Polyimide Tapes Suppliers and Manufacturers

Polyimide consisting of a polyimide film and silicone adhesive designed for high temperature masking applications, including the protection of gold edge fingers and edge connectors during wave soldering and reflow soldering processes within the PCB assembly industry. It is used in electrical insulation application meeting class H requirements. Main Features: . Thin and conformable enabling masking of uneven sufaces. . Wide operaturing tempreture range up to 500��F. . Excellent electrical insulation . Remove clearly without adhesive residue after exposure to heat/chemical Applications: . Masking for protection of gold fingers and edge connectors during wave soldering and reflow soldering processes or solder dip process within the PCB assembly industry. . Release surface in fabrication of parts cured at elevated temperatures. . Widely used for electrical insulation on transformer, motor, coil, PCB masking and so on. PE film and Paper carton sizes.

Polyimide tape This tape takes polyimide film as backing material coated with imported silicone adhesive. It is high temperature resistant (grade h), acid and alkaline resistant, solvent resistant, radiation protection. It is applicable for the protection of pcb gold finger during the wave soldering under high temperature, high-class electrical and motor insulation and li batteries fixation, etc.

Polyimide film F46 Adhesive Tape 6251 Scope of Application: This product is made From Polyimide film painted with F46 adhesive on single surface or double surfaces and cut after drying, this tape applies to insulation material for electrical wire winding, which is molded through melting at the temperature of 350 -380fpC for half an hour Specification: 1. Appearance: the adhesive tape is clean and smooth, without air bubble and impurities 2. Size 1). Length: the length of a reel of adhesive tape is not less than 300m, the number of section is not more than 4 sections, minimum length of them is not less than 10m 2). Width: the width and its allowance of the adhesive tape is 10f+0.5 mm, 15f+0.5mm, 20f+1 mm, 25f+1 mm. 3). Thickness: nominal thickness and allowance of the adhesive tape: we can supply tapes with different thickness according to requirement of customers, their allowance isf+0.006mm or supply according to the requirement of custormer.

1.Used in masking operation during wave solder process on PCB, prevent electroplating liquid immersion and polluting. 2.Insulation and high heat dissipation. 3.High temperature fixing / holding. 4.Wiring in heater,power supply and flexible printed circuit board. 5.High temperature resistant,good insulation,Used in capacitor,solder mask, motor,wiring,wave solder. 6.Printable, for use in bicycle rim - tubeless system. 7.Optional with release liner, good for die cut into shape.

Polyimide Tape uses polyimide film as the backing material and is coated with silicone adhesive. It possesses excellent electrical insulation, dimensional stability, high temperature resistance, and leaves no defective gum when tearing off. This product can be used to masking Gold edge fingers and edge connectors during soldering and reflow soldering process within the PCB assembly industry. It is also used in electrical switches, motors, electronic transformers, relays, cables, coils, capacitors and electrical insulation applications meeting class H requirements in lithium battery.

Polyimide tape has a polyimide film baching with excellent heat resistant properties, and ul-510fr-certified. It is widely used in a variety of applications, such as the insulation of electrodes in lithium ion secondary batteries and applications requiring heat resistant masking, such as in part mounting reflow processes and the manufacturing processes of all types of electronic components. Features: Excellent electrical insulation properties Excellent dimensional stability Excellent heat resistance Extremely narrow width processing is available(from 1mm in width) Boasts a wide-ranging line-up Use: For heat resistant masking. For insulation of electrodes in lithium ion secondary batteries. For heat resistant electrical insulation. General properties: Backing material: polyimide film Adhesive: silicone Color: brown Total tape thickness: 0.04mm, 0.06mm, 0.065mm, 0.08mm, 0.1mm, 0.12mm, 0.165mm Dielectric strength: 6kv---12kv Adhesion to steel: 14kg/in Insulation class: 300degree celsius

Polyimide adhesive tape The polyimide film is a kind of heat resistant film which has nowadays been widely used in electric and electronic industry, energy sources and transportation industry, missile and space industry, atomical industry and so on. Our company is in the first place to produce polyimide film in china. The film which is produced on our two production line is in the lead in quality, quantity, secince and technology. To improve the properties of polyimide film, we introduce production line from u. S. In eighth-five project? period. This production line adopts a technology of casting film on both leteral and longitudinal direction. Products from this line have been improved in mechanical properties and lowered thickness tolerance and have strided for international market. From now on we can also offer heating-adhesive tape with f46&ptfe. The quality and character attained international standard! We have exported to korea taiwan singapore us, india, russia.

Polyimide adhesive tape The polyimide film is a kind of heat resistant film which has nowadays been widely used in electric and electronic industry, energy sources and transportation industry, missile and space industry, atomical industry and so on. Our company is in the first place to produce polyimide film in China. The film which is produced on our two production line is in the lead in quality, quantity, secince and technology. To improve the properties of polyimide film, we introduce production line from U. S. In eighth-five project? Period. This production line adopts a technology of casting film on both leteral and longitudinal direction. Products from this line have been improved in mechanical properties and lowered thickness tolerance and have strided for international market. From now on we can also offer heating-adhesive tape with F46&PTFE. The quality and character attained international standard! We have exported to Korea Taiwan Singapore US, India, Russia.

This product is made from Polyimide film painted with F46 adhesive on single surface or double surfaces and cut after drying, this tape applies to insulation material for electrical wire winding, which is molded through melting at the temperature of 350-380 ? for half an hour .

Kapton tapes are polyimide polymers in the form of a film. Kapton polyimide tapes are also known as high temperature tape or polyimide tape. Some of the characteristics of the kapton+ polyimide tape are: It maintains an excellent physical and electrical properties over a wide range of temperature from -269¼c (-452¼f) to as high as 260¼c (500¼f) It has excellent chemical and radiation resistance Standard adhesive type is silicon Kapton polyimide tape can be used: As mask in the electronic assembly As insulation for traction motor in the automotive industry As bar code labels on the pcb processed through wave soldering In flexible circuitry In nuclear reactors and outer space Our polyimide tapes are made in the p.R china. Kapton is a registered trademark of dupont Kapton tapes are produced in 1, 2 and 5 mil thickness. Low static products are primarily used in the electronic assembly where static charge is a problem. Length(m):33 Width(mm):within 500mm

Polyimide tape use polyimide film as a substrate and coated on high performance silicone pressure sensitive adhesive. Excellent shear resistance, excellent heat resistance, excellent chemical staility, radiation resistance, solvent resistance and easy for die cut. Suitable for electronic circuit board wave soldering masking, electrical insulation and high-end finger protection, motor insulation, as well as lithium battery positive and negative and ears fixed. Now it is widely used in aviation, marine, spacecraft, missile, rockets, atomic energy, electrical and electronic industry, etc.

(1) polyimide pressure-sensitive adhesive tape with silicone resin This kind of tape is made of polyimide material with heat-resistant silicone adhesive, which shows excellent dielectric insulation properties, high heat resistant, excellent solvent resistant, mask-off gold finger contacts during wave soldering, and is widely used for electrical insulation on motor, transformer, coils, pcb making and so on. (2) polyimide pressure-sensitive adhesive tape with acrylic resin This kind of tape is made of polyimide material with acrylic adhesive, which shows excellent dielectric insulation properties, high heat resistant and is widely used for electrical insulation on motor, transformer, coils and so on. Product supply: Packing: carton Min qty: 1000 m2 each size in a lot. Shelf life: one year from the data of delivery. It can still be used if it is qualified by testing after one year according to above technical requirement.

High Temperature Golden Kapton Polyimide Film PI Tape Descriptions: High Temperature Golden Kapton Polyimide PI Tape also known as Kapton tape or Polymide Tape, is made of polyimide film with heat resistant silicone adhesive to withstand temperature up to 260ºC (500â??), packaged in a 36 yard (33m) roll. Features: Thin and conformable enabling masking of uneven surfaces Wide operating temperature range up to 500°F Removes cleanly without adhesive residue after exposure to heat High performance silicone adhesive High strength backing provides superior resistance to puncture and tear Resistance to chemical attack Applications: Gold finger mask of printed circuit boards during wave soldering High temperature mask for high temperature powder coating Electrical insulation for traction motor, transformer, cable, and capacitor Bar code labels on PCB Semiconductor manufacturing

Jacobs 18 Polyimide film single coated with a cured sillicone adhesive system, 60 total Thickness. Recommended for a variety of high temperature protetion and insulation application ( 180 degree C thermal class H). PRODUCT BENEFITS Good resistance to most alcohols, esters, ketones and oil Remove Cleanly and one piece after being exposed to high tempertures High strength backing provides superior puncture, tear and abrasion resistance Resistant to chemical attack Excellent thin electrical insulation UL 510 approval - Guide OANZ 2: File E103655 Flame retardant Service temperature : 180 degree C continuous - Thermal Class H Can be used short term up to temperatures of 400 degree C Resists baking tempuratures up to 260 Degree C For 20 min High temperature masking Adhesive

Polyimide silicone/acrylic adhesive tape is made of polyimide film single or double coated with heat-resistant silicone or acrylic adhesive, with excellent properties of heat resistance, electrical insulation, solvent resistance and radiation protection, friendly to human-beings and environment. Ei650/640 offers better elongation at rupture, and is used for electrical insulation of electrical equipment and high temperature insulation, such as, motors, li batteries etc. Ei650rl/640rl has release liner of paper or pet film material with release agents of paraffin, silicone or fluoride-ion, used for die-cut of all kinds of high temperature press sensitive small film parts.

Company Introduction: Shandong Xinhongyun New Material Technology Co., Ltd.Located in weifang city, shandong provience., is a ISO certified professional & reliable manufacture of electrical insulation materials-BOPI FILM(polyimide film). our annual prodcution capacity is 150-200MT.main thickness 12.5um,25um & 50um, main width 514mm,520mm,1028mm&1040mm.main color: yellow, red, matte black. we have strict quality inspection system ,we trust we can supply you best quality product with high quality Description Polyimide (PI) is a polymer of imide�?? monomers, also know as heat resistant film or high temperature film. With their high heat-resistance, polyimide enjoys diverse applications in roles demanding rugged organic materials.�?? Polyimide film�?? is ideal for insulating circuit boards, high temperature powder coating and transformers manufacturing. Polyimide film provides excellent electrical, thermal, physical and chemical properties�?? over a wide temperature range between -269�??�?�ºC�?? (-452F) and 400C�?? (752F) making them superio�?? for electrical insulation applications.�?? Polyimide film can be laminated, metalized,�?? punched, formed or adhesive coated. BOPI film has better thickness tolerancem,highter physical, chemical,and electrical properties. It�?? is the recommended choice for applications that require an all-polyimide film with an excellent balance of properties over a wide range of�?? temperatures. we�?? can provide both standard and custom polyimide film solutions for a customer depending on their needs. Slitting and Packging Width:520mm~1040mm Core ID:76mm(3'')or 152mm(6''),Core materials:Paper or plastic Packaging:PE film packaged,with aluminum foil and foam,Suspended packing. Storage:The film should be stored in a dry and clean indoor,should be suspended in the box. Should not erect,close to the fire,heat or direct sunlight. Applications Wire&cable Insulation, slot liner insulation,interlayer insulation in Motor,transformer etc. Backing material for Polyimide coating or composites Flexible Printed Circuits Board(F-PCB) Polyimide Label Polyimide tubing

Company Introduction: Shandong Xinhongyun New Material Technology Co., Ltd.Located in weifang city, shandong provience., is a ISO certified professional & reliable manufacture of electrical insulation materials-BOPI FILM(polyimide film). our annual prodcution capacity is 150-200MT.main thickness 12.5um,25um & 50um, main width 514mm,520mm,1028mm&1040mm.main color: yellow, red, matte black. we have strict quality inspection system ,we trust we can supply you best quality product with high quality Description Polyimide (PI) is a polymer of imide� monomers, also know as heat resistant film or high temperature film. With their high heat-resistance, polyimide enjoys diverse applications in roles demanding rugged organic materials.� Polyimide film� is ideal for insulating circuit boards, high temperature powder coating and transformers manufacturing. Polyimide film provides excellent electrical, thermal, physical and chemical properties� over a wide temperature range between -269�ºC� (-452F) and 400C� (752F) making them superio� for electrical insulation applications.� Polyimide film can be laminated, metalized,� punched, formed or adhesive coated. BOPI film has better thickness tolerancem,highter physical, chemical,and electrical properties. It� is the recommended choice for applications that require an all-polyimide film with an excellent balance of properties over a wide range of� temperatures. we� can provide both standard and custom polyimide film solutions for a customer depending on their needs. Slitting and Packging Width:520mm~1040mm Core ID:76mm(3'')or 152mm(6''),Core materials:Paper or plastic Packaging:PE film packaged,with aluminum foil and foam,Suspended packing. Storage:The film should be stored in a dry and clean indoor,should be suspended in the box. Should not erect,close to the fire,heat or direct sunlight. Applications Wire&cable Insulation, slot liner insulation,interlayer insulation in Motor,transformer etc. Backing material for Polyimide coating or composites Flexible Printed Circuits Board(F-PCB) Polyimide Label Polyimide tubing

Polyimide Film Adhesive Tape works on any environmental and made with general purpose film with silicone adhesive. This film is excellent for electrical insulation properties, high temperature resistant, and solvent resistant. It is great for Electric task, 3D printer platform, BGA heating, soldering task. It is color in Amber, and prevent overheat electrical component.  2,Technical data Color:Amber Thickness:40-80(um) Adhesive:Silicone adhesive Backing thickness:Polyimide 25/38/75(um) Popular size :50mic/60micx12mm/18mm/19mm/24mm/36mmx33m Standard roll length:33m Adhesion to steel:26N/In Elongation at Break:40% Temperature :260°C Dielectric strength:4000 Static charge(v):

6251 Polyimide tape is a general polyimide film that is coated or laminated on one or both sides with FEP Fluoropolymer, which imparts heat sealability, provides a moisture barrier, and enhances chemical resistance. 6251 Polyimide tape is recommended in applications that require a heat bondable film, or moisture and chemical resistance beyond the capabilities of uncoated polyimide film. Applications Tubing Heater circuits Heat sealable bags Automotive diaphragms and manifolds Electrical insulation Typical Properities NO. Item Index 1 Tensile Stength (MPa) 156 135 2 Elongation at Break 76 93 3 Striping Force Tape to Tape (N/25mm) 4 Tape to copper 4 4 Surface Resistivity 1.5 1015 5 Breakdown Strength (MV/m) 90 6 Volume Resistivity (m) 2.1 1014 7 Dielectric Constant 50Hz 2-3 8 Dissipation Factor 0.0012 Polyimide film FEP Series is polyimide film coated with FEP on one or both side, imparts heat sealability, provides a moisture barrier, and enhances chemical resistance. Mainly used in magnet wire insulation, formed coil insulation, CPTC and release liner. Type Polyimide film FEP Constructions In this series order code of three digits, the first and third digit represents the normal thickness of the coating FEP, the symbol 9 is used to represent 12.7um (0.5 mil) 6 to 2.54 um. HF is used to represent polyimide film coated with FEP on single side, and FHF to double side. Type FEP PI Film FEP Total um um um um HF019 25.4 12.7 38.1 HF019-B 30 10 40 HF019-C 40 10 50 HF011 25.4 25.4 50.8 HF021 50.8 25.4 76.2 FHF616 2.54 25.4 2.54 30.48 FHF616-B 3 25.4 3 31.4 FHF616-C 6.35 25.4 6.35 38.1 FHF919 12.7 25.4 12.7 50.8 FHF919-B 10 30 10 50 FHF919-C 10 40 10 60 FHF929 12.7 50.8 12.7 76.2 Thickness Tolerance % 10 Other size should be talked if we could produce.