DM200C Concrete Moisture Meter DM200 Concrete moisture meter is a high-performance and digital moisture testing equipment by our company based on international advanced technology.The instrument adopts high frequency principle, digital display, sensors and main body together as one, equipped with ten gears are used to measure concrete,glass,cement and brick. Features: * Its integrative design convenient to carry outside for testing. * Digital display with back light gives exact and clearly reading although you stay at the somber conditions. * It is small in size, light in weight ,easy to carry out for fieldwork if needed. * Manual off at any time. Specification Display:4 digital LCD Measuring range : 0.00-2.00% (d) 0.0-50.0% (s) Measuring condition Temperature:0-60 C Humidity:5%-90%RH Resolusion:0.1 or 0.01 Accuracy: ± 0.5(main moisture range) Power supply: 9V battery (6F22) Dimensions: 160mm 60mm 25mm Weight:203g (not including batteries)
DM200C Concrete Moisture Meter DM200 Concrete moisture meter is a high-performance and digital moisture testing equipment by our company based on international advanced technology.The instrument adopts high frequency principle, digital display, sensors and main body together as one, equipped with ten gears are used to measure concrete,glass,cement and brick. Features: * Its integrative design convenient to carry outside for testing. * Digital display with back light gives exact and clearly reading although you stay at the somber conditions. * It is small in size, light in weight ,easy to carry out for fieldwork if needed. * Manual off at any time. Specification Display:4 digital LCD Measuring range : 0.00-2.00% (d) 0.0-50.0% (s) Measuring conditionï¼? Temperature:0-60°C Humidity:5%-90%RH Resolusion:0.1 or 0.01 Accuracy: ± 0.5%n Power supply: 9V battery (6F22) Dimensions: 160mmÃ?60mmÃ?25mm Weight:203g (not including batteries)
Dm200concrete water testing instrument adopted the high frequency principle based on the introduction of the most advanced technology from foreign country. In other words, there is a fixed frequency inside the equipment. Once the moisture of the detected objects carried, the frequency through the sensor will be different. The deference between the frequencies will be displayed in figure after the conversion by current-frequency converter. Dm200 concrete moisture meterwork principle This instrument adopted the high frequency principle based on the introduction of the most advanced technology from foreign country. In other words, there is a fixed frequency inside the equipment. Once the moisture of the detected objects carried, the frequency through the sensor will be different. The deference between the frequencies will be displayed in figure after the conversion by current-frequency converter. Dm200 concrete moisture meter specification Its integrative design convenientto carry outside for testing. Digital display with back light gives exact and clearly reading although you stay at the somber conditions. It is small in size, light in weight , easy to carry out for fieldwork if needed. Manual off at any time .Auto power off after 5 minutes from last operation. Specification Display:4 digital lcd Measuring range 0%-80% Operating conditions: Temperature:0-60 Humidity:5%-90% Resolusion:0.1 Accuracy: â± 0.5%n Power supply: 9v battery (6f22) Dimensions: 160mm60mm25mm Weight:203g (not including batteries)
Commodity: Calcium chloride Molecular formula CaCl2 H.S code 28272000 Product feature Calcium chloride is an inorganic salt, which exists as solid or liquid. Solid calcium chloride is a white, crystal substance in the form of flake, granule, pellet or powder. With different crystallized water contents, it can be dihydrate or anhydrous. Liquid calcium chloride is a colorless, clear solution. As calcium chloride has such properties as quick dissolving, exothermic ability, attracting moisture from the air and surroundings, dissolving at very low temperature, Specifications: Analysis Item Standard Calcium chloride (CaCl2) 74%min,77% min,94%min Total Chlorinated Alkali: (NaCl) 5.0%max Magnesium Chloride(MgCl2) 0.5%max Insoluble matter in water 0.25%max Calcium Sulfate (CaSO4): 0.2%max Ferric Oxide (Fe2O3) 0.025%max Heavy Metal as Cu., Pb., Cd., Cr., Hg., As 0.005%max Application Mainly used in drying, melting snow for airport express and street, concrete desiccant and concreting fast, removing dust and oil industry. Exporting Packing :Plastic woven bag with PE ,25kg/50kg/1000kgs net weight or 25kg x 40 bags into one big bag or 40 bags on a pallet with shrink-wrapped Means of transportation :in containers or by bulk vessel with large quantity
English name: Calcium Nitrite Molecular formula: Ca(NO2)2 Molecular weight: 132 CAS NO. 13780-06-8 HS CODE: 28341000 UN NO.: 2627 5.1 type oxidizing agent Properties: White powder without crystal water. It is tasteless and toxic. Easily in water and presents light yellow solution. Specifications: Item Superior grade First grade Second grade Calcium Nitrite[Ca(NO2)2 as dry basis]% 94 92 90 Calcium Nitrate[Ca(NO3)2 as dry basis]%
Inductive Moisture Meter For Concrete Inductive moisture meter MS310 is used for measuring moisture content of wood ,Timber,paper,Bamboo,Carton ,concrete, textile and other materials.It applicable of woodwork,paper making , flakeboard, furniture ,building, timber traders and other relevant industry. Features: 1.1.It is portable, compact, easy to use and the moisture measurement readings are instant. 1.2.Digital display with back light gives exact and clearly reading although you stay at the somber conditions. 1.3.It will save time and expense by monitoring dryness and helps to prevent deterioration & decay caused by moisture whilst in storage, therefore processing will be more convenient and efficient. 1.4.The moisture meter operates by electrical resistance and has automatic temperature compensation. 1.5.Manual off at any time .Auto power off after 5 minutes from last operation. 1.6 Data hold function. Low battery alert. Specification Display:4 digital LCD Measuring range :0-99% Operation Condition: Temperature:0-60°C Humidity:5%-90%RH Resolusion:0.1 Accuracy: ± 0.5%n Power supply: 4x1.5 AAA size (UM-4) battery Dimensions:140mmÃ?60mmÃ?22mm Weight:119g (not including batteries) Material Species:20 kinds Guarantee:1 year
Coir Rope 1. Diameter: 6-8mm * Length: 200m * Loading: - 200 meters 1800 rolls/ Cont 20ft - 200 meters 3600 rolls/Cont 40ft 2. Diameter: 16-18mm * Length: 100-200m * Loading: - 100 meter 900 rolls/ Cont 20ft - 200 meter: 450 rolls/Cont 20ft 3.. Diameter: 30mm * Length: 80m * Loading: - 240 rolls/Cont 20ft (+/-10%) - 480 rolls/ Cont 40ft - 600 rolls/ Cont 40 HC We also have others sizes as your requirement such as: 5mm, 10mm and so on. * Moisture: 10 - 15% max
Coconut fibers are mainly used to create ropes. Since these types of coconut coir are natural and resist sea water, it's widely used to accessories in boats and fishing nets. Most of these ropes are really tough. DIAMETER: 5,7,10,12,14,16,20 MM Length: 100, 200, 1000, 2000 Meter Color: Brown Natural Made From: 100% Medium Tolong Fiber Impurity: 2% Max Moisture: 15% Max
SIZE : 1M X 10 M X 10 MM 1M X 10 M X 14 MM 1M X 10 M X 18 MM 1M X 10 M X 25 MM 1M X 10 M X 32 MM 1M X 10 M X 36 MM LENGTH: 10 METER COLOR: BROWN NATURAL MADE FROM: 100% MEDIUM TOLONG FIBER IMPURITY: 2% MAX MOISTURE: 15% MAX PRICE: NEGOTIABLE PORT LOADING: HO CHI MINH PORT, VIET NAM PAYMENT TERM: L/C OR T/T
We are supplier of Reinforcement Bars. can supply REBARS as per below: -Size: 6mm to 50 mm -Length: 6 meters up to 16 meters -Packing: Once folded bundles available. hese corrugated steel bars are used as tension devices in the construction of concrete slabs and walls, as well as decorative/ornamental grille work. When used in concrete constructions, these help to strengthen and hold concrete when it is compressed, and come in a wide variety of sizes to fit various building construction needs. At ARC. AVAILABLE IN 3/8 (10mm), 5/8 (16mm), (20mm), (12mm), 1 (25mm) and 1 (32mm)
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
Specification : Size : Natural Size Fix karbon : 70% Moisture : 13% Volatile meter : 10-15% Ash content : �¢?�¤ 3% Maximum Calories : 6500- 7000 Packaging : Paper Bags 50kg Minimum Order : 27 Ton Production Capacity : 50 Ton / Month
Indonesia Origin Coconut Shell Charcoal Factory ***** NOT TRADING COMPANY !!! Multi Purposes Usage - China Carbonized Factory ***** Middle East Shisa maker ***** Specification : Natural Size or by demand Fix carbon : 70% - 75% *** Moisture Content under : 12% *** Volatile meter : Under 15% *** Ash content : Under 3% *** Calories : 6500- 7000 *** Packaging : PP Woven bags 25kg or by demand *** Loading in 40ft = 26 tons *** HS Code 44029010 ***** Cheapest Price in Indonesia with reasonable quality ***** Payment by Bank transfer ***
Appearance -Tan fine powder Odor - Aromatic odor Density - 430kg to 520kg per cubic meter Mesh Pattern - 98% pass through 15-hole mesh Moisture Content - Not more than - 15% PH Value - 6.0 to 8.0 Optimum pH - Optimum pH is 7 Temperature Active from 10 C to 65 C Optimum Temperature: 25 C to 65 C Bacteria Content 10 * 109/g; includes Bacillus subtilis, Bacillus licheniformis, Polymyxa, Aspergillus and Nocardia...,protease ,lipase ,amylase ,cellulase etc enzyme.
Appearance -Tan fine powder Odor - Aromatic odor Density - 430kg to 520kg per cubic meter Mesh Pattern - 98% pass through 15-hole mesh Moisture Content - Not more than - 15% PH Value - 6.0 to 8.0 Optimum pH - Optimum pH is 7 Temperature Active from 10 C to 65C Optimum Temperature: 25 C to 65 C Bacteria Content 10 * 109/g; includes Bacillus subtilis, Bacillus licheniformis, Polymyxa, Aspergillus and Nocardia...,protease ,lipase ,amylase ,cellulase etc enzyme.
High-Quality Birch Wood Logs and Lumber for Sale Birch Wood Logs Species: Silver Birch (Betula pendula), Yellow Birch (Betula alleghaniensis) Grade: Prime, Standard, Industrial Diameter: 250 mm to 800 mm Length: 2.4 meters to 5.0 meters Birch Wood Lumber Type: Edged and Unedged Grade: FAS, Select & Better, #1 Common, #2 Common Thickness: Rough Sawn: 25 mm, 32 mm, 38 mm, 50 mm, 63 mm, 75 mm, 100 mm Finished: 20 mm, 25 mm, 30 mm, 40 mm, 50 mm, 60 mm, 80 mm Width: Edged: 100 mm to 300 mm Unedged: Random widths Length: 2.0 meters to 5.0 meters Characteristics Color: Light yellow to pale white, sometimes with a reddish hue Grain: Straight with a fine, even texture Density: Approximately 0.65 g/cm�³ Hardness: Janka hardness of about 1,260 lbf (5,600 N) Moisture Content: Typically dried to 8-12% for indoor use, 12-15% for outdoor use Applications Furniture: Chairs, tables, cabinets Flooring: Durable and attractive hardwood flooring Plywood: Commonly used in the manufacture of high-quality plywood Turnery: Handles, toys, and other turned objects
Product Offerings: 1. Hardwood Logs & Lumber: Perfect for furniture, flooring, cabinetry, and decorative uses. Species Available: Oak, Mahogany, Teak, Walnut, Maple, Ash, Cherry, and more. Log Dimensions: Diameter: 30-90 cm Length: 2-6 meters Lumber Dimensions: Thickness: 25mm, 38mm, 50mm, 75mm Width: 100mm+ Length: 2-6 meters Grades: FAS, Select, #1 Common, #2 Common Moisture Content: Green, air-dried, or kiln-dried 2. Softwood Logs & Lumber: Ideal for construction, framing, and general-purpose applications. Species Available: Pine, Spruce, Fir, Douglas Fir, Cedar, and more. Log Dimensions: Diameter: 20-70 cm Length: 2-6 meters Lumber Dimensions: Thickness: 25mm, 38mm, 50mm, 75mm Width: 100mm+ Length: 2-6 meters Grades: Construction, Industrial, Select Structural Moisture Content: Green or kiln-dried Key Features: Sustainably Sourced: All products come from certified sustainable forests. Custom Dimensions: Available upon request to suit specific project requirements. Certification: FSC and PEFC certified; Grading certificates available. Packaging: Bundled logs, palletized lumber, custom packaging available. Terms of Sale: MOQ: N/A Payment Terms: Secure payment via wire transfer, LC, or other. Shipping: Worldwide shipping by sea, land, or air. Delivery lead times from 2-6 weeks Incoterms: FOB, CIF, DDP available.
Product Offerings: 1. Hardwood Logs & Lumber: Perfect for furniture, flooring, cabinetry, and decorative uses. Species Available: Oak, Mahogany, Teak, Walnut, Maple, Ash, Cherry, and more. Log Dimensions: Diameter: 30-90 cm Length: 2-6 meters Lumber Dimensions: Thickness: 25mm, 38mm, 50mm, 75mm Width: 100mm+ Length: 2-6 meters Grades: FAS, Select, #1 Common, #2 Common Moisture Content: Green, air-dried, or kiln-dried 2. Softwood Logs & Lumber: Ideal for construction, framing, and general-purpose applications. Species Available: Pine, Spruce, Fir, Douglas Fir, Cedar, and more. Log Dimensions: Diameter: 20-70 cm Length: 2-6 meters Lumber Dimensions: Thickness: 25mm, 38mm, 50mm, 75mm Width: 100mm+ Length: 2-6 meters Grades: Construction, Industrial, Select Structural Moisture Content: Green or kiln-dried Key Features: Sustainably Sourced: All products come from certified sustainable forests. Custom Dimensions: Available upon request to suit specific project requirements. Certification: FSC and PEFC certified; Grading certificates available. Packaging: Bundled logs, palletized lumber, custom packaging available. Terms of Sale: MOQ: N/A Payment Terms: Secure payment via wire transfer, LC, or other. Shipping: Worldwide shipping by sea, land, or air. Delivery lead times from 2-6 weeks Incoterms: FOB, CIF, DDP available.
Product Offerings: 1. Hardwood Logs & Lumber: Perfect for furniture, flooring, cabinetry, and decorative uses. Species Available: Oak, Mahogany, Teak, Walnut, Maple, Ash, Cherry, and more. Log Dimensions: Diameter: 30-90 cm Length: 2-6 meters Lumber Dimensions: Thickness: 25mm, 38mm, 50mm, 75mm Width: 100mm+ Length: 2-6 meters Grades: FAS, Select, #1 Common, #2 Common Moisture Content: Green, air-dried, or kiln-dried 2. Softwood Logs & Lumber: Ideal for construction, framing, and general-purpose applications. Species Available: Pine, Spruce, Fir, Douglas Fir, Cedar, and more. Log Dimensions: Diameter: 20-70 cm Length: 2-6 meters Lumber Dimensions: Thickness: 25mm, 38mm, 50mm, 75mm Width: 100mm+ Length: 2-6 meters Grades: Construction, Industrial, Select Structural Moisture Content: Green or kiln-dried Key Features: Sustainably Sourced: All products come from certified sustainable forests. Custom Dimensions: Available upon request to suit specific project requirements. Certification: FSC and PEFC certified; Grading certificates available. Packaging: Bundled logs, palletized lumber, custom packaging available. Terms of Sale: MOQ: N/A Payment Terms: Secure payment via wire transfer, LC, or other. Shipping: Worldwide shipping by sea, land, or air. Delivery lead times from 2-6 weeks Incoterms: FOB, CIF, DDP available.
Product Offerings: 1. Hardwood Logs & Lumber: Perfect for furniture, flooring, cabinetry, and decorative uses. Species Available: Oak, Mahogany, Teak, Walnut, Maple, Ash, Cherry, and more. Log Dimensions: Diameter: 30-90 cm Length: 2-6 meters Lumber Dimensions: Thickness: 25mm, 38mm, 50mm, 75mm Width: 100mm+ Length: 2-6 meters Grades: FAS, Select, #1 Common, #2 Common Moisture Content: Green, air-dried, or kiln-dried 2. Softwood Logs & Lumber: Ideal for construction, framing, and general-purpose applications. Species Available: Pine, Spruce, Fir, Douglas Fir, Cedar, and more. Log Dimensions: Diameter: 20-70 cm Length: 2-6 meters Lumber Dimensions: Thickness: 25mm, 38mm, 50mm, 75mm Width: 100mm+ Length: 2-6 meters Grades: Construction, Industrial, Select Structural Moisture Content: Green or kiln-dried Key Features: Sustainably Sourced: All products come from certified sustainable forests. Custom Dimensions: Available upon request to suit specific project requirements. Certification: FSC and PEFC certified; Grading certificates available. Packaging: Bundled logs, palletized lumber, custom packaging available. Terms of Sale: MOQ: N/A Payment Terms: Secure payment via wire transfer, LC, or other. Shipping: Worldwide shipping by sea, land, or air. Delivery lead times from 2-6 weeks Incoterms: FOB, CIF, DDP available.
