Our High Alumina Bricks have wide application in steel plants sector, where these are used in various kilns and furnaces
High alumina brick with high refractoriness under load, good thermal shock resistance, spalling resistance, erosion resistance and other advantages.
Custom Made Shapes Of High Alumina Bricks, Mullite Bricks
We are leading manufacturer & Exporter of Refractory Bricks which are widely used in various industries for various purposes. We have a three production unit with large production capacity for manufacturing High Alumina Bricks (Refractory Bricks). We are manufacturing 25% Alumina to 85% Alumina Bricks. Our range includes standard size and special size of Bricks, Burner Blocks, Tiles, Slabs, Blocks, or customer's required size. Our Refractory Bricks are manufactured from high-grade raw materials, which are procured from trusted and reliable vendors across the world. Our clients can avail this comprehensive variety of Refractory Fire Bricks at market leading prices. Our Refractory bricks are widely used in the construction of furnaces, kilns, fireplaces and fireboxes which can withstand high temperatures and are suitable for fireplaces in the industries and other commercial building.
Magnesia Bricks Description Magnesia Bricks are alkaline refractory materials. These products have over 90% magnesium oxide content and adopt periclase as the principal crystalline phase. Magnesia Bricks can be divided into two categories of Burnt Magnesia Bricks and Chemical Bonded Magnesite Brick. They have excellent performance of superior high temperature mechanical strength and volume stability. Magnesia Bricks can service in the high temperature of 1750.. They are ideal products for glass furnace application. Magnesia Bricks Features: It is a kind of alkaline refractory product with periclase as main phase magnesite-alumina spinel clinker as basic material. the product has such characteristics as good temperature vibration, good strength and volume stability in high temperature. Magnesia Bricks Application Basic open-hearth furnace for steelmaking Electric furnace bottom and wall Permanent lining of oxygen converter Non-ferrous metal metallurgy furnace Hyperthermia tunnel kiln Lining of rotary cement kiln Heating furnace bottom and wall Regenerative chamber of glass furnace Magnesia Bricks Properties High Refractoriness Good alkaline slag erosion resistance High apparent initial softening temperature Good thermal conductivity High thermal expansion Magnesia Bricks Manufacturing Process Burnt Magnesia Bricks are manufactured with magnesite clinker as the raw material and fired in the high temperature of 1550~1600 after smashing, burdening, mulling and molding. High-purity products can be fired in the temperature that over 1750. Chemical bonded magnesite brick is produced with certain chemical bonding through mixing, molding and drying.
PRODUCT DATA SHEET ACID RESISTANT BRICK Material : RED SHALE Type Acid Resistant Brick Size (mm) 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions Heavy thermal shock Typical Physical Properties of GANESHAS Acid and Chemical Resistant Brick Characteristic RED SHALE ACID RESISTANT BRICK Test Standard Bulk Density, gm/cc - 2.3 to 2.35 ASTM C-20 -Water Absorption, % - 0.1 to 1.5 IS 4860-1968 Apparent Porosity, % -0.5 to 1.75 S 4860 Acid Solubility (H2SO4), Loss in Mass,% -0.1 to 1.8 ASTM C-279 Modulus of Rupture, PSI -2133 to 3555 ASTM C-67 Compressive Strength, Kg/cm2 - 700-900 IS 4860-1968 Abrasion Resistant , Volume in mm3 -69 to 85 EN 102 Surface Hardness, MOHS Scale - 7
PRODUCT DATA SHEET ACID RESISTANT BRICK Material : FIRECLAY Type Acid Resistant Brick Size (mm) : 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : * We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: * Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions - Heavy thermal shock Characteristic Fireclay Type Acid Resistant Brick - Test Standard Bulk Density, lbs/ft3 - 2.25 to 2.30 ASTM C-20 Water Absorption, % - 0.1 to 1.8 ASTM C-20 Apparent Porosity, % - 4.05 to 4.14 ASTM C-20 Acid Solubility (H2SO4), Loss in Mass,% - 6.1 to 6.8 ASTM C-279 Modulus of Rupture, Mpa - 14.6 ASTM C-67 Compressive Strength, PSI - 15500 to 17250 ASTM C-67 Abrasion Resistant , Volume in mm3 - 71 to 96 EN 102 Surface Hardness, MOHS Scale - 7 Thermal Conductivity, BTU-in/hr-ft-F - 6.94 to 7.12 ASTM C-236 Thermal Expansion Coefficient,in/in/Fx10-6 - 2.6 to 2.8 EN 103
Refractory brick Al2o3 -38% Ccs ->210kg/cm2 Fe2o3 -
Refractories bricks
Refractory brick Refractory products and all range of foundry products Weight
Janta Group is one of the largest manufacturer of Refractory Bricks which are widely used in various industries for various purposes. We have a three production unit with large production capacity for manufacturing High Alumina Bricks (Refractory Bricks). We are manufacturing 25% Alumina to 85% Alumina Bricks. Our range includes standard size and special size of Bricks, Burner Blocks, Tiles, Slabs, Blocks, or customer's required size. Our Refractory Bricks are manufactured from high-grade raw materials, which are procured from trusted and reliable vendors across the world. Our clients can avail this comprehensive variety of Refractory Fire Bricks at market leading prices. Our Refractory bricks are widely used in the construction of furnaces, kilns, fireplaces and fireboxes which can withstand high temperatures and are suitable for fireplaces in the industries and other commercial building.
Technical Data Sheet Of Accoset-50 ALUMINA MORTAR (Test Certificate) General Properties A. Max service temperature - 1500 oC B. Maximum grain size - 0 - 1.5 mm C. Water required for mixing - 22 - 30% D. Setting - Airsetting E. Sintering Temp - 1550 oC Chemical Properties A. Al2O3 - 50.00% B. SiO2 - 31.00% c. Fe2O3 - 5.00% D. LOI - 7.00% Physical Properties A. Dry Density - kg / m3 B. CCS - 17 kg / cm2 after drying at 110C / 24 hr C. MOR - 20 kg / cm2 at 110 oC/ 24 hr 18 kg/cm2 at 800 C/ 3 hr Thermal Properties - A. Refractoriness ( Orton / C) - 31.5 orton cone/1699 oC Packaging - 25 - 50 kg bags Storage Life - 12 months Delivery State - Dry
Shape : Square Material ; Refractory For Use in Floor, Side Walls Size : As per drawing Resistance Durability : Fire Resistant
Being a top most firm, we offer Cupola Bricks to our clients. These are made by using very high quality ceramic raw material which ensures high durability at its user end. Our quality experts check the quality of the product before delivering it to our clients. Product is highly reliable which makes it worth demanding. Our supervisors make sure that the product delivered is perfectly performing well and is quality based. Available Size (in Inch/Diameter) 12D, 18D ,21D, 24D, 27D, 30D, 33D.
We are renowned manufacturers and suppliers of Refractory Killen Furniture, which are specifically designed and processed to meet exact requirements of the clients. Our team of professionals makes use latest technology and high grade raw material to produce these T- bricks. This range of bricks is considered as the most reliable construction material. Available Size (In Inch) 9X6X3, 9X9X3.
Being a top most firm, we offer Cupola Bricks to our clients. These are made by using very high quality ceramic raw material which ensures high durability at its user end. Our quality experts check the quality of the product before delivering it to our clients. Product is highly reliable which makes it worth demanding. Our supervisors make sure that the product delivered is perfectly performing well and is quality based. Available Size (in Inch/Diameter) 12D, 18D ,21D, 24D, 27D, 30D, 33D.
Shape : Round Usage ; Interior Decor Material : Refractory materials Design Method : Factory Made Resistance Durability ; Fire Resistant
Refractory Brick's Standard size ( 230x115x75 mm ) But we make all sizes of bricks as per Requirement. Alumina ( AlO) - 70 % The weight of bricks is 5.2 KG Bulk density (B.D) - 2.6 Apparent porosity % Max - 22 Ferric ( FeO) % Max - 2.5 Cold Crushing Strength - 500 kg/cm RUL Temperature % MAX - 1480 PLC Temperature % MAX - 1500
Shape : Rectangular Material : Refractory materials For : Use in Roof Resistance Durability Fire Resistant Coverage Area (Sq. feet) : 1 Sq. feet