Overview
SA2100 is a handheld multi-functional device which is designed to measure and analyze single or three-phase power system. This portable class S device can provide safe, convenient and accurate measurements for troubleshooting power networks.
SA2100 Portable Power Quality Meters
Portable Power Quality Meters enable electricians and facility maintenance professionals to troubleshoot and benchmark power quality problems over time. They help you identify energy waste in your facility and detect and prevent power problems before they occur.
Why do you need Power quality meter analyzer?
Portable Power Quality Meter identifies power quality problems that often manifest themselves as dips, spikes, harmonic distortion, imbalances, flicker and transients.
Power quality determines the suitability of electrical energy to drive motors, machines and other end-user equipment.
Poor power quality can affect the ability of these devices to operate properly, which can lead to malfunctions, premature failures or possibly cause them to not work at all.
Most power quality analyzers monitor total harmonic distortion, phase angle, power factor, balance, etc. to get a complete picture of the system.
MPM8000 is a powerful multifunction power meter with modular design, which can be applied for monitoring and controlling of the electrical system. MPM8000 can measure and analyze real time data, such as U, I, P, Q, S, COS¦µ, F, kWh, kVAr, etc. MPM8000 has the following functions: RS-485 communication port, 2 energy pulse output (include active energy and reactive energy), Max/min data record, and SOE event record. MPM8000 can extend functions by choosing the external optional modules: harmonic analysis, 8 remote signals on/off mode, programmable 4 analog outputs (0~5V or 4~20mA optional), data storage, Profibus Com. protocol, Ethernet communication functions. The multi-tariff function allows the user to measure energy in any interval (the min. interval is 30min.), which can read the sum, sharp, peak, valley, flat energy data in 30 days, and measure 2nd to 63rd harmonics in statistics.
All our instruments fulfill all important requirements and regulations concerning electromagnetic compatibility and safety isolation (IEC61000, IEC1010 standard and EN61010 standard). The devices have been developed, manufactured and tested in accordance with Quality Assurance System ISO 9001.
1.Product Profile
QAM8300-1M power quality analyzer is an integrated monitoring, analyzing and controlling device that offers electrical parameter metering, harmonics metering and analysis, waveform sampling, measurement of Voltage swell, dip, interrupt, Voltage unbalanced ratio, fault record, event record, data record. QAM8300-1M can monitor and detect if the power quality fulfills IEC and EN standard. With its powerful I/O functions with exterior device, QAM8300-1M can perform harmonic control, PF adjustment, and demand monitoring functions.
QAM8300-1M fulfils all the important requirements of IEC 61000-4-30 Class A standard.
QAM8300-1M can work with our power quality monitoring and management software to provide energy management solutions for enterprises. With its strong networking capability, QAM8300-1M can display and record all the data records on the interactive trend chart. A data report can be formed periodically. The report can be used for fault analysis, statistics, real time monitoring purpose.
QAM8300-1M fulfills IEC61000-4-30 A: 2003,IEC61000-4-15:2003,IEC61000-4-7:2002,EN50160,2004 etc standards.
2.Measurement Accuracy
U, I: 0.1%
U, I peak value, peak factor, flicker: 0.5%
3 phase Voltage unbalanced ratio: 0.2%
3 phase Current unbalanced ratio: 0.5% Frequency: 0 .002Hz
Power factor: 0 .002
Power: 0.2%
Energy: Active energy 0.2% IEC60687:1992(GB/T17883-1999) Reactive energy 0.2% IEC61268(1995) (GB/T17882-1999)
Harmonics: IEC61000-4-30 class A Interharmonics: IEC 61000-4-30 class A Harmonic distortion rate: 2.5%
3.EMC and safety test
EN61326-1 EN61000-4-2/3/4/5/12
IEC/EN61010-2001.
Detailed product description
1. Power meter measures voltage, current, power, power factor, kwh, kvarh
2. Rs485/ modbus
3. Power quality analysis
4. Di/do
PMAC735 power meter features:
1. Suit for lv/ hv voltage system
2. Compact design with all real-time measurement
3. Consist of basic unit and optional modules
4. 10 years back-up of integrated energy data
5. Large lcd, high brightness, auto-scrolling
6. High accuracy, v or i is 0.2%, kwh is class 1
7. Ct and pt programmable
8. Pluggable terminals, easy to install
9. Panel size: 96 x 96mm
10. Password protect
PMAC735 power meter basic function:
Provide one rs485 communication, measures and display real-time parameters:
1. Voltage¡ªua, ub, uc, uab, ubc, uca,
2. Current¡ªia, ib, ic, in
3. Active power ¨c pa, pb, pc, p
4. Reactive power ¨cqa, qb, qc, q
5. Apparent power¡ªsa, sb, sc, s
6. Power factor¡ªpfa, pfb, pfc, pf
7. Frequency
8. Active energy¡ªkwh (4 quadrant)
9. Reactive energy¨c kvarh (4 quadrant)
10. Demand and max. Record for i, p, q, s
11. Unbalance rate for u, i
12. Max./ min. Value
Pmac735 power meter di/ do modules:
1. 4 status input + 4 relay output
2. 8 status input + 2 relay output
3. 8 status input + 2 pulse output
4. Profibus communication module
Pmac735 power meter optional function:
1. Up to 31st harmonic analysis, k factor, thd
2. Soe (event log)
3. One 4~20ma analog output.
.1 Description
DEM8900-1/DEM8900-2/DEM8900-3 (short form for DEM8900) is designed by adopting the updated microprocessor and digital signal processing technology, which can be applied for monitoring the electrical system. DEM8900 can measure and analyze the real time electrical parameters, such as I,kWh,kvarh., Meanwhile, DEM8900 has functions of multi-tariff,RS485 communication ( MODBUS protocol),analog output, remote input and electrical pulse output.
All our instruments fulfill all important requirements and regulations concerning electromagnetic compatibility and safety isolation (IEC61000, IEC1010 standard and EN61010 standard). The devices have been developed, manufactured, and tested in accordance with Quality Assurance System ISO 9001.
1.2 Measured parameters
Note 1. DEM8900-1 measure current, active energy, active power (optional, with analog output)
2. DEM8900-2 measure current, reactive energy, reactive power (optional, with analog output)
3. DEM8900-3 measure Current, active energy, reactive energy, active/reactive power (optional, with analog output)
1.3 EMC and Safety standard
IEC61000-4-2 (GB/T17626.2)
IEC61000-4-8 (GB/T17626.8)
IEC61000-4-4 (GB/T17626.4)
IEC61010-1 (GB/T4793.1).
Exterior Size:91*91*72mm
0.5KGS.
257042 Power Quality Meter Suppliers
Short on time? Let Power Quality Meter sellers contact you.
CPM-12D is a din rail mounting multifunction power meter with high accuracy measurement for single phase and three-phase system.
Measuring all basic parameters ; V, I, P, Q, kWh, kVarh etc..
1 RS485 Modbus RTU communication port as default,
LCD display in front panel with buttons for programming.
Auto wiring change (see remark as below) via software
CE and FCC approved
Remark: Auto wiring change have certain condition limit, please refer to operation manual for further details.
 Applications
Energy management system
Factory automation
Intelligent power panel
Industrial automation
Power Grid automation
Community power monitoring
Intelligent green building
DTSD1088 three phase multifunctional meter is made to accurately measures total active/reactive energy, forward and reverse active/reactive energy and maximum demand. And in real-time it also measures and takes in process parameters like active/reactive power, apparent power, voltage, current, power factor, frequency and so on, and implements time-of-use control, automatic storage of reading-day demand, and records of load profile and events. With infrared, RS485, PLC and GPRS communication equipped, DTSD1088 meter realizes time of use energy measurement and efficient processing in ease. It complies with applicable standards of IEC62052-11, IEC62053-21, IEC62053-23, IEC62053-661, IEC62054-21, IEC62056-61, IEC62059-11 and IEC62059-21.
FEATURES
1.Functional LCD displays(menu driven, scrolling function, IR remote control mode)
2.Events record: Power-on/power-off (latest ten time), power quality monitoring(10 times), meter cover open(10 times recorded and can be read by MDM software).
3.Load curve recording: Active/reactive energy, voltage(3 phases), current(3 phases), power factor(3 phases) and time stamp(DD/MM/HH/YY)
4.External relay
5.Over-load protection: Automatic power-off as load exceeds the specified value(optional)
6.RTC, broadcast time synchronization via communication interface(could be set by GPS time via the MDM)
7.Optional multi-communication: PLC based on OFDM according to CENELEC standards(A-band), GPRS(SIMCOM-chip), RS485, integrated M-Bus(extended connection to gas and water meters) according to OMS standard.
This portable optical power meter with red light source is an accurate portable instrument with long service time specially designed for the installation, operation and maintenance of fiber-optical network. It features fine appearance, controllable backlight display, automatic power off, supper wide testing range for optical power, high accuracy, self-calibration and universal interface. Whats more, the linearity index(mW) and nonlinear index (dBm) will be displayed in a same screen. The optical power meter can be used alone for saving power.
Product features
The optical power meter with red light of 10mW or 1mW features open self-calibration which could be operated by the user.
With two AA batteries, the optical power meter can work continuously for 40 hours. It can work continuously if working with a red light source of 10mW, or 42 hours with a red light source of 1mW.
the linearity index(mW) and nonlinear index (dBm) will be displayed on the same screen of the optical power meter.
Special universal interface for FC/SC/ST, easy to transformation.
Profile:
MPM8000 is a powerful multifunction power meter with modular design, which can be applied for monitoring and controlling of the electrical system. MPM8000 can measure and analyze real time data, such as U, I, P, Q, S,COS, F, kWh, kVAr, etc. MPM8000 has the following functions: RS-485 communication port, 2 energy pulse output (include active energy and reactive energy), Max/min data record, and SOE event record. MPM8000 can extend functions by choosing the external optional modules: harmonic analysis, 8 remote signals on/off mode, programmable 4 analog outputs (0~5V or 4~20mA optional), data
storage, Profibus Com. protocol, Ethernet communication functions. The multi-tariff function allows the user to measure energy in any interval (the min. interval is 30min.), which can read the sum, sharp, peak, valley, flat energy data in 30 days, and measure 2nd to 63rd harmonics in statistics.
EMC and safety standard
IEC61000-4-2 (GB/T17626.2) IEC61000-4-8 (GB/T17626.8)
IEC61000-4-4 (GB/T17626.4) IEC61010-1 (GB/T4793.1)
Measured Scope:
The meter MPM8000 can be applied in single phase, 3-Ph 3Wire, 3-Ph 4Wire system. It can be applied vastly in the field of secondary measurement in high Voltage, low Voltage system, or transmission of measured data.
Measured accuracy
Parameters
Display
Direction
Accuracy
Voltage
0~9999.9kV
Class 0.2 scope:5%~100%V
Current
0~9999.9kA
Class 0.2 scope: 5%~100%A
Zero sequence Current Class 0.5
Power factor
-1~+1
Directional
Class 1
Frequency
45~65Hz
¡À0.01Hz
Active Power
-9999~9999MW
Directional
Class 0.5
Reactive Power
-9999~9999MVAr
Directional
Class 0.5
Apparent Power
0~9999MVA
Class 0.5
Active Demand
-9999~9999MW
Class 1.0
Reactive Demand
-9999~9999MVAr
Class 1.0
Active Energy
0~9999999.99Mwh
Directional
Class 1.0
Reactive Energy
0~9999999.99MVArh
Directional
Class 2.0
* DDSU1877 is used to measure the rated frequency of 50Hz, Rated voltage below 265V, single phase AC smart power.
* Made of fine quality ABS material, impact resistance, heat-resistant, cold-resistant, and with fine insulating effect.
* Alarm when low energy/overload/fraud.
* With RS485, GPRS, 4G, or other communication functions for reading meter and setting parameters.
* The smart meter adopts the special large scale integrated circuit and special technology to ensure the accuracy and reliability of measurement.
* 5+1 bit wide temperature LCD display, real-time display voltage, current, power, total energy kWh.
* Comfortable guide rail installation mode 35-36 mm.
* Calculate total consumption, real-time view of power consumption via mobile phone.
* APP remote control. You can easily control your devices when you leave your home or fast-forward your home, easily control the status of your home device at any time via the mobile APP.
* Long service time by high brightness LED indicator.
* It can realize the functions of automatic tripping when the balance is exhausted.
* After you pay for the electricity, the energy meter could display the remaining electricity.
* It could realize remote manual closing and open the energy meter.
* The Single phase WiFi energy meter will update the Kwh data when disconnect with wifi. It will not lose the historical data if there is a power outage.
True-RMS measuring parameters
ANSI and IEC 0.2 accuracy class
Power quality analysis
4 quadrant energy
2MB onboard memory, can be extended to 16M
Data logging
High-speed RS485, Ethernet port (option)
Measure individual harmonics from 2nd to 63st (option)
TOU, 4 Tariffs, 6 Seasons, 6 Schedules
Three years warranty
With PC management software; web browse data
APPLICATIONS
Metering of distribution feeders, transformers, generators, capacitor banks and motors
Medium and low voltage systems
Commercial, industrial, utility
Power quality analysis
Data logging
Monitoring system
Multifunction power meter PD194E-9F2
It is YOYIK special sale. Deyang YOYIK power spare parts service is committed to thermal power plants, hydropower station spare parts production and supply. Long-term for the power plant to provide a large number of steam turbine spare parts, turbine generator spare parts, boiler spare parts, turbine spare parts accessories, water turbine generator spare parts, generator cover plastic seal, steam turbine cylinder head high temperature sealant, Oil cooler, mirror plate, steam turbine heating rods and other power plant spare parts spare parts. Welcome to inquire
Yoyik can offer many spare parts for power plants as below:
#DF-Multifunction power meter PD194E-9F2-DF
Transducer DBS/Q-231
Eddy Current Sensor PR6423/001-031
Level Gauge AL501-D51002
LVDT transmitter XCBSQ-01/500-01-00
pt 100 temperature probe WZPM2-201T
digital stabilizer control card FBMSVH
Splitter EHM-01-12D
power module unit AC100-450V
linear displacement transducer sensor TD-1-400
Differential Pressure Gauge 5NN-K5-M4-CIA
Sensor Proximity Turbin TM0702-05
optical linear position sensor BTL5-E10-M300-P-S32
speed sensor M16*1D-100-02-01
Pressure Switch B-4-24-B-IP65-06-JL-NH
pickup sensor price G-065-02-01
VOLTMETER 6L2-V
Ultrasonic Level Transmitter MPM626W6E22C3
Sensor DF310880-90-04-02
LVDT transmitter XCBSQ-01/200-01-22
VIBRATION PROTECTIVE TRANSMITTER SDJ-101
LVDT Sensor TDZ-1C-03
ac transducer switch 4RN-EE45-M4-C1A
LVDT Sensor 7000AT
Temperature switch T768TS040XCNC4 20/95C
magnetostrictive position sensor TDZ-1-H
k type probe sensor WRNK2-231
heat expansion sensor DT-2
high temperature inductive sensor CWY-DO-815008
Brake Switch RC771BZ090Z
magnetic pick up sensor NE6103-050-150-03-09-01-00
Eddy Current Sensor PR6422/003-101
high pressure limit switch 453941-N12065
Excitation Cable BXR-300/500V-240
absolute linear position sensor 8000TDGN
Embedded intermediate relay GZY-210/110V
Oxygen Analyzer Heater Assembly AZ200 721
Multifunction power meter PD194E-9F2
Pop-560 power meter is the newest-generation handheld fiber optical tester. It can offer the
Best performance for the daily maintenance for fiber network, and cwdm system, dwdm
System and fttx network. The perfect test function and test ensurence are all ideal for
Indoor or field-testing.
Features:
The most perfect testing function:
1. Three kinds of modulated signal recognitiong270hzb1khzb
2khz
2. Auto-wavelength recognition, no need for communication
Between the sources and power meter. Save test time and
Decreases the potential error.
3. 21 calibrated wavelengths offered to meet the customersªtesting
Requirement. Such as fttx 1490nm.
4. The moveable connector provides several types of connector
Included fc, sc etc.
5. Superior testing range: -70dbm p +10dbm or -50dbm p
+26dbm
Nthe most perfect power supply and power management:
1. Internal rechargeable li batterybaa battery and ac adapter.
2. Auto power-off.
3. More than 200hr battery operating.
Nthe most perfect testing guarantee:
1. Superior stability to ensure the testing performance and repeatability.
2. Wide lcd display that provides the most complete testing information: wavelength,
Modulated signal, all kinds of conditions.
3. High quality and rugged design, ideal for field testing.
Laser Source Power Meter
The Laser Source Power Meter provides an economical, stable laser source for point-to-point attenuation measurements. It features a rugged design that withstands the harsh test environments of fiber optic cable installation and maintenance.
IoT Power Meter
A IoT power meter is a data-transmitting meter that helps industries monitor and manage three-phase power consumption. It transmits real-time energy consumption data to a server in the cloud, allowing for better management of energy consumption and industrial equipment.
Acrel ADW300 energy meter is mainly used to measure three-phase active electric energy of low-voltage network, with RS485 communication and 470MHz wireless communication function, which is convenient for users to monitor, collect and manage electricity consumption.
FU2200A digital Ethernet power meter with data logger is a three-phase multifunction power and energy meter manufactured by GFUVE. It provides excellent value for monitoring power and energy management systems. It may be used as data gathering devices for intelligent power distribution or plant automation systems. All monitored data is available via a standard digital RS485 communication port, which is based on the Modbus RTU protocol.
FU2200A Ethernet power meter has the PC software and the data logger function, which can set by end users from 1min to 60min intervals to record. You can read the data through a PC. Also, you can share the data in the Internet LAN. By the way, it can measure the harmonics. Back of power meter FU2200A with Ethernet port.
257042 Power Quality Meter Suppliers
Short on time? Let Power Quality Meter sellers contact you.
