LJ-HGM Sliding Rail Wear Measuring Gauge Sliding rail wear measuring gauge is used to measure the rail profile vertical wear and side cut value and switch rail desent value. It is Digital display reading, The reasonable design makes it light ,easy to operate and intuitive in reading. Model: LJ-HGM Type: Rail Wear Gauge Material: Stainless Steel Vertical wear:0-15mm Lateral wear:0-15mm Score value:0.01mm Indication error: ± 0.15mm
Analogue Rail Wear Gauge Analogue Rail Wear Gauge is mainly used to measure the vertical wear and lateral wear of the rail. The reasonable design makes it convenient operation and intuitive reading. Benefits Analogue Rail Wear Gauge is easy to operate,high reliability,small volume,light weight etc. Specification Model: LJ-GM-B Center vertical wear measure range: 0-15mm Lateral wear measure range: 0-25mm Score value: 0.1mm Supply Customize: UIC60/60E1, UIC54 /54E1, 115RE 68TR ect all profiles Block: customize block for gauge
per annum. Price for volume over the MoQ 30 Million boxes is negotiable. Payment by L/C 100% at sight, transferable, irrevocable and confirmed. Product Name: Disposable Vinyl/Nitrile Blended Examination Gloves Single use, non-sterile, no measuring, Latex free Sizes: XS, M, L. XL. XXL Color: Blue, Green Structure: 5 fingers, beaded cuff for easy donning, ambidextrous Surface: Smooth The Vinyl/Nitrile Blended glove is a new type of synthetic glove that was developed based on the vinyl glove production technology. Its material is compounded with PVC paste and Nitrile latex, so the finished production has the advantage of both PVC and Nitrile gloves. Comparing with the vinyl gloves, the Vinyl/Nitrile Blended glove can better satisfy the users demands, it feels softer, more flexible and more comfortable when wearing. Intended purpose: The examination glove is disposable non-sterile device intended for medical purpose that is worn on the examinerâ??s hand or finger to prevent contamination between patient and examiner. Medical Device Quality Management System EN ISO 13485 Certificate, ISO 9001 Quality Management System Certificate - 2 FDA FDA Registration Information - 510K Product 510K Biocompatibility Test Report EU CE Certificate (DOC, Technical Documentation Review Report )
Rail Profile Gauge Rail Profile Gauge is is mainly used to measure the vertical wear and lateral wear of the railThe reasonable design makes it lightconvenient operation and intuitive reading Features 1 Digital type with direct readings LCD display screen clear and readable No calculations requiredgives direct reading When reading hold down the HOLD button to fix the measurement value and facilitate reading 2 High measuring accuracy The measurement accuracy is 001m 3 Easy to use measure the vertical and lateral rail wear at the same time Position the rail wear gauge on the outer side of the rail Push the vertical and lateral rail wear gauge so that the measuring probe is in contact with the upper surface and inner side of the rail respectivelyThen the vertical and lateral wear of the rail can be read 4 Metric imperial unit 5 Support customize We could customize all kinds wear gauge according to different rail profiles and different measure points 6Fast calibrate Onekey zero clearing function can be quickly calibrated before each use to reach the factory measurement accuracy 7 Magnetic fixed part Strong magnetic fixed part to attach to the rail 8 Rail fillet as measuring base to ensure measure data more accuracy Rail fillet is more clear than rail bottomno dust It could ensure the measure result reliability 9 Portable Handle This product is designed with a handle that is easy to hold which greatly improves the portability of the product It can avoid touching the ruler body directly cause the ruler body to be stained and corroded improve the product service life Model LJGMA Center vertical wear measure range 015mm Lateral wear measure range 025mm Score value 01mm Indication error 0 15mm Supply Customize UIC6060E1 UIC54 54E1 115RE 68TR ect all profiles Block customize block for gauge
R50-R60: used long rail steel scrap in compliance with ISRI standard classification R50 (51.67 kg/m), Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switches, and guard rails, or rails with split rail. b) R65: used long rail steel scrap in compliance with ISRI standard classification R65 (64.72 kg/m), in length 1 & 1,5meters on per bar basis. HMS 1/2 STEEL METAL SCRAP FOR SALE: Iron scrap HMS1 & 2 C: 0.06-0.082% Mn: 0.75-1.05% SI: 0.13-0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15% R - 50 [ 51.67Kg/M] and R -65 [ 64.72 Kg/M ] grades as per ISRI 027-029 and GOST 7173-75 / GOST 8165-75, Cut to length [in buyers option ]
Digital Rail Corrugation Gauge Digital corrugation Wear Gauge is a direct reading measuring tool which is used straight vertical measurement methodIt is mainly used for measuring rail top surface and side surface corrugation wear value BENEFITS Its simple in operation compact in size easy to carry high precision in measurement reliable in installation and positioning simple in use ConvenientEasy to site construction ensure the quality of work Specification Model LJBMA Type Rail Corrugation Gauge Material Stainless Steel Dimensions L x W x H 1201224 cm Horizontal measure range 1000mm Vertical measure range 8 25mm Accuracy 005mm Resolution 001mm Repeat error 002mm Working temperature 5 40
Micro silica (silica fume), silica, fly ash, pozzolano, ggbfs and white cement, other cementatious materials and factory/plants specialized spare parts & equipments, automation & switchgear, drives & transmission spares, instrumentation & pump, pneumatic & hydraulic spares, valves & actuators, mechanical parts, high carbon ferro chrome, foundry pig iron, iron ore concentrate, chromite ore, antimony ore, silicon metal 441 (powder), ferro silicon (fesi), iron ore pellet, copper concentrate.
Digital Switch Rail Lateral Wear Gauge The Switch Rail Lateral Wear is used to measure the switch rail lateral wear and the descent height value of the switch rail this device can be used for all types of switch rail BENEFITS Switch Rail Lateral Wear Gauge has the advantages of high measuring accuracyeasy to operatehigh reliabilitysmall volumelight weight etc Specification Model LJJGCMI Type Switch Rail Lateral Wear Gauge Material Stainless Steel Dimensions L x W x H 315190200 mm Vertical wear measure range 92193mm Lateral wear measure range 0120mm Resolution 001mm Indication error 0 15mm
Function Gas mask Can prevent various organic gases, such as formaldehyde, gasoline, ether, suitable for spray paint, oil, machinery, polishing, dust and other workplaces A.The full face gas mask made by high grade silica gel, endure the aging , avoiding allergy, durable , easy to clean. B. Double-folded the silica gel structure enhanced air tightness and face fitness C. The dual headphone with adjustable straps design more comfortable to wear D. Push type and replaceable cartridge E. The unique audio device, allowing you to disseminate the messages more clear. F-Large valve disc breathing valve design,breathing resistance is small,let the wearer enjoy smooth breathing. G.Double filtration box filtration, double filtration area, low breathing resistance -The universal installation structure can be separately anti-virus or dust-free, and can be easily switched. -Military active carbon with large adsorption capacity and high Strength -Double filtration agent has long service life Half Face Gas Mask is composed of the body of mask, the cartridge, Inhale and exhale valves, headbands. -It is designed for painting and organic vapor protective (95% effectiveness) - The mask can be taken off and hanged on the neck during rest time. - Replacement parts available, filters sold separately.
Product Description R50-R60: used long rail steel scrap in compliance with ISRI standard classification R50 (51.67 kg/m), Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switches, and guard rails, or rails with split rail. Price of product ( USD price or FOB price) : USD 250 - 260 per MT Product origin : Europe Key Specifications/Special Features : Nominal Chemical Composition. Carbon (C) 0.20% to 0.60% Manganese (Mn) 0.60% to 0.90% ... Nominal Specification for R50 51.67 kg/m GOST 7173-75. Carbon (C) 0.40% to 0.58% Manganese (Mn) 0.75% to 0.88% ... Nominal Specification for R65 64.72 kg/m GOST 8165-75. Carbon (C) 0.40% to 0.58% Manganese (Mn) 0.75% to 0.8" Minimum Order Size and Packaging details : 12500 MT
1, Safe working load: 200kg 2, The back board folding angle: 70 3, The thigh board folding angle: 30 4.TR/ATR:0-20 5, The four motors automatically realize various positions. The motors are selected from internationally renowned brand Timotion, which are safe and noiseless. 6, Two control methods, operation handle control and guardrail built-in button operation, control handle is clear and easy to operate; built-in buttons on the side rail near headboard, graphic display, clear at a glance. The key has lock function, which reduces the probability of misoperation and locks safely. 7, Side rail: 1),Two side rail in each side of bed. 2),It can be automatically locked when raising, and each guardrail can bear more than 50KG. 3), Guardrail safety switch design, placed under the guardrail to avoid misuse of the patient; 4), Equipped with gas spring for easy operation. 5), The steel structure of the guardrail base is welded on the bed to ensure safety. 6), The 4-pieces guardrail has angle indicator that allows the caregiver to quickly and easily adjust the backrest angle and TR/ATR angle of the bed. 7),It equipped with guardrail built-in button to make it easier for the patient to operate the bed. 8, Casters 1), The four casters use 125mm center control one. 2), Steel structure, precision ball bearings are placed in the rotating head and the caster, the caster frame is equipped with a wheel cover made of synthetic material, suitable for locking the lever with a cam hole. Caster surface material: polyurethan, passed EN 12531 standard, single dynamic (force) load is not more than 175 kg, static load is not more than 200 kg 3),Braking system: Pedal-type synchronous braking arms on both sides of the bed, adopting all-metal structure, compact structure and reliable braking. 9, Shank board can be adjusted manually by simple steel support for convenience position. 10, At the 4 corners of the bed, there is an diameter HDPE anti-collision wheel which intergated on H/F board. 11, There are 1 hook in each side for drainage bag. 12, It equipped with manual CPR for emergency treatment.
Rigid Hull Fiberglass Inflatable Boat RIB boat, Fiberglass hull with inflatable tube boat, RIBs 580 Model: RIB580 Full length: 580cm/19ft Full width 245cm Tube Dia: 53cm Hull weight: 422kgs Max person: 12 persons Gross Weight:520kg Recommend HP: 60 to 90 HP Packing size: 560*210*115 cm Materials, 0.9mm or 1.2mm pvc materials or hypalon materials boat Standard accessories: Repair kit(materials,spanner,air valve,manual,glue) Extra accessories: 5 sets life jacket inside aluminum fuel tank Anchor and rope FRP anchor holder Bilge pump 60 A Battery with box Cream color cushion Console(Alu wind screen,Six wire switch,oil gauge) Seat box Steering system Stainless or FRP A Bar with lighter Trailer Hydraulic steering system Stainless Canopy/ T-TOP Canopy Stainless C type ladder FRP Step Butffly type Anchor holder Stainless rail duct New type of square anchor Pull stick Teak floor
Rail Web Width Measuring Device is a kind of measuring instrument for measuring the rail web width. BENEFITS Using NdFeB strong magnet positioning , accurate positioning , high repeatability of measurement; LCD digital display, easy to reading , with accurate and reliable measurement; The positioning block can be customized according to the rail type ; Different rail types can be measured by changing the positioning block
Rigid-inflatable boat (RIB) is made by fiberglass hull and inflatable tube, it is a lightweight but high-performance and high-capacity boat constructed with a solid, shaped V hull . The design is stable and seaworthy. which can be used for a variety of applications including rescue, interception, patrolling,pleasure,leisure and as tenders for larger ships. Model: RIB580 Full length: 580cm/19ft Full� width� 245cm Tube Dia: 53cm Hull weight: 422kgs Max person: 12 persons Gross Weight:520kg Recommend HP:� 60 to 90� HP Packing size: 560*210*115 cm Materials, 0.9mm or 1.2mm pvc materials or Hypalon materials boat Standard accessories: Repair kit(materials,spanner,air valve,manual,glue) Original manufactuer eastsportboat from China. Do not support transport by air. only can send by sea from China Equipment Extra accessories for extra pay: 5 sets life jacket inside fuel tank Anchor and rope FRP anchor holder Bilge pump 60 A Battery with box Cream color cushion Console(Alu wind screen,Six wire switch,oil gauge) Seat box Steering system Stainless or FRP A Bar with lighter Trailer Hydraulic steering system Stainless Canopy/ T-TOP Canopy Stainless C type ladder FRP Step Butffly type Anchor holder Stainless rail duct New type of square anchor Pull stick Teak floor
19ft Rigid hull inflatable RIB boat fiberglass fishing boat RHIB boats rigid-inflatable boat (RIB) is made by fiberglass hull and inflatable tube, it is a lightweight but high-performance and high-capacity boat constructed with a solid, shaped V hull . The design is stable and seaworthy. which can be used for a variety of applications including rescue, interception, patrolling,pleasure,leisure and as tenders for larger ships. Rigid Hull Fiberglass Inflatable Boat RIB boat, Fiberglass hull with inflatable tube boat, RIBs 580 Model: RIB580 Full length: 580cm/19ft Full width 245cm Tube Dia: 53cm Hull weight: 422kgs Max person: 12 persons Gross Weight:520kg Recommend HP: 60 to 90 HP Packing size: 560*210*115 cm Materials, 0.9mm or 1.2mm pvc materials or hypalon materials boat Standard accessories: Repair kit(materials,spanner,air valve,manual,glue) Extra accessories: 5 sets life jacket inside aluminum fuel tank Anchor and rope FRP anchor holder Bilge pump 60 A Battery with box Cream color cushion Console(Alu wind screen,Six wire switch,oil gauge) Seat box Steering system Stainless or FRP A Bar with lighter Trailer Hydraulic steering system Stainless Canopy/ T-TOP Canopy Stainless C type ladder FRP Step Butffly type Anchor holder Stainless rail duct New type of square anchor Pull stick Teak floor
double tube hand pump for BIG SUP board TRIPLE ACTION it's more compact and light. It's the best for brands who want to use a pump of triple action as standard equipment in their SUP. The compact piston permits also females and young guys to be able to achieve easily high pressure. HP6, being used in TRIPLE-doublesingle action, can achieve 30psi rapidly and effortlessly. The switching 3-2-1 can be realized easily and comfortably rotating the switch knob. Itâ??s completely customizable for colour, graphic and calibration of gauge meter. Features: · capacity 3.2+3.2L, max. pressure 30psi as DIN EN 16051 · switch knob to change comfortably from triple to double or single seals and anti-sand filter for long life of pump and SUP extra long body and high-airflow piston for an easier inflation pump completely shock-proof, compact and light (1.7kg) · shockproof gauge meter
Qingdao East International Co Ltd Inflatable RIB520 5.2 m, 2021, Qingdao, China Marine RIB Inflatable boat, RIB boat used for leisure , sport, recreational RIB520 Full length 520cm Full width 245cm Tube diameter 53cm Hull weight 400kg Max person 8+1 Recommend HP 70HP Packing size 460 x 180 x 100 cm Standard equipment: A pair of paddle Foot pump Repair kits The materials , Spanner, Glue,User Manual Bow Box Rear box 60L inside aluminum fuel tank Console with seat ï¼?wind screen,Six wire switch,oil gauge FRP anchor base Bilge pump 60A Battery with box and switch Sun cushion with cream color FRP Abar Extra accessories for extra pay Hydraulic steering system, Outboard engine Boat trailer We are manufacturer in China. we made and supply boat as order. we can give discount for bulk order. we accept OEM or OEM order as customer requirement. The boat price without freight cost, without outboard engine. The payment term: 50% deposit, the rest 50% before shipment. The delivery date: about 45 working days after payment.
Product Description Contact rail gauge, also called third rail gauge, is a special measuring instrument for measuring the guide height of contact rail (the vertical distance between the horizontal surface of contact gauge track) and the pull out value (the horizontal distance between the inner surface of contact gauge track) in rail transit. Specification Model LJ-JCG-I Type Third Rail Measuring Gauge Material Aluminium Alloy Dimensions (L x W x H) (mm) 1650*120*250mm Vertical Measure range 1418±25mm or customize Horizontal Measure range 100±10 mm or customize Accuracy 0.5mm
Commodity: Used Rails R-50 Gost 7173-75 & R65 Gost 8165-75 Origin: Spain. Port of Loading: Algeciras Port, Spain. Supplies: 1 Trial Shipment for 20,000 Mt (+/- 5%) and Up to 100,000 Mt (+/- 5%) Every 30 Days for a Maximum of 36 Consecutive Months. Packaging: the Goods Will Be Packed in a Way That Ensures Their Safety During Transportation. The Goods Are Palletized and Wrapped, With a Weight Per Pallets of 1.5 / 2 Mt Each One. Sale Price: the Sale Price Will Be Set According to the International Market, With an Interesting Discount. Price : Us$245.00 Per Mt Cif, Any Asian Port. Way to Pay: Through Dl/c Open by the Purchaser, Irrevocable, Non-transferable, Non-divisible and Payable Against Shipment Documents, Analytics by International Laboratory, Etc. Hs Code 73021090 Observations: We Can Sell Goods in Situation: Exw Pacorini, Fob or Cif. S/n Parameter (S) Results 1 Carbon (C): 0.50 0.68% Max. 2 Manganese (Mn): 0.70 1.00% Max. 3 Silicon (Si): 0.18 0.40% Max. 4 Phosphorous (P): 0.035% Max. 5 Sulphur (S): 0.045% Max. 6 Arsenic (as): 0.013% Max. 7 the Rails Must Be Cut: Between 1.00 M to 1.50 M Maximum. 8 R-50 51.67 Kg/m 9 R-65 64.72 Kg/m. 10 Measurements Cut at 1.00 / 1.50 M.
Railways scrap metal r50/r60/r65 : second quality railway used rail steel no. 1. standard section tee rails, original weight 50 pounds per yard, over heavier, 120.50 m rails. steel no.2. cropped rail ends, standard section, original weight 50 pound per yard and over 12.50 meters long. 28)b) (28c) rail steel no.2 t rail ends standard section original weight 50 pounds per yard and over 12.50 pounds per yard and over 12.50 meters rail, steel no.3, standard section fee, gender, and / or guard rails, free from frog and switch rails not cut apart, and contain no manganese, cast, welds or attachment any kind except angle bars also rails, not found and without radiation and explosive substance... 1.0m ( 1.0 1.5m( rail ferrous (r 50/ r65 chemical composition..