Two-component air-drying polyurethane based primer containing zinc phosphate as anti corrosive pigment.
Recommended Use :-
It is recommended as a primer for MS surface in OEM applications as well as in Process industries like fertilizer plants, Refineries, Petrochemical industries for protection of steel pipelines and structural from corrosion.
Physical Data :-
COLOUR : Red
FINISH : Matt
SOLIDS BY VOLUME : 40 �± 3%
THEORETICAL SPREADING RATE : 13.33 sq.mt / lit at recommended DFT of 30 �µ
FLASH POINT : Base : Above 23�° C Hardener : Above 30�° C
DRYING CHARACTERISTICS (At 30�° C and 65% Relative humidity) : SURFACE DRY : 30 minutes HARD DRY : Overnight FULL CURE : 7 Days
SHELF LIFE : BASE : 6months HARDENER : 6 months
Surface Preparation
Abrasive blasting to Sa 21/2 Swedish Standards is the best method of surface preparation. In case blasting is not possible, then the surface of steel should be manually cleaned with brass wire brush, coarse emery paper, scraper, etc to remove rust, dust, loose old coating, oil, grease, and other foreign contaminants. It is preferable to give a solvent wipe after surface preparation. The surface should be absolutely dry, moisture and oil free before primer application or Phosphated components by 7-tank pretreatment process of surface preparation.
Application Data :-
MIXING RATIO : Base : Hardener (As per our recommendation)
APPLICATION : By Brush / By Conventional Spray
THINNER : Type 290
POT LIFE : 3 hours min at 30�° C
RECOMMENDED DFT : 30-40 �µ.
OVERCOATING INTERVAL : MIN : 8 hours MAX :24 hours (if it exceeds, the surface should be roughened by emery scuffing grade 320)
COMPATIBILITY : Can be top coated with Epoxy, Polyurethane, Chlorinated rubber and Alkyd finish coatings.
Two-component air-drying polyurethane based primer containing zinc phosphate as anti corrosive pigment.
Recommended Use :-
It is recommended as a primer for MS surface in OEM applications as well as in Process industries like fertilizer plants, Refineries, Petrochemical industries for protection of steel pipelines and structural from corrosion.
Physical Data
COLOUR : Red
FINISH : Matt
SOLIDS BY VOLUME : 40 �± 3%
THEORETICAL SPREADING RATE : 13.33 sq.mt / lit at recommended DFT of 30 �µ
FLASH POINT : Base : Above 23�° C Hardener : Above 30�° C
DRYING CHARACTERISTICS (At 30�° C and 65% Relative humidity) : SURFACE DRY : 30 minutes HARD DRY : Overnight FULL CURE : 7 Days
SHELF LIFE : BASE : 6months HARDENER : 6 months
Surface Preparation
Abrasive blasting to Sa 21/2 Swedish Standards is the best method of surface preparation. In case blasting is not possible, then the surface of steel should be manually cleaned with brass wire brush, coarse emery paper, scraper, etc to remove rust, dust, loose old coating, oil, grease, and other foreign contaminants. It is preferable to give a solvent wipe after surface preparation. The surface should be absolutely dry, moisture and oil free before primer application or Phosphated components by 7-tank pretreatment process of surface preparation.
Application Data :-
MIXING RATIO : Base : Hardener (As per our recommendation)
APPLICATION : By Brush / By Conventional Spray
THINNER : Type 290
POT LIFE : 3 hours min at 30�° C
RECOMMENDED DFT : 30-40 �µ.
OVERCOATING INTERVAL : MIN : 8 hours MAX : 24 hours (if it exceeds, the surface should be roughened by emery scuffing grade 320)
COMPATIBILITY : Can be top coated with Epoxy, Polyurethane, Chlorinated rubber and Alkyd finish coatings.
Two-component air-drying polyurethane based primer containing zinc phosphate as anti corrosive pigment.
Recommended Use :-
It is recommended as a primer for MS surface in OEM applications as well as in Process industries like fertilizer plants, Refineries, Petrochemical industries for protection of steel pipelines and structural from corrosion.
Physical Data
COLOUR : Grey
FINISH : Matt
SOLIDS BY VOLUME : 40 �± 3%
THEORETICAL SPREADING RATE : 13.33 sq.mt / lit at recommended DFT of 30 �µ
FLASH POINT : Base : Above 23�° C Hardener : Above 30�° C
DRYING CHARACTERISTICS (At 30�° C and 65% Relative humidity) : SURFACE DRY : 30 minutes HARD DRY : Overnight FULL CURE : 7 Days
SHELF LIFE : BASE : 6months HARDENER : 6 months
Surface Preparation
Abrasive blasting to Sa 21/2 Swedish Standards is the best method of surface preparation. In case blasting is not possible, then the surface of steel should be manually cleaned with brass wire brush, coarse emery paper, scraper, etc to remove rust, dust, loose old coating, oil, grease, and other foreign contaminants. It is preferable to give a solvent wipe after surface preparation. The surface should be absolutely dry, moisture and oil free before primer application or Phosphated components by 7-tank pretreatment process of surface preparation.
Application Data
MIXING RATIO : Base : Hardener (As per our recommendation)
APPLICATION : By Brush / By Conventional Spray
THINNER : Thinner 290
POT LIFE : 3 hours min at 30�° C
RECOMMENDED DFT : 30-40 �µ.
OVERCOATING INTERVAL : MIN : 8 hours MAX :24 hours (if it exceeds, the surface should be roughened by emery scuffing grade 320)
COMPATIBILITY : Can be top coated with Epoxy, Polyurethane, Chlorinated rubber and Alkyd finish coatings.
Cold Brands Hot Brands
Reactive Yellow 86 Reactive Yellow 18
Reactive Yellow 22 Reactive Orange 12
Reactive Orange 14 Reactive Orange 13
Reactive Orange 4 Reactive Red 21a
Reactive Red 2 Reactive Red 22
Reactive Red 11 Reactive Red 23
Reactive Blue Mx7rx(Mix) Reactive Red 24
Vinyl Sulphone Base Reactive Red 31
Reactive Yellow 160 Reactive Red 45
Reactive Yellow 15 Reactive Scarlet P2r(Mix)
Reactive Yellow 42 Reactive Blue 13
Reactive Orange 107 Reactive Blue 49
Reactive Orange 96 High Exhaust
Reactive Orange 78 Reactive Yellow 84
Reactive Orange 16 Reactive Orange 84
Reactive Red 245 Reactive Red 141
Reactive Red 111 Reactive Blue 171
Reactive Blue 28 Reactive Green 19
Reactive Blue 21 Bi - Functional
Reactive Blue 89 Reactive Orange 145a
Reactive Blue 250 Reactive Orange 122
Reactive Blue 203 Reactive Red 195a
Reactive Violet 5 Reactive Red 198a
Reactive Black 5 Reactive Red 222
Reactive Black 5 Reactive Red 223
Reactive Black 5 Reactive Red 249
Reactive Black Vn (Mix) Reactive Red 250
Reactive Black Hfgr-p(Mix) Reactive Red 180a
Reactive Black Wnn(Mix) Reactive Blue 194
Reactive Super Black R(Mix) Reactive Blue 220
Rr - Series Reactive Blue 221
Reactive Red Rr Reactive Blue 222
Reactive Blue Rr Reactive Black Bfgrf(Mix)
Reactive Yellow Rr Reactive Red 114
R/o Salt Free Dyes For Ink Application
Reactive Yellow 145 Reactive Red 195
Reactive Red 31 Reactive Red 198
Reactive Red 111 Reactive Red 223
Reactive Red 120 Reactive Red 245
Reactive Red 141 Reactive Orange 12
Reactive Red 152 Reactive Black 5
An easy-to-use, water-based primer specifically formulated to �¢??lock-out�¢?? corrosion on a wide range of metals. Applied correctly, is guaranteed for years.
USES
Suitable on sheet metal, castings, wrought iron, TNT Bar, steel Bar and steelwork. This product is not recommended for automotive use.
COLOURS
Available in natural green.
SIZES
Available in 4 litre,10 litre and 20 litre
COVERAGE
Up to 14 square metres per litre depending upon surface porosity and application method.
APPLICATION
Roller, brush, dip or airless spray. Provide adequate ventilation during use.
DRYING TIMES
Touch Dry Time - 20 minutes. Recoat Dry Time - 2 hours. Drying times refer to normal conditions (30�?�°C, 50% humidity). Under cooler, humid or still conditions, longer drying times may be necessary. DO NOT USE IN TEMPERATURES BELOW 10'c OR ABOVE 45C.
DANGEROUS GOODS CLASSIFICATION
Not classified as Dangerous Goods.
SURFACE PREPERATION
Previously Painted Surfaces :
Scrape off loose and flaking paint and make sure the remainder is firmly attached. Sand glossy surfaces and enamels thoroughly and wipe clean. Remove all rust by abrasive blasting or mechanical sanding. Treat any remaining rust. Prime treated and bare areas with one coat SAFFRO Anti-Corrosive Metal Primer. In highly corrosive environments or within 2 kilometre of the sea, apply 2 coats of SAFFRO Anti- Corrosive Metal Primer.
TNT BAR,STEEL BAR AND IRON:
Remove all grease, dirt and other surface contaminants.Remove all rust by abrasive blasting or mechanical sanding. Treat any remaining rust with. Prime treated and bare areas with one coat SAFFRO Anti-Corrosive Metal Primer. In highly corrosive environments or within 2 kilometre of the sea, apply 2 coats of SAFFRO Anti- Corrosive Metal Primer
884 Pu R O Z P Anti Corrosive Primer Suppliers
Short on time? Let Pu R O Z P Anti Corrosive Primer sellers contact you.
Two-component air-drying polyurethane based primer containing zinc phosphate as anti corrosive pigment.
Recommended Use :-
It is recommended as a primer for MS surface in OEM applications as well as in Process industries like fertilizer plants, Refineries, Petrochemical industries for protection of steel pipelines and structural from corrosion.
Physical Data :-
COLOUR :- Yellow
FINISH :- Matt
SOLIDS BY VOLUME :- 40 �± 3%
THEORETICAL SPREADING RATE :- 13.33 sq.mt / lit at recommended DFT of 30 �µ
FLASH POINT :- Base : Above 23�° C Hardener : Above 30�° C
DRYING CHARACTERISTICS (At 30�° C and 65% Relative humidity) :- SURFACE DRY : 30 minutes HARD DRY : Overnight FULL CURE : 7 Days
SHELF LIFE :- BASE : 6months HARDENER : 6 months
Surface Preparation
Abrasive blasting to Sa 21/2 Swedish Standards is the best method of surface preparation. In case blasting is not possible, then the surface of steel should be manually cleaned with brass wire brush, coarse emery paper, scraper, etc to remove rust, dust, loose old coating, oil, grease, and other foreign contaminants. It is preferable to give a solvent wipe after surface preparation. The surface should be absolutely dry, moisture and oil free before primer application or Phosphated components by 7-tank pretreatment process of surface preparation.
Application Data
MIXING RATIO :- Base : Hardener (As per our recommendation)
APPLICATION :- By Brush / By Conventional Spray
THINNER :- Type 290
POT LIFE :- 3 hours min at 30�° C
RECOMMENDED DFT :- 30-40 �µ.
OVERCOATING INTERVAL :- MIN : 8 hours MAX :24 hours (if it exceeds, the surface should be roughened by emery scuffing grade 320)
COMPATIBILITY :- Can be top coated with Epoxy, Polyurethane, Chlorinated rubber and Alkyd finish coatings.
Application Method
Stir the Base part thoroughly. Mix the base and hardener as per our recommended ratio, by volume. Stir the mix gently to attain homogeneity. Add Thinner Type 290 into the mix, if required, depending on application method, and stir gently for few minutes. Allow the mixture to stand still (maturation) for about 10-15 minutes to initiate the reaction. Strain the paint through Nylon filter cloth of 200 mesh size and apply uniformly over the surface. All equipments used for above should be properly clean.
Application :- By Brush / By Conventional Spray / By Airless Spray
Generally no thinner is required for Brush application, however under adverse environmental conditions about 5% of thinner, by volume, can be added. Apply evenly in crossed manner and ensuring the uniform application. Use quality brushes for paint application.
For Conventional Spray application :-
Thinner : Type 290
Addition : 10-15%
Nozzle Orifice : 1.2 -1.4 mm
Nozzle Pressure : 40-70 p.s.i.
For Airless Spray application :-
Thinner : Type 290
Addition : Max 5%
Nozzle Orifice : 0.28- 0.37 mm
Nozzle Pressure : 1400-1800 p.s.i.
Safety Features
Abrasion Resistant
Anti Skid
Light Weight
Oil Resistant
Overview
Product Name : Volkan Shoe
Sizes : 5 - 11
STANDARD FEATURES
Abrasion Resistant
Anti Skid
Anti Static
Cushionong Effect
DIP PU Construction
High Flexing
Light Weight
Odour Free
Oil and Acid Resistant
Sweat Absorption
Optional Features
High Voltage Insulation
Boot Care
* Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents.
* When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage.
* To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort.
* The shoe should be used for the purpose for which it has been designed.
Some facts about feet-
* Most of the muscles are in your feet. Thus you should wear comfortable shoes.
* The body temperature is regulated through your feet
* Maximum number of nerves go through your feet.
100% Comfort Guaranteed
* Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free.
* Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort.
* Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort.
* Cushioned Insoles providing better comfort.
* Shock absorbing PU midsole with low density providing uniform cushioning and comfort.
* Light Weight PU for a featherlite feel even during high stress working conditions.
SAFETY FEATURES
Abrasion Resistant
Acid Resistant
Anti Static Insole
Excellent Shock Absorber
Fine Leather
Light Weight
Oil Resistant
Slip Resistant Sole
Steel toe / Kavlar
Steel Toe Cap
ADDITIONAL PRODUCT INFO
OVERVIEW
Product Name : Gents Safety Boots
Standard : S3
Sizes : 36 - 47 (5-13)
Colors : Brown/black
AVAILABLE OPTIONS
Product Number : 3002-02 PU/Rubber
Standard : S1,s1p,s2,s3
Toe: Fibre Glass/steel
Midsole: Steel/kevlar
Sole : DD PU/Rubber
Color: Brown & Black
MATERIALS
Upper: Water Resistant Buff Printed Leather
Lining: Camberella - 100% Camberella Polymide,breathable,absorbing And Relaxing Moisture
Toe : Fibre Glass
Midsole : Kevlar
Footbed / Socks: Moulded Antistatic
Sole : 3002- PU Rubber
Certified : EN ISO 20345:2011 SRA
BOOT CARE
* Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents.
* When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage.
* To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort.
* The shoe should be used for the purpose for which it has been designed.
Some facts about feet-
* Most of the muscles are in your feet. Thus you should wear comfortable shoes.
* The body temperature is regulated through your feet
* Maximum number of nerves go through your feet.
100% COMFORT GUARANTEED
* Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free.
* Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort.
* Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort.
* Cushioned Insoles providing better comfort.
* Shock absorbing PU midsole with low density providing uniform cushioning and comfort.
* Light Weight PU for a featherlite feel even during high stress working conditions.
SAFETY FEATURES
Oil Resistant
Light Weight
Anti Static Insole
Anti Skid
Abrasion Resistant
OVERVIEW
Product Name : Jungle Boot
Sizes : 35 - 42 (5-10)
Colors : Olive Green
Standard Features
Abrasion Resistant
Anti Skid
Anti Static
Cushionong Effect
DIP PU Construction
European Standard Steel Toecap
Extra Ankle Protection
High Flexing
Light Weight
Odour Free
Oil and Acid Resistant
Sweat Absorption
Industry
Defence and Security
Boot Care
* Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents.
* When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage.
* To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort.
* The shoe should be used for the purpose for which it has been designed.
Some facts about feet-
* Most of the muscles are in your feet. Thus you should wear comfortable shoes.
* The body temperature is regulated through your feet
* Maximum number of nerves go through your feet.
100% Comfort Guaranteed
* Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free.
* Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort.
* Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort.
* Cushioned Insoles providing better comfort.
* Shock absorbing PU midsole with low density providing uniform cushioning and comfort.
* Light Weight PU for a featherlite feel even during high stress working conditions.
SAFETY FEATURES
Abrasion Resistant
Anti Skid
Anti Static Insole
Breathable
Fine Leather
Heat Resistant Sole
Light Weight
Oil Resistant
Shock Absorber
Steel Midsole
Steel Toe Cap
Water Proof
ADDITIONAL PRODUCT INFO
OVERVIEW
Product Name : Gents Safety Shoes
Standard : S3 SRC
Sizes : 36 - 47 (5-13)
Colors : Black
AVAILABLE OPTIONS
Product Number : 3002 - 229
Standard : S1, S1P, S2, S3
Toe: Steel /Fibre Glass
Midsole : Steel/Metal Free
Sole : Dual / Mono
Color : Black /brown
MATERIALS
Upper : Suedo and Microfibre
Lining : Textile
Toe : Steel
Midsole : Steel
Footbed / Socks : Moulded
Sole : PU/PU
Certified : EN ISO 20345:2011 SRA
BOOT CARE
* Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents.
* When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage.
* To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort.
* The shoe should be used for the purpose for which it has been designed.
Some facts about feet-
* Most of the muscles are in your feet. Thus you should wear comfortable shoes.
* The body temperature is regulated through your feet
* Maximum number of nerves go through your feet.
100% COMFORT GUARANTEED
* Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free.
* Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort.
* Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort.
* Cushioned Insoles providing better comfort.
* Shock absorbing PU midsole with low density providing uniform cushioning and comfort.
* Light Weight PU for a featherlite feel even during high stress working conditions.
Safety Features
Anti Skid
Anti Static Insole
Oil Resistant
Shock Absorber
Steel Toe Cap
Overview
Product Name : Safety Shoe
Sizes : 36 - 48
Colors : Black
Industry
Automobile
Aviation
Construction and Infrastructure
Defence and Security
Engineering and Manufacturing
Hospitality
Mining and Petroleum
Pharmaceutical
Railways
Boot Care
* Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents.
* When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage.
* To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort.
* The shoe should be used for the purpose for which it has been designed.
Some facts about feet-
* Most of the muscles are in your feet. Thus you should wear comfortable shoes.
* The body temperature is regulated through your feet
* Maximum number of nerves go through your feet.
100% Comfort Guaranteed
* Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free.
* Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort.
* Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort.
* Cushioned Insoles providing better comfort.
* Shock absorbing PU midsole with low density providing uniform cushioning and comfort.
* Light Weight PU for a featherlite feel even during high stress working conditions
Standard Features
Abrasion Resistant
Anti Skid
Anti Static
Genuine Leather
Industry
Automobile
Aviation
Chemical And Fertilizer
Construction and Infrastructure
Defence and Security
Engineering and Manufacturing
Hospitality
Mining and Petroleum
Pharmaceutical
Power
Railways
Semiconductor and Electronic
Steel
Boot Care
* Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents.
* When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage.
* To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide
optimum levels of protection and comfort.
* The shoe should be used for the purpose for which it has been designed.
Some facts about feet-
* Most of the muscles are in your feet. Thus you should wear comfortable shoes.
* The body temperature is regulated through your feet
* Maximum number of nerves go through your feet.
100% Comfort Guaranteed
* Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free.
* Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort.
* Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort.
* Cushioned Insoles providing better comfort.
* Shock absorbing PU midsole with low density providing uniform cushioning and comfort.
* Light Weight PU for a featherlite feel even during high stress working conditions.
Safety Features
Abrasion Resistant
Anti Skid
Light Weight
Oil Resistant
Overview
Product Name : Combat Boot
Sizes : 5 - 14
Colors : Black
Standard Features
Anti Skid
Anti Static
Cushionong Effect
Extra Ankle Protection
Genuine Soft Leather
High Flexing
Light Weight
Oil and Acid Resistant
PU Rubber Sole
Optional Features
High Voltage Insulation
Boot Care
* Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents.
* When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage.
* To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort.
* The shoe should be used for the purpose for which it has been designed.
Some facts about feet-
* Most of the muscles are in your feet. Thus you should wear comfortable shoes.
* The body temperature is regulated through your feet
* Maximum number of nerves go through your feet.
100% Comfort Guaranteed
* Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free.
* Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort.
* Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort.
* Cushioned Insoles providing better comfort.
* Shock absorbing PU midsole with low density providing uniform cushioning and comfort.
* Light Weight PU for a featherlite feel even during high stress working conditions.
SAFETY FEATURES
Abrasion Resistant
Acid Resistant
Anti Static Insole
Excellent Shock Absorber
Fine Leather
Light Weight
Oil Resistant
Slip Resistant Sole
Steel toe / Kavlar
Steel Toe Cap
ADDITIONAL PRODUCT INFO
OVERVIEW
Product Name : Gents Safety Boot
Standard : S3
Sizes : 36 - 47 (5-13)
Colors : Brown
AVAILABLE OPTIONS
Product Number : 3002-02
Standard : S1, S1P, S2, S3
Toe : Steel /Fibre Glass
Midsole : Steel/Metal Free
Sole : Dual
Color : Black / Brown
MATERIALS
Upper : Buff Barton Printed Din Leather +PU Coated Synthetic on Collar and Tongue
Lining : Cambrella
Toe : Fibre Glass Toe
Midsole : Kevlar
Footbed / Socks : Moulded Antistatic
Sole : 3002 Double Density PU /RUBBER
Certified : EN ISO 20345:2011 SRA
BOOT CARE
* Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents.
* When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage.
* To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort.
* The shoe should be used for the purpose for which it has been designed.
Some facts about feet-
* Most of the muscles are in your feet. Thus you should wear comfortable shoes.
* The body temperature is regulated through your feet
* Maximum number of nerves go through your feet.
100% COMFORT GUARANTEED
* Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free.
* Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort.
* Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort.
* Cushioned Insoles providing better comfort.
* Shock absorbing PU midsole with low density providing uniform cushioning and comfort.
* Light Weight PU for a featherlite feel even during high stress working conditions.
SAFETY FEATURES
Steel Toe Cap
Oil Resistant
Shock Absorber
Anti Static Insole
Anti Skid
ADDITIONAL PRODUCT INFO
OVERVIEW
Product Name : Safety Shoe
Standard : S1
Sizes : 36-47 (5-13)
Colors : D Grey
AVAILABLE OPTIONS
Product Number : 2080-68
Standard : S1, S1P, S2, S3
Toe : Steel
Midsole : Steel
Sole : Dual Or Mono
Color : D Grey / Blue / Tan
MATERIALS
Upper : Water Repellant Nubuck, Suede and Breathable Textile
Lining : Textile, Breathable, Absorbs and Release moisture, Abrasion Resistant
Toe : Steel
Footbed / Socks : Padded Antistatic
Sole : 2080 Dual Density PU
Certified : EN ISO 20345: 2011
BOOT CARE
* Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents.
* When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage.
* To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort.
* The shoe should be used for the purpose for which it has been designed.
Some facts about feet-
* Most of the muscles are in your feet. Thus you should wear comfortable shoes.
* The body temperature is regulated through your feet
* Maximum number of nerves go through your feet.
100% COMFORT GUARANTEED
* Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free.
* Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort.
* Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort.
* Cushioned Insoles providing better comfort.
* Shock absorbing PU midsole with low density providing uniform cushioning and comfort.
* Light Weight PU for a featherlite feel even during high stress working conditions.
SAFETY FEATURES
Anti Skid
Anti Static Insole
Oil Resistant
Shock Absorber
Steel Toe Cap
ADDITIONAL PRODUCT INFO
OVERVIEW
Product Name : Safety Boot
Standard : S1
Sizes : 36 - 47 (5-13)
Colors : Grey
AVAILABLE OPTIONS
Product Number : 2080 - 150
Standard : S1, S1P, S2, S3
Toe : Steel
Midsole : Steel
Sole : Dual or Mono
Color : As Per Pic
MATERIALS
Upper : Water Repellant Nubuck, Suede and Breathable Textile
Lining : Textile, Breathable, Abdosrbs and Release moisture, Abrasion Resistant
Toe : Steel
Footbed / Socks : Moulded Cambrella and EVA. Antistatic
Sole : 2080 Dual Density PU
Certified : EN ISO 20345: 2011
BOOT CARE
* Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents.
* When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage.
* To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort.
* The shoe should be used for the purpose for which it has been designed.
Some facts about feet-
* Most of the muscles are in your feet. Thus you should wear comfortable shoes.
* The body temperature is regulated through your feet
* Maximum number of nerves go through your feet.
100% COMFORT GUARANTEED
* Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free.
* Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort.
* Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort.
* Cushioned Insoles providing better comfort.
* Shock absorbing PU midsole with low density providing uniform cushioning and comfort.
* Light Weight PU for a featherlite feel even during high stress working conditions.
SAFETY FEATURES
Anti Skid
Anti Static Insole
Heat Resistant Sole
Oil Resistant
Shock Absorber
Steel Toe Cap
ADDITIONAL PRODUCT INFO
OVERVIEW
Product Name: Safety Shoe
Standard : S1
Sizes : 36 - 48
Colors : Green
AVAILABLE OPTIONS
Product Number : 3003-98
Standard : S1, S1P, S2, S3
Toe : Steel / Composite
Midsole : Steel / Metal Free
Sole : Dual Or Mono
Color : As per pic
MATERIALS
Upper : Water Reppellant Suede, Smooth Leather and Mesh
Lining : Textile, Breathable, Absorbs and Release moisture, Abrasion Resistant
Toe : Steel
Footbed / Socks : Moulded Cambrella and EVA. Antistatic
Sole : 3003 Dual Density PU
Certified : EN ISO 20345: 2011
BOOT CARE
* Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents.
* When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage.
* To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort.
* The shoe should be used for the purpose for which it has been designed.
Some facts about feet-
* Most of the muscles are in your feet. Thus you should wear comfortable shoes.
* The body temperature is regulated through your feet
* Maximum number of nerves go through your feet.
100% COMFORT GUARANTEED
* Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free.
* Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort.
* Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort.
* Cushioned Insoles providing better comfort.
* Shock absorbing PU midsole with low density providing uniform cushioning and comfort.
* Light Weight PU for a featherlite feel even during high stress working conditions.
SAFETY FEATURES
Anti Skid
Anti Static Insole
Heat Resistant Sole
Oil Resistant
Shock Absorber
Steel Toe Cap
ADDITIONAL PRODUCT INFO
OVERVIEW
Product Name: Safety shoe
Standard : S1
Sizes : 36 - 48
ColorS: Tan
AVAILABLE OPTIONS
Product Number : 3003-99
Standard : S1, S1P, S2, S3
Toe : Steel / Composite
Midsole : Steel / Metal Free
Sole : Dual or Mono
Color : As Per Pic
MATERIALS
Upper : Water Reppellant Nubuck, Helcore and Cordura
Lining : Textile, Breathable, Absorbs and Release moisture, Abrasion Resistant
Toe : Steel
Footbed / Socks : Moulded Cambrella and EVA. Antistatic
Sole : 3003 Dual Density PU
Certified : EN ISO 20345: 2011
BOOT CARE
* Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents.
* When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage.
* To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort.
* The shoe should be used for the purpose for which it has been designed.
Some facts about feet-
* Most of the muscles are in your feet. Thus you should wear comfortable shoes.
* The body temperature is regulated through your feet
* Maximum number of nerves go through your feet.
100% COMFORT GUARANTEED
* Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free.
* Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort.
* Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort.
* Cushioned Insoles providing better comfort.
* Shock absorbing PU midsole with low density providing uniform cushioning and comfort.
* Light Weight PU for a featherlite feel even during high stress working conditions.
SAFETY FEATURES
Anti Skid
Anti Static Insole
Heat Resistant Sole
Oil Resistant
Shock Absorber
ADDITIONAL PRODUCT INFO
OVERVIEW
Product Name : Safety Shoe
Standard : S1
Sizes : 36 - 47 (5-13)
Colors : Blue
AVAILABLE OPTIONS
Product Number : 3002-75
Standard : S1, S1P, S2, S3
Toe : Steel /Composite
Midsole : Steel /Metal Free
Sole : Dual or Mono
Color : As per pic
MATERIALS
Upper : Water Reppllant Soft Smooth and Suede Learher , Mesh and Reflector
Lining : Textile, Breathable, Absorbs and Release moisture, Abrasion Resistant
Toe : Steel
Footbed / Socks : Moulded Cambrella and EVA. Antistatic
Sole : 3002 Dual Density PU
Certified : EN ISO 20345: 2011
BOOT CARE
* Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents.
* When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage.
* To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort.
* The shoe should be used for the purpose for which it has been designed.
Some facts about feet-
* Most of the muscles are in your feet. Thus you should wear comfortable shoes.
* The body temperature is regulated through your feet
*Maximum number of nerves go through your feet.
100% COMFORT GUARANTEED
* Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free.
* Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort.
* Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort.
* Cushioned Insoles providing better comfort.
* Shock absorbing PU midsole with low density providing uniform cushioning and comfort.
* Light Weight PU for a featherlite feel even during high stress working conditions.
SAFETY FEATURES
Anti Skid
Anti Static Insole
Oil Resistant
Shock Absorber
Steel Midsole
Steel Toe Cap
Water Proof
ADDITIONAL PRODUCT INFO
OVERVIEW
Product Name : Safety Shoe
Standard : S3
Sizes : 36 - 48
Colors : Black
AVAILABLE OPTIONS
Product Number : 3003 - 25
Standard : S1, S1P, S2, S3
Toe : Steel / Composite
Midsole : Steel / Metal Free
Sole : Dual or Mono
Color : Black / Brown
MATERIALS
Upper : Water Resistant Suede and Cordura
Lining : 3D Textile, Breathable, Ensures good Ventilation and greater comfort
Toe : Composite
Midsole : Non Metallic -Zero Penetration
Footbed / Socks : Cambrella and EVA Antistatic
Sole : 3003 Dual Density PU
Certified : EN ISO 20345: 2011
BOOT CARE
* Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents.
* When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage.
* To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort.
* The shoe should be used for the purpose for which it has been designed.
Some facts about feet-
* Most of the muscles are in your feet. Thus you should wear comfortable shoes.
* The body temperature is regulated through your feet
* Maximum number of nerves go through your feet.
100% COMFORT GUARANTEED
* Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free.
* Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort.
* Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort.
* Cushioned Insoles providing better comfort.
* Shock absorbing PU midsole with low density providing uniform cushioning and comfort.
* Light Weight PU for a featherlite feel even during high stress working conditions.
884 Pu R O Z P Anti Corrosive Primer Suppliers
Short on time? Let Pu R O Z P Anti Corrosive Primer sellers contact you.
