This product is made from Polyimide film painted with F46 adhesive on single surface or double surfaces and cut after drying, this tape applies to insulation material for electrical wire winding, which is molded through melting at the temperature of 350-380 ? for half an hour .
Polyimide adhesive tape is made of polyimide film with acrylic resin adhesive. Application:The heat resistance grade of this product is E grade, which is a transparent film with good transparency, flexibility, high mechanical strength and dielectric properties, uniform thickness, and shiny surface. It is used for low-voltage motors, electrical coils, inter-turns, end wrapping insulation, gasket insulation, magnet wire wrapping insulation, E and B class electrical duct insulation and capacitor dielectric, cable wrapping, transformers and composite materials manufacturing, and can also be used in packaging, FRP, clothing lining collar and other occasions. Nominal thickness:
High Temperature Golden Kapton Polyimide Film PI Tape Descriptions: High Temperature Golden Kapton Polyimide PI Tape also known as Kapton tape or Polymide Tape, is made of polyimide film with heat resistant silicone adhesive to withstand temperature up to 260ºC (500â??), packaged in a 36 yard (33m) roll. Features: Thin and conformable enabling masking of uneven surfaces Wide operating temperature range up to 500°F Removes cleanly without adhesive residue after exposure to heat High performance silicone adhesive High strength backing provides superior resistance to puncture and tear Resistance to chemical attack Applications: Gold finger mask of printed circuit boards during wave soldering High temperature mask for high temperature powder coating Electrical insulation for traction motor, transformer, cable, and capacitor Bar code labels on PCB Semiconductor manufacturing
Polyimide silicone/acrylic adhesive tape is made of polyimide film single or double coated with heat-resistant silicone or acrylic adhesive, with excellent properties of heat resistance, electrical insulation, solvent resistance and radiation protection, friendly to human-beings and environment. Ei650/640 offers better elongation at rupture, and is used for electrical insulation of electrical equipment and high temperature insulation, such as, motors, li batteries etc. Ei650rl/640rl has release liner of paper or pet film material with release agents of paraffin, silicone or fluoride-ion, used for die-cut of all kinds of high temperature press sensitive small film parts.
Thermal Conductive Insulation Adhesive Back Copper Foil Tape Material: Copper foil, Copper foil, Nano carbon, Thermal materials Use: Carton Sealing Adhesive Side: Single Sided Adhesive: Acrylic Adhesive Type: Hot Melt Feature: Heat-Resistant Design Printing: No Printing Place of Origin: Guangdong, China (Mainland) Brand Name: Laimeisi Model Number: LMS Product name: Thermal Conductive Insulation Adhesive Back Copper Foil Tape Color: Gold Size: Customized Size Certification: SGS, ISO,Reach, Rohs Surface: Polished Length: 100m Thickness: 55-75um Shape: Customised Thermal conductivity: 560W/mk Packaging & Delivery Packaging Details: Following the customer request Delivery Detail: Shipped in 3 days after payment 1. Grade: SGS, REACH, ROHS 2. Size: customized 3. Standard: LMS-TB Product Nameï¼?Thermal Conductive Insulation Adhesive Back Copper Foil Tape Materialï¼?Copper foil, Nanocarbon, Thermal materials Colorï¼?Black Sizeï¼?Customized size Gradeï¼?SGS, ROHS, Reach Usedï¼?Thermal conductive, high temperature, Led, PC, Heat sink...etc Thicknessï¼?55um, 75um Thermal Conductivityï¼?560w/mk Glueï¼? 3M Feature of Thermal Conductive Insulation Adhesive Back Copper Foil Tape 1.Excellent resistance to heat (dry air), at +260o C continuous and +260o C intermittent.Remains flexible at low temperatures of -40oC. 2.Resistant to ultra-violet light, ozone and weathering processing,pharma ceutical and cosmetic manufacturing area. 3.Good electrical insulation properties 4.Keep constant even at high temperatures. 5.Resistance to chemicals; moderate resistance to general chemical products. Application of Thermal Conductive Insulation Adhesive Back Copper Foil Tape Cooling fin and the heat diffusion film, electronic equipment cooling, Other application need to heat or Conductive, eg: LED light, CPU, GPU, IC, PC...etc.
Company Introduction: Shandong Xinhongyun New Material Technology Co., Ltd.Located in weifang city, shandong provience., is a ISO certified professional & reliable manufacture of electrical insulation materials-BOPI FILM(polyimide film). our annual prodcution capacity is 150-200MT.main thickness 12.5um,25um & 50um, main width 514mm,520mm,1028mm&1040mm.main color: yellow, red, matte black. we have strict quality inspection system ,we trust we can supply you best quality product with high quality Description Polyimide (PI) is a polymer of imide�?? monomers, also know as heat resistant film or high temperature film. With their high heat-resistance, polyimide enjoys diverse applications in roles demanding rugged organic materials.�?? Polyimide film�?? is ideal for insulating circuit boards, high temperature powder coating and transformers manufacturing. Polyimide film provides excellent electrical, thermal, physical and chemical properties�?? over a wide temperature range between -269�??�?�ºC�?? (-452F) and 400C�?? (752F) making them superio�?? for electrical insulation applications.�?? Polyimide film can be laminated, metalized,�?? punched, formed or adhesive coated. BOPI film has better thickness tolerancem,highter physical, chemical,and electrical properties. It�?? is the recommended choice for applications that require an all-polyimide film with an excellent balance of properties over a wide range of�?? temperatures. we�?? can provide both standard and custom polyimide film solutions for a customer depending on their needs. Slitting and Packging Width:520mm~1040mm Core ID:76mm(3'')or 152mm(6''),Core materials:Paper or plastic Packaging:PE film packaged,with aluminum foil and foam,Suspended packing. Storage:The film should be stored in a dry and clean indoor,should be suspended in the box. Should not erect,close to the fire,heat or direct sunlight. Applications Wire&cable Insulation, slot liner insulation,interlayer insulation in Motor,transformer etc. Backing material for Polyimide coating or composites Flexible Printed Circuits Board(F-PCB) Polyimide Label Polyimide tubing
Company Introduction: Shandong Xinhongyun New Material Technology Co., Ltd.Located in weifang city, shandong provience., is a ISO certified professional & reliable manufacture of electrical insulation materials-BOPI FILM(polyimide film). our annual prodcution capacity is 150-200MT.main thickness 12.5um,25um & 50um, main width 514mm,520mm,1028mm&1040mm.main color: yellow, red, matte black. we have strict quality inspection system ,we trust we can supply you best quality product with high quality Description Polyimide (PI) is a polymer of imide� monomers, also know as heat resistant film or high temperature film. With their high heat-resistance, polyimide enjoys diverse applications in roles demanding rugged organic materials.� Polyimide film� is ideal for insulating circuit boards, high temperature powder coating and transformers manufacturing. Polyimide film provides excellent electrical, thermal, physical and chemical properties� over a wide temperature range between -269�ºC� (-452F) and 400C� (752F) making them superio� for electrical insulation applications.� Polyimide film can be laminated, metalized,� punched, formed or adhesive coated. BOPI film has better thickness tolerancem,highter physical, chemical,and electrical properties. It� is the recommended choice for applications that require an all-polyimide film with an excellent balance of properties over a wide range of� temperatures. we� can provide both standard and custom polyimide film solutions for a customer depending on their needs. Slitting and Packging Width:520mm~1040mm Core ID:76mm(3'')or 152mm(6''),Core materials:Paper or plastic Packaging:PE film packaged,with aluminum foil and foam,Suspended packing. Storage:The film should be stored in a dry and clean indoor,should be suspended in the box. Should not erect,close to the fire,heat or direct sunlight. Applications Wire&cable Insulation, slot liner insulation,interlayer insulation in Motor,transformer etc. Backing material for Polyimide coating or composites Flexible Printed Circuits Board(F-PCB) Polyimide Label Polyimide tubing
Anti-static ESD Polyimide Film PI Tape,also call ESD Polyimide Tape,also known as ESD Kapton tape, consists of low static polyimide film coated with silicone adhesive to withstand temperature up to 260â?? (500, packaged in a 36 yard (33m) roll. This tape generates extremely low levels of triboelectric charge when it is unwound from the roll and also when removed from most surfaces on which it is placed. This makes the tape an excellent choice for use near electronic components and assemblies. Features: Excellent electrostatic dissipation High temperature resistance up to 260â?? (500 No adhesive residue after removal Good adhesion Flame resistance UL V-0 Chemical and radiation resistance Applications: Anti-static PI Tape is the optimal product for electrostatic dissipation. This tape can be used for wave soldering, masking of printed circuit boards during conformal coating, gold leads and other components on boards filled with sensitive integrated circuits.
6251 Polyimide tape is a general polyimide film that is coated or laminated on one or both sides with FEP Fluoropolymer, which imparts heat sealability, provides a moisture barrier, and enhances chemical resistance. 6251 Polyimide tape is recommended in applications that require a heat bondable film, or moisture and chemical resistance beyond the capabilities of uncoated polyimide film. Applications Tubing Heater circuits Heat sealable bags Automotive diaphragms and manifolds Electrical insulation Typical Properities NO. Item Index 1 Tensile Stength (MPa) 156 135 2 Elongation at Break 76 93 3 Striping Force Tape to Tape (N/25mm) 4 Tape to copper 4 4 Surface Resistivity 1.5 1015 5 Breakdown Strength (MV/m) 90 6 Volume Resistivity (m) 2.1 1014 7 Dielectric Constant 50Hz 2-3 8 Dissipation Factor 0.0012 Polyimide film FEP Series is polyimide film coated with FEP on one or both side, imparts heat sealability, provides a moisture barrier, and enhances chemical resistance. Mainly used in magnet wire insulation, formed coil insulation, CPTC and release liner. Type Polyimide film FEP Constructions In this series order code of three digits, the first and third digit represents the normal thickness of the coating FEP, the symbol 9 is used to represent 12.7um (0.5 mil) 6 to 2.54 um. HF is used to represent polyimide film coated with FEP on single side, and FHF to double side. Type FEP PI Film FEP Total um um um um HF019 25.4 12.7 38.1 HF019-B 30 10 40 HF019-C 40 10 50 HF011 25.4 25.4 50.8 HF021 50.8 25.4 76.2 FHF616 2.54 25.4 2.54 30.48 FHF616-B 3 25.4 3 31.4 FHF616-C 6.35 25.4 6.35 38.1 FHF919 12.7 25.4 12.7 50.8 FHF919-B 10 30 10 50 FHF919-C 10 40 10 60 FHF929 12.7 50.8 12.7 76.2 Thickness Tolerance % 10 Other size should be talked if we could produce.
Polyimide Film Adhesive Tape works on any environmental and made with general purpose film with silicone adhesive. This film is excellent for electrical insulation properties, high temperature resistant, and solvent resistant. It is great for Electric task, 3D printer platform, BGA heating, soldering task. It is color in Amber, and prevent overheat electrical component. 2,Technical data Color:Amber Thickness:40-80(um) Adhesive:Silicone adhesive Backing thickness:Polyimide 25/38/75(um) Popular size :50mic/60micx12mm/18mm/19mm/24mm/36mmx33m Standard roll length:33m Adhesion to steel:26N/In Elongation at Break:40% Temperature :260°C Dielectric strength:4000 Static charge(v):
Use Bag Sealing Adhesive Side Double Sided Material Polyimide Polyimide Tapes is made from specially treated base coated Polyimide film having adhesive of silicon or Acrylic coating on another side. Features: It has the sound withstand voltage, High-temperature resistance and solvent resistance features. Uses: The product (Polyimide-Kapton tapes) has mainly been utilized in the gold finger protection during the components mounting on printed circuit board (PCB) through wave soldering, transformer insulation binding, lithium cell( battery) polar ear fixing, and other occasions where need heat-resistance.
Polyimide film F46 Adhesive Tape 6251 Scope of Application: This product is made From Polyimide film painted with F46 adhesive on single surface or double surfaces and cut after drying, this tape applies to insulation material for electrical wire winding, which is molded through melting at the temperature of 350 -380fpC for half an hour Specification: 1. Appearance: the adhesive tape is clean and smooth, without air bubble and impurities 2. Size 1). Length: the length of a reel of adhesive tape is not less than 300m, the number of section is not more than 4 sections, minimum length of them is not less than 10m 2). Width: the width and its allowance of the adhesive tape is 10f+0.5 mm, 15f+0.5mm, 20f+1 mm, 25f+1 mm. 3). Thickness: nominal thickness and allowance of the adhesive tape: we can supply tapes with different thickness according to requirement of customers, their allowance isf+0.006mm or supply according to the requirement of custormer.
Standard number: 2006 GB/T13542.6-2006 Application range: The polyimide film is to be produced by cast method, which has High temperature resistance, resistance to radiation and excellent dielectric properties, applicable to electrical insulating of the class H electric motor and other electrical equipments , and other use electrical insulating materials. A. Technical requirements 1. Appearance: Film surface is bright and clean, not due, tear, particle, bubbles, Pinhole and foreign material defects ;Edge is tidy, without damage; Films supply in rolls. 2. Size 2.1. Thickness and allowable deviation: The standard thickness(um) 12.5 25 40 50 75 100 125 175 200 The allowable deviation(um) +1 +2 +2 +2 +3 +4 +4 +5 +5 -1 -1 -2 -2 -3 -3 -4 -5 -5 Note: Supplying according to customer request with thickness 12.5-22.5 um, allowable deviation can be negotiated by both sides. 2.2. Width: no less than 250 mm, deviation +/-1.6mm. According to the needs of the users, tape can be cut with different specifications. 2.3. Length: Supplying according to the requirement of customer. 2.4. Performance requirements Serial number Index name Unit Index 25um 40um 50um 75um 100um 1 density Kg/m3 1425 10 2 tensile strength horizontally Mpa Y165 vertically 3 elongations horizontally and vertically % Y40 Y50 4 shrinkage rate horizontally and vertically 150 400 % 0.35 2.5 5 industrial frequency electric strength 48H2 62H2 v/um Y240 Y200 Y180 Y160 6 surface resistance,200 Y1.0X1014 7 Volume resistance,200 M Y1.0X1010 8 Relative permittivity 48 62Hz - 3.5 0.4 9 dielectric power factor 48 62Hz - 4.0X103 10 long-term heat resistance temperature index - Y180. 1. Film should be wrapped in a tube on core and supply in rolls; Each volume in a plastic bag packing and seal, placing in dry and clean case 2. Each box packaging should specify model or type, product name, specification, batch number, gross weight, net weight, manufacturing date, manufacture ¡¥s name, and product test report. At the same time, marked "Moisture proof" "Prevent Impact" and other words in packing body. 3.Film should be stored in a dry and clean indoor, from the date of original shipment, shelf life for two years, more than storage life according to the standard check again, qualified can still use. 4. In storage and transport process, should avoid damp and mechanical damage.
Can supply: ALUMINIUM LAMINATED FILM ROLLS, PRINTED STOCK LOT. Post industrial. Clean. Pack: in big bags. Can load in 1x40HC container aprox. 26 - 28 MT net. Ready for shipment. Photos available upon request. If you are interested kindly contact us for more information. You are welcome to visit our company premises and supervise our materials. Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC
Polyimide adhesive tape The polyimide film is a kind of heat resistant film which has nowadays been widely used in electric and electronic industry, energy sources and transportation industry, missile and space industry, atomical industry and so on. Our company is in the first place to produce polyimide film in china. The film which is produced on our two production line is in the lead in quality, quantity, secince and technology. To improve the properties of polyimide film, we introduce production line from u. S. In eighth-five project? period. This production line adopts a technology of casting film on both leteral and longitudinal direction. Products from this line have been improved in mechanical properties and lowered thickness tolerance and have strided for international market. From now on we can also offer heating-adhesive tape with f46&ptfe. The quality and character attained international standard! We have exported to korea taiwan singapore us, india, russia.
Polyimide adhesive tape The polyimide film is a kind of heat resistant film which has nowadays been widely used in electric and electronic industry, energy sources and transportation industry, missile and space industry, atomical industry and so on. Our company is in the first place to produce polyimide film in China. The film which is produced on our two production line is in the lead in quality, quantity, secince and technology. To improve the properties of polyimide film, we introduce production line from U. S. In eighth-five project? Period. This production line adopts a technology of casting film on both leteral and longitudinal direction. Products from this line have been improved in mechanical properties and lowered thickness tolerance and have strided for international market. From now on we can also offer heating-adhesive tape with F46&PTFE. The quality and character attained international standard! We have exported to Korea Taiwan Singapore US, India, Russia.
butyl tapes are waterproof and insulated tapes Focus-6400 butyl tapes are waterproof and insulated tapes with strong adhesion and adaptation to irregular surfaces. It exhibits excellent performance in waterproof, sealing and anti-UV to antenna feeder and cable connection box. Main Specification (Customized size is acceptable.) 2mm*40mm*20m * 8.5mm * 8mm * 10mm * 12mm Main Color - Black Technical Data Product Series FOCUS-6400 Series Application Communication Industry Elongation 400% Heat Resistance 90, no flowing within 2h Low Temperature Flexibility 40, no crack on surface within 24h Tensile Strength 175KPa Anti UV non-hardening and no cracks within in 2000h Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet. Advantages Strong adhesion and adaptation to irregular surface. Good compatibility with various cables. Wide application temperature range. Excellent performance in weather resistance, waterproof sealing and anti-aging. Applications Provide waterproof and sealing protection to communication base station and antenna feeder. Provide waterproof and sealing protection to cable connection box
Butyl Tapes Are Waterproof And Insulated Tapes Focus-6400 butyl tapes are waterproof and insulated tapes with strong adhesion and adaptation to irregular surfaces. It exhibits excellent performance in waterproof, sealing and anti-UV to antenna feeder and cable connection box. Main Specification (Customized size is acceptable.) 2mm*40mm*20m * 8.5mm * 8mm * 10mm * 12mm Main Color - Black Technical Data Product Series FOCUS-6400 Series Application Communication Industry Elongation - 400% Heat Resistance 90, no flowing within 2h Low Temperature Flexibility Â40, no crack on surface within 24h Tensile Strength 175KPa Anti UV non-hardening and no cracks within in 2000h Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet. Advantages Strong adhesion and adaptation to irregular surface. Good compatibility with various cables. Wide application temperature range. Excellent performance in weather resistance, waterproof sealing and anti-aging. pplications Provide waterproof and sealing protection to communication base station and antenna feeder. Provide waterproof and sealing protection to cable connection box
Corona resistance polyimide films ,not only with ordinary polyimide film electrical properties, good heat resistance and resistance chemicals, but also with the super corona resistance and good thermal conductivity performance, mainly apply to sintering electromagnetic winding wire ,traction motor, wind generators, and the special motor turn-to-turn insulation and heat insulation, the heat resistance level is a class C. The technical requirements: 1. Type CR type: Corona resistance polyimide film without any coating FCR type: Corona resistance polyimide film with F46 single side coating FCRF type: Corona resistance polyimide film with F46 double side coating 2. Appearance its appearance is golden brown, translucent, the surface is bright and clean, no wrinkles, tear, particles, bubble, pinhole and foreign material defects. Its edge is tidy, and without damage. 3. Thickness and allowable deviation Model CR type FCR type FCRF type Thickness(um) 25 38 50 Allowable deviation(um) 2 3 3 Note: coating thickness may be based on customer demand in 5 ~ 12.5 um range regulation. 4. Width and allowable deviation Width may cut according to the customer request within 600 -1050 mm. Each volume length is for 500-1000 m; Each volume joints for final product are not more than three, the proportion of volumes with joints vs the total volumes number in the one order is not more than 25%,the shortest length is more than 300 m; Single plate or roll products joint numbers are not more than three, the shortest length is more than 300 m. FCR type and FCRF type using thermal bonding lap. 5. Film marks: -Every single volume label marked: batch number, specification, net weight;Every single plate or roll labeling: specification. -Package should have obvious and firm mark; -The format of the packing cases is confirmed by purchase order related terms. Serial Number Type CR FCR FCRF 1 Corona resistance life (h) 1 KV voltage, frequency 20 KHz temperature 90 2 pulse rise time 400 ns Y80 Y80 Y80 2 Industrial frequency electric intensity (v/um) Y200 Y120 Y100 3 Surface resistivity 1X1014 1X1014 1X1014 4 Volume resistivity 1 1X1010 1X1010 1X1010 5 Relative permittivity (48-62 Hz ac) 3.2 0.4 3.2 0.4 3.2 0.4 6 Dielectric power factor (48-62 Hz ac) 13.5X10-3 13.5X10-3 13.5X10-3 7 Tensile strength (Mpa) : Y135 Y80 Y80 8 Elongation at break (%) Y40 Y40 Y40. 1. Testing method: According to the ICE62068-1-2003/ GB /T13542.6-2006 "electrical insulation, part 6," Polyimide film for electrical insulation regulation experimental method. 2. Film packaging: Film roll with plastic film packaging, outer with shockproof foam cushion packaging, and support in place in the package overhead, make the film in the transportation conditions often get fully protected without damage, each volume end article sticker marking. 3. Dust is strictly prohibited in the packing box internal. 4. Film should be stored in a dry and clean indoor, film roll to be supported in the box, placed suspended and not be erected. It should not be close to the fire, central heating or exposed to direct sunlight. 5. Products should avoid damp and mechanical damage in the storage and transport. 6. Film storage period is for two years after COA issued date. Expired films are still available after again qualified according to the product standards inspection.
Adopting unique production technology, Focus- 6300 buytl tapes are mainly made of butyl rubber supplemented by other auxiliaries and fillers, with the superior high polymer materials. With its strong adhesion property and air-tight property, our waterproof sealing butyl tapes are environmental and solvent-free. Main Specification (Customized demand sare acceptable.) 6mm*8m 8mm*6m 10mm*4.57m Main Color - black Technical Data Product Series FOCUS-6300 Series Application Automotive Industry Elongation 500% Heat Resistance 90, no flowing within 2h Low Temperature Flexibility 40, no crack on surface within 24h Peel Strength 23N/cm Tensile Strength 230KPa Anti UV non-hardening and no cracks within in 2000h Corrosivity Non-corrosive to galvanized sheet, aluminum sheet and coppersheet. Advantages Strong adhesion, high tensile strength, excellent elasticity and extensibility. It can fully accommodate to the surface that it attached to Excellent performance in non-corrosive, weather resistance and adaptation. Applications Provide waterproof protection to car doors waterproof membrane. Provide waterproof and sealing protection to the battery of new energy automobile. Other waterproof applications on cars and new energy cars