Metallic Ring Joint Gaskets are suitable for high pressure and high temperature applications. The Joint Gaskets are available in R, RX, BX styles and in oval/octagonal profiles.These are manufacturered in accordance with specific tolerances on CNC machines. Ring Joint Gaskets fully comply with the ASME B16.20 standard and the API spec 6A requirements (where applicable). Ring Joint Gaskets are as per API- 6A. The units are manufactured in a variety of standard and special materials For price and specification please contact us
AIGI 30 A solid metal gasket that is softer than the mating flange material that is virtually 'crushed' into the flange face, creating a seal by filling imperfections and leak paths with gasket material. Under high sealing stress the gasket deforms but not the flange. They are used predominantly in the petrochemical industry (offshore oil platforms, refineries) due to the high service pressures required in their processes. Ring joint gaskets are machined to exact specifications and tight tolerances and come in a number of styles. Hardness of Materials On compression of the flange assembly, it is imperative that the ring joint gasket be significantly softer than the flange groove so that the gasket plastically deforms and not the groove. The use of harder ring joint gaskets can result in flange groove damage. For this reason, ring joint gaskets are supplied with the following maximum hardness values: Certified at API 6A-1069
Ring joint gasket/ metal gasket [technical parameter] Types of gasket: serrated, octagonal, elliptic, lens-shaped Materials: carbon steel, ocr13, 1cr18ni9, 304, 316 Temperature: -100-80 Pressure: 35mpa [main uses] for static sealing in flange joint of high pressure pipeline, container, equipment and etc. [specification] dn10-800mm.
Ring joint gasket/ metal gasket [technical parameter] Types of gasket: serrated, octagonal, elliptic, lens-shaped Materials: carbon steel, ocr13, 1cr18ni9, 304, 316 Temperature: -100-80 Pressure: 35mpa [main uses] for static sealing in flange joint of high pressure pipeline, container, equipment and etc. [specification] dn10-800mm Wooded box
Description: WFY RJ3300is machined from solid metal in a variety of shapes and designed for high pressure, high temperature or highly corrosive applications by selecting the most suitable material and shape. It is designed to withstand exceptionally high assembly loads over a small area, thus producing high seating stresses.
Ring joint gasket Got-450 ring joint gasket chooses solid metal with kinds of materials, and is mechanically cut and processed into metal sealing gaskets with kinds of forms by high precision nc lathe. It is suitable for the sealing part of pressure container, valve, and cylinder head with high temperature, high pressure, and strong corrosion. General characteristic is installation area small and preload pressure high. Metal flat gasket Metal elliptic gasket Metal aniseed gasket Rx type metal gasket Bx type metal gasket Special-shaped metal gasket
Product Description 1. The Ring Joint Gasket Type: BX, RX, R(Oval & Octagonal), the Ring Joint Gasket is mainly used in high-pressure, and temperature applications in the petroleum industry. Mostly used for Valves, Pipes and Flanges. 2. Standard R types are in accordance with API 6A and ASME B 16.2 size. For both Oval and Octagonal configurations. They can interchange on the modern octagonal-type groove flange. 3. RX Type ring joint gaskets are manufactured to fit the API 6B flange"s groove, interchangeable with R(oval) and R(octagonal) series, bear pressure can reach 15000 PSI, so these gaskets performance excellent in 6B flange, suitable to the higher pressures with higher vibrations and heavier weights of these units. Spec.: RX20~RX215 4. BX-type ring joint gaskets are designed for BX flange grooves only, it is suitable for higher-pressure ratings starting at 2, 000 lbs and ending with 20, 000 lbs, incorporate a pressure balance hole to ensure equalization of pressure which may get trapped in the grooves. 5. The Ring Joint Gasket materials: Carbon Steel, Soft Iron, SS304, F5, 321, 304L, 316L, 316, 347. Or other materials according to your request.
Ring joint gaskets are for oilfield and process industry duties. > oval shape gasket is belong to api 6a r series > these gaskets are used in pressures up to 10, 000 psi. > the oval type is the only gasket that will fit a bottom radiused groove. > gaskets and not re-used after torque. Customized is available
Ring Joint gaskets are developed for use in the petroleum industry.Ring Joint gaskets are widely used between pipeline flanges, valves and pressure vessels in the Oil & Gas industry. High operating pressure up to 1378 bar when applied in API 6B.Corrosion and chemical resistance are depending on the selected RTJ gasket material.
We are the largest Ring Joint Gasket Manufacturer in Asia. At Asian Sealing Products, we manufacture 14 types of ring type joint gaskets with highest quality and we will ensure that the gaskets are delivered to the customers on time.
We are the largest Ring Joint Gasket Manufacturer in Asia. At Asian Sealing Products, we manufacture 14 types of ring type joint gaskets with highest quality and we will ensure that the gaskets are delivered to the customers on time.
Ring Joint Gaskets BX and SBX Type Ring Joint Gaskets can also be manufactured as a blind profile Ring Joint Gaskets Rubber Coated Rubber coated oval/octagon Ring Joint Gaskets (usually steel) are used in pressure testing to minimise damages to flanges Rubber contact points provide additional seals while protecting the flange surfaces
Ring Joint Gaskets RX Type An adaptation of the standard ‘r’ type gasket Designed to fit the same groove design Interchangeable with standard r type gaskets Available from rX20 to rX215
Ring Joint Gaskets Oval and Octagonal Oval cross-section Industry Ring Joint Gaskets and Octagonal cross section Ring Joint Gaskets are used in pressures up to 10,000 psi The hardness of the ring gasket should always be 30% lesser than the hardness of the flanges to prevent flange deformation Dimensions and Tolerances for Ring Joint Gaskets and Grooves are covered in API 6A and ASME B16.20. We stock a wide range of sizes and materials ready for immediate shipment from Ring Numbers R11 to R105.
We are the largest Ring Joint Gasket Manufacturer in Asia. At Asian Sealing Products, we manufacture 14 types of ring type joint gaskets with highest quality and we will ensure that the gaskets are delivered to the customers on time.
Ring joint metallic gasket Metal ring gasket is by smithing, heat treatment and mechanical processing. It is suitable for oil or gas pipe flange, pressure vessel, high speed joint face, valve with high temperature and high pressure. It has good sealing performance even when the pressure and temperature is not stable.The typical style r are divided into ellipse style and octagonal style according to its cross section. The standard style r gasket is made conform to the api 6a & asme b16, 20 standard, can bear 10000psi pressure at most. The octagonal style and ellipse style can be interchanged in flange with trapezum groove. Style rx is an improvement of style r in pressure resistant. It is a standard ring gasket suitable for all the flange sealing which is suitable for style r. Style by is another item with a high pressure resistant up to 15000psi. We have some different material and style which can correspond to different design and operation demand please see the following table for the reference of material characteristic. 56sheets/packing
The metal ring joint gasket is made of metal material by forging and heat treatment and machining . The rings come in three different kinds of metal.
Pictures of API 6A RX24 ring joint gasket: Parameters of API 6A RX24 ring joint gasket:Item No: API 6b flanges RX gasketsSize: 105.9782.1525.46.45Net weight: 0.62KGShape: Octagonal Ring GasketTemperature: -150°C--800°CCertificate: API6A, ISO9001:2000, TS SafetyPressure: 700 barStandard: ASME B16.20 HG20612 HG20633Application: Pipe flanges and valve bonnets high pressure steam, gas, hot oil, oil gas, sol-ventvanor, oxygen at high temperature in oil re-fineries, petrochemical plants, thermal power plants and steam turbined vessels.Warranty:1 year Features of API 6b flanges rx gaskets:1)Octagonal ring gasket is a kind of oil, water, steam, acid and alkali salt, hydrogen, nitrogen and other pipe flanges, valves, pressure vessels, submarine, high-speed joint surface, high temperature and high pressure valve cover and other pressure joint seal. 2)There are a variety of materials and types to suit different design and operating requirements, in full compliance with ANSI B16.20 regulations. Commonly used soft iron, 10 # steel, stainless steel oval and octagonal type, in the new flat-bottomed slotted flange can be used interchangeably, the company can supply within the shortest period. 3)Metal material: 304,304L,316,316L,321,310,340,347,H32750,Carbon Steel, Hastelloy B2,Titanium and so on. 4)Suitable medium: steam, hydrogen, water, natural gas, pyrolysis gas, oil, acid, alkali, salt solution. Application scope: In the petrochemical, petroleum, chemical, fertilizer, polysilicon, high temperature, high pressure, high corrosion, groove valve, flange, container and other interfaces sealed. 5)Note: The choice of metal ring material hardness should be lower than the flange 15 ~ 20 HB, and the old product is not recommended for repeated use, due to material may occur hardening and damage to the flange or sealing performance.6)Certification: ISO9001; CE; TS; API Pictures of our company: RFQ:1.If your company can accept sample order?Yes, we can accept sample for clients test quality before place order.2.Your main market?We sell the goods all over the world and main market including USA, North America, Italy, Mainland and so on.
Pictures of API 6A BX155 S304 ring joint gasket: Parameters of API 6A BX155 S304 ring joint gasket:Item No:BX155 Size: Ï?147.96145.95119.5214.2212.22Net weight:0.66 KGShape: Octagonal Ring GasketMaterial: SS304Temperature: -150°C--800°CCertificate: API6A,ISO9001:2000, TS SafetyPressure: :PN2.0(CLASS150)-PN42.0(CLASS2500)Standard:ASME B16.20 HG20612 HG20633Application: Petroleum Chemical industry, Oil refining, power generation, nuclear industry and so onWarranty:1 year Packaging Details: We packaged the goods with white box and I piece a boxAlso can custom designed the packaging as clients requirement.Pictures of our company: RFQ:1.Why Choose us?We are a manufacture which have several years experience in metal jacketed gaskets. With advanced technology and can offer the best quality with competitive price for clients.2.Where is your factory location?Chumen town, Yuhuan country, Zhejiang Province, China
The basic properties of selected materials Material Hardness(HB) Temperature(íµ) Soft iron 90 530 Carbon Steel 120 530 304(L)íó321íó316(L) 160 750 5Cr1/2Mo 130 500.
