Protech Grease MP are multi-purpose lithium based greases with antirust additive, corrosion and oxidation inhibitors, with NLGI consistency as respectively specified. It also has excellent resistance to water. APPLICATION Protech Grease MP 2/ 3 are for general lubrication of all� types� of� bearings� and� joints found in automotive and industrial equipment operating under normal temperature and load conditions. Application covers transport, construction, agriculture and other off- road condition where dry, dusty or wet conditions may occur. When applying the grease, always avoid contamination by dust, dirt or other materials. BENEFITS Very good mechanical stability during operation. Compatible with many conventional soap greases. Easily pumpable due to smooth texture. Maintains sufficient lubrication film even under water or humid conditions. Does not contain heavy metals e.g. lead, which could harm the environment.
Protech Grease EP is lithium based multi-purpose grease with extreme pressure additives, rust, corrosion and oxidation inhibitors, with NLGI consistency as respectively specified. APPLICATION For general purpose� greasing of heavily loaded anti-friction� components� e.g. ball, roller and wheel bearing universal joints,� chassis� and� for� shock� loaded� or� vibrating applications found in industry, transport, agriculture, off-road and� earth-moving equipment. Suitable for operating temperature range of -20oC to 130o C. always avoid contamination by dust, dirt or other materials. BENEFITS Excellent mechanical stability during operation ensuring a durable lubrication film at all times. Leading to increased equipment life and reduce maintenance doom - time. Good thermal stability over a wide range of temperature. Maintains sufficient adhesion to metal even under humid condition. Allow product stock rationalization and simplified maintenance. Easy pumpability due to smooth texture and consistency. Does not contain heavy metals e.g. lead, which could harm human health and the environment.
PROTECH, our product consists of about 5 organic acid combinations. these organic acids; ascorbic acid, tartaric acid, lactic acid, citric acid, amino acid. It is effective in chelating plant nutrients, dissolving the nutrients in the soil and making them available. Its pH value is below 2 and it has absolutely no caustic properties. Even if it touches your hand, it will not cause any harm. If you give 1.5 liters per decare in each fertilizer application, you will see the results clearly. provides earliness in harvest.
Brief introduction Protech denture porcelain furnace pt-sy-c-3 is mainly used in denture processing industry. It can also be used for high temperature sintering and annealing of powder metallurgy industry. Unique features Digital programmable porcelain furnace Large size lcd touch screen operating interface High temperature quartz baking furnace chamber Long lifetime electric resistance spiral heating wires Auto-lift and down bottom lifting tray design, stable rising and falling ¡® Equipped oil free vacuum pump Main functions All the parameters shows in one operating interface directly Quartz heating tube, uniform chamber temperature, Perfect temperature preservation and stable heating High accuracy of +/-1.C (33.8 .F) High lightening led light bar shows the working condition directly Overnight temperature preservation Touch screen calibration function High vacuum degree of -98kpa Strong protect from the power interference, tempering, temperature compensation function Easy operating, without noises Perfect porcelain quality, color and luster Application Protech dental porcelain furnace is widely used to process perfect porcelain quality, color and luster in denture processing plant, clinic and hospitals and it is suitable for lots of ceramic materials such as, vita in-ceram, etc. Technical parameters Power supply: 220v, 50/60hz Max. Total power: 1600 w Working temperature accuracy: +/-1.C Max. Working temperature: 1150.C Heating rate: 0~140.C/min Display: large size lcd operating interface Input: touch screen Adjustable program: 100 pieces of programmable curves ( up to 500 pieces is also possible, please contact us) Furnace chamber size: |¦ì10¡¨¢7 cm Grass weight: 50kg
Main application Constant temperature zone : 200mm(¡¨¤1¡æ) Vacuum level:10^-2 torr by mechanical vacuum pump. 10^-5 torr by molecular pump. Leak rate < 5 mtorr / min. Gas flow meter and pressure meter :three gas flow-meters (4% accuracy fs) are installed inside mobile case which are able to monitor gases flowing rate (three different kinds of gases in total) A. Compact direct read flow meter, 10-100 cc/min. B. Compact direct read flow meter, 16-160 cc/min. C. Compact direct read flow meter, 25-250 cc/min.•four pressure meters are installed inside mobile cart which are able to monitor three types of flowing gases pressure as well as the pressure of mixing tank. Max. Power :4.5kw Working voltage:ac220v/110v single phase, 50/60 hz Temperature control:pid automatic control via scr (silicon controlled rectifier) power control, with 50steps programmable Communication interface : rs485 Outside size : 630¡¨¢460¡¨¢560mm Outside size : 630¡¨¢460¡¨¢560mm
Compact muffle chamber with auto lift and drop tray Key technical parameters Max. Working temperature 1700 ¡æ Heating rate 0-30¡æ/min Chamber size: Ø120x120mm Controller Touch screen interface Temperature accuracy +/-1 ¡æ Heating element Mosi2 rod Power supply Ac110-240v, 50/60hz Max. Power 1.8kw Dimensions 360x550x830mm Weight 50kg Quality guarantee 12 month(exclusive wearing part) Dimensions 360x550x830mm Weight 50kg Quality guarantee 12 month(exclusive wearing part)
Protech high temperature melting furnace is mainly used for the melting of precious metal, such as, gold, platinum, silver, etc, and other metals, such as, copper, iron, stainless steel. It is an ideal equipment for jewery processing, Electric or mutual puring furnace body, easy to discharge, esp, suitable for casting Tilt melting pot Main technical specification Name Melting furnace Model Ptc-1700r Operating interface Touch panel or button type for your option Max. Temperature 1700.C Working temperature
NIOSH Approved N95 Respirator Flat face mask with elastic ear loop Brand: Alpha Item No 695 Color: Teal Stripe Packing: 210/case (6 boxes of 35); 108cases/plt Test Performed: (1) Differential Pressure per MIL-M36954C Result (Average): 5.8 mm H 2 O/cm 2 (2)Latex Particle Challenge (Filtration Efficiency) @ 0.1 micron per ASTM F2299 Result (Average): 99.9%
NIOSH Approved N95 Respirator Flat face mask with elastic ear loop Brand: Alpha Item No 695 Color: Teal Stripe Packing: 210/case (6 boxes of 35); 108cases/plt Test Performed: (1) Differential Pressure per MIL-M36954C Result (Average): 5.8 mm H 2 O/cm 2 (2)Latex Particle Challenge (Filtration Efficiency) @ 0.1 micron per ASTM F2299 Result (Average): 99.9%
NIOSH Approved N95 Respirator Flat fase mask with elastic ear loops Item NO 695 Color: Teal Stripe 210/case (6 boxes of 35); 108cases/pallet Test Performed: (1) Differential Pressure per MIL-M36954C Result (Average):5.8 mm H 2 O/cm 2 (2) Latex Particle Challenge (Filtration Efficiency) @ 0.1 micron per ASTM F2299 Result (Average):99.9%
Max. Temperature 1400.C Working temperature
No more fall downs due to soft surface or mud. Motorcycle sidestands are not suitable to hold your bike properly on mudy or losse sufaces. Now, mudbuster keep your bike safely stand on country side. 350 gr.
Scientific Instruments & Consumables..Import.
Vegetable seeds.
Face masks.International product trading
Medical face masks.
Medical face mask.
Press components & commercial components.
Motorcycles.
Basmati rice.
