ZZC Series Rotor Powder Feeding System ZZC series rotor powder feeding system is the measuring equipment, developed and applied for powder feeding, on the basis of absorbing foreign advanced powder feeding technology. It is widely used for measuring and control of coal ash, fly ash, limestone, carbide slag and alumina, etc. 1. ZZC Series Rotor Powder Feeding System composition: 1.1 Spiral gate valve; 1.2 Pre-feeder (FRC powder feeder, star shape feeder, screw feeder, a set of valves); 1.3 ZZC rotor scale; 1.4 Flexible connection; 1.5 Control system, etc. 2. Rotor Scale's Structure and Principle: The rotor scale weighs material weight by using balance structure. Motor, impeller rotor and disc compose the balance body, weighing blade supports on the frame, entrance and exit use flexible connections, do not affect the balance body bearing stress and turning, and ensure the body balanced on both sides when designing. Due to the rotating impeller, the material flows uniformly within half a circumference from entrance to exit in the process of powder supply. The load cell can accurately measure the weight of the powder on the semi-circle. Weight signal and impeller speed signal calculated within the microcomputer and then get flow rate signal. After comparing with the setting value, the controlled variable will be passed to the frequency conversion motor (including the pre-feeder frequency conversion motor). Adjusting the speed of rotor scale and pre-feeder can adjust the powder flow rate.
ZZC Series Rotor Powder Feeding System ZZC series rotor powder feeding system is the measuring equipment, developed and applied for powder feeding, on the basis of absorbing foreign advanced powder feeding technology. It is widely used for measuring and control of coal ash, fly ash, limestone, carbide slag and alumina, etc. 1. ZZC Series Rotor Powder Feeding System composition: 1.1 Spiral gate valve; 1.2 Pre-feeder (FRC powder feeder, star shape feeder, screw feeder, a set of valves); 1.3 ZZC rotor scale; 1.4 Flexible connection; 1.5 Control system, etc. 2. Rotor Scale's Structure and Principle: The rotor scale weighs material weight by using balance structure. Motor, impeller rotor and disc compose the balance body, weighing blade supports on the frame, entrance and exit use flexible connections, do not affect the balance body bearing stress and turning, and ensure the body balanced on both sides when designing. Due to the rotating impeller, the material flows uniformly within half a circumference from entrance to exit in the process of powder supply. The load cell can accurately measure the weight of the powder on the semi-circle. Weight signal and impeller speed signal calculated within the microcomputer and then get flow rate signal. After comparing with the setting value, the controlled variable will be passed to the frequency conversion motor (including the pre-feeder frequency conversion motor). Adjusting the speed of rotor scale and pre-feeder can adjust the powder flow rate.
Product Specification Power Range : 1.0 HP to 2.0 HP Operating Speed : 0 - 3100 RPM DC Power Range : 900 Wp - 2000 Wp DC Voltage Range : 70 Vmp - 110 Vmp Head Range : 30 Mtr - 90 Mtr Discharge Range : 8000 LPD - 30000 LPD Type of Duty : S1 - Zero Running Cost - Less Maintenance - Eco-Friendly - Simple Installation - Pollution Free Material Of Construction - Motor Part Grade Mechanical Seal : Graphite Ceramic Motor Shaft : Stainless Steel Motor Body Pipe : SS-304 Lower Hosing : Aluminum Diaphragm : High Nitrile butyl rubber Top Cap : Stainless Steel Bottom Plate : Stainless Steel End Cap : Stainless Steel MATERIAL OF CONSTRUCTION SCREW (HELICAL) PUMP Part Grade Outlet : SS-304 Suction : SS-304 Outer Shell : SS-304 Rotor Screw : Stainless Steel Stator : Rubber Coated Alloy MATERIAL OF CONSTRUCTION â?? CENTRIFUGAL PUMP Part Grade Check valve housing : SS-304 Check valve : PC Suction : SS-304 Outer Shell : SS-304 Impeller : POM Bowl : PC Pump Bush : NBR Pump Sleeve : Stainless Steel Pump Shaft : Stainless Steel Coupling / Pump Couple : Stainless Steel
Salient Features Highly efficient 3-phase water filled motor - Easily rewindable - Dynamically balanced design - Extended life with flawless performance - Thrust bearing : Carbon + S.S. material for High thrust load capacity - 100% EC grade copper winding - Presenting world 1st design (design registered 100% fully S.S.-304 investment casting pumps. - Zero maintenance - Superior performance - Sand proof operation - Highly efficient 3-phase water filled motor Product Specification Power Range : 1.0 HP to 20.0 HP Operating Speed : 0 - 2890 RPM Operating Frequency : 0 - 50 Hz Input Solar DC Power Range : 900 Wp, 20000 Wp Input Solar DC Voltage Range : 110 Vmp - 600 Vmp Head Range : 30 Mtr , 220 Mtr Discharge Range : 10000 LPD - 420000 LPD Type of Duty : S1 material of construction - motor Part Grade Body Lock : Spring Steel Stud Ring : M.S. (Zinc Coated) Stator Stamping : CRNGO - M45 Silicon Winding Wire : 100% EC Copper Shaft : SS-420 Rotor Stamping : CRNGO - M45 Silicon Copper Lamination : 100% EC Copper Upper Housing : SS-304 Lower Housing : SS-304 Connection Piece : SS-304 Oil Seal : NBR TB Set : Carbon + SS Base : SS-304 Drain Plug : Brass Couple Sleeve : Stainless Steel Water Bolt : Brass MATERIAL OF CONSTRUCTION PUMP Part Grade Suction : SS-304 Couple : Stainless Steel Couple Counter : SS-304 Rubber Seal : NBR Bush Seal Cover : SS-304 Bowl : SS-304 Impeller : SS-304 Key : SS-410 Bowl Bush : NBR Bush : LTB-4 Middle : SS-304 Cap : NBR Outlet : SS-304
Monoblock pumps - Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. salient features - High operating efficiency resulting in lower power consumption - Good suction lift characteristics - Inbuilt thermal overload protector in al single phase pumpsets upto 2.0 HP - Specially designed for wide voltage operation - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life - Back pull-out design for easy servicing and repair - Double shielded ball bearings, so no need of external lubrication - All Model fitted to Mechanical seal. specification - Power Range : 0.37Kw - 1.5 Kw (0.5 HP - 2.0 HP) - Version : Single Phase, 220-240V, 50Hz AC Supply Three Phase, 380-415V, 50Hz AC Supply - Speed : 2880 RPM - Maximum Total Head : 32 Mtr. - Maximum Flow Rate : 940 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Mechanical Seal - Type of Duty : S1 (Continuous) - Method of Starting : Permanent Split Capacitor (PSC) - Direction of Rotation : Three Phase, Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 25 X 25, 32 X 25, 40 X 32, 40 X 40, 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80 (All size in mm) characteristics of clear cold water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 Part Name Material Mechanical Seal : Carbon & Ceramic Motor Shaft : EN-8 Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Plastic
Monoblock Pumps Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. salient features High operating efficiency resulting in lower power consumption - Good suction lift characteristics - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. - Mechanical seal is provided as per customers requirement Specification - Power Range : 2.2 Kw - 11.2 Kw (3.0 HP - 15.0 HP) - Version : Three Phase, 380-415V, 50Hz AC Supply - Speed : 2880 RPM - Maximum Total Head : 65 Mtr. - Maximum Flow Rate : 1450 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Stuffing Box - Type of Duty : S1 (Continuous) - Direction of Rotation : Three Phase, Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80 100 X 80 and 100 X 100 (All size in mm) Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 mÃ?/sec (max.) - Ph Value : 6.5 to 8.5 Material of construction - motor Part Name Material Gland Dori : Graphite String Motor Shaft : EN-19 with SS SLEEVE Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Aluminium
Falcon regenerative monoset pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. Salient Features High operating efficiency resulting in lower power consumption. - Good suction lift characteristics. - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. - All Model fitted to Mechanical seal. specification Power Range : 0.37 Kw - 0.75 Kw (0.5 HP - 1.0 HP) - Version : Single Phase, 220-240V, 50Hz AC Supply - Speed : 1440 RPM - Maximum Total Head : 18 Mtr. - Maximum Flow Rate : 4200 LPH - Maximum Suction Lift : 8 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Mechanical Seal - Type of Duty : S1 (Continuous) - Direction of Rotation : Single Phase, Clockwise from driving end - Nominal Pumpset Size (Suction X Delivery) : 25mm X 25mm Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 material Of construction - Motor Part Name Material Mechanical Seal : Carbon & Ceramic Motor Shaft : SS-410 Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : Brass Cooling Fan : Plastic
Monoblock pumps Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. Salient Features High operating efficiency resulting in lower power consumption. - Good suction lift characteristics. - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. specification - Power Range : 1.5 Kw - 5.5 Kw (2.0 HP - 7.5 HP) - Version : Three Phase, 380-415V, 50Hz AC Supply - Speed : 1440 RPM - Maximum Total Head : 12 Mtr. - Maximum Flow Rate : 3160 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Stuffing Box - Type of Duty : S1 (Continuous) - Direction of Rotation : Three Phase - Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 80 X 80, 100 X 100, 125 X 125, 150 X 150 (All size in mm) Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 Part Name Material Gland Dori : Graphite String Motor Shaft : EN-19 with SS SLEEVE Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Aluminum
Professional; improving; cooperation; win-win: these are our philosophy. We believe quality is the life of company and honesty is the basic rule of market. We will try our best to offer satisfying service. And welcome your cooperation. All size you want
Open end spinning is also known as rotor spinning or break spinning. Open end spinning works not by a spindle but by the principles of centrifugal force: fibers are fed into a rotating turbine. Our Offers are for weaving & Knitting in unwaxed or waxed form The actual resultant count can be customised
Rotor Scrap Shredder Machine Metal Crusher Machine For Sale  It is scientifically designed and reasonably configured following customized schemes on customersfield ,output,material types and so on.It is high in automation; Monitored by computer,PLC control,safe,high-efficient,conservation of labor; Over 90% are produced by the component;quality materials are used for key components;it has exquisite techniques that are more solid and durable; All-out environmental supporting facilities on shock absorption,noise reduction and dust removal help bring down second-time pollution Remote diagnosis24 hours of uninterrupted after-sale service.
Polyester Open end spinning is also known as rotor spinning or break spinning. Open end spinning works not by a spindle but by the principles of centrifugal force: fibers are fed into a rotating turbine. We can offer in virgin open end and recycle polyester yarns ,also in blends of virgin or recycle polyester open end yarns blended with cotton such that we have chief side as polyester or cotton as per the requirement suitable for weaving & Knitting. Customisation for actual resultant count , IPI, CSP possible on demand to be made suitable for Airjet looms as well.
Moulded Rotor
Product name : Custom Super Strong permanent N54 Neodymium Arc Magnets for PM motor Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available) Direction of magnetisation : Through the thickness or through the diameter Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on. Grade : 45M,38H,N40SH,N33UH,N35EH Tolerance in size : +/-0.1 mm
Product name : rotor magnet,Custom Super Strong permanent 35UH Neodymium Arc Magnets for PM motor Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available) Direction of magnetisation : Through the thickness or through the diameter Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on. Grade : N35SH,N45SH,N30UH,N38EH Tolerance in size : +/-0.1 mm
Balancing speed(r/mm): 300-5000 Min achievable residual unbalance(g.Mm/kg): =90 Drive powder(kw): 1.5 Plywood box
High speed highcapacity bench top Medical Laboratory Centrifuge Machine Microprocessor based Heavy duty CRC construction finished with powder coating Noiseless Operation Programmable RPM selection 500 to 6000 in intervals of 100 rpm Digital timer 0120 minutes The machine is fitted with a wellbalanced brushless motor with an electronic drive The Electronic lid lock does not allow the lid to be opened when the machine is running The motor is fitted with rpm sensor to monitor the rpm of the machine The controller monitors the rpm of the machine and does not allow the motor to overspeed The Machine has safety features for the detection of Imbalance and stops automatically Warranty 3 years from the date of installation 4 lines 20 characters Jumbo LCD Display for set time run time set and run RPM RCF 50 programs can be stored in memory Programmable Acceleration Time 40200 Sec and Deceleration Time 40200 Sec with advanced Coast Feature condition and opens automatically after centrifuge rotor stops Dynamic brake automatic Fast spin option Delta Industrial Automation VFD and SMPS Make in India The machine can run fixed angle rotors swingout rotors well plate rotors microtube rotors Stainless Steel 304grade rustfree centrifugal bowl for extra protection and easy cleanin Userfriendly control panel
-Ferrite Magnet -Multipole ring Magnet -Motor Magnet -NeFd Magnet -Y30, 32 Magnet -Impeller
Rotor 8600
Rotor 5314
