Find Verified Rotary Dip Switch Suppliers, Manufacturers and Wholesalers

Rotary DIP Switch
Specifications of Rotary type: 10pos, 16pos ,hexadecimal, decimal, BCD.
ELECTRICAL SPECIFICATIONS
Operating voltage: 24VDC Max.
Contact load,static: 400mA Max.
Contact load,dynamic: 150mA Max.
Initial contact resistance: 80mª+ Max.
Insulation resistance: 100mª+ Min.

Solder recommendations

Hand Soldering:340 degree Max. for 2 seconds Max.
Wave Soldering:260degree. Max. for 10 seconds Max.

PACKING
Switches are packed in standard IC Tube Package,47 pcs per tube,and the accessories are bags.

MECHANICAL DATA
Expected life: 10,000 steps
Position per rotation: 10, 16
Operating temperature: -20degree to 70degree

MATERIALS
BASE: Engineering plastics,Black.

COVER: Engineering plastics,Black.
Actuator: Engineering plastics
Contacts: Alloy copper,Gold over nickel plated

TERMINAL: Alloy copper,Tin plated
Our company manufacturer has developed itself of the designing, production and development of cabling products on logical network.

1. Slide type (DS series): 2pos, 3pos, 4pos, 5pos, 6pos, 7pos, 8pos, 9pos, 10pos, 12pos.
2. Piano type(DP series): 2pos,3pos,4pos,5pos,6pos,7pos,8pos,10pos,12pos.
3. Right angle type(DS series): 2pos,3pos,4pos,5pos,6pos,7pos,8pos,9pos,10pos,12pos.
4. IC type(DP series): 2pos,3pos,4pos,5pos,6pos,7pos,8pos,10pos,12pos.
5. SMT type(SMD series): 2pos,3pos,4pos,5pos,6pos,7pos,8pos,10pos,12pos.
6. Rotary type: hexadecimal,decimal,BCD.

Packing

All DIP switches are packed in standard IC tube.
SMT type can be packed in Tape or Reel packing.

DIP Switch

Plastic Moulded Switches

Electric panel meters and its equipment on demand

MCC Electrical Panel Supply

Piano type switch
Specifications of piano type switch
2pos, 3pos, 4pos, 5pos, 6pos, 7pos, 8pos, 10pos, 12pos.
Mechanical
1.Operation force: 800g max
2.Stroke: 2.00mm
3.Operation temp: -20degree~70degree
4.Storage temp: -40degree to 85degree

Materials
1.Base: engineering plastics, black.
2.Cover: engineering plastics, red or blue.
3.Button: engineering plastics, white.
4.Terminal: alloy copper, gold plating.

Electrical
1.Electrical life: 2000 operations cycles per switch.
2.Non-switching rating: 100ma, 50vdc
3.Switching rating: 25ma, 24vdc
4.Contact resistance: 50mª+ max, at initial;100mª+ max, after life test.
5.Insulation resistance: 100mª+, 500vdc
6.Dielectric serength: 500vcd/1 minute
7.Capacitance: 5pf max.
8.Circuit: single pole single throw.

Soldering and cleaning processes
1.Keep all switch contacts in their "off" position for all operation .
2.Wave soldering: recommended solder temperature at 260degree max.5 seconds for ic type.
3.Hand soldering: use a soldering iron of 30 watts, controlled at 320degree approximately 2 seconds, while applying solder.
4.Reflow soldering: reflow zone 240degree for 20 seconds.(for smt type, see the picture)
5.Cleaning process: flux clean using force rinse, high agitation or triple bath cleaning mathod.
Freon tf or te give excellent results.When vapor methods are used do not subject the switch to solvents at temperature above 51degree.




Packing
All dip switches are packed in standard ic tube.

Slide type switch

Specifications of Slide type switch:
2pos,3pos,4pos,5pos,6pos,7pos,8pos,9pos,10pos,12pos.

MECHANICAL
1.Operation Force: 800g Max
2.Stroke: 2.00mm
3.Operation temp: -20degree~70degree
4.Storage Temp: -40degree to 85degree

MATERIALS
1.BASE: Engineering plastics,Black.
2.COVER: Engineering plastics,Red or blue.
3.BUTTON: Engineering plastics,White.
4.TERMINAL: Alloy copper,Gold plating.

ELECTRICAL
1.Electrical Life: 2000 operations cycles per switch.
2.Non-Switching Rating: 100mA,50VDC
3.Switching Rating: 25mA,24VDC
4.Contact Resistance: 50mª+ Max,at initial;100mª+ Max,after life test.
5.Insulation Resistance: 100mª+,500VDC
6.Dielectric Serength: 500VCD/1 minute
7.Capacitance: 5pF Max.
8.Circuit: Single pole single throw.

SOLDERING AND CLEANING PROCESSES
1.Keep all switch contacts in their "OFF" position for all operation .
2.Wave Soldering: Recommended Solder Temperature at 260degree Max.5 seconds for IC type.
3.Hand Soldering: Use a soldering iron of 30 watts, controlled at 320degree approximately 2 seconds,while applying solder.
4.Reflow Soldering: Reflow zone 240degree for 20 seconds.(for SMT type,see the picture)
5.Cleaning Process: Flux clean using force rinse,high agitation or triple bath cleaning mathod.
Freon TF or TE give excellent results.When vapor methods are used do not subject the switch to solvents at temperature above 51degree.
PACKING
Our company manufacturer has developed itself of the designing, production and development of cabling products on logical network.



All DIP switches are packed in standard IC tube.

Right-angle type switch
Specifications of Right angle type(DS series):
2pos,3pos,4pos,5pos,6pos,7pos,8pos,9pos,10pos,12pos.

Mechanical

1.Operation Force: 800g Max
2.Stroke: 2.00mm
3.Operation temp: -20degree~70degree
4.Storage Temp: -40degree to 85degree

Materials

1.BASE: Engineering plastics,Black.
2.COVER: Engineering plastics,Red or blue.
3.BUTTON: Engineering plastics,White.
4.TERMINAL: Alloy copper,Gold plating.

ELECTRICAL
1.Electrical Life: 2000 operations cycles per switch.
2.Non-Switching Rating: 100mA,50VDC
3.Switching Rating: 25mA,24VDC
4.Contact Resistance: 50mª+ Max,at initial;100mª+ Max,after life test.
5.Insulation Resistance: 100mª+,500VDC
6.Dielectric Serength: 500VCD/1 minute
7.Capacitance: 5pF Max.
8.Circuit: Single pole single throw.

SOLDERING AND CLEANING PROCESSES
1.Keep all switch contacts in their "OFF" position for all operation .
2.Wave Soldering: Recommended Solder Temperature at 260degree Max.5 seconds for IC type.
3.Hand Soldering: Use a soldering iron of 30 watts, controlled at 320degree approximately 2 seconds,while applying solder.
4.Reflow Soldering: Reflow zone 240degree for 20 seconds.(for SMT type,see the picture)
5.Cleaning Process: Flux clean using force rinse,high agitation or triple bath cleaning mathod.
Freon TF or TE give excellent results.When vapor methods are used do not subject the switch



All DIP switches are packed in standard IC tube.

Panel Boards

Cat5e patch panel

Rotary switch.

Material: Q195 Q235 45# 60# 65# 70# 80# 82B carbon steel
Model Number: 0.3-13mm
Standard: AISI,ASTM,BS,DIN,GB,JIS
Steel Grade: Q195 Q235 45# 60# 65# 70# 80# 82B carbon steel
Place of Origin: India and China

Rotary Switch

Food rotary mixing machine
Food processing: Automatic lifting material --automatic rotary mixing
Seasoning and mixing: sauce (chili sauce, jam), pickled vegetables (radish strips, salted fish), meat (braised beef, chicken legs) coating powder, seasoning 13.
Granules and powder: snack mixes such as crisps, potato chips, shrimp chips, and raw materials of cereals and Babao Congee.
Special requirement: Non damaging stirring for fragile ingredients such as bean curd and cereal.
Expanding industries:
Compatible with dry powder or granule mixing in industries such as pharmaceuticals, feed, and chemicals, but attention should be paid to equipment materials and cleanliness
Capacity 50-100kg ,big capacity need customized .

AC250V 16A T150 1E4.
Size: 30cmx35cmx35cm
Quantity: 300 only
Weight: 20KG.

AC250V 16A T150 1E4.

Size: 30cmx35cmx35cm
Quantity: 300 only
Weight: 20KG.