Professional power amplifier Frequency response20hz-20khz Impedance47 Thd (1khz, aux 150mv input)_0.1% Sensitivity180mv Average power(4+)350w+350w S/n90db N.W.10 kgs/ 22 lbs G.W.12 kgs / 26.4 lbs L - w - h, box:16.9"-14.2"-5.7" / 430-360-145mm L - w - h, package: 18.5"-15.7"-7.7" / 470-400-195mm Colors ˜ silvery / ˜black
Features : * Switching power supply High efficiency and stability of the new switching power supply so that the signal transmission speed faster and more stable voltage changes, sensitivity stronger, lighter weight. * Intelligent signal limiter Each channel has an independent output signal overload distortion, automatic pressure limited function, when the output signals are now clipping distortion can be quickly restored to the output signal compression is not the biggest distortion level and no reduction in the frequency response of audio signals, to avoid DC level because of the audio signal output and burned speakers. * Multiple detection, multiple protection A soft start, the second start, the (low) pressure protection, output overload and short circuit protection. * High efficiency, low fever Efficient Class H amplifier, significantly reduce heat loss. * Pristine audio Metal Packaging, high-power transistors, Yanyi a pure, passionate, authentic audio effects. * Removable face Network Removable the hole into the wind-net, easy cleaning. FP-series Switching Power Amplifier ITEM: FP-2200 / FP-2400 / FP-2600 / FP-2800 Output Power: 20-20kHz, 1W with 1 khz 8¬+Stereo Power(RMS): 350W f- 2 / 550W f- 2 / 750W f- 2 / 950W f- 2 4¬+Stereo Power(RMS): 500W f- 2 / 800W f- 2 / 1150W f- 2 / 1350W f- 2 8¬+Bridged Power(RMS): 1000W / 1600W / 2100W / 2300W Frequency Response(+o/-0.3dB,1W/8¬+): 20-20KHz+0.5dB THD+N: 10KHZ
1. Brushed aluminum front panel with unique streamline design. 2. Perfect dynamic, comprehensive current limit, overload and chopped protection. 3. Intelligent-controlling fan for radiating. 4. Perfectly combine AB technology and topology. 5. AI insert and SMT automatical technique for strict control the consistency of the products. 6. Adopt A class standard steel disc and fine copper high-powered toroidal transformer to achieve driving bass, mellow alto and clear treble. 7. Adopt original high-powered enthusiast Toshiba audio tube. 8. With USA branded twin tube, circuits is optimized to perfection. 9. Suitable for stage performances, KTV rooms and conference rooms etc. Technical Specifications RMS 8O/STEREO: 400W+400W 20Hz-20KHz 4O/STEREO: 700W+700W THD+N 0.1% 8O/BRIDGE: 1400W FREQUENCY RESPONSE ref 1k20Hz-20KHz: ±0.2dB THD+N: < 0.1% SNR: 95dB DAMPING FACTOR: >200 SR: >20V/µs GAIN RL 8O: 37dB INPUT IMPEDANCE: Balance 20K/ Unbalance 10K OUUPUT CIRCUITRY: Class AB AC POWER: AC 220V 50-60Hz (±10%) AMPLIFIER AND LOAD PROTECTION: Soft boot, DC, short circuit, over load, overheat, Clipping distortion INPUT CONNECTORS: Female XLR Type/Male XLR Type OUTPUT CONNECTORS: NL4 Speakon socket, Binding post CONTROLS AND LEDs- FRONT PANEL: Peak clipping, Signal, A&B Volume potentiometers, DC, Protection indicator CONTROLS AND LEDs- REAR PANEL: Stereo, Splice, Bridging option switch, Bridging indicator, Sensitivity option switch, Grounding switch, 30Hz HI-PASS switch. COOLING MODE: Stepless automatic transmission cooling fan.
Main Feature 1. Brushed aluminum front panel with unique streamline design. 2. Perfect dynamic, comprehensive current limit, overload and chopped protection. 3. Intelligent-controlling fan for radiating. 4. Perfectly combine H technology and topology. 5. AI insert and SMT automatical technique for strict control the consistency of the products. 6. Adopt A class standard steel disc and fine copper high-powered toroidal transformer to achieve driving bass, mellow alto and clear treble. 7. Adopt original high-powered enthusiast Toshiba audio tube. 8. With USA branded twin tube, circuits is optimized to perfection. 9. Suitable for large stage performances, KTV rooms, pubs and conference rooms etc Technical Specifications RMS 8O/STEREO: 800W+800W 20Hz-20KHz 4O/STEREO: 1200W+1200W THD+N 0.1% 8O/BRIDGE: 2400W FREQUENCY RESPONSE ref 1k20Hz-20KHz: ±0.2dB THD+N: < 0.1% SNR: 100dB DAMPING FACTOR: >200 SR: >20V/µs GAIN RL 8O: 40dB INPUT IMPEDANCE: Balance 20K/ Unbalance 10K OUUPUT CIRCUITRY: 2-tier Class H AC POWER: AC 220V 50-60Hz (±10%) AMPLIFIER AND LOAD PROTECTION: Soft boot, DC, short circuit, over load, overheat, Clipping distortion INPUT CONNECTORS: Female XLR Type/Male XLR Type OUTPUT CONNECTORS: NL4 Speakon socket, Binding post CONTROLS AND LEDs- FRONT PANEL: Peak clipping, Signal, A&B Volume potentiometers, DC, Protection indicator CONTROLS AND LEDs- REAR PANEL: Stereo, Splice, Bridging option switch, Bridging indicator, Sensitivity option switch, Grounding switch, 30Hz HI-PASS switch. COOLING MODE: Stepless automatic transmission cooling fan. Packaging Info. Net Weight: 32.9kg Packaging Details: Carton with plastic bag inside Gross Weight: 38.13kg Packaging Size: 612 (L)×580 (W)×195 (H)mm Quantity/ Carton: 1pcs
1. Brushed aluminum front panel with unique streamline design. 2. Perfect dynamic, comprehensive current limit, overload and chopped protection. 3. Intelligent-controlling fan for radiating. 4. Perfectly combine H technology and topology. 5. AI insert and SMT automatical technique for strict control the consistency of the products. 6. Adopt A class standard steel disc and fine copper high-powered toroidal transformer to achieve driving bass, mellow alto and clear treble. 7. Adopt original high-powered enthusiast Toshiba audio tube. 8. With USA branded twin tube, circuits is optimized to perfection. 9. Suitable for large stage performances, KTV rooms, pubs and conference rooms etc Technical Specifications RMS 8O/STEREO: 1200W+1200W 20Hz-20KHz 4O/STEREO: 1800W+1800W THD+N 0.1% 8O/BRIDGE: 3600W FREQUENCY RESPONSE ref 1k20Hz-20KHz: ±0.2dB THD+N: < 0.1% SNR: 102dB DAMPING FACTOR: >200 SR: >20V/µs GAIN RL 8O: 42dB INPUT IMPEDANCE: Balance 20K/ Unbalance 10K OUUPUT CIRCUITRY: 2-tier Class H AC POWER: AC 220V 50-60Hz (±10%) AMPLIFIER AND LOAD PROTECTION: Soft boot, DC, short circuit, over load, overheat, Clipping distortion INPUT CONNECTORS: Female XLR Type/Male XLR Type OUTPUT CONNECTORS: NL4 Speakon socket, Binding post CONTROLS AND LEDs- FRONT PANEL: Peak clipping, Signal, A&B Volume potentiometers, DC, Protection indicator CONTROLS AND LEDs- REAR PANEL: Stereo, Splice, Bridging option switch, Bridging indicator, Sensitivity option switch, Grounding switch, 30Hz HI-PASS switch. COOLING MODE: Stepless automatic transmission cooling fan. Packaging Info. Net Weight: 35.73kg Packaging Details: Carton with plastic bag inside Gross Weight: 40.73kg Packaging Size: 612 (L)×580 (W)×195 (H)mm Quantity/ Carton: 1pcs
The vp series power amplifier offers clean, reliable power in a durable enclosure. If you need professional amplification performance, the vp series is perfect for delivering pure, consistent wattage night after night. With six models power upto 1200 watts, the vp series is ideal for powering pa systems and dj rigs. To ensure seamless, reliable performance, the amp features variable-speed cooling fans for thermal stability, along with short-circuit, thermal, over current, thermal protection. For connecting convenience, the vp series boasts xlr and speakon &banana binding post outputs. The unit also provides front panel indicators for signal, limit, protect and power, plus level controls for channels 1 and 2. Selectable modes for stereo and mono bridge give you even more flexibility. Selectable output power range to drive professional loudspeakers without clipping Variable-speed cooling fan for thermal stability and reliability Xlr balanced inputs and speakon &banana binding post outputs Limiter indicator for amp output protection Stereo and mono bridge Variable speed fan for low noise Comprehensive front panel indicators including signal, limiter, protect and power Dc output protection and short circuit protection Frequency response 10hz c 50khz at 1.5 db Total harmonic distortion: less than 0.05% Input sensitivity & impedance: 0.775v Signal to noise (20 hz - 20 khz) > 95db Shipping dimensions (wxdxh) 585x 580 x 165mm
Professional power ampifiers supplier. Many different kinds of amplifiers for your selection.
8ohms Stereo Power(RMS): 2X1050W 4ohms Stereo Power(RMS): 2X1600W Frequency Response(+o/-0.3dB, 1W/8ohms): 20Hz-20kHz, -3dB@135kHz Power Bandwidth (rated power at 4ohms 1%THD+N): 20Hz-20kHz, -. 1.1dB/+0dB TourClass Protection: ACL, IGM, AutoRamp, short circuit, DC voltage, turn-on/off transient, current inrush, sub/ultrasonic input THD+N (1kHz 1W ): -60dB Voltage Gain (rated power @ 8ohms): X40dB Input Sensitivity (rated power at 8ohms): 0.8V Input Impedance (balanced/unbalanced): 20Kohms/10Kohms S/N Ratio ("A"weighted, full power at 4ohms): 96.5dB Crosstalk ("A"weighted, full power@4ohms): >-65dB Class: 3 Step H Input Connectors (per channel): Female XLR (pin 2+, configurable for pin 3+). TRS (tip+) Output Connectors (per channel): 5-way binding posts or Speakon connectors (market dependent) Supply Power: 4158W Power Supply (factory configured): AC220V/230V, 50-60Hz Cooling: Two side panel variable speed DC fans, better than conventional cooling Controls: Front panel: 2 attenuators, power switch; Rear panel: Signal ground lift & mode switches. LED Indicators (per channel): Signal, Protect, Active, Critical Construction: Steel chassis, 16 gauge. Casting Aluminum front panel. Dimensions (HXWXD): 132X483X480mm (3U) Net Weight: 33.5kg Gross Weight: 34.35kg.
Professsional power amplifier manufacturer 2*1500w at 8ohms Also available at 4ohms and 2ohms using Suitable for outdoor events
3-channel with built-in 2in-3out German-made DSP channel-1: 250W@8ohms, 500W@4ohms; RMS channel-2: 250W@8ohms, 500W@4ohms; RMS channel-3: 250W@8ohms, 500W@4ohms; RMS Size:104mm X 223mm X 60mm (WXLXH) Please check our product on http://www.ad-power.cn packed into carton
Model name: H1.3D1 3-channel with built-in 2in-3out, DSP is fm Germany. channel-1: 250W@8ohms, 500W@4ohms; RMS channel-2: 1200W@8ohms, 2300W@4ohms;RMS channel-3: 120W@8ohms, 2300W@4ohms;RMS Size:150mm X 431mm X 70mm (WXLXH) Please check detail pictures on our website http://www.ad-power.cn. Each piece into carton
Amplifier,Professional power amplifier.
Amplifier Mic power amplifier : 3 mic inputs, 2 aux inputs, 1 aux output; fice led displays 70v, 100v and 4-16 ohm balanced outputs Automatic insertion of source and mute Separate volume control, hight/low sound adjustment Alarm and protection in case of short circuit Only the equipment as a pa system
F600 Power Amplifier Key Feature: * 2/3U high, heavy duty steel chassis * Modular construction for easy servicing * Symmetrical layout for even weight distribution * High efficiency toroidal power transformer * Oversized, high energy, linear power supply * 3 steps, Class H Audio topology * Stereo, parallel or bridged operation * Twin balanced inputs (Neutrik XLR connectors) * Dual Speakon and Binding posts outputs * High quality components used throughout * Dual, continuously variable speed fans * Efficient two sides cooling, the efficiency is better than back to front cooling * Active, signal, protect and critical indicators * Duraluminium, 8mm thick front-panel * Unobtrusive carrying handles * Voltage Gain: 35 or 40 dB . Specification: 8ohms Stereo Power(RMS): 2X300W 4ohms Stereo Power(RMS): 2X462W 8ohms Bridged Power(RMS): 968W Frequency Response(+o/-0.3dB, 1W/8ohms: 20Hz-20kHz, -3dB@135kHz Power Bandwidth(rated power at 4ohms 1%THD+N): 20Hz-20kHz, -. 1.1dB/+0dB TourClass Protection: ACL, IGM, AutoRamp, short circuit, DC voltage, turn-on/off transient, current inrush, sub/ultrasonic input THD+N (1kHz 1W ): -60dB Voltage Gain (rated power @ 8Ic): X35dB Input Sensitivity (rated power at 8Ic): 0.97V Input Impedance (balanced/unbalanced): 20KIc/10KIc S/N Ratio ("A"weighted, full power at 4ohms): 99dB Crosstalk ("A"weighted, full power@4ohms): >-63dB Class: 3 Step H Input Connectors (per channel): Female XLR (pin 2+, configurable for pin 3+). TRS (tip+) Output Connectors (per channel): 5-way binding posts or Speakon connectors (market dependent) Supply Power: 1320W Power Supply (factory configured): AC220V/230V, 50-60Hz Cooling: Two side panel variable speed DC fans, better than conventional cooling Controls: Front panel: 2 attenuators, power switch; Rear panel: Signal ground lift & mode switches. LED Indicators (per channel): Signal, Protect, Active, Critical Construction: Steel chassis, 16 gauge. Casting Aluminum front panel. Dimensions (HXWXD): 88X483X480mm (2U) Net Weight: 19.2kg Gross Weight: 23kg.
Professional sound box Type of this modelapplication to karaoke object, ballroom, other assistant+outdoor Frequency response 50hz-18khz(3db) Recommendatory input power 300w P.M.P.O 400w Sensitivity 97db(1-1m) Impedance 8 Speaker unit Low-15"-1 horn other Polar pattern 90ph-40pv Color ruby-red /black Amplifier at optionAk-180 N.W. 26 kgs / 57.3 lbs G.W. 29 kgs / 63.9 lbs L - w - h, box 16.1"-16.1"-25.6" / 410x410x650 mm L - w - h, package 18.5"-18.5"-28.0" / 470x470x710 mm
Led bulb, tube light, panel light, decoration light, wall light, steel wires, steel plate, stainless steel plate, twisted wire rods, galvanized wires, wire mesh, site fencing, mosquito mesh, thread rods, rebar, twisted rods, t bar, nuts and bolts, hardware, pvc pipes, upvc pipes, api pipes, melamine, mdf board, plywood, film faced, shuttering, packing, core veneer, face veneer, hdf molded door skin, door filler, tubular particle boards, pvc boards, wpc boards, doors, block board, hard board, gypsum board, canopy, carpet, flooring wooden, bamboo, laminated engineering, tiles, granite tiles, granite blocks, black galaxy, wash basin, water closets, washbasins, ss sinks, faucets, furniture, pvc edge bending, crew, locks, pvc seals, silicone cartridges, shower enclosures, shower door hinges, handles, knobs, brackets, slides, nails, solar panels, flexible solar panels, solar power station, battery, inverters, rechargeable fans, lights, spring, 3ply disposable face mask, oxygen concentrator ,.Buying office, oem, components sourcing, value added services
Used AVID 16X16 i/o WITH HD NATIVE CARD- EXCELLENT CONDITION-----2000Euro Used Midas Pro 2 Touring Pack - Roadcase, Snake, Stage Box-------9000Euro Used NEVE 5114 CONSOLE-----15000Euro 18x of CROWN Macro-Tech 5002VZ Stereo Power Amplifier-----18000Euro Used Crown I-T8000 ITECH I-TECH 8000 Professional Power Amplifier---1500Euro Powersoft - K Series K8 DSP+AESOP ------3000Euro Powersoft - K Series K10 DSP+AESOP ---------3500Euro Chandler Limited Redd.47 Matched Pair Boxed----3000Euro Fender Pro Reverb------1500Euro Splawn Quick Rod 100W Head WHITE----1200Euro Apogee Symphony I/O With 8 Analog I/O + 8 AES I/O Module-------1200Euro Orange Rockerverb 100 100 watt Guitar Amp head----1000Euro Splawn Nitro 100 watt all tube electric guitar head-----1000Euro Mesa Boogie John Petrucci Signature 2C Mark II Tube Head-----1500Euro Ampeg B15 Portaflex---1500euro AMPEG B-12 N VINTAGE 1960 USA BASS AMP-----1200Euro AMPEG Classic SVT + BOX 8x10-----1200EURO
Professional mixing console, professional power amplifier, professional audio equipment series.
GA500 mini digital amplifier Introduction C-mark ga500 digital mini amplifier, powered by built-in integrative digital power amplifier, features light weight, high efficiency, best sound, safe protection, incredible compatibility of electromagnetism and open choices of 110vac&220vac power supply. Features 1. Plug & play, user-friendly, clear indication, easy manipulating for nonprofessionals. 2. The digital power amplifier features best sound, high efficiency and high reliability. 3. Complete protection from short circuit, over surge current, over heat, over voltage, power limiting, over temperature frees users from worry of malfunction. 4. The amplifier can be configured three output modes, stereo, mono and bridged. Signal input/output adopts ª)6.35 stereo interface for balance signal transmission. 5. Suitable for many applications like commercial, company, entertainment, school and army etc. Specifications Output power 8ª+: 300w x 2 (1khz) 4ª+: 600w x 2 (1khz) Bridged 8ª+: 1000w (1khz) Free power combination from 1pcs to 7pcs in a standard rack as you like, if 7 pcs combined, max power can reach 8ª+ 300w x 14=4200w;4ª+ 600w x 14=8400w;8ª+ bridged 1000w x 7 =7000w channel. Input sensitivity: 0db Input impedance : 20kª+ú¿ balance ú¬ 10kª+ú¿ unbalance ú¬ Frequency response : >20í½20khz @8ª+ Thd+n: 0.01% ú¿1khz, 1wú¬ S/n: 110dbú¿ a weighted ú¬ Power supply : ac110v/220vú¿ two kinds power supply ú¬ Fuse cube current : 20aú¿ac110vú¬ 10aú¿220vú¬ Net weight : 3kg Gross weight : 3.5kg Net dimension ú¿l*w*hú¬: 387 *155 * 57 mm
Aluminum front panel, toroidal transformer Dual-10 phase eq, 6 way microphone inputs Usb/sd card slot support mp3/wma audio files, led display, fm tuner, remote control 515*420*770mm, 3sets per ctn
