Refrigeration Magnetic Check Valve Suppliers and Manufacturers

Ferrite Magnet is manufactured from oxide material by powder metallurgical process. Its advantages include: low-cost excellent corrosion resistance, resistance to be demagnetized etc. The normal working temperature of Ferrite Magnet is between-40C and +250C.It can be magnetized before or after assembling. Generally, Ferrite Magnet can be machined to regular shapes like segments, blocks, rings and discs etc. The normal grades for sintered Ferrite Magnets are Y10,TY25, Y30, Y30BH, Y35, etc. Advantages of Ferrite Magnet: Ferrites have isotropic characteristics, weak magnetic performance, has the same magnetic performance in any direction, multipolar magnetic charge. The main raw material of ferrite is oxides, so it is not corroded by high temperature, high humidity or chemicals (except strong acid and base); with excellent diamagnetic impedance, no flux loss before and after assembly and magnetic charging; working temperature is-40C to + 250C, poor temperature coefficient; Br temperature coefficient is-0.2% /C, 0.2% under Br, etc. per 1 Cincrease; high hardness, wire cutting and grinding; ferrite is brittle and fragile during production and transportation. magnetic requirements and good for strict working environment requirement.

Neodymium magnets (also known as NdFeB, Neo or NIB magnets), are strong permanent magnets made from an alloy of neodymium, iron & boron. Part of the Rare-Earth magnet family, they have the highest magnetic properties of all permanent magnets. Due to their high magnetic strength and relatively low-cost, they are the preferred choice for many consumers, commercial, industrial and technical applications.NdFeB is divided into sintered NdFeB and bonded NdFeB. Bonded NdFeB is magnetic in all directions and corrosion resistance and is divided into Bonded Compression NdFeB Magnet and Bonded Injection NdFeB Magnet; while sintered NdFeB is easy to corrosion, the surface requires coating, generally divided into axial and radial magnetic charging. Advantages of Sintered NdFeB Magnet : 1. Very hard and brittle, high diamagnetic resistance, high cost / performance ratio, not suitable for high working temper ature; 2. Magnetic performance is higher than that of the rare earth cobalt permanent magnet, the residual magnetic induction strength, magnetic induction coercivity, the maximum magnetic energy product is very high, is the current magnetic performance of the best permanent magnet; 3. High cost performance.

Samarium Cobalt (SmCo) magnets are made by a sintering process and exist in two forms. The first is Sm1Co5(SmCo 1:5),which has a maximum energy product of between 14 and 24MGOe. The second and more common form is Sm2Co17(SmCo 2:17) which has a maximum energy product of between 22 and 32 MGOe. The main Sm2Co17 alloy is around 35% Samarium (Sm)and 60% Cobalt (Co)with the balance being from varying amounts of lron (Fe) Copper (Cu). Hafnium (Hf) and Zirconium (Zr). Praseodymium (Pr) may also be used. Sm1Co5 is made of only Sm and Co and has excellent corrosion resistance. â?¢ Advantages of SmCo Magnet: 1.Superior resistance to high temperature. 2. Excellent resistance to corrosion, no coating is needed for surface protecting. 3.High working temperature. 4.SmCo is suitable for machines with high magnetic requirements and good for strict working environment requirement.

AINiCo is composed primarily of Aluminum Nickel Cobalt and also Copper and Titanium. They are manufactured through either casting or sintering process. Cast AINiCo may be manufactured in complex shapes such as horseshoes not possible with other magnet materials. Sintered AINiCo offer slightly lower magnetic properties but better mechanical characteristics. it can be efficiently magnetized in any direction, and for anisotropic AINiComagnet, it generally has greater magnetic capacitive in a preferred orientation than isotropic types. AINiCo is hard and brittle, Machining or drilling cannot therefore be accomplished by ordinary methods. Holes are usually cored in at the foundry, and magnets are cast close to final size and then finish machined to closer tolerances. â?¢ Advantages of AlNiCo Magnet: 1.Customized designs are available. 2.Max working temperature can be as high as 550�°C. 3.Disadvantage: Br and BH(max)are not as high as rare earth magnet. 4.High energies and relatively low coercivity. 5.High magnetic flux density; low mold charge stable temperature properties; easy to shap.

Flexible magnets are low-cost extruded permanent magnets made by bonding a strontium magnetic powder ina flexible vinyl binder. Microcrystalline magnetic powder of flexible magnet leads to its high magneticperformance, and artificial rubber makes it very flexible. Its maximum magnetic energy product has reached 90KJ/ m3 (11.25MGOe), industrial mass production magnetic performance range of 16 to 68KJ/m3(2.0~8.5MGOe).Due to its excellent flexibility, it can assemble faster than molded magnets. Flexible magnetic sheets, magnetic strips and labeling magnets are easy to use and manipulate to your desired specifications. Advantages of Flexible Magnet: Flexible magnets are easy to use, easy to manipulate, low cost and extremely versatile. They can easily be cut, bent,twisted, slit, or coiled and adhere to multiple items and surfaces. In addition, flexible magnetic materials require no surface treatments so no special precautions need to be taken to protect the magnetic surface. Our simple sheet on Care Tips will ensure that the use of magnetic sheeting on vehicles will not mar paint finishes. Technical Data of Flexible Magnet: Shapes: Rolls or Sheeting & Strips Magnetization: Axially Magnetized Br: 1,600 Gauss BHmax:0.60 MGOe Hc: 1,370 Oersted's Max Operating Temperature:212F/100 Density(lb/in3): 0.133

BCPL manufactures a variety of valves. These valves are manufactured in adherence to various international and Indian Standards. The latest addition to this range are Combo valves, Pressure relief valves, Actuator valves and LOT valves.

Brass Swing Check Valve BS 5154 Pressure Rating : PN-20 Material : Forged Brass Description : Screwed in Cover Ends : Screwed Female to BS:21 Item Code : FLB00045 Size : 15mm Notes : Available Valve Size : 15mm to 50mm

Brass Universal Check Valve BS 5154 Pressure Rating : PN-20 Material : Forged Brass Description : One Piece Body, Spring Loaded, Resilient Seated Ends : Screwed Female to BS:21 Specials : Suitable for Horizontal & Vertical Installation Item Code : FLB00048 Size : 15mm Notes : Available Valve Size : 15mm to 50mm

Forged Steel Check Valve BSEN ISO 15761, ASME B16.34 Pressure Rating : Class-800 Bore : Full & Regular Material : Forged Steel (A105) Description : Bolted Cover (Welded Cover for CL-1500 & 2500) Ends : Socket Weld, Butt Weld, Screwed Specials : LT & Cryo, Fire Safe, Seismic, IBR Item Code : FCS00012 Size : 15mm Notes : Available Valve Size : CLASS-800 8mm to 50mm CLASS-1500 15mm to 40mm CLASS-2500 15mm to 25mm Material : LF2, F5, F9, F11, F22, F304, F304L, F304H, F316, F316L, F316H, F91, F51, F321H, F321

Forged Steel Check Valve BSEN ISO 15761 Pressure Rating : Class-150 Material : Forged Steel (A105) Description : Bolted Cover Ends : Welded on Flanges Specials : LT & Cryo, Fire Safe, Seismic, IBR Item Code : FCS00035 Size : 15mm Notes : Available Valve Size : CLASS-150 15mm to 50mm CLASS-300 15mm to 50mm CLASS-600 15mm to 50mm Material : LF2, F5, F9, F11, F22, F304, F304L, F304H, F316, F316L, F316H, F91, F51, F321H, F321

Magnetic Writing and Drawing Board Material: ABS+ Magnet

Door Magnetic Catcher

Gun Metal Swing Check Valve BS 5154 Pressure Rating : Class-150 Material : Gun Metal, Bronze Description : Screwed in Cover Ends : Flanged Item Code : GM000047 Size : 15mm Notes : Available Valve Size : 15mm to 100mm

Gun Metal Swing Check Valve BS 5154 Pressure Rating : PN-20 Material : Gun Metal, Bronze Description : Screwed in Cover Ends : Screwed Female to BS:21 Item Code : GM000045 Size : 15mm Notes : Available Valve Size : 15mm to 100mm

Cast Iron Swing Check Valve Pressure Rating : Class-125 Material : Cast Iron / Ductile Iron Description : Bolted Cover Trim : Gun Metal Ends : Flanged Specials : Dash pot arrangement, By pass arrangement Item Code : CI000017 Size : 25mm Notes : Available Valve Size : 25mm to 600mm

Cast Steel Horizontal Check Valve DIN 2401, BSEN 13709 Pressure Rating : PN-40 Material : Cast Steel (WCB) Description : Horizontal Type, Bolted Cover Ends : Flanged, Butt Weld Specials : IBR Item Code : CCS00011 Size : 15mm Notes : Available Valve Size : 15mm to 200mm Material : LCB, WC1, WC6, WC9, C5, C12, C12A, CF8, CF8C, CF8M, CF3, CF3M, CN7M, CF10, CF10M, 3A, 4A, 5A, 6A etc.

Cast Steel Swing Check Valve API 6D, BS 1868, ASME B16.34 Pressure Rating : Class-150 Material : Cast Steel (WCB) Description : Swing Type, Bolted Cover (Pressure Seal Cover CL-900, 1500 &; 2500) Ends : Flanged, Butt Weld Specials : Fire Safe, Dash Pot Arrangement, By pass Arrangement, IBR Item Code : CCS00007 Size : 50mm Notes : Available Valve Size : CLASS-150  40mm to 900mm CLASS-30040mm to 950mm CLASS-600 40mm to 600mm CLASS-900  40mm to 600mm CLASS-1500� �  40mm to 600mm CLASS-2500  50mm to 300mm Material : LCB, WC1, WC6, WC9, C5, C12, C12A, CF8, CF8C, CF8M, CF3, CF3M, CN7M, CF10, CF10M, 3A, 4A, 5A, 6A etc.

Magnetic Stirrer Digital LCD Display Last Measurement in Memory Heating amp Stirring can proceed Simultaneously Bushless Motor for Low Noise Anti scratch and Corrosion Resistance Ceramic Plate Surface ABS Cabinet Brand Labtical Model NameNumber MS5LH Type Magnetic Stirrer Speed range  1002000rpm Maximum mixing capacity 5000 ml  Temp Range amp Accuracy 300C Accuracy 1C Temperature Sensor PT100 Time range 099h99min  Top Plat Size 168 x 168mm Display LCD  Motor Type Bushless Motor Operating Mode Temperature Speed Timing Memory last data  Power 500W Power Supply AC 220V 5060Hz Packing Dimension 335 x 235 x17cm  Weight 25kg