Material: Flint glass, UV fused silica, Infrared fused silica, CaF2, Ge, ZnSe, Si etc. Dimension: 4mm-- 100mm Angle tolerance: 30" --3' Surface accuracy: lambda/10--1 lambda Surface quality: 60/40 Clear Aperture: 90% Coating: custom design Besides, there are a large volume of stock optical components in various shapes and sizes to facilitate quick deliveries.
3. Prism Material: flint glass, uv fused silica, infrared fused silica, caf2, ge, znse, si etc. Dimension: 4mm-- 100mm Angle tolerance: 30" --3' Surface accuracy: ¬d/10--1¬d Surface quality: 60/40 Clear aperture: 90% Coating: custom design According to custom design to manufacture kinds of right angle prism, equilateral prism, dove prism, penta prism, roof prism from optical glasses. Standard lot.
Prism Material: Flint glass, UV fused silica, Infrared fused silica, CaF2, Ge, ZnSe, Si etc. Dimension: 4mm-- 100mm Angle tolerance: 30" --3' Surface accuracy: ª-/10--1ª- Surface quality: 60/40 Clear Aperture: 90% Coating: custom design
Prism Our istandardfª product line includes cylindrical lenses, lenses, plano-convex cylindrical lenses, plano-concave cylindrical lenses, spherical lenses, aspheric lenses, prism, filter, achromatic lenses and reflector etc. Customers inquiries always meet with our careful attention.
Corner Cube Retroreflectors Corner Cube Prism is also called Retroreflector or Trihedral Prism. In the Corner Cube Prism, three reflecting surfaces are perpendicular to each other, like the side wall of the cube. The input surface is perpendicular to the cube diagonal. Disregarding the angle of incidence, the output beam is parallel to the input one, but it is of opposite direction. Inset of the several corner prisms, for better matching, their entrance-exit surface is often hexagonal. In case of this prism the phenomenon of full internal reflection occurs so it is not necessary, (however it is possible) to put mirror coating on the reflecting faces. Normally the reflection surfaces are Al reflection coating, and then covered with Cu and Black Painting. Specifications: Material: BK7 Glass Dimension Tolerance (mm): 0.2 (General), 0.1 (High Precision) Deviation: 180 3 arc secs Flatness (per 25mm 633nm): 2(General), 10 (High Precision) Clear Aperture: 80% (small size),90%(large size) Surface Quality: 60/40 (General), 10/5 (High Precision) Bevel (mm): 0.1-0.5 Coating on input and output sides: Note for corner cube retroreflector: (1). Besides N-BK7, custom-made corner cube Prisms made of other optical materials are available. (2). Corner Cube Prisms with lower deviation tolerance, such as 1, 30, or 10, are available. (3). Corner Cube Prisms with better surface Quality (better than 40/20 or 20/10) are available. (4). HR or Metal reflection coating(Al, Ag, Cu, etc.) on reflection surfaces is available. (5). AR coating on input/output surface is available upon request. (6).Custom-made non-standard Corner Cube Prisms at any other size are available upon request.
Sunday Optics is making various prisms, right angle prisms, penta angle prism, roof prisms, wedge prisms, dove prisms, porro prisms Material: BK7 K9 JGS1 Sapphire ZnSe Germanium Silicon Size:0.5-600mm Angle tolerance:+/-1 seconds Surface Quality:20/10 Flatness:1/10lambda. Coating: Al, Silver, Gold,HR,Dielectric.
CaF2 prism safe packing
Material:bk7 or(jgs1 jgs2 jgs3)glass qualityz:nd+/-0.001~+/-0.0001 vd +/-0.8%~+/-0.1% dimension tolerance:+/-0.20mm~+0.01/-0.01mm thickness tolerance:+/-0.20mm~+/-0.005mm surface quality:80-50~10-5surface flatness: at 632.8nm lambda~ lambda /20 per 25mm clear aperture 80% ~100% angle tolerance 3-5 minutes~3 second chamfer 0.3+/-0.20mm x45degreeno chamfer coating optional As request
We will also do according to the specifications such as size, structure, material, surface treatment and so on that the customers required. We supply them with good quality and low price. Please contact us to know details. Besides, there are a large volume of optical components in various shapes and sizes in stock to facilitate quick deliveries. Safety carton package
The following are parameters: 1.Material: bk7, fused silica and other optical glass E specifications such as size, structure, material, surface treatment and so on that the customers required. We supply them with good quality and low price. Please contact us to know details. Besides, there are a large volume of optical components in various shapes and sizes in stock to facilitate quick deliveries. Safety carton package
We will also do according to the specifications such as size, structure, material, surface treatment and so on that the customers required. We supply them with good quality and low price. Please contact us to know details. Besides, there are a large volume of optical components in various shapes and sizes in stock to facilitate quick deliveries. Safety carton package
We will also do according to the specifications such as size, structure, material, surface treatment and so on that the customers required. We supply them with good quality and low price. Please contact us to know details. Besides, there are a large volume of optical components in various shapes and sizes in stock to facilitate quick deliveries. Safety carton package
Mini monitoring prism mounted in metal holder. Supplied with l bar for fixed installations. The prism offset is dependant on the mounting position. 50pcs/ctn, 12kg, 0.02cbm
Powellenses is one kind of opticaruling lens, xi'an lingyue machinery&electr.Ltd.Cnsupply powellenses that divergence angle from 10íp to 100íp, the standard have 30íp\45íp\53íp\60íp\70íp\85íp\90íp. When 1mm laser bean get through the powellenses, it is optimized transformed a line which is uniform, stability, straight .Lineation by powellenses is better than aspheric lensse, as by powellense can cancelling centrahotspot of gaussian beams and fade-marginadistribution. Applied range: Laser scriber Machining -position by makeing Building- graticule by makeing Laser scanning system Customs can order by index following Divergence angle Work distance Beam wavelength or beam diameter Width of lineation. Standard: Divergence angle materials 30íp bk7 45íp sf6 53íp bk7 60íp sf6 70íp sf6 85íp sf6 90íp sf6.
Prism Material: Flint glass, UV fused silica, Infrared fused silica, CaF2, Ge, ZnSe, Si etc. Dimension: 4mm-- 100mm Angle tolerance: 30" --3' Surface accuracy: ª-/10--1ª- Surface quality: 60/40 Clear Aperture: 90% Coating: custom design According to custom design to manufacture kinds of right angle prism, equilateral prism, dove prism, penta prism, roof prism from optical glasses. Standard lot
Prism: Prisms are blocks of optical material with flat polished sides arranged at precisely controlled angles to each other, which deflect, deviate and rotate beams of light as well as dispersing their wavelengths. We could provide many kinds of high precision prisms, including as follows: Penta Prism Beamsplitter Penta Prism Dove Prism Right-Angle Prism BK7 Wedge Fused Silica Wedge Roof Prism Corner Cube Retroreflector Anamorphic Prism According to different application, you could choose different prism. If you want know more about them, pls kindly refer to our website. lens: Lenses have many applications ranging from the simple collection of the scanning of laser beams to precise imaging and image transfer. We provide these lenses as follows for different application. Plano Convex Lens Plano Concave Lens Double Convex Lens Double Concave Lens Achromatic Lens Cylindrical Lens According to different application, you could choose different lens with BK7 or fused silica material.
A transparent optical element having at least two polished plane faces inclined relative to each other, from which light is reflected or through which light is refracted. Changchun fortune optronics inc. Could manufacture various optical prisms: penta prisms, beamsplitter penta prism, right-angle prisms, dove prisms, roof prisms, corner cube retroreflectors, wedges prism, etc. For more information about our company and our products, pls kindly visit our website: www.Fortuneoptical.Com
Dove prism is a kind of reflection prism used for image reflection.Dove prisms are formed by truncated rectangular prisms.A beam of light enters one of the slanted faces of the prism, fully reflects from inside the longest (bottom) face, and then exits from the opposite slanted face.The image through the prism is flipped, and since only one reflection occurs, the handedness of the image is reversed.Dove prisms have an interesting property that when they rotate along the vertical axis, the transmitted image rotates twice as fast as the prism.It is very important that applications use parallel or collimating beams and keep the large square reflector very clean.Another application is as an inverse. Dove Prism Specifications Material BK7, UV Fused Silica, Sapphire, ZnSe, Caf2, Si, Ge, etc. Size 2mm-300mm Size tolerance +/-0.02mm or customer request Clear Aperture 90% S/D 60-40 40-20 20/10 10/5 Flatness 1/10lambda at 632.80nm Chamfer 0.25mmx45 Angle tolerance
Porro Prism A refracting optical prism used in optical instruments to modify image orientation, In use, the light enters through the largest rectangular plane in the prism, passes through two total reflections of the inclined plane, and then penetrates the original plane of incidence, Because the light comes in and out normally, the prism does not disperse. But the image that passes through Porro prism will be flipped 180 degrees, and it will travel in the direction it entered, which means it will travel 180 degrees. Porro Prism Material BK7, UV Fused Silica, Sapphire, ZnSe,Caf2,Si,Ge,etc. Size 3mm-300mm Size tolerance 0.00/-0.05mm or customer request Clear Aperture 90% S/D 60-40 40-20 20/10 10/5 Flatness 1/10 1/4lambda at 632.80nm Chamfer 0.25mmx45 Angle tolerance
Wedge prism has plane inclined surfaces. It deflects light toward its thicker portion. It can be used individually to deflect a beam to a special angle. Two wedge prisms work together can assembly an anamorphic prism to correct the elliptical shape of laser beam. The wedge prism is ideal for laser beam steering applications. By combining two wedge prisms which can be rotate individually, we can direct the input beam to anywhere within the cone angle �¸d, where �¸d is 4x the specified angular deviation of one wedge Wedge Prism Specifications Material BK7, UV Fused Silica, or customer request. Size 1mm-600mm Size tolerance +/-0.02mm or customer request Clear Aperture 90% S/D 60-40 40-20 20/10 10/5 Flatness 1/10lambda at 632.80nm Chamfer 0.25mmx45 Wedge Angle tolerance