester felt(PY) 2. Acoording to isolation materials: upper surface: polyethylene film(PE), sand(S) and mineral slates(M) 3. According to membrane performace: I Grade and II Grade Features: 1. With high tensile strength, high elongation rate and strong adaptability to the shrinkage deformation and cracking of the infrastructure. 2. Excellent resistant to high and low temperature, applicable for hot and cold regions, especially for cold regions 3. Good resistant to acid and alkali corrosion, weather resistance 4. Construction convenience, hot melt method and cold adhesion method. Usage : SBS elastomeric bitumen waterproof membrane is widely used in all kinds of industry and civil building waterproof and seepage waterproof engineering: roof, basement, subway, tunnel, concrete payment bridges, sewage treatment plant, landfill field, canals, water pool, swimming pool etc.
1. Capacity: 5 to 10 million square meters per year. 2. Carrier: Polyester, fiberglass, composite 3. Modifier: SBS, APP 4. Surfacing material: sand, slate, PE film, aluminum foil etc., Embossed or plain. 5. Speed: 0~40m/min, adjustable 6. Total installed power: 110~700kwh 7. Fuel consumption: 0.6 million ~2 million kcal/h 8. Water consumption: 0.2 t/day 9. Operator: 8~12 10. Min size of main workshop: 60,15,8 (L*W*H) 9 pieces of 40 feet HQ, 16 pieces of 40 feet OT.
SBS Elastomer modified bitumen membrane is SBS thermoplastic elastomer modified asphalt roofing, high-quality polyester felt, glass fiber mat, glass reinforced polyester mat for the child based, sand, mineral therapy, PE film, aluminum as cladding material, the use of special mechanical mixing and grinding of the elastomer modified bitumen membrane. Plastic modified bitumen waterproofing membrane APA0 or APP0, AP0 to modified asphalt roofing, high-quality polyester felt, glass fiber mat for the child based, sand, mineral grains chat, PE coverage of membrane materials, use of advanced technology refined plastic modified bitumen membrane. BRAND:XINLEI SPECIFICATIONS: 1.Width:1m or as customized 2.Length:from 5-20Meters as customeized 3.Thickness:2/3/4/5mm 4.Face:PE film,colorful sand,mineral granules and Aluminium Foil anti-sunshine and anti-ageing
The sbs modified bitumen waterproof membrane is in polymer modified bitumen for coating,long fiber polyester fiber felt for tire body,metal foil,fine for finish,polyethylene film for isolation layer of a kind of soft waterproof material.Mainly used for high speed railway bridge deck waterproof,this product has good performance, and waterproof construction simple characteristics. Features: 1) APP/SBS modified bitumen waterproof membrane: a) Conforms to the national standards b) SBS modified bitumen waterproof membrane is specially used as waterproof material in cold area c) APP is specially suitable for areas of high temperature and of strong sun-shine Item APP/SBS modified bitumen waterproof membrane Brand Xinlei Waterproof Grade FirstSecond Base PY G Cover PE S M Al Thickness/3/4mm Color Black PE film(or other colors) Yellow/green/other Fine Sand Grey/Green/other MineralGrains/Flakes Aluminum Foil Notes PY------Polyester Base G-------Glassfibre Base
Advantages of SBS Self Adhesive Waterproofing Membrane 1) Unique self-healing function 2) Strongcohesion with base surface 3) Superiorbond strength between membrane and membrane 4) Excellentelongation that can adapt base surfacedeformation and cracking 5) Simple in construction Application of SBS Self Adhesive Waterproofing Membrane 1. Building roof (Non-outer appearances) 2. Basements, tunnels, pools and other water projects 3. Non-exposed roofing projects that can not use fire to performance
Polythene polymer Compound Waterproof Membrane High polymer polyethylene polypropylene compound waterproof membrane is made from non-woven fabrics,polypropylene and high grade Polyethylene raw material, is a kind of compound type waterproof material with 4 layer flaky materials of enhanced protective layer, ageing resistance layer, waterproofing layer and tackifying and enhanced layer by adding additives . High polymer polyethylene polypropylene compound waterproof membrane is made by multiple-ply different materials, so its performance has been enhanced significantly, especially its aging and weather resistance layer enables the membrane possess more longer service life with up to 50 years. Both the upper and lower surfaces of it is rough, and non-woven fibers were irregular cross-structure to form three-dimensional mesh so that it has high tensile strength, permeability and good low temperature flexibility, small swelling and friction coefficient and low temperature effect, with strong deformation adaptability, which can be used in conjunction with a variety of adhesives and has a good bonding effect. High polymer polyethylene polypropylene compound waterproof membrane is a series of polyethylene resin for waterproofing membrane, and it is a non-toxic, pollution-free green product Fields of application: The series-XM115-150 multilayered polymer polyethylene fiber waterproofing membrane is suitable for various industrial , civil building roofing , underground waterproofing, and metallurgy , chemical industry , water conservancy, environmental protection , mining and other seepage control projects. Wet laid method: Base plane treatment ? Scraping coat and preparation polymer cement slurry (sand) ? Node details treatment (attached layer) ? Laid waterproof membrane ? half header treatment ? The waterproof layer inspection ? protective layer's construction
TJ 441 Self-Adhered Polymer Modified Bitumen Waterproof Membrane is based on SBS elastmoeric modified waterproof membrane,laminating with a special PET film,which can be categorized into two types--N and PY. N has PE(Polyethylene),PET,and D(Non-PET film with adhesion in double side);PY has PE,S(sand),AL(Aluminum Foil),D;Its characteristics lie in suitable for wet substrate,no need to find flat substrate and painted surface disposal,free torch heat,integrating with the mortar or concrete perfectly. It's safe and environmental protection. Features: Supreme adhesion integrates with the substrate forever with special patent formula Suitable for various substrates enables to lower resource waste massively and save the cost and time Unique operation craft of wet treatment,free from primer,no need of heat melt Size Available Width-3.28ftï¼?1m Length-32.8ft(10m) 49.2ft(15m)65.6ft(20m) Thickness- N(1.2mm,1.5mm,2mm) G (2mm,3mm,4mm) Packaging,storage and shipping Product is packed into rolls with plastic woven bag Avoid sunlight and rain,store it under current and dry. The temperature should lower than 50 ,putting it upright and keep the story less than 2 TJ-789 TPO Waterproof Membrane TPO Waterproof Membrane takes TPO elastomer as base material,adding fire retardant filling,anti weathering pigment filling,anti oxidization agent and light stabilizer,through high speed mix,melting extrusion,and calendering into waterproofing sheet material. Firstly developed in the early 20 centuries,it is extensively used for rooftop waterproofing projects under the installation of mechanical fasteners. With the combination of the great anti-weathering of EPDM and the weldability of PVC sheet,it defines the leading position in waterproofing industry TPO waterproof membrane has 0% plasticizer and no chloride,generating zero harmful gas when welding Application: Extensively used for the waterproof projects of industrial and residential buildings and public constructions Installation Guide 1. Substrate Requirements: Clean,no bugle and pointy object 2.Installation Steps(Mechanical Fastener) Substrate Clean Pave PE film Pave Insulation board Pre-applied TPO Mechanical Fasten TPO Hot air Welding TPO Detailed Spots Strengthening Test Check 3. Installation 1) Clean the litters,dust on the substrate 2)Pave a layer of PE film,the overlap uses butyl adhesive tape to glue 3)Pave Extruded polystyrene foam insulation board(XPS),using exclusive fasteners to fasten the board 4)Pre-applied TPO membrane: Lay the TPO membrane on the insulation board in accordance with the snap line,paving direction should be perpendicular with the wave of profiled steel sheet,dispose the loose TOP membrane as the outline on the insulation board. Membrane remains flat and even,overlap is 12cm and appropriate trim is needed 5)Fasten the TPO membrane: Align edge of mark line 30mm install the fasteners and elastics 6)Membrane Overlap: One piece membrane laid on the other,use the automatic hot air welding machine to weld 7) Detailed Spots Strengthening: Trim adequate TPO membrane for detailed spots,use portable hot welding machine weld on the TPO membrane 8)TPO membrane edge treatment: Use batten to fasten the edge along with sealants
TJ-789 TPO Waterproof Membrane TPO Waterproof Membrane takes TPO elastomer as base material,adding fire retardant filling,anti weathering pigment filling,anti oxidization agent and light stabilizer,through high speed mix,melting extrusion,and calendering into waterproofing sheet material. Firstly developed in the early 20 centuries,it is extensively used for rooftop waterproofing projects under the installation of mechanical fasteners. With the combination of the great anti-weathering of EPDM and the weldability of PVC sheet,it defines the leading position in waterproofing industry TPO waterproof membrane has 0% plasticizer and no chloride,generating zero harmful gas when welding Application: Extensively used for the waterproof projects of industrial and residential buildings and public constructions Installation Guide 1. Substrate Requirements: Clean,no bugle and pointy object 2.Installation Steps(Mechanical Fastener) Substrate Clean Pave PE film Pave Insulation board Pre-applied TPO Mechanical Fasten TPO Hot air Welding TPO Detailed Spots Strengthening Test Check 3. Installation 1) Clean the litters,dust on the substrate 2)Pave a layer of PE film,the overlap uses butyl adhesive tape to glue 3)Pave Extruded polystyrene foam insulation board(XPS),using exclusive fasteners to fasten the board 4)Pre-applied TPO membrane: Lay the TPO membrane on the insulation board in accordance with the snap line,paving direction should be perpendicular with the wave of profiled steel sheet,dispose the loose TOP membrane as the outline on the insulation board. Membrane remains flat and even,overlap is 12cm and appropriate trim is needed 5)Fasten the TPO membrane: Align edge of mark line 30mm install the fasteners and elastics 6)Membrane Overlap: One piece membrane laid on the other,use the automatic hot air welding machine to weld 7) Detailed Spots Strengthening: Trim adequate TPO membrane for detailed spots,use portable hot welding machine weld on the TPO membrane 8)TPO membrane edge treatment: Use batten to fasten the edge along with sealants
SBS & APP modified bitumen waterproof membrane, self adhesive bitumen waterproof membrane, self adhesive bitumen flashing tape, polythene polymer compound waterproof membrane.
TJ-952 PVC waterproof membrane takes PVC resin as main ingredient,adding adequate modifiers,antioxidant agents,UV-light absorbents,color agents,filler agents and so forth,through polymerization and extrusion calendering,deformation,cool,inspection,racking,and packaging processing procedures into bendable waterproofing sheet membrane.It possesses high tensile and good elongation,high and low temperature resistance and it has good hot-melting properties. Cold-adhesive and hot-welding is both available when attending to the overlap of membrane,which forms into a solid,enclosed and integrated waterproofed layer. PVC membrane is also called polyester fabric inner reinforcement PVC membrane,which is an plastomeric material. It takes polyester fabric textile as reinforcement felt,via special extrusion craft,making the PVC plastic layer on both sides with polyester reinforcement felt amid into an integration.Cutting-edge PVC plastic layer in combination with mesh polyester fabric gets rise to superior dimension stability and extremely low thermal expansion coefficients. Characteristics Prolonged shelf life,anti-ageing,used for house application can last over 20 years,underground can last over 50 years High tensile strength/elongation,small heat-treatment dimensional variation Great puncture resistance,good anti impact Easy to install and weld solid;Environmental-friendly Strong anti chemical,having special use Specification: Nominal Thickness:1.2/1.5/2.0mm Width:2.0m Length:15/20m or customized Application Guide In combination with the features of PVC membrane,it s usually applied in three methods,such as full-adhesive installation,border adhibiting method and mechanical fastener method. It requires exclusive PVC accessories set to help installation for complicated waterproofing spots. 1:Full-adhesive installation: Using exclusive PVC membrane adhesive set to apply on the substrate under normal condition is called full-adhesive installation 1)Requirement The substrate needs to be smooth,no crack or bugle spots,clean,dry and the humidity is less than 9%,make the chamfer at internal corner and external corner with the diameter is more than 20mm Installation process Substrate treatment Measure,locate and draw lines weak spots strengthening paint the glue on large scale pave the membrane overlap treatment check
TJ-701 EPDM Waterproof Membrane EPDM takes the polymer of three monomers Ethylene,Ethylene Propylene,DCPD(dicyclopentadiene) or ENB(Ethylidene Norbornene) through polymerization,adding adequate IIR(Isobutylene Isoprene Rubber),tenderizer,fortifier,filling agent,promoter,vulcanizing agent formulate into a kind of waterproof material,which enjoys high flexibility and bendable property. Characteristics â?¢Excellent anti-ageing,prolonged longevity;Shelf life can last 50 years â?¢Good strength and tensity/Applicable temperature range(-40~80) â?¢Great high-temperature,low-temperature resistance â?¢Single layer applied is applicable and cold applied Specification Thickness:1.0/1.2/1.5/2.0mm Width:1.2m Length:20m or customized Application Extensively used in basement,tunnel,wall,underground,reservoir,municipal infrastructure,bridge,metro dam and so forth Installation EPDM installation process Clean Substrateadded waterproofed installation in complex spotspaint primerpaint exclusive gluepave membraneedge treatmentpave membraneedge treatmentprotection layer construction Attention 1)Clean the substrate:First layer of slurry or concrete needs to be solid,dry,even,no bugle or crack,clean dust,oil of the substrate before paving the membrane 2)Spot strengthen:Extra intensity treatment at complex spots where drainage and deformation center on before paving the membrane on a large scale 3)Membrane pavement:EPDM waterproofing layer is single or multi-layers structure. As for single layer,the thickness should be more than 1.5mm,as for double layers,it should be more than 2.4mm.
Waterproof materials like SBS/APP modified bitumen waterproof membrane, high polymer waterproof membrane (PVC/EPDM/TPO/EVA/HDPE waterproof membrane), self adhesive bitumen waterproof membrane, cross laminated HDPE bitumen waterproof membrane, polyurethane waterproof coating, polymer cement waterproof coating, asphalt shingle.FOB, C&F, Distributor
Sbs/app modified bitumen waterproofing membrane, self adhesive bitumen waterproofing membranes, self adhesive bitumen flashing tape, self adhesive butyl waterproofing tape, waterproofing membranes, polymer compound waterproofing membranes, liquid bitumen coating.
Self adhesive bitumen flash tape, sealing tape for roof leaking, hatch cover sealing tape, self adhesive waterproof membrane, sbs\app modified bitumen waterproof membrane, pvc\epdm\tpo waterpoof membrane, polythene with pp non woven waterproof membrane, waterproof coating.
