S&A water and air cooled chillers with refrigeration compressor S&A water and air cooled chiller CW-6100 is developed and produced by S&A supplier of China. CW-6100 has 4.2KW cooling capacity, ±0.5? stability, and Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm; Since January 2016, the warranty period of S&A chiller has extended to 2 years.
Cool Time Coconut Water. Packaging Bottle (12X200ml). Product of Mayora Indonesia.
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
General Purpose Fresh Coir Block (Processed & Compressed Coir) Coir pith blocks ensure high oxygen levels and therefore good drainage properties. They reduce the dormancy period of seeds and promote early sporting in almost all flowering plants and vegetable crops, We can supply coir blocks as Fresh Coir Blocks for vegetables/fruits and High Drain Rose Mix Coir Blocks specially designed to be used with Roses. Can be supplied in different weights, sizes or as per buyer’s requirements. Please contact us for more details and price quotations Advantages of Fresh Coir Blocks: Designed for vegetable and fruit plants Faster binding of soil Resistant to mold & rot; no chemical treatments needed Great air and water permeability Holds the seeds/saplings in place Excellent medium for quick vegetation No removal costs; Naturally degrades over a period of 2 to 5 years time Promotes deep rooting of plants Provides nutrients Easy to install Eco-friendly We can make 5 kg and 15 kg blocks.
1.We use imported base paper from Germany. For solid color, base paper most 80 to 120GSM. For wood base paper is between 70-85 gsm 2. High quality water-base ink- Available over 200 shades in Solid colors and wood grains 3. With clear texture ,high Fidelity meeting international standards. 4. With smooth surface coating 5. Germproof, mould proof, antistatic and wear-resistance. 6. Green environmental protection and Odorlessness which Conforms to the GB18584-2001 standard requirement 7. Can be used for the hot press molding craft, the production efficiency is high. 8. Melamine paper takes shape easily, is widely used for the panel furniture and the decorative yarn. Product Specification: Width: 1230-1260mm or 1300-1800mm Length: 500-1000m For storing: Put it in room to a cool and dry place keep the temperature 20-25°C in room. The best humidity is: 50-60% We can also give you complete decorative solution with Matching Melamine Edge Banding, PU Paper. If you need just need Melamine/prelaminated boards either in MDF / Particle board we can also do so
SENNA PODS Senna has been used as a traditional medicine by ancient cultures all over the world for millennia. Senna is an Arabian name and 9th century writings describe how it was used extensively by Arabian physicians. According to a rare Egyptian medical papyrus, dating to the 16th century BCE, Senna was prescribed by the physicians for their distinguished patients. In North America, native tribes used the seeds (pods) as a mucilaginous medicine for sore throat. The Cherokees used the bruised root, moistened with water, for dressing sores. They also used it in a tea to cure fevers with black spots and paralysis as symptoms. Senna Pods Uses: Taking senna by mouth is effective for short-term treatment of constipation. Senna is an FDA-approved nonprescription drug for adults and children ages 2 years and older. However, in children ages 3-15 years, mineral oil and a medication called lactulose might be more effective than taking senna. Senna also appears to be effective for treating constipation when used in combination with psyllium or docusate sodium. In elderly people, senna plus psyllium is more effective than lactulose for treating ongoing constipation. Senna plus docusate sodium is effective for treating constipation in the elderly and in people who have undergone anorectal surgery. Taking senna appears to be as effective as lactulose, psyllium, and docusate for relieving constipation in people taking opioids or loperamide. Senna Benefits Constipation The most famous use of this herb is as a laxative and a purgative. It is now known that the laxative effects of Senna are due to anthraquinone glycosides known as sennosides. These compounds stimulate intestinal contractions that lead to the rapid expulsion of waste matter. Senna may also be able to soften the stool by assisting the large intestine to absorb more water and adding bulk to faeces. This allows for bowel movements that are quick and smooth as waste passes through the large intestine. Colon Cleanse Senna is often used to clear the bowel before diagnostic tests such as colonoscopies. Cleansing the colon is believed to improve nutrient uptake and support overall colon health. Anti-Parasitic:Senna also works as an effective vermifuge to destroy parasites and expel worms from the intestinal tract. It works best when combined with other anthelmintic herbs (used in the treatment of roundworm), such as ginger or fennel. These herbs increase regularity and reduce the chance of bowel cramps due to Sennaâ??s strong action. Digestive Health In the case of indigestion, Senna contains natural enzymes that help to restore gastric juice secretions in the stomach. Senna, if used in the proper dosage for certain periods of time, has shown potential in reducing irritability in the intestines by improving overall digestion. Senna also contains the anti-inflammatory compound resveratrol which can help to soothe inflammation in the gastrointestinal tract. Skin Health
Air cooled water chiller Name:air cooled water chiller Function:heating and cooling Capacity: from 5 to 50kw Available use area: from 50 to 600 m2 Refrigerant:r407c/r134a/r290/r22 Description:air cooled heat pump water chiller are designed for outdoor installation and for both residential and commercial applications with the ability of 24 hours/day operation. The units are factory tested and on site installation will be completed only by connecting with the water and power supply. Veneer for export only.The demensions in detail refer to our catalogs.
Air cooled water chillers Hcf / hrcf series packaged air cooled water chillers and heat pumps are designed for outdoor installations and for both Residential and commercial application with the ability of 24 hours / day operation. The units are factory tested and on site Installation will be completed only by connecting with the water and power supply. The range is made of 9 models cooling only and heat pumps.
Product features: 1. High efficiency and environment protection. 2.World famous brand compressor are adopted ( copeland , hitachi, sanyo ), eer up to 5.0, reduce co2 emission to protect earth. 3.Top quality parts are used, compressor, sanhua 4-way valve, emerson valve. 4.Multiple protection function: high pressure, low pressure, overheating, overload anti-freezing, phase sequence, discharge temperature, suction temperature and so on. 5.Cooling only or cooling and heating for optional. 6. Heat recovery function for optional. 7. Wide range for application.
Non-Sterile Medical Examination Nitrile Gloves Powder free & Latex free 100% Virgin raw materials with FDA certificate & as per ASTM D6319/ CE EN 455 Quality standard: ASTM D6319, with 510K and FDA, CE/EN455, Color: Blue, white Finger Tips: textured Cuff: Beaded Pcs per Box for S/M/L/XL : 100pcs/box Origin: China, Vietnam, Thailand, Malaysia Benefits Protection from unwanted and harmful substances Beaded Cuff ensures easy donning and prevent roll down Superior Strength with better Puncture resistance Finger Tip Textured enhances wet and dry grip Thinner Guage improves tactile senstivity Custom Design enhances comfort and fit Provide an Alternate Solution for individual who are allergic to natural rubber latex Material : Synthetic Nitrile Type : Non-Sterile Powder Free, Amibidextrous, Finger Tip Textured, beaded cuff. Storage: Store in a dry and cool place, the temperature not higher than 38�° C Shelf life: 2 years Physical Properties Tensile Strength: Before Aging 14Mpa min Tensile Strength: After Aging 14Mpa min Elongation at Break (%): Before aging 500% min Elongation at Break (%): After aging 400% min Length: 230 mm in XS, S, M, L, XL Width: 70+/- 10 (XS) Width: 80+/- 10 (S) Width: 95+/- 10 (M) Width: 110+/- 10 (L) Width: 120+/- 10 (XL) Thickness Single wall ( mm): Fingers 0.050mm min Thickness Single wall ( mm): Palm 0.050mm min
Product features: 1. High effciency and enviroment protection. 2.World famous brand compressor are adopted ( copeland , hitachi, sanyo ), eer up to 5.0, reduce co2 emission to protect earth. 3.Top quality parts are used, compressor, sanhua 4-way valva, emerson vave. 4.Multiple protection function: high pressure, low pressur, overheating, overload anti-freezing, phase sequence, discharge temperature, suction temperature and so on. 5.Cooling only or cooling and heating for optional. 6. Heat recoverry function for optional. 7. Wide range for application. Technical parameter: Unitsdbt-25kw Heating capacitykw26 Heating power inputkw4.1*2 Starting currenta37*2 Copw/w3.15 Cooling capacitykw25.00 Cool power inputkw4.1*2 Operating currenta6.3*2 Eepw/w3.05 Operating currenta6.3*2 Starting currenta29*2 Working ambient temp ?c-7-45 Power supply v/ph/hz380/3/50-60 Compressortypescroll Refrigerant typer22/r407c/r407c/r410a Lengthmm1420 Widthmm750 Heightmm1070 Net /gross weight kg260/300 United noise level db (a)58 Certification cb, ce, emc, rohs, saso, ccc
Bwc air cooled water chiller Features Simplicity of installation:integrated hydraulic kit Low sound level Electronic regulation by microprocessor Composition Casing:steel board, high resistance to corrosion Compressor:hermetic scroll with themal protection, sound-proof enclosure, internal thermal protection of motor, crank-case heater Heat exchanger/condenser:water heat exchanger with tube in tube or brazed plate , copper/aluminum corrugate condenser Fan Cooling circuit Regulation by chiller microprocessor Regulation of water temperature Monitoring of operation parameters Short circuit protection Defrost of air heat exchange Anti-frozen protection(water heat exchange) Digital display showing Water temperature Set point The alarm code(high pressure, low pressure, water flow rate, sensors, anti-freeze, etc) Regulation of condensation pressure. Hydraulic module Refrigerant:r22, r407c, r410a Carton/plybox
PRODUCT NAME: Air-cooled Industrial Water Chiller MODEL NO.: AMC-3A AMC-5A AMC-8A AMC-10A AMC-12A AMC-15A AMC-20A AMC-25A AMC-30A Aumax® is a famous supplier of Water Cooling Tower, Air-cooled Water Chiller, Water-cooled Water Chiller, Industrial Water Chiller, Mold Temperature Controller, Screw-compressor Water Chiller etc. Welcome to contact us to know more. Note 1The cooling capacity is measured when the outgoing water temperature is 12°C and ambient temperature is 30°C. 2) The standard power supply is 3Ã?, 380V, 50HZ. Other power supply is available. Application: AMC-A Series air cooled industrial chiller are used to provide chilled water to cool injection mould, so that speed up the product molding process and shorten molding cycle time, also improved the product quality. The machine can also be used to cool the hydraulic oil of injection molding machine. AMC-A Series water chillers not only can be used in plastic molding industry, they are also applied to electroplating, electronic, textile, machine tools, etc. Aumax® Manufacturing Air-cooled Water Chiller, Air-cooled Industrial Water Chiller with high quality, used to provide chilled water to cool injection mold. They are applied to electroplating, electronic, textile, machine tools, etc. Features: Global top brand compressor, water pump, fans and electric parts, high performance and low power consumption. Optimized heater exchanger provide high cooling efficient. Stainless steel water tank and pipe keeps water in good quality. High precise PLC and temperature controller control temperature deviation less than ±1??. Overload protector to protect water pump, compressor and air fans. Fixed with wheels, easy to move.
High-efficiency Compressed Air Condenser (water-cooling) Inlet pressure: 0.2~1.0Mpa Inlet temperature: 140 celsius degree Outlet temperature: 45 celsius degree Cooling water inlet temperature: 32 celsius degree Cooling water inlet pressure: 0.2~0.4Mpa
S&A air cooled chiller CW-5200 for cnc vertical machine center S&A CW-5200 air cooled chiller developed and produced by S&A company of China it is suitable to cool cnc vertical machine center. Its cooling capacity up to 1.4KW and the thermoelectric control in ±0.3? precision and temperature control range in 5-35?. S&A chiller has passed CE,RoHS and REACH approval. Since January 2016, the warranty period of S&A chiller has extended to 2 years. CW-5200 water cooler parameter: Model CW-5200AG CW-5200BG CW-5200DG CW-5200TG CW-5200AH CW-5200AI CW-5200BI CW-5200DI Voltage 220V 220V 110V 220V 220V 220V 220V 110V Frequency 50Hz 60Hz 60Hz 50/60Hz 50Hz 50Hz 60Hz 60Hz Current 2.4~3.1A 2.6~3.3A 4.5~6.5A 2.4~3.3A 2.4~3.1A 2.4~3.1A 2.6~3.3A 4.5~6.5A Compressor power 0.52KW 0.5KW 0.68KW 0.49/0.57KW 0.52KW 0.52KW 0.5KW 0.68KW 0.71HP 0.68HP 0.93HP 0.66/0.77HP 0.71HP 0.71HP 0.68HP 0.93HP Refrigeration capacity 5084Btu/h 4982Btu/h 5186Btu/h 4825/5797Btu/h 5084Btu/h 5084Btu/h 4982Btu/h 5186Btu/h 1.49KW 1.46KW 1.56KW 1.41/1.70KW 1.49KW 1.49KW 1.46KW 1.56KW 1281Kcal/h 1256Kcal/h 1307Kcal/h 1219/1465Kcal/h 1281Kcal/h 1281Kcal/h 1256Kcal/h 1307Kcal/h Refrigerant R-22 / R-134a / R-410a Refrigerant charge 360g 380g 350g 360/380g 360g 360g 380g 350g Precision ±0.3? Reducer Capillary Protection Overcurrent protection for compressor, flow alarm, over temperature alarm Pump power 0.03KW 0.05KW 0.1KW Tank capacity 6L Inlet and outlet External F10mm brass connector F10mm speedy connector Max. lift 10 M 12M 25M Max. flow 10 L/min 13L/min 16 L/min N.W 26 Kgs G.W 29 Kgs Dimension 58 X 29 X 47 cm (L X W X H) Package dimension 70 X 43 X 58 cm (L X W X H) CONTACT S&A TEL:+86-20-89301885, FAX:+86-20-84309967 SKYPE: teyuchiller Email:marketing@teyu.com.cn Website: http://www.teyuchiller.com About S&A Brand S&A produces more than 60000 units of industrial chillers by year,we always insist on”Quality First” in design and production. “S&A” and “TEYU” have been enjoying high reputation among hundreds of manufacturers which are from both at home and abroad,and export rate reaches above 60%. -
Recirculating water chiller CW-5000 is designed, developed and produced by Guangzhou Teyu Electromechanical Co., Ltd (also known as S&A), a professional Chinese manufacturer of industrial water chillers with 16-year experience. The production plant of S&A covers an area of 18,000 square meters, enabling the annual production capacity of 60,000 units of water chillers. S&A air cooled chiller CW-5000 is very popular among European countries and North America with the annual sales amount of 30,000 units due to its compact design, stable cooling performance, long working life and ease of use. S&A water chiller CW-5000 features the cooling capacity of 800W and the precise temperature control of±0.3â?? with the temperature control range of 5-35â??. It has been widely applied in cooling CNC spindle, CO2 laser, welding machine and so on. It has 2 temperature control modes as constant temperature control mode and intelligent control mode which can meet different needs of different users. Under intelligent control mode, the water temperature of CW-5000 water chiller will be self adjusted according to the ambient temperature, really setting usersâ?? hands free. S&A air cooled chiller CW-5000 has multiple alarm functions, including compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm. S&A chillers have passed ISO, CE,RoHS and REACH approvals and the warranty is 2 years. CW-5000 video: https://www.teyuchiller.com/Article/02SAwaterchillerCW5000_1.html CW-5000 water chiller parameter: Voltage:110V-220V; Frequency: 50/60Hz; Refrigerant: R-134a Pump power: 0.03KW/0.051KW/0.1KW; Tank capacity:6L Max. lift:10M-25M; Max. flow: 10L/min- 16L/min N.W: 24Kgs; G.W: 27Kgs; Dimension : 58 X 29 X 47 cm (L X W X H); Packing dimension: 70 X 43 X 58 cm (L X W X H) About S&A Brand S&A(TEYU) was founded in 2002. After 16 years of developing and producing industrial water chillers, the headquarter covers an area of 18,000 square meters, and has about 250 employees. Why choose S&A Product Advantages: 1. With 11 patent certificatesï¼?CE, RoHS and REACH approval; Conforms to air transport requirements; 2 years warranty 2.±0.1â?? high precision temperature control, stable cooling performance, support ModBus-485 communication; 3. Establish logistic warehouses at USA and Europe; Manufacturing Advantages: 1.Independent R&D on sheet metal, evaporator, condenser and cores parts of chiller; 2. Annual output 60,000 units, product exports rate above 60%ï¼? 3. Standard bulk production, standard parts rate up to 80% ï¼? 4. With excellent laboratory testing system, simulates actual working environment for chiller. CONTACT S&A SKYPE: teyuchiller ; Email:marketing@teyu.com.cn; Website: https://www.teyuchiller.com TEL:+86-20-89301885; FAX:+86-20-84309967
Mychef Bakershop Air-s
Air cooled invert packaged water chillers The packaged inverter chiller units adopt inverter technology to improve the room environment greatly. Compare with the traditional chillers, packaged inverter chiller system can keep the indoor air temperature more stably in a set temperature by control the compressor speed to adjust the cooling output of the indoor Unit, at the same time, it is more energy saving. At startup, full power is used to achieve the room temperature setting quickly. Then, the capacity is adjusted according to the outdoor temperature changes and subtle indoor load changes to achieve fine-control of the room temperature setting. For cassette type indoor unit, there are total 6 versions: Heat pump bhlrcf 8z-10z-14z-17z Cooling only Bhlcf 8z-10z-14z-17z
Desulphurisation Slag is an iron slag derived from the desulphurisation skimming process. This material is an iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si), but has a stable chemistry with 75 -80% chemistry. The level of Fe% in the slag has been estimated by water displacement test. This material con offer competitive advantages respect other metal scraps: Price; Stable Chemistry; The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.
We are proposing about 1000 1200 Mt/ton monthly of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag : 1. >85% Fe Average 600mm Max Fraction 2. >78% Fe Average 20-300mm Fraction The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact
