www.fotamcarbide.com provide 99.95% Pure Tungsten Products Tungsten Crucibles W Crucible for Sapphire Growing Because of the high melting point(3410â??) of tungsten, tungsten crucible is widely used in the industrial furnaces such as sapphire single crystal growth furnace, quartz glass melting furnace, rare earth smelting furnace and other industrial furnaces of which the working temperature is over 2000â??. Especially for sapphire single crystal growth furnace, tungsten crucible with features of high purity, high density, no crack, precise size, smoothy internal and external wall is the key note to seed success rate, crystal quality control, off crystal stick pan and service life in sapphire crystal growth process. During sapphire production, Al2O3 - the compound that is to become the future single crystal - is melted in tungsten crucibles. It is in the Kyropoulos process that our crucibles show their strengths to best effect. They arerepeatedly heated to more than 2 000 �°C (3632 �°F) and then cooled down again. This process, which would cause fissures and distortions in other materials, is not a problem for our products.
99.95% Pure Tungsten Products Tungsten Crucibles W Crucible for Sapphire Growing Because of the high melting point(3410) of tungsten, tungsten crucible is widely used in the industrial furnaces such as sapphire single crystal growth furnace, quartz glass melting furnace, rare earth smelting furnace and other industrial furnaces of which the working temperature is over 2000â??. Especially for sapphire single crystal growth furnace, tungsten crucible with features of high purity, high density, no crack, precise size, smoothy internal and external wall is the key note to seed success rate, crystal quality control, off crystal stick pan and service life in sapphire crystal growth process. During sapphire production, Al2O3 - the compound that is to become the future single crystal - is melted in tungsten crucibles. It is in the Kyropoulos process that our crucibles show their strengths to best effect. They arerepeatedly heated to more than 2 000 �°C (3632 �°F) and then cooled down again. This process, which would cause fissures and distortions in other materials, is not a problem for our products.
Tungsten W catalyst. Based on Assay - with 14-15% W and 3,5-4,5% Ni - in barrels about 18-20 tons - fine granules, about 2cm in length - notification can be done if needed. - Origin EU, loading port EU Port
Tungsten crucibles for quartz melting, sapphire growing furnace and high temperature vacuum furnace are also our main products.(including 35kg,65kg,85kg,120kg) Crucible for sapphire growing 1. Purity: 99.95% 2. Density: 18.3g/cm3 3. Application temperature environment 2300.
Due to the manufacturing advantages of tungsten rods, tungsten sheets, tungsten machining parts and tungsten processing equipment, Sunstone established a Division of hot zone of sapphire crystal growing since 2008. Until now Sunstone provided a large number of hot zone parts like crucibles, sheet and rods to Russia, Ukraine, USA, Japan, Korea, Thailand, Singapore Taiwan and Hong Kong. So now we have been gradually formed the capacity of 30 sets hot zone in 35Kg, 65Kg, 85Kg and 120Kg. Sunstone has a sound quality management system of ISO9001 and ISO14001 and get the certification. Sunstone has a excellent testing equipment of physical properties like density, hardness, surface roughness, grain size, tensile strength and other parameters, even ultrasonic NDT. The distinguishing characteristic of Sunstone 's tungsten crucible is high density, high purity and high precision machining. As the whole set of hot zone parts is completed in Sunstone , so the quality between the components is to get a good guarantee. With its excellent quality and reasonable price has been widely recognized by the industry of sapphire crystal growing and hot zone furnace at home and abroad, Sunstone has been designated the sole supplier and leader in domestic and foreign industry. Because of their excellent corrosion resistance again sapphire melt and their high temperature creep resistance, tungsten crucibles are used for sapphire crystal growing in all common processes. Wooden case.
Sintered tungsten crucible Sintered with tungsten powder the sintered tungsten crucibles are multi-purpose production in sintering furnace, large crystal growth furnace. Thickness of sintered tungsten crucibles is usually 8-12 mm; diameter is typically 100-550 mm; height is typically 50-700 mm. Such crucible Purity: W �?� 99.95%; density is usually up 18.2g/cm3, by special needs the density can up 18.8g/cm3 or more. Features: 1.The overall density of sintered tungsten crucible is fairy high between 18g/cm3 to 18.3g/cm3; 2.Its chemical purity of sintered tungsten crucible can be above 99.95%; 3.The diameter of sintered tungsten crucible can be above 200mm; 4.The surface roughness of tooled crucibles does not exceed Rz 6.3; 5.The use temperature of sintered tungsten crucible should be below 2450�C in vacuum or deoxidize atmosphere. 6. The shapes and dimensions of crucibles are also made in accordance with customers' requirements. material density size W >99.95% 18g/cm318.3 g/cm3 Diameter: 100-550mm; Height:50-700mm Stamped tungsten crucible The tungsten crucibles can be produced of a tungsten plate by stamping, spinning, or welding. It can be used to produce single-use square or round crucible. Thickness typically 0.5 to 3 mm. Such tungsten crucible Purity: W �?�99.95%; density is usually up 19g/cm3 Forged tungsten crucible The tungsten crucible can be made of tungsten rod by turning , generally they are smaller and with higher density. Usually the wall thickness 3-10 mm; diameter of 80 mm. They are widely used by sintering furnaces for ceramics and other materials or vacuum evaporation coating machine. Purity: W �?� 99.95%; density are usually based on different diameters of up to 18.3 to 19g/cm3 Notice: 1.Before use, it is recommended that the consumer anneal (de-gas) crucibles in a vacuum without batch charging; 2.In a furnace, the annulment process should be supported with a vacuum at P< 10-3mmhg; 3.When preparing a sintered tungsten crucible for work, the consumer should not allow a sharp rise or fall in temperature, or abbreviate the recommended time periods for holding temperatures. Applications Tungsten crucible is mainly used used for rare earth,sapphire single crystal growth furnace , quartz glass, Metal extracting, metallurgical industry, machinery processing, glass and ceramic industries, etc.
China Manufacturer with main products:tungsten crucible ,tungsten rod ,tungsten plate/sheet ,tungsten tube ,tungsten heating elements ,tungsten wire ,molybdenum crucible ,molybdenum rod ,molybdenum plate/sheet ,molybdenum tube ,molybdenum electrode ,alloy products
Tungsten
We can supply more than 40000000 mt contacts us for details. thank you.
We supply tungsten. Price negotiable. Specific terms are negotiable.
Tungsten bar, w 99.8%min Tungsten rod, sheet, wire: w 99.9%min
Tungsten 99.99% , density 18
Pure tungsten rod Tungsten is mainly used in powder metallurgicalï¼?lightingï¼?electronicsï¼?high-temperature furnaceï¼?aerospaceï¼?chemical and glass ceramics industries for its heatï¼?abrasion and corrosion resistance and chemical stability. Tungsten plateï¼?Tungsten Rodï¼?Tungsten wire and other tungsten parts Producte Item Trade Mark Specification Standard
tungsten, Payment Terms : T/T, Bank or Wire Transfer Upfront Upon Proforma Invoice Pricing, Total or Minimum order Quantity , Quality and Delivery time get back to us so we can provide all those for you if interested. Regular others also have added advantages, Bulk orders as well. tungsten,,.
Tungusten Isotope W184
Tungsten Bar Grade: W-1, XW-2 Appearance: silver-gray or dark gray metal bar Specifications: 16mm*16mm*(550-570)mm Packing: metal box or environmental-friendly carton box Chemical specification: Super purity tungsten bar specification (%) Main contents: W: 99.99 Contents of other elements Be0.0001 N0.0005 Zn0.0001 Ba0.0001 Al0.0001 As0.0001 H0.0005 O0.004 Sn0.0001 Co0.0001 Cu0.0001 Fe0.0001 Pt0.0001 Mn0.0001 Mo0.0002 Ni0.0001 Pb0.0001 Sb0.0001 Cd0.0001 Mg0.0001 Ca0.00045 Bi0.0001 Ti0.0001 Cr0.0001 Na0.0009 K0.0005 Quantity: 20/box Net box weight: 50 kg/box Applications: High purity tungsten bars are used in the field of national defense, military weapons and precision electronic industry and other precision technology and materials, to prepare rods or tungsten wires, or as high performance electrodes, heating elements or high temperature components. Ultra high purity tungsten (5N or 6N) is often used as a gate, link and barrier metal in the electronic industry due to its high resistance to electron migration, high temperature stability and the formation of stable silicides. The ultra-high pure tungsten and tungsten or tungsten titanium silicon composite material is often made of sputtering target materials with high purity, in the form of the film covered on the substrate or other thin film layer, for very large-scale integrated circuit as a resistance layer, a diffusion barrier layer and the metal oxide semiconductor transistor as the gate material and link materials.
Uses are as electrodes, heating elements and field emitters, and as filaments in light bulbs and cathode ray tubes. Tungsten is commonly used in heavy metal alloys such as high speed steel, from which cutting tools are manufactured. It is also used in the so-called 'superalloys' to form wear-resistant coatings Both raw and finished Tungsten are available For price and specifications please contact us
Hollow OD20mm - 100mm Pure Tungsten Rod Surface Polished For Heating Tungsten hollow rods can be made as per customers designs. Its outer diameter is within 100mm, inner diameter no less than 5mm, length is below 500mm. Tungsten hollow rods are widely used in vacuum coating industry, target materials raw materials, aerospace industry, Marine automobile industry, electrical industry, instruments industry, etc. We produce tungsten hollow rods by tungsten powder with 99.95% purity. High quality products have been made after decades of procedures such as pressing, sintering, rolling, cutting and surface grinding. Super sputtering target (single heavy reach to 120kg) is available at present. Tungsten Hollow Rods Description: Purity: Wâ?¥99.95% Density: more than 19.1g/cm3 Tolerance: +/-0.05mm Supply state: Surface polishing, CNC machine processing Quality standard: ASTM B760-86, GB 3875-83
Customized Tungsten Carbide Nozzle TC Sand Blasting Nozzle ,tungsten carbide nozzle with wear-resistance fuction,high temperature resistance, wear resistance and corrosion resistance.It is mainly used for the oil pump valves such as sand wells, heavy oil wells, offshore oil wells and high-pressure sulfur-resistant oil wells in the petroleum industry
Tungsten bolts, Tungsten fastener Material : Pure W purity:ã??99.95%ã??W size: M2 â?? M90 Surfaceï¼?Polishing Main Item / Productï¼?titanium foil/titanium bar/Titanium tubetitanium fastener/Zirconium sheet/Zirconium tube/Zirconium bar/Tungsten plate/Tungsten Bar/Tungsten fastener/Molybdenum sheet/Molybdenum rods/molybdenum wire/Tantalum sheet/Tantalum strip/Tantalum rod/Tantalum wire/Tantalum tube/Niobium sheet/Niobium foil/Niobium tube/Niobium bar /Niobium wire/Cobalt wire/Cobalt rod/ Cobalt plate/Evaporation Pellets & Pieces/Crucibles/Pure metal and metal alloy sputtering target material
