Protek KOR-CHEM PROTEK SafeHand Rub 60 ml
Protek KOR-CHEM PROTEK SafeHand Rub Quick Dry Hand Sanitizer 60 ml
Protek KOR-CHEM PROTEK SafeHand Rub 80 ml
Protek KOR-CHEM PROTEK SafeHand Rub Quick Dry Hand Sanitizer 80 ml
Protek KOR-CHEM PROTEK SafeHand Rub Quick Dry Hand Sanitizer 500 ml
This car shampoo is a biodegradable new high foam formula that remove tough dirts, road grimes and contaminants. Perfect for all type of paints including clear coats. It gently rinses, leaving a brilliant shine, repels water while leaving a dry surface with an excellent shine to your car without the use of any additional waxes or polish. It is very suitable to be use on all type of vehicles including commercial buses, vans, lorries etc as it has a rich advanced formula that will easily wash off the toughest dirts while uplifting the paint of your car with an excellent shine. Product attributes: -gently foam away dirts -excellent suds -sodium chloride free formula -leaves a brilliant shine -2 in 1 formula wash & shine -biodegradable formula -repels water Product specifications: Appearance: hazy white viscous liquid P.H: 7.0 - 8.5 Viscosity: 1000 - 2500 mpas Solubility: 100 % Usage: Rinse the surface of your vehicle with water, dilute 30 - 60 ml (1 to 2 caps) in a bucket and add 2.5l of water. Mix the water so as to disperse the car shampoo liquid. Apply with on cold surfaces of your car with a sponge and clean by rubbing. Rinse with clear water to remove any suds and foam after every wash. Attention: Keep out of reach of children. Avoid contact with the eyes. 1l bottle 5l gallon 25l pail 200l drum 1000l ibc tank
Category - Alcohol Based Sanitizer Ingredients - -Denatured Ethyl Alcohol -Isopropyl Alcohol IP -Alpha Tocopheryl Acetate -Brilliant Blue (-) -Purified Water IP (qs) HSN Code - 3402 Size - 100 ml Short Specification - 1.Alcohol-based, Rub-in Hand Disinfectant and Sanitizer 2.Effective against 99.9% Germs, Viruses and Bacteria 3.World Health Organisation (WHO) recommended hand-rub formulation Very good skin tolerability and replenishing properties 4.ready to use, does not require any water, or towel drying. Brand Name - Cycean Product Code - CHHR100BCPCL Country of Origin - india Product Description - 1.Alcohol-based, Rub-in Hand Disinfectant and Sanitizer 2.Effective against 99.9% Germs, Viruses and Bacteria 3.World Health Organisation (WHO) recommended handrub formulation Very good skin tolerability and replenishing properties 4.ready to use, does not require any water, or towel drying. Minimum Order Size - 5000 piece Packaging details - 60/box
Category - Alcohol Based Sanitizer Ingredients - Denatured Ethyl Alcohol -Isopropyl Alcohol IP -Chlorhexidine Gluconate Solution -Alpha Tocopheryl Acetate IP -Brilliant Blue (-) '-Purified Water (-qs) HSN Code - 3402 Size - 100 ml Short Spec ification - 1.kills 99.9% germs without the use of soap & water 2.for regular hand cleaning inside your home, office and in public places, especially before consuming food & eatables and after coming in contact with any external surface, pet or a person. 3.World Health Organisation (WHO) recommended hand-rub formulation Brand Name - Cyclean Product Code - CHHS100BCPDL Country of Origin - india Product Description - 1.kills 99.9% germs without the use of soap & water 2.for regular hand cleaning inside your home, office and in public places, especially before consuming food & eatables and after coming in contact with any external surface, pet or a person. 3.World Health Organisation (WHO) recommended handrub formulation Minimum Order Size - 5000 piece Packaging details - 60/box
Home vacuum cleaners.
General Features Kills 99.99% of viruses Fully CE-certified and FDA-cleared Meets the requirements set by various relevant European standards Packaging: 10 per package Available options: the 500ml Gel Pump Bottle or the 50ml Flip Top Bottle Ingredients Aqua(water) Ethanol (75%) Stabilising agents Moisturising agents Fragnance Meets many European standards EN 1500 (hygienic handrub) EN 12791 (surgical hand disinfection) Two elastic headbands for a more secure mask-adjustment EN 1040 (bactericidal) EN 14348 (mycobactericidal) EN 14476 (virucidal) EN 1275 (fungicidal, yeasticidal) Kills 99.99% of viruses Our unique formula efficiently gets rid of bacteria and viruses which have accumulated on your hands during your everyday activities. The stabilizing agents prevent the alcohol from evaporating too quickly, allowing it to completely disintegrate practically any infectious pathogen. Ethanol (75%) Centers for Disease Control and Prevention (CDC) recommend the use of alcohol-based handrubs (ABHR) that have more than 60% ethanol. We have found that 75% of ethanol is an ideally levelled out amount for your protection. Less than 75% would mean the sanitizer wouldnâ??t be effective against some pathogens, while more than 75% would make the alcohol evaporate too quickly, lowering its cleansing efficiency. 100% compliant with regulations (CE-certified, FDA-cleared, EN 1500, EN 12791, and other) The Vannin Medical Hand Sanitizers fully CE-certified, being in compliance with the regulations specified by the Medical Device Directive 93/42/EEC. The FDA has formally cleared our Sanitizer as consistently meeting their set of requirements. Check the abovementioned list of met European standards to find out which apply to our product. Please note that if you need reassurance regarding the certification of our products, we are willing to send you the copies of the relevant documents upon request! Moisturizing agents and fragrance Our hygienic handrubs is not only efficient when it comes to disinfecting, but it provides ample skincare for your hands as well. We have added superb moisturizing agents to soothe your skin after every use, and combined it with a soft fragrance to make each application more pleasant. How to use For best results, apply the Sanitiser generously to your hands, rubbing it in prescribed hand-washing motions. Make sure you cover your hands entirely, even between the fingers, and around and below the fingernails. Apply the sanitiser consistently for at least 30 seconds. Please note that if your hands are visibly dirty, it is best you wash them before applying the handrub. Choose the size: the 500ml Gel Pump Bottle or the 50ml Flip Top Bottle The 500ml Gel Pump Bottle Our 500ml bottle was especially designed for quick and convenient use to make health care come easy. The practical gel pump encourages frequent use which is perfect for any business, hospital, clinic, or school where proper hygiene is valued. The 50ml Flip Top Bottle The Flip Top Bottle is ideal for any situation where soap and water arenâ??t readily available. When youâ??re travelling, simply waiting in line, or unable to leave your desk, you are more likely to unconsciously touch your face. In order to prevent getting infected at those moments, use our convenient 50 ml Flip Top Bottle.
DISINFECTANT SANITIZING HAND WASH Colour : Green Appearance : Clear Liquid pH : 6.5 - 7.5 Specific gravity@ 25 deg C : 0.95 - 1.05 GMs/cm3 Usage : Apply small amount on wet hand, lather and rinse Active ingredient : Chlorhexidine Gluconate Base : Surfactant hand wash Pack size : 5 L, 20L, 50L, 200L. ALCOHOL BASED HAND SANITIZER Gel based hand sanitizer enriched with moisturizer to kill germs and keep hands soft . Usage instructions - Apply a small amount on palm and rub to dry . Active ingredients - Isopropyl alcohol > 60 % , phenoxy ethanol NON ALCOHOL HAND SANITIZER Alcohol free Gel based hand sanitizer enriched with moisturizer to kill germs and keep hands soft . Usage instructions - Apply a small amount on palm and rub to dry . Active ingredient - benzalkonium chloride SURFACE CLEANER CONCENTRATE Colour - yellow Appearance - clear liquid Ph ( 2 % solution ) -- 6.5 - 7.5 Active ingredient - Chlorhexidine gluconate Specific gravity @ 25© -- 0.95-1.05 g/cm3 Recommended dilution - 20-50 ml of solution in one liter of water . ( 20 ml - light cleaning , 50 ml - heavy cleaning ) Pack size - 5L , 20L , 50 L , 200 L
Available Packages: 100mle - 250mle - 500mle - 1000mle - 5L - 30L Price in this page just for 1000mle, please contact for final price. INGREDIENTS In 100 ml as W/V ethyl alcohol 50 g, propil alcohol 20 g, glycerine, skin protectives, scent. Sporicidal elimination is done. APPLICATION AREAS Mostly used for hand and skin disinfectation. For hand and skin disinfectation rub the solution over your hands for 30 sec. For surgical disinfectation use it for 90 sec. Do not apply it on wounds, mucosal membranes, eyes and the areas surrounding eyes. It has bactericide (including MRSA), tuberculocide, fungucide and virucide. (for HBV, HIV, SARS, H5N1, H1N1 and enveloped viruses 30 sec, for Adenoviruses 60 sec are enough.)
Hand Cleanser With Natural Ingredients: Spearmint, Aloe Vera And Chamomille, With 70% Alcohol Content Since the beginning of the coronavirus pandemic all of our lives have become different. We had to make changes to our everyday routines all of a sudden. One is the practice of regular and frequent hand cleaning to remove contaminants, keep ourselves and our environs clean and prevent from infections. Due to the suddenly increased demands for cleaners and disinfectants producers came out with no-rinse hand cleaners very quickly. Most of the hand sanitizers (made according to the suggestions of the World Health Organization (WHO)) clean effectively. The proper alcohol content kills the germs; the water and Glycerine makes it less harmful to the skin; the gelling agents improve the consistency and usage. These products made from the simplest and cheapest ingredients are sufficient against infections, but, on the other hand, not pleasant to the skin at all. Even the first uses make it dry, cracked and coarse; and the applying of hand lotions followed the sanitization cannot be averted. During the developing of this hand cleanser formula the main goal was to create the perfect cleaning effect, as well as to maintain the healthy skin. This means the use of natural, plant-based ingredients which protect and nourish the skin at the same time. We dilute the 96% alcohol used for the hand cleanser with Roman Chamomile floral water instead of pure water, and boost it with nourishing natural ingredients like organic Aloe gel, Panthenol (provitamin B5) and vegetable Glycerine. The pure Spearmint essential oil provides a pleasant smell and is gentle to skin. All together they minimize the unwanted side effects of the usual hand sanitization process and the final, natural-based formula is an effective cleanser, which is extremely gentle to the skin and can be even tolerated by children and people with sensitive and irritated skin. Usage: Apply cleanser to one palm, spread and rub it all over the hands skin. Do not rinse! Available packages: 500 ml pump dispenser bottle and 60 ml disc-top bottle
Vinyl Chloride and Vinyl Acetate Copolymers LC-40 Vinyl Chloride and Vinyl Acetate Copolymers Grade LC-40: It is white powder,ketone and ester soluble with colorless,transparent solution,and it offers a desirable balance of chemical resistance,solubility,diaphaneity,film strength,and thermoplasticity. It has excellent interbedded adhesion. The film with high toughness,flexibility and lasting,anti-wear water resistance,low water swelling and low permeability characteristics.Because of its lower melt index, It also has well sealing property in low temperature. Vinyl Chloride Vinyl Acetate Copolymer Resin Wholesale:PG Chem LC-40 Vinyl Resin Quality standard (XHQB-6) No. Items Index Test method 1 Appearance White powder By visual 2 Whiteness 80 GB2913-82 3 Composition % by Wt Vinyl Chloride 60±2% GB/T7139-2002 Vinyl Acetate 40±2% ISO1159-1978 4 Reactive Functionality Type % by Wt - 5 K Value 48-50 GB/T 3401-2007 6 Viscosity No. ml/g 56-62 GB/T 3401-2007 7 Glass Transition Temp About 60 GB11998-89 8 Average Molecular Wt About 55000 Calculated by the Viscosity No. 9 % by wt, through 60 mesh 100% GB/T6003.1 10 Apparent density (g/ml) 0.5 GB20022-2005 11 Volatilization (%) 1%. GB/T2914-1999 12 Impurity Particle No. /100g 20 GB9348-88 13 25% resin in MEK/Toluene(50/50) Colorless and Transparent By visual Application: Vinyl Acetate Copolymers Resins LC-40 grade is used primarily for maintenance coatings,plastic coatings,heat-transfer paint,outdoor printing ink, carbon ribbon,adhesive for magnetic card and card board. When using with carboxyl resin in the heat sealing lacquer for aluminum foil and PVC can effectively reduce the heat sealing temperature,raise the heat sealing strength. Package, storage and transportation: * In kraft bag, lined with pp bags of 25kgs net, with PE inner bag. *Store in a dry and ventilated place, do not place in open-air, avoid storage in direct sunlight and caution against wet. *Must be transported in clean vehicle with awning and keep away from moisture. * It is NOT hazardous article, and the shelf life is one year from the production date.
DESCRIPTION ITLS PMS 60 is a single component elastomeric sealant without isocyanates. It cures rapidly under the effect of atmospheric humidity to form a flexible and resistant joint with very good adhesion on most materials. APPLICATION ITLS PMS 60 is suitable for industrial and refrigerated trailers, truck bodies, shipbuilding, air conditioning and ventilation units, sandwich panels and other industrial applications. ITLS PMS 60 can also be used for bonding and caulking different materials used in the building industry : concrete, wood, aluminum, most lacquered metals, polyester, glass, stone, ceramic, and so on. However, for difficult materials especially lacquered or non-ferrous metals, it is necessary to make tests beforehand. INSTRUCTIONS FOR USE SUBSTRATE PREPARATION: The substrates must be clean, even, dry, free of dust, oil, grease and any contaminants that could harm bonding. All traces of poorly adherent paints or coatings should be systematically removed beforehand. They may be cleaned with PMS primer, methylethylketone (MEK) or acetone. Check the compatibility of the solvent used with the substrates. It may be necessary to rub down the substrate beforehand. After rubbing down, the surface should be recleaned. Allow the substrate to dry after degreasing. When using solvents, extinguish all sources of ignition and carefully follow the safety and handling instructions given by the manufacturer. CAULKING: ITLS PMS 60 can be applied by a manual or pneumatic gun. After application, use a putty knife to smooth the joint with soapy water. Do not apply at a temperature under 5 C. In cold weather, store the cartridges at about 20 �°C before use. This product should be used within 24 hours of opening the cartridge protection; otherwise, the sealant could harden inside. Avoid any contact with non-cured polyurethanes during curing. CLEANING: Tools can be cleaned with PMS primer, MEK or acetone before the sealant has completely cured. After curing, abrasion is necessary. STORAGE AND SHELF LIFE 12 months in the original, hermetically sealed packagings between 5 and 25 C PACKAGING 290 mL cartridges and 600 ml sausages SAFETY Not classified as hazardous. Read the material safety data sheet before use.
