CAS NO 32289-58-0
General Name Polihexanide
Abbr PHMB
Active ingredient 20%
White powder or almost colorless or pale-yellow transparent liquid
Prompt shipment within 3 weeks from order confiramtion.
Packaging can be made according to your requirements.
PHMG packaging
PHMB powder can be put into various plastic drums, such as 50kg, 45kg, 40kg, 30kg, 25kg, 20kg, 15kg, 10kg, 5kg, 2kg, 1kg, 0.5kg, etc.
25kg/plastic drum, 200kg/plastic drum for PHMB liquid.
1000kg IBC drum for PHMB liquid.
All packaging can provided be with or without pellets.
PHMG packaging can be made according to your requirements.
PHMB 20% solution is recognized as the safest and the most efficient broad-spectrum antibacterial agent in the 21st century. It is colorless and tasteless, low bacterial inhibition concentration, broad spectrum, low toxicity.It can form a layer of cations on the surface of article, which can inhibit bacteria for a long time. It also has no bacteria drug resistance.
Technical Index:
Appearance: Colorless or Light yellow transparent liquid
Content of Active Substance (%): â?¥20.0
PH value: 4.5-6.5
Density (@20 g/cm3): 1.1+/-0.1
Viscosity (CP): 5
Boiling Point (): 102
Flash Point: Does not glow when boiling
Dispersibility in water: Compatible with water in any ratio
Usage:
PHMB 20 has the ability to kill bacteria, fungi, algae and yeast. It acts on the cell wall or cell membrane of bacteria, fungi, algae, Combine with phospholipid compounds, Rapid breakdown of their membrane system, making the Intracellular Substance outflow, And inhibit certain enzyme activities that attached in the cells, thereby achieving antibacterial and antifungal effects. This product is low in toxicity and long-term use, Compared with polyhexamethylene monoterpene, This product has better antibacterial effect on fungi and yeast. The antibacterial effect of this product is characterized by high efficiency, safety, stability, long-term effect, convenient use and environment friendly
Application:
1) Water Treatment:
a. Swimming pool disinfection, as an alternative to chlorine;
b. For industrial water(cooling tower, â?¦)
c. Surface disinfecting: -hospitals; -algaecide for concrete surfaces; -all purpose surfaces disinfectant
2) Cosmetics
Lotion:This product is used as the main bactericidal ingredient in the compound hand sanitizer. When the content of the product is 250-300 mg / l, it has a good killing effect on cell propagules and yeasts.
3) Daily care products
This product can be used for antibacterial preservation of disposable wet wipes, wet towels, napkins and antibacterial hand sanitizers; it is used for lens disinfectant.
4) Aquaculture
Adding this product to the aquatic water system can inhibit bacteria in the water system and prevent aquatic diseases such as red legs, bad eyes and rotten plaque caused by bacteria.
5) Textile
This product can be used for antibacterial finishing of textiles. Due to its good heat stability, it can be added to the melt spinning solution to make antibacterial synthetic fibers. It can also be used in antibacterial laundry liquid.
Packaging: 25kg/drum; 200kg/drum;
Product name: Poly(hexamethylenebiguanide)hydrochloride
In Short name: PHMB 98 Powder
CAS No.: 32289-58-0
EINECS No.:1308068-626-2
Molecular formula: (C8H17N5)n.xHCl
Technical Index:
Appearance(@25): white powder solid
Solids content (%): 98.00%
PH Value (1% 25): 6.0 - 8.0
Description
PHMB is a new kind of multi-purpose bactericidal and bacteriostatic polymer. It will produce ionization in aqueous solution. Its hydrophilic part contains strong positive electricity. It can absorb all kinds of bacteria and viruses which are usually negative electricity, enter into the cell membrane, inhibit the synthesis of liposomes in the membrane, cause the cell to die, and achieve the best bactericidal effect.
Features:
-Long lasting and broad-spectrum kill and inhibit various types of microbial;
-Not easy to produce antibiotic-resistant bacteria;
-Non-toxic to humans and higher animals;
-No skin and mucous membrane irritation;
-No corrosion on the surface treatment.
Application Industry:
PHMB can be used as bactericide, disinfectant, mildew inhibitor, algaecide, etc. it has no stimulation to human skin, and is widely used in health care, medical, textile, wet towel, fishery, papermaking, swimming pool and hydrotherapy, food processing, water treatment, plastic and other fields.
Usage method:
PHMB can be directly diluted or used as an additive in combination with other chemicals. The specific dosage is recommended according to the suggestions of our technicians.
Polyhexamethyleneguanidine is a high molecular polymer sterilizing disinfectant with broad sterilization spectrum; low effective concentration; fast action speed; stable properties; excellent performance of being easily soluble in water; can be used at room temperature; Side effects; non-corrosive; colorless, odorless; non-toxic; non-flammable, non-explosive, safe to use; moderate price; convenient transportation, it can be said to be an ideal fungicide. In fact, this product is a multi-purpose new polymer, which is widely used in sanitation, water treatment, hygiene products, textiles, plastics, swimming pools, aquaculture, agricultural planting and other fields.
Product name Polyhexamethyleneguanidine hydrochloride
Product function Used as disinfectant, antibacterial agent, sterilant, anti-mildew (rot) agent, and algaecide.
Features
Broad-spectrum kill and inhibit a variety of microorganisms;
It has a strong ability to kill bacteria, and has broad-spectrum, high efficiency, and long-term bacteriostatic effect;
Bacteria are less likely to develop drug resistance;
It is actually non-toxic for human and higher animals, and it is non-irritating to skin and mucous membranes;
Basically no corrosion to the treated surface; no etching effect;
Can withstand high temperature of 300
soluble in water;
The aqueous solution is non-toxic, colorless and odorless;
non-flammable, non-explosive;
Does not contain iodine, chlorine, aldehydes and other harmful substances.
Directly diluted with purified water or used in combination with other auxiliaries. The reference dosage is 0.05%~0.5% (w/w). Since the usage and dosage of the product are quite different when the product is applied in different fields, it is recommended to use it under the guidance of the company's technical staff.
[Guarantee date] 24 months under normal temperature and dark storage.
1000kg/metal reinforced cubic drum, 25kg/plastic drum, 20kg/plastic drum, 20kg/carton
1. Product introduction
With the growing demand for antibacterial products in various industries, antibacterial products have become a hot spot of everyone's attention. 981 antibacterial agent is a new type of organic antibacterial agent independently developed by our company. Compared with inorganic antibacterial agents (silver, copper, zinc oxide), it has a lower cost of use, does not dissolve, and is easy to disperse.
2. Product Features
1. High-efficiency antibacterial: It can quickly kill Escherichia coli, Staphylococcus aureus, Candida albicans, etc. up to 99%, and the antibacterial activity value is 2.0, which can reach the 3A antibacterial standard.
2. High-efficiency anti-mildew: It has high-efficiency inhibitory effect on Aspergillus niger, Aspergillus terreus, Trichoderma viride and Penicillium, and can reach grade 0 anti-mildew.
3. Safety and environmental protection: It does not contain heavy metal ions, the product does not dissolve, and has been tested by a third-party authoritative organization, LD50 5000mg/kg, no irritation to the skin.
4. Good compatibility: it can be evenly dispersed in the plastic, the material is smooth, no pores or bubbles will be generated, and the fluidity and thermoplastic properties of the plastic will not be affected.
3. Technical parameters
Brand: 981 Antibacterial Agent
Appearance: white powder
Odor: none
Thermal decomposition temperature:
Fourth, the application industry
Widely used in medical and health care, daily necessities, building materials, chemical materials and other fields, for the development of antibacterial plastics and textile products.
Used in home appliances such as refrigerators, water dispensers, washing machines,
For electronic products: mobile phones, tablet computers, cameras, calculators, keyboards, mice, etc.;
For food antibacterial preservation, such as water pipes, lunch boxes, fresh-keeping bags, food packaging bags, etc.;
For medical devices: hospital facilities, medical devices, disposable gloves.
5. How to use:
The powder is directly added or made into an antibacterial masterbatch. According to the antibacterial requirements of different industries, the recommended addition amount is 0.3%-3%.
Antibacterial Masterbatch is a breakthrough solution of organic antibacterial materials and composite antibacterial materials, which endows products with safe, efficient and lasting antibacterial properties.
Using self-developed production technology, organic antibacterial agents that are safe, environmentally friendly, antibacterial and efficient, and have good high temperature stability are
It is obtained by uniformly dispersing in various plastic slices. In downstream plastic products injection molding, extrusion, film blowing, spinning and other processing processes, adding 2-3.5% can endow plastic products with efficient antibacterial and antifungal properties.
2. Product Features
1. Good compatibility and dispersibility, without changing the original processing technology of plastics
2. Broad-spectrum antibacterial, killing and inhibiting bacteria, fungi and molds.
3. No metal substances, no dissolution, no migration, better safety.
4. Less addition, lower cost of use.
5. Good chemical stability, strong temperature resistance, can withstand 300
Isothiazolinone fungicides, preservatives, anti mold agents, water soluble antiseptic, anti mildew and fungicides of benzisothiazolinone and bronopol series fungicide such as cit/mit, benzisothiazolinone, mit, bronopol, dbnpa, pcmx, spt, sodium pyrithione, zpt, zinc pyrithione, ipbc, phmb, zinc oxide
more info, welcome to visit www.sinotrustchemical.com.Shipment, custom clearing
Product name: Desulfurizer agent
Chemical name: MEA Triazine; (Hexahydro-1,3,5-tris(hydroxyethyl)-s-triazine)
CAS No.: 4719-04-4
EINECS No.: 203-612-8
Purity: 40%
Description:
Triazine desulfurizer is configured from our unique technology, which is formula products. The main components consist of triazine derivatives such as organic amines and their derivatives, organic solvents, cocatalysts, corrosion inhibitors, and activators. The molecular formula of organic amine is CnHn-2NO2, which has a large molecular weight, a boiling point of 130 C, and a freezing point below -24C.
Desulfurizer is a water-soluble derivative, colorless or light yellow transparent viscous liquid, no odor, pH=9~10. The compound is a macromolecular active agent. The molecular chain is rich in nitrogen atoms and contains active H atoms. It can react with S+ in H2S to form an irreversible chemical compound, thereby achieving the purpose of removing H2S from natural gas. Its desulfurization products are water-soluble liquids, high safety, and do not require recycling, can be directly injected into the formation.
Standard
Character: Brown homogeneous liquid
Ph value: 9.5-10.5
Density: 1.02-1.05
Solution: Easily soluble in water or low molecular alcohol
Effective content: 35%
Viscosity: 10-20mPas
The ratio of desulphurizing: 0.99
Freezing point: < -24
Application:
Widely used in the production process / waste treatment process, eliminating sulfides such as hydrogen sulfide and mercaptans. Wastewater desulfurizer, natural gas crude oil desulfurizer, etc.;
BIT-85 (1.2-Benzisothiazolin-3-one)
In-Can Preservation for Paints, Adhesives and Related Products
Item No.: BIT-85 high grade Bactericide/ preservatives
Chemical Name:1,2-benzisothiazoline-3-one / Benzothiazole kathon
Cas No.:2634-33-5
EINECS No.: 220-120-9
Molecular Formula: C7H4NOS
Molecular weight:151.18
General:
BIT 85 biocide is a broad spectrum microbicide for the preservation of industrial water-based products against the attack of microorganisms. BIT 85% Powder containing 99% W/W 1,2-Benzisothiazolin-3-one.
Benzisothiazolinone 85% is specifically recommended for the preservation of polymer emulsions, paints and coatings, adhesives, and printing inks.
Technical index:
Appearance: White powder
Content of active substance: 99% min
Flash Point: 77.5
Density(25) g/cm3: 1.367
Dryness: 85%
Water content:15% max
Usage:
Industrial sterilization, anti-corrosion, anti-enzymes. It has outstanding effects of inhibiting the growth of molds (fungi, bacteria) and algae in organic media, and solves a series of problems such as mold, fermentation, deterioration, demulsification and odor caused by microbial growth. Therefore, developed countries use BIT widely in latex products, water-soluble resins, coatings (latex paints), acrylics, and polymers. Polyurethane products, photo washing liquid, paper, ink, leather, lubricating oil and other products.
Application Field
Widely used in polymer emulsion, Waterborne coatings, adhesive, Coated paper, Emulsified oil preparation, Oil extraction, industry water treatment system etc.
Product Benefits
1. Broad spectrum activity in high pH systems, controlling bacteria, fungi and yeasts.
2. Stable in the presence of amines.
3. Non specific mode of action, resulting in reduced microbial resistance potential.
4. Ease of handling due to its liquid form and good compatibility in most aqueous compositions.
5. Excellent performance with co-biocides like CMI/MI, bronopol or formaldehyde releasers, which allow performance enhancements and cost reduction.
6. The active ingredient is non-volatile and has a comparatively high heat stability which allows the incorporation in fluids which are still hot.
7. High purity active ingredient, made evident by its clear light colour.
Safety/Operation
Avoid any contact with the skin. Wear protective clothes, goggles, and rubber gloves in operation. Once touch, will be sensitive to skin. Irritating to the skin and eyes.
Product name: Triclosan
Chemical Name: 2,4,4'-trichloro-2'-hydroxy diphenyl ether; 5-Chloro-2-(2,4-dichlorophenoxy) phenol;
CAS No.: 3380-34-5
EINECS No.:222-182-2
Triclosan is a kind of which can kill or inhibit gram-positive and gram-negative bacterium, yeast and virus etc.
Physical natures
a. Properties: white crystalline powder, aromatic slightly phenolic odour.
b. Solubility: could be slightly dissolved in water , medium solubility in dilute alkali solution, easily dissolved in organic solvents such as ethanol and acetone etc.
c. It can be made transparent highly condensed liquid products after dissoving in surfactants.
Characteristic:
A broad spectrum, efficient, security and non-toxicity antibacterial.
Large potency to gram-positive bacterium, gram-negative bacterium, mould and saccharomycetes.
Solubility: freely soluble in organic solvent and surfactant;
Solubility: stable in rather higher degree, acid or alkali solution;
Keep highly stable in strong acid, or strong alkali;
Friendly to human body and environment;
PH range of application: 4-10;
Specification:
Appearance:White Crystalline Powder
Identification A: IR spectrum consistent with that obtained with Triclosan RS;
Identification B.: The retention time of the major peak in the chromatogram of the assay preparation corresponds to that in the chromatogram of the standard preparation, as obtained in the assay
Assay (%): 97.0-103.0%
Residue on ignition: 0.1% max
Water (%): 0.1% max
Heavy metals: 0.002% max
Melting Point (0C): 56-58�°C
Applications:
Buccal disinfectant products. (Oral rinse, toothpaste)
Personal care products. (facial cleanser, hair and body shampoo, deodorant products)
Antibacterial soap and dish washing detergent;
Hospital Hygiene disinfectant, antibacterial textile finishing agent;
Dosage:
0.1%-0.5% according to the formulation.
Remark: In the new GB, Triclosan is allowed to add in toothpaste. The limitation of dosage is under 0.3%;
Safety:
Triclosan can co-exist well with human skins. Long-term and wide animal toxicological experiments also prove that using Triclosan in the advised application scope and amount limits can reach international toxicity standard for chemical products .It is a preferable safe and high performance broad spectrum antiseptic agent in the world of today.
Polyhmethylene guanidine hydrochloride (international common name: PHMG) is a safe, efficient, broad-spectrum polymer antibacterial agent, widely used in sanitary disinfection, water treatment, sanitary products, textiles, plastics, aquaculture, agricultural planting and other fields.
Antibacterial principle:
Guanidine group has high activity, can make the polymer become positively charged, it is easy to be adsorbed by all kinds of bacteria and viruses that are negatively charged, thereby inhibiting the division function of bacteria and viruses, causing them to lose their reproductive ability. The formed film blocked the breathing channels of microorganisms, causing the microorganisms to suffocate and die quickly. Another active ingredient, hydrochloric acid, enhances the bactericidal ability.
Application:
1.PHMG can be used for decontamination and resistance of microbe, including bacteria, virus, fungi, mildew and algae; in the field of medical use, hygiene, textile, wet-tissue. fishery, planting, food-processing, water treatment etc.
2.In the agricultural sector, it has a good prevention, treatment on botrytis, sclerotinia, bacterial keratosis, root rot, blight, grape anthracnose, felt disease, beetle and increase the harvest effect.
3. It can play a good role in flocculation and sterilization in the sewage treatment process.
Package:
25kg/drum, 50kg/drum, 100kg/drum. Sealed and stored at room temperature and protected from light. The storage period is two years.
General
Sodium pyrithione is currently the most effective water-soluble industrial mildew preservative, with high efficiency, broad spectrum, low toxicity and stability. It can be used in metal cutting fluid, anti-rust liquid, latex paint, adhesive, leather products, textile. Products, copper paper, etc. Antibacterial agent has the characteristics of high efficiency, broad spectrum, low toxicity and stable aqueous solution. The main application areas include: daily chemical products, adhesives, paper, medicine, pesticides, leather products, disinfection products.
Specification:
Appearance: White powder
Assay: 98% min
PH Value: 8.5-10.5
Solubility: Easily soluble in organic solvents such as water and ethanol.
Application:
1) Sodium Pyrithione is widely used in daily chemicals (Shampoo and hair conditioner products) building coating, sealing, sticking, pesticide, textile, leather, metalworking fluid and so on, it is effective antimicrobial to bacterial.
2) Sodium Pyrithione is also used to formulate disinfectant and medical spectrum antifungal skin.
3) Sodium Pyrithione is also used as a biocide and disinfectant for fruit trees, wheat, vegetables, and silkworm.
4) Sodium Pyrithione and the other similar product are widely used in the filed, with high effect, wide spectrum and low toxic advantage.
Composition:
Chemical characterization: Mixtures
CAS NO.Mixtures ComponentWeight
2634-33-51,2-Benzisothiazolin-3-one2.0-3.0%
2682-20-42-methyl-4-isothiazolin-3-one2.0-3.0%
7732-18-5WaterBalance
Physical & chemical properties:
AppearanceClear,yellow solution
PH value8.0-9.5
Relative density1.02 -1.04 g/mL
Water solubilitysoluble
Viscosity5.1 mPaï??s (at 20°C)
Specification:
ItemsSpecificationTest Results
AppearanceClear,yellow solutionConform
MIT (%)2.0-3.02.56
BIT (%)2.0-3.02.47
Densityat 20g/ml 1.02-1.041.036
PH Value8.0-9.58.73
Package: 25kg drum, 200kg drum
Storage condition: At room temperature, In dark place, In tightly closed container.
6) Specification
Purity: 99.0%
AppearanceWhite crystalline powder
Water: 0.5%
Melting Point:114~116
Residue on ignition: 0.1%
Perchlorethylene: 0.1% max
Iron: 80ppm
Copper: 20ppm max
2-Chloro-3,5-dimethylphenol(OCMX): 0.3%
2,4-Dichloro-3,5-dimethylphenol(DCMX): 0.5%
chlorocresol ,4-chloro-3-methylphenol(PCMX):0.1% max
7) Properties
White crystalline powder, slight aromatic odor. Melting point is 114~116, Boiling point is 246. Slightly soluble in water, soluble in dilute alkali solutions, freely soluble in many organic reagents.
8) Applicability
PCMX is a highly effective broad-spectrum antimicrobial and preservative, used to inhibit bacteria, fungi and mold growth. Display a combination of sterilization and preservation of unique, so efficient and no toxic in many sterilization application. The extensive application of sterilization in family, medicine, industrial supplies. PCMX can add to some medicinal powder, soap, hygiene and anti dandruff shampoo. As a preservative and fungicide, Also can be apply in paint, textile, paper making industry, cosmetics and polishing agent.
BIT-20 biocide benzisothiazolinone
In-Can Preservation for Paints, Adhesives and Related Products
General
BIT-20 biocide is a broad spectrum microbicide for the preservation of industrial water-based products against the attack of microorganisms. The Composition of BIT-20 is 20% solution of 1,2-Benzisothiazolin-3-one in dipropylene glycol and water.
BIT-20 is specifically recommended for the preservation of polymer emulsions, paints and coatings, adhesives, and printing inks.
Specification:
No. ItemDescription
1Appearance Amber liquid
2Content of Active Substance (%)20
3PH Value 9-13
4Density (g/ml)1.10-1.20
Application field
Suitable for applications in the water-based polymer, leather, paint, textile, printing and dyeing, metal cutting fluids, adhesives, inks, dyes, dye dispersions industries to resist corrosion.
Performance characteristics
1. Serve as a broad-spectrum, long-lasting biocide to kill many bacteria, fungi and yeasts; the liquid with a lowest concentration of 0.1% will have a good antibacterial effect;
2. Good compatibility with all kinds of emulsifiers, surfactants and other agents; miscible in the solutions of alcohol and water at any ratio.
3. Wider applications that like products; suitable for use in the medium of the pH value in the range of 4.0-12.
4. Excellent inactivity, with the active ingredient able to withstand a high temperature of 150 .
5. Low toxicity; contain no heavy metals and halogen compounds; inactive to amines; free of formaldehyde.
Usage and Cautions
1. For use in cosmetics, body care products, and other daily chemicals, the concentration of using is in the range of 0.05-0.40% (w/w) depending on the storage environment and whether the product is susceptible to the destroy of microorganisms. The specific formula and instructions for the concentration of using will be based on the company's microbial technology division
2. It can be added at any production step; but it's suggested to be added at the final step at less than 50 ; avoid adding at a temperature of higher than 50 .
3. Wear protective clothing, rubber gloves and goggles and masks, avoid contact with skin, eyes and mucous membranes.
Safety: In an acute oral toxicity test, the LD50 in rats is 2500 mg/kg.
Packaging: 25kg, 200 kg per plastic drum.
Storage and Transportation
With a shelf time of one year when stored at room temperature in a dark, air-tight, and moisture-proof place.
Product name: Bronopol
Chemical name: 2-Bromo-2-nitro-1,3-propanediol
CAS NO.: 52-51-7
EINECS No.: 200-143-0
MF: C3H6BrNO4
Molecular weight: 200
Melting Point: 123-130°C
Moisture: 0.5% max
Package: 25kg cardboard drum;
Storage and transportation: Sealed, moisture-proof, dark-proof, shelf life of 4 years.
Usage:
Biocide, mainly used in industrial circulating water, paper pulp, paint, plastics, cosmetics, wood, cooling water circulation system, as well as sterilization, mildew, anti-corrosion and algae killing for industrial purposes.
Advantage:
(1) Highly efficient, with broad-spectrum antibacterial activity, can inhibit the growth of most bacteria at25ppm concentration, and better for Gram-negative bacteria and various Pseudomonas species;
(2) Low dosage and low price. In cosmetics, the dosage is generally 0.01~0.05%, which is one tenth of the common preservatives of parabens, and the cost of use is more than half of that of parabens;
(3) Good compatibility. Nutrients such as protein and various cationic, anionic, nonionic surfactants will not affect its antibacterial effect;
(4) A suitable pH range. It is effective in the range of pH 4ï½?9, that is, in the environment of weak acidity, neutrality and partial alkali, it can maintain strong antibacterial effect after adding;
(5) Good water solubility and easy to use. It is easily soluble in water and has a solubility of 25g in water at 25 ° C. It is extremely convenient to use.
Range of use and amount of addition:
This product can be used in creams, lotions, shampoos and other products. The general addition amount is 0.2-0.5â?°, and the maximum allowable addition amount in the daily chemical product is 1â?°, and there is no residue in the discharge, which will not cause cumulative pollution to the environment. Application pH range: 4-8; application temperature range: generally pre-dissolved in an appropriate amount of water, added below 60 °C.
Precautions:
This product can be applied in a wide range of pH, with the best range from acidic to neutral. It is unstable under high temperature and alkaline conditions, and the color becomes dark under the sun light. It is compatible with most surfactants, but when a substance containing a -SH group in a cosmetic raw material, such as cysteine, etc., its antibacterial activity is lowered. In addition, aluminum metal can also reduce the antibacterial activity of this product.
31 Polihexanide (Phmb) Suppliers
Short on time? Let Polihexanide (Phmb) sellers contact you.
