Safety steel lifting automatic permanent magnetic lifter for material handling Description of magnetic plate lifter The magnetic plate lifter are mainly used for lifting the steel plate and round steel, because of the light weight, ease of operation and powerful suction, magnetic lifters are widely applied in ship engineering, warehouse, transportation and machinery manufacturing. Features of magnetic plate lifter: 1. magnetic plate lifter is widely used as lifting tools in factory terminals and warehouse. 2. Safe and reliable, easy to operate, can be used single or combined with other machines to move long and big magnetic iron steels. 3. Using high-performance permanent magnet, ensure the power and high safety. 4. With a "V" style design at the bottom of lifter, can lift both round steel and steel plate. 5. Maintain constant and reliable magnetism without electricity, residual magnetism approach naught. 6. The maximum pull-off force as 3.5 times as rated lifting force which contribute to improve the working conditions of loading operation and labor productivity. 7. The lifting have high resistance to demagnetization, the lifting value will keep constant and stable.
Chemical, chemical raw material, auxiliaries, solvents, paint, coating, rubber, plastic, plasticizer, surfactant, additives, steel pipe, steel tube, stainless steel tube, stainless steel pipe, pipe fitting, flange, fasteners, steel wire, steel accessories.Transportation agent,customs clearance service,
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
These cast iron skulls are a by-product derived from the cast iron foundries. The byproduct is a ferrous by-product which can be utilised in an electric arc furnace to produce crude steel. Physical Description On visual inspection, it appears to be made up of irregular shapes. The material is separated by magnet and screener. Packing: Loose in container Loading: in 20 Container For further information, please feel free to contact us.
We are an OEM Garment factory located in Guangdong China. We manufacture according to your design and specifications and provide private label service with custom packaging if required. We pride ourselves in high quality craftsmanship and transparency with our customers. We try our best to keep MOQ to a minimal and assist our new customers anyway we can; as reference, our MOQ for Safety Steel Toe shoes ranges from 20-500 per fabric SKU. If you have ready designs/logos and would like a mockup sample we will produce them for your consideration.
We are an OEM Garment factory located in Guangdong China. We manufacture according to your design and specifications and provide private label service with custom packaging if required. We pride ourselves in high quality craftsmanship and transparency with our customers. We try our best to keep MOQ to a minimal and assist our new customers anyway we can; as reference, our MOQ for Safety Steel Toe shoes ranges from 20-500 per fabric SKU. If you have ready designs/logos and would like a mockup sample we will produce them for your consideration.
Our magnetic lifters have a magnetic path made by strong NdFeB magnetic material which supplies permanent power There is no other safer more efficient way to lift steel with magnets than with permanent magnetic lifters or permanent lifting magnets Our permanent magnetic lifters are ideal lifting equipment for factories warehouses docks and transportation Specification PML consists of strong NdFeB magnets which provide magnetic flux for lifting Salient Features Eliminates dangerous straps and slings Zero electricity required Safe and lightweight No maintenance and operational cost
Safty factor 3:1 The lifting capacity of the permanent magnetic lifter is incated as 1/3 of the test load, for example, the lifting capacity is 100kg, but hte brdakaway froce is 300kg, to assure the safe operate. Range of application:apply to carry the steel plate, iron block and cylinder iron material, such as the machine spare parts, punch sharper, plastic sharper and all kinds of iron steel material. Carton or wooden case
Utilizing the incredible power of rare earth magnets to ensure optimal capacity with small size and lightweight Range of capacities from 100 to 6,000kg with a 3-3.5:1 safety factor Maintenance free with zero running costs Safety locking devise in the ON position With V-shoe design for handling of round material easily Large and heavy work pieces can be operated safely by only one person Available in 7 models XQFQZQ100: Rated lifting strength: 100kgf Cylindrical lifting strength: 30kgf Maximum pull-off strength: 300-350kgf Operation temperature:
Payment: t/t, l/c Delivery: 20 days after the order confirmation Package: wooden case or as you required We offer customized products for your specific needs.
Product name - Steel Grating Finish - Hot galvanized ,Paint, Untreatment (black/slef color) Weld way Automatic pressure resistance welding Usage - Industrial platform, Corridor laying, Ditch cover plate, Fence, etc Thickness - 3-10mm Bearing bar pitch - 20mm 30mm 40mm Cross bar pitch - 50mm 100mm Style - Plain sheet, Serrated sheet, I type sheet
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
Electric cooking pot pan Electric, gas, oil heating function, different diameter, with cover, without cover Stainless steel ,automatic mixing/stiring ,Automatic dumping save labor ,sanitary ,high efficient ! Welcome order ,good price good quality !
Electric cooking pot pan Can heating by Electric, gas, oil heating function, different diameter, with cover, without cover Stainless steel ,automatic mixing/stiring ,Automatic dumping,save labor ,sanitary ,high efficient ! Welcome order ,good price good quality !
Gas heating cooking pot pan,oil/electrical heating central kitchen cooking pan pot machine . Gas/oil/Electric cooking pot pan Can heating by Electric, gas, oil heating function, different diameter, with cover, without cover Stainless steel ,automatic mixing/stiring ,Automatic dumping,save labor ,sanitary ,high efficient ! Welcome order ,good price good quality !
cooking pan pot machine cooking machine with small and big type ,electric cooking pan ,gas cooking pan pot, oil cooking pot pan ,central kitchen big pan pot Electric cooking pot pan Can heating by Electric, gas, oil heating function, different diameter, with cover, without cover Stainless steel ,automatic mixing/stiring ,Automatic dumping,save labor ,sanitary ,high efficient ! Welcome order ,good price good quality !
Automatic cylinder turnover dough mixing machine for various kind bakery food /wheaten food and so on same this kind food , During operation, the hook and hopper rotate at the same time to make the dough more uniform, the bucket can be automatically turned over and removed, and the mixing head can be lifted, which is convenient for fetching and cleaning. It is equipped with a head up emergency stop device to ensure safe use. Castors/foot-wheel are installed at the bottom for easy movement. Mixing hook ,cylinder ,safety cover all by SUS material . Parameters : 50kg/ 75kg / 100kg / 125 kg/time power 7.75-14.25kw voltage 380v/50hz 1380 * 1160 *1400mm / 1580 *1380*1560 /1650 *1500 *1630 /1680*1550*1650mm Bread dough mixing machine How to making dough Delicious bread dough
Olive Cherry Date seeds Removing Machine Fruit seeds stone Removing machine series fruit different capacity different ,machine are little different ) Apricot kernel remover stone /core removing machine Peach core remover Apricot,Peach,Jujube nut removing machine Red date/Peach and apricot /Green plum / Cherry /Hawthorn /Sandberry /Iraq date /Date de /Marinated peach kernel machine Olive /Li Zi /Nut and butter/Litchi/ Pear stone removing machine Longan /Automatic stone core removal machine of large-scale red date automatic jujube type /Hawthorn / Beach date /Prunus cherry and so on ...about 20-40kind fruit can be stone removing machine Technology advantage : 1. The full-automatic equipment has high degree of automation. The mold conveyor belt can automatically feed and send materials to carry out transportation and core flushing. It only needs to pour the fruit into the feed hopper to complete the separation effect of core and flesh. It can work continuously and solve the problems of low efficiency, labor-consuming and time-consuming of manual core removal. 2. The structure of the machine is composed of stainless steel thick wall square tube and channel steel welding, which makes the equipment more stable during start-up and operation. All parts are assembled with bolts, which makes the operation and maintenance of the equipment more convenient. 3. The raw material of the equipment is made of stainless steel, which meets the hygienic standard of food processing equipment. The conveyor belt is made of imported polyurethane material, which is wear-resistant, tensile, tear resistant and has a longer service life. 4. The operation of the machine is simple and convenient, without long-term care. One person can manage multiple machines at the same time. The transmission system adopts advanced design concept and standardized components. The principle of core punching adopts the process of machine tool to punch the core, so that each equipment meets the high design standard, so that the effect of core removing is good, and the fruit shape is completely unchanged.
Cherry Olive Date Seeds Removing Machine are necessary machine for fruit process . Fruit Seeds Removing machine series fruit different capacity different ,machine are little different ) Apricot kernel remover stone /core removing machine Peach core remover Apricot,Peach,Jujube nut removing machine Red date/Peach and apricot /Green plum / Cherry /Hawthorn /Sandberry /Iraq date /Date de /Marinated peach kernel machine Olive /Li Zi plum /Nut and butter/Litchi/ Pear nuclear machine Longan /Automatic nuclear removal machine of large-scale red date Semi automatic small jujube type /Hawthorn / Beach date /Prunus cherry and so on ... Technology advantage : 1. The full-automatic equipment has high degree of automation. The mold conveyor belt can automatically feed and send materials to carry out transportation and core flushing. It only needs to pour the fruit into the feed hopper to complete the separation effect of core and flesh. It can work continuously and solve the problems of low efficiency, labor-consuming and time-consuming of manual core removal. 2. The structure of the machine is composed of stainless steel thick wall square tube and channel steel welding, which makes the equipment more stable during start-up and operation. All parts are assembled with bolts, which makes the operation and maintenance of the equipment more convenient. 3. The raw material of the equipment is made of stainless steel, which meets the hygienic standard of food processing equipment. The conveyor belt is made of imported polyurethane material, which is wear-resistant, tensile, tear resistant and has a longer service life. 4. The operation of the machine is simple and convenient, without long-term care. One person can manage multiple machines at the same time. The transmission system adopts advanced design concept and standardized components. The principle of core punching adopts the process of machine tool to punch the core, so that each equipment meets the high design standard, so that the effect of core removing is good, and the fruit shape is completely unchanged.
