Pure Sine Wave Inverter Suppliers and Manufacturers

Home ups and small office use: IG series: 300W-1200W Pure sine wave online Inverter IP/OP: 110/120VAC 50/60Hz IP/OP: 220/230/240VAC 50/60Hz. Key features User selectable for accepting wider input voltage Full automatic and silent operation Rack Tower design High Frequency Off mode charging Available in five AC outlet configurations: NEMA, Schuko,French, India, and BS1363 Compact size for convenient use and storage. Built-in 8Amp super charger for up to 100Ah battery Small scale and cost effective inverter for home appliancesand office equipment Two-steps intelligent charging control to recharging time Our inverter is smart and stable for home and office use. Cartons,foam and woond

1000w pure sine wave inverter Battery : 12v /200ah Output : 220v /50hz Input : 130v-270v protection : short circuit, over load,low battery,Full charge.

Out put waveform: pure sine wave inverter Continuous power: 500watt Surge power: 1000 Watt Input volt: 12V/24V/48/110V DC Output volt: 100V/110/120/220/230/240 V AC Frequency: 50Hz/60Hz Efficiency: >85% No load current draws :

Datas: Model: VS-300 Wave: pure sine wave Continuous power: 300W Surge power: 600W Input volt : 12VDC/24VDC/48VDC/110VDC Output volt :100/110/120VAC/220 /230 /240VAC Frequency : 50 / 60Hz Efficiency : > 85% No load current draw :

Pure sine wave output with constant voltage and frequency Digital signal controller based pwm technology using mosfet Longer battery life by intelligent multi stage battery charging save electricity by efficient charging Normal/ups selection to run computer . Led display (mains on, inverter on , mains fuse blown , battery low , over load , short circuit ) Over load protection High/low voltage protection

1500 watt inverter pure sine wave ROGER Pure Sine Wave VertaMax DC to 120 AC Power Inverter provides household power for RV's, cars, boats and wind & solar off-gird systems! The Pure Sine Wave VertaMax 1500 Watt converts 12 volt battery power to 120 AC power so you can power up household appliances when the electrical grid is not accessible. The Pure Sine Wave VertaMax 1500 is capable of powering any device or multiple devices that do not exceed 1500 Watts in total continuous power draw (3000 Watt surge capacity). Typical examples of appliances that can be powered by this inverter are: computers, televisions, video game players, cellular phone charger, a microwave and the list goes on. The ROGER 1500 provides reliable, pure sine wave AC power whenever you need it! url:http://www.rogerele.com

1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converterâ??s usage, which reduced the cost of equipment investment, easy to connect wires and control. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Wide input voltage can be set according to customer's requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy. 11, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 12, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 13, European CE (EMC, LVD, UL1741) and ISO9001 certificates. [Optional] A, RS485 communication; B, AC bypass complementary function; C, Built-in charger

Continuous power: 1000w peak power: 2000w input: 12/24vdc output: ac 220v10% output frequency: 50hz+2hz/60hz+2hz efficiency: ;98% wave form: pure sine wave

Introduction: The I-P-PPI 1000W design of pure sine wave inverter are ultimate choice of appliances demand a clean, pure source of AC power.This inverter is a high conversion efficiency model and continuous working module generating a sinusoi-dal wave from a 12/24V/48V - battery bank, which can supply energy to various loads such as resis-tive load (heater),inductive load (air conditioners, refrigerator),motors (vacuum cleaners), and rectifier load (computer). It is compatible with optional accessories such as the Remote ON/OFF Control unit and the selectable sockets. Application: Designed for a variety of applications such as residential, commercial, emergency and vehicles, constructi- on and solar & wind system etc. Product Features: 1. Low voltage input model adopt original imported IR MOS tube.The current is 5.5 times of rated current. 2. It low voltage input connection adopt high frequency low resistivity electrolytic capacitor. How- ever ordinary capacitor will explode if the temperature become very high. 3. Every transformer has independent fuse protection.If there is a MOS tube break down,then the fuse will break fast.So that will not effect other MOS tube to break. 4. All the protection signal adopt monolithic processing.Circuit is simple and stable. 5. Input and output are isolated to ensure the operation stability 6. Output circuit adopt convertible circuit.The SPWM signal produced by Single Chip Microcomputer drive the A3120 optical coupler.Then the optical coupler isolated drive the output through IGBT tube.Adopt negative pressure to cut off IGBT to eliminate Miller effect,so the output is more steady. 7. The whole design adopt patch technology.The circuit is simple and steady. 8. Optional remote ON/OFF control switch; 9. Smart protection function with LED and alarm show. Protection: Battery over-voltage and under-voltage protection Over-temperature shutdown Automatic overload protection Short-circuit protection Battery reverse polarity protection. 420MM*203MM*90MM 4.1KG.

we are a professional manufacturer of inverters DC12V24V48V OU AC110V 220V 230V 240V 50/60HZ

1. Main Features: 1. Input & output is fully insolated to endure impact of sensitive appliances and protect the inverter from being easily damaged. 2. High Surge: High surge current capability starts difficult loads such as TVs, camps, motors and other inductive loads. 3. Soft start: Smooth start-up of the appliances. 4. Pure sine wave output waveform: Clean power for sensitive loads. 5. Low total harmonic distortion: Below 5% 6. Stable working performance: Even in the situation of under voltage or over voltage, the inverter could endure 10% voltage fluctuation until it shutdowns. 7. Cooling fan with internal temperature sensor will turn on automatically when the inverters becomes warm and turn off after the temperature dropped. 8. LED indicator on the front panel shows the working and error state. 9. Digital displays indicate battery voltage and inverter output voltage. 3. Protect functions: 1. Over load protection 2. Over current protection 3. Over voltage protection 4. Low voltage protection 5. Surge protection 6. Short circuit protection 7. High temperature protection 8. Reverse connection protection 9. External fuse protection 10. Buzzer alarm function 4. Applicable for: ( Solar/Wind/Home System ) 1. Travel set equipment 2. Industrial equipment 3. Office equipment 4. Kitchen equipment 5. Household electrical equipment 6. Power tools 5. Technical Parameter: Input: Input voltage: DC12V/DC24V/DC48V Working Voltage: DC10V-15V/DC20V-30V/DC40V-60V Input current: 83A/41.67A/20.83A Standby input power: 1200W Short circuit protection Digital display Indicator:  Inverter woking: green light on Inverter problem: no 110V/220v display Protection alarm:  Low input voltage alarm: buzzer Low input voltage protection: no display, buzzer and inverter stop working High input voltage protection: no output voltage display, have input display, inverter stop working. Over load protection: voltage drop to 55-140V Abnormal temperature: no AC display, buzzer and stop working. Environment: High temperature protectioin: =70ºC Working Temperature: -10ºC~40ºC Cooling mode: Intelligent Temperature control Fan Package included: 1* QW-P1000 (360*170*135mm/6kg) 1* battery clamp 1* spare part 1* english user manual 1* standard packing box -

Description The ROGER 2000W Pure Sine Wave Power Inverter is a high-quality solar accessory that is perfect for off-grid systems. A power inverter is an electrical device that transforms the DC power stored in batteries into standard household AC

6000 watt pure sine inverter The inverter transforms DC (direct current) power stored by batteries into AC (alternating current) electricity that can be used to power tools and appliances of all varieties. A built-in 50 amp transfer switch allows the product to automatically switch from using a battery bank to shore power. This is great in the event of a power outage, as the product will automatically detect the outage and redirect power from your backup battery bank. It also has a built-in 45 amp battery charger which uses AC power, from the grid or from a fuel-powered generator for example, that can be used to recharge a battery bank as well. The battery-type selector on the top of the unit allows the ability to adjust the voltage provided to the bank. url:http://www.rogerele.com

Key Features [full spec] ✔ Output Power: 0.85 KVA ✔ Voltage: 12 V ✔ Technology: Higher end Micro-Controller based design ✔ WaveForm: Pure Sine Wave ✔ Recharge Time: 4 Hr(s) ✔ Warranty: 2 Year(s) ✔ Features: Battery deep discharge protection, Fuzzy Logic Control a unique and advanced technology that protects the Battery, Higher end Micro Controller based design, Reduces Frequency of water Topping And Enhances Battery Life, Surface Mount Technology for PCB Cards, User Friendly Graphical Display with audible alerts 8.5 Kg

1.Main Features: a. Durable construction for long life under extreme environmental conditions b. Low idle current (less than 1 watt) conserves energy when no loads are present c. power Inverter has soft start capability for starting heavy loads d. Built-in starting control circuits for two- and three-wire generator starting systems e. Simplified controls with a snap-on cover that protects settings from being accidentally changed f. Better thermal performance allows full output power to 50¡ãC (122¡ãF) without de-rating g. High surge capacity starts more difficult loads and handles overload conditions reliably h. Durable powder coated, corrosion resistant steel chassis i. New digital display shows kilowatts (kW) when inverting and amps (A) when charging, plus incorporates a robust ON/OFF switch and status indicators j. 70-amp automatic three-stage battery charger (bulk, absorption, and float) and battery equalization with remote temperature sensor for increased performance. 2. Protection Features: A. Battery over voltage and under voltage protection B. Over temperature protecton C. Automatic overload protection D. Short circuit protection. F.pure sine wave inverter g. pure copper transformer h.1kw to 6kw available i. low frequency inverter j. huge charge current k. support solar system, generator.

Pure sine wave solar inverter Features: 1:Pure Sine Wave Output 2:Low consumption for only 0.5A when without load 3:With standby function 4:Can be used both for solar system and home. 5:Portable power for many power tools and various appliances, including vacuum cleaners, small refrigerators, TVs, and more 6:Great for autos, trucks, RVs, boats, camping, and more 7:Compact and lightweight 8:High efficiency í¦90% 9:Voltage overload protection 10:High output current surge 11:Low battery alarm/shutdown Payment Details: Payment Terms: Telegraphic Transfer (TT,T/T) Minimum Order: 1 to 99 Unit Delivery Details: FOB Port: Shenzhen Lead Time: 5 - 15 days Product Certificate: CE Standard export packing

SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, it's suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc. This Inverter is very suitable for solar power systems, wind power generation systems, wind and solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply. Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance. 4, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converterâ??s usage, which reduced the cost of equipment investment, easy to connect wires and control. 5, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%. 6, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 7, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 8, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 9, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy. 10, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.

1500W off grid power pure sine wave inverter P section What is power inverter? A power inverter, or inverter, is an electronic device or circuitry that changes direct current (DC) to alternating current (AC). The input voltage, output voltage and frequency, and overall power handling depend on the design of the specific device or circuitry. The inverter does not produce any power; the power is provided by the DC source.  Features: 1. Pure sine wave output. 2. Rated power range from 300W to 4000W. 3. 100% real power. 4. Fully electric protection: Low voltage alarm & Shutdown, over voltage, earth fault,short circuit,overload,soft start, over temperature, polarity reverse. 5. Customize DC input voltage range. 6. Can match remote controller to control power-on/off, cable length for 5meters. 7. Supply OEM brand service 8. Pure sine wave output, over 90% transfer efficiency. 9. USB function 5V 2.1A. Specification details: MODEL PQ-1500P Output AC Voltage 100-120V/220-240V AC Rated Power 1500W Surge Power 3000W Waveform Pure Sine Wave USB port 5V  2.1A 5V  2.1A 5V  2.1A 5V  2.1A Input DC Voltage 12VDC 24VDC 12VDC 24VDC Voltage Range 10.5~15VDC 21~30VDC 10.5~15VDC 21~30VDC Efficiency(Typ.) >90% Remote Control Function(optional) Protection BAT.Low Alarm 10.5±0.5VDC 21±1.0VDC 10.5±0.5VDC 21±1.0VDC BAT.LOW Shutdown 10±0.5VDC 20±1.0VDC 10±0.5VDC 20±1.0VDC Over Load Shut down output voltage, restart to recover Over Voltage 15.5±0.5VDC 31±1.0VDC 15.5±0.5VDC 31±1.0VDC Over Temperature Shut down output voltage, recover automatically after temperature goes down Output Short Shut down output voltage, restart to recover DC Input Reverse Polarity By fuse Earth Fault Shut off o/p when the load has electrical leakage Soft Start Yes,3~5 Seconds Remote control(Optional) Remot controller with 5m cable Dimension 32.5*25.2*10.1cm(L*W*H) N.W(KG) 4.3kG G.W(KG) 5.2kG Warranty 2years

2500W solar power system pure sine wave inverter P section What is power inverter? A power inverter, or inverter, is an electronic device or circuitry that changes direct current (DC) to alternating current (AC). The input voltage, output voltage and frequency, and overall power handling depend on the design of the specific device or circuitry. The inverter does not produce any power; the power is provided by the DC source.  Features: 1. Pure sine wave output. 2. Rated power range from 300W to 4000W. 3. 100% real power. 4. Fully electric protection: Low voltage alarm & Shutdown, over voltage, earth fault,short circuit,overload,soft start, over temperature, polarity reverse. 5. Customize DC input voltage range. 6. Can match remote controller to control power-on/off, cable length for 5meters. 7. Supply OEM brand service 8. Pure sine wave output, over 90% transfer efficiency. 9. USB function 5V 2.1A. Specification details: MODEL PQ-2500P Output AC Voltage 100-120V/220-240V AC Rated Power 2500W Surge Power 5000W Waveform Pure Sine Wave USB port 5V  2.1A 5V  2.1A 5V  2.1A 5V  2.1A Input DC Voltage 12VDC 24VDC 12VDC 24VDC Voltage Range 10.5~15VDC 21~30VDC 10.5~15VDC 21~30VDC Efficiency(Typ.) >90% Remote Control Function(optional) Protection BAT.Low Alarm 10.5±0.5VDC 21±1.0VDC 10.5±0.5VDC 21±1.0VDC BAT.LOW Shutdown 10±0.5VDC 20±1.0VDC 10±0.5VDC 20±1.0VDC Over Load Shut down output voltage, restart to recover Over Voltage 15.5±0.5VDC 31±1.0VDC 15.5±0.5VDC 31±1.0VDC Over Temperature Shut down output voltage, recover automatically after temperature goes down Output Short Shut down output voltage, restart to recover DC Input Reverse Polarity By fuse Earth Fault Shut off o/p when the load has electrical leakage Soft Start Yes,3~5 Seconds Remote control(Optional) Remot controller with 5m cable Dimension 45*25.2*10.1cm(L*W*H) N.W(KG) 6.3kG G.W(KG) 7.3kG Warranty 2years