The products produced by the DHC to meet minimum standards for the Bloc lightweight concrete is made from a mixture of cement, fine aggregate, or foaming agent used for the gas bearing structure, bearing the thermal insulation in buildings under TCXDVN 316-2004 and are checked by TCXDVN 317-2004 (for foam concrete) and ISO 7959:2008 - applied to the blocks air, solidifying the general conditions apply (referred to as AAC), used for construction.
Clay bricks for old building (pagoda, temple), house's yard or garden L*W*H(mm): 200*200*20 Weight (kg):1.6 Water repellent or Water absorption (%):5-7
DESCRIPTION C2K is a durable, water-based, clear, acrylic sealer designed to seal interior or exterior brick & masonry walls, giving them a slight satin sheen. This masonry sealer is formulated with a durable acrylic resin that reduces water penetration on exterior walls, and minimizes brick dust on interior walls making brick walls easier to clean and giving them an attractive satin sheen. It can be used on most types of above-grade, vertical, interior or exterior masonry surfaces including: brick, stone, stucco, adobe, and moderately dense substrates. IMPORTANT NOTE Do not add water into product 3 EASY STEPS TO SEAL BRICK SURFACES Step 1: Clean If exterior surfaces are dirty, use pressure washer to clean. Allow the surface to completely dry before proceeding. Step 2: Spray - With a large surface area : Use low pressure sprayer - With a small surface area: Use a brush and roller Spray onto the wall or brick surface. Spray 2 coats. Each spray is 12-24 hours apart. Apply a second coat only when the first coat is dry Step 3: Let Dry Allow the surface to dry for 12 - 24 hours depending on ventilation of the wall STORAGE CONDITIONS Product must be stored in original, unopened and undamaged sealed packaging in dry conditions COLOUR Clear Liquid SHELF LIFE 12 months from date of production CONSUMPTION - 0,106Gal (400ML) Liquid: approximately application 2 m2 / layer - 0,463Gal (1,75L) Liquid: approximately application 10,5 m2 / layer - 1,27Gal (4,8L) Liquid: approximately application 28,8 m2 / layer
Light weight moulded cement bricks made to interlock and reinforced with PPE Fibres for extra strength Our light weight interlocking bricks are made with the needs of the modern builder in mind who wants a building brick that makes homes faster to construct and superior in all other ways to clay bricks. These moulded clay bricks are 40% lighter than a standard concrete alternative and they being made with an aircrete mix makes them a better insulator and more environmentally friendly than the clay brick alternatives. Interlocking moulded bricks are the construction product of the future with many builders switching to save money.
Mica, mica scrap, mica flakes, muscovite mica, phlogopite mica, biotite mica, silica sand, silica quartz, coal, himalayan salt, calcium fluoride, calcium carbonate, granite, river sand, bentonite, fireclay, soda potash, construction material.
Lightweight concrete brick, fence, partion wall.
Building brick.Manufacturer
Bricks.
Thin brick, bricks.
Brick.
Appearance: Stick Shape Color: Reddish Brick Aroma: Characteristic Flavor: Characteristic Moisture Content: Under 12% Total Ash Content: Under 10%
Clay bricks.
Terracotta tiles as flooring, roofing tiles and wall decorating tiles, extruded red clay bricks, paver bricks.
Natural rubber , charcoal, tuynel brick.Logistics , transport, and inspection services
Yarn and brick.
Portland cement, porcelain brick, ceramic brick.Logistics
Refractory product with refractoriness is over 1,750oC. Many size and shaped of products are available. We are pleased to enclose the specification as follow: Chemical composition 1. SiO2, (%), < 55 2. Al¼2O3, (%), > 37 3. Fe2O3, (%), < 1.7 4. CaO, (%), < 1 5. MgO, (%), < 0.2 6. K2O, (%), < 1.5 7. Na2O, (%), < 0.5 Physical properties 1. Refractoriness, (oC), > 1,750oC 2. Heat resistance 950oC û air, > 11 times
copper ( CU: 75-99%)
Aluminum ingot > 95%
Natural stone, bricks, tile bricks, furnitures.
