PHMB 20 solution (Polyhexamethylene Biguanide HCL)
Product name: PHMB 20; Poly(hexamethylenebiguanide) hydrochloride;
Polyhexamethylene Biguanide HCL;
CAS No.: 32289-58-0
EINECS No.: 1308068-626-2
Molecular formula: (C8H17N5)n.xHCl
PHMB 20% solution is recognized as the safest and the most efficient broad-spectrum antibacterial agent in the 21st century. It is colorless and tasteless, low bacterial inhibition concentration, broad spectrum, low toxicity.It can form a layer of cations on the surface of article, which can inhibit bacteria for a long time. It also has no bacteria drug resistance.
Technical Index:
Appearance: Colorless or Light yellow transparent liquid
Content of Active Substance (%): â?¥20.0
PH value: 4.5-6.5
Density (@20 g/cm3): 1.1+/-0.1
Viscosity (CP): 5
Boiling Point (): 102
Flash Point: Does not glow when boiling
Dispersibility in water: Compatible with water in any ratio
Usage:
PHMB 20 has the ability to kill bacteria, fungi, algae and yeast. It acts on the cell wall or cell membrane of bacteria, fungi, algae, Combine with phospholipid compounds, Rapid breakdown of their membrane system, making the Intracellular Substance outflow, And inhibit certain enzyme activities that attached in the cells, thereby achieving antibacterial and antifungal effects. This product is low in toxicity and long-term use, Compared with polyhexamethylene monoterpene, This product has better antibacterial effect on fungi and yeast. The antibacterial effect of this product is characterized by high efficiency, safety, stability, long-term effect, convenient use and environment friendly
Application:
1) Water Treatment:
a. Swimming pool disinfection, as an alternative to chlorine;
b. For industrial water(cooling tower, â?¦)
c. Surface disinfecting: -hospitals; -algaecide for concrete surfaces; -all purpose surfaces disinfectant
2) Cosmetics
Lotion:This product is used as the main bactericidal ingredient in the compound hand sanitizer. When the content of the product is 250-300 mg / l, it has a good killing effect on cell propagules and yeasts.
3) Daily care products
This product can be used for antibacterial preservation of disposable wet wipes, wet towels, napkins and antibacterial hand sanitizers; it is used for lens disinfectant.
4) Aquaculture
Adding this product to the aquatic water system can inhibit bacteria in the water system and prevent aquatic diseases such as red legs, bad eyes and rotten plaque caused by bacteria.
5) Textile
This product can be used for antibacterial finishing of textiles. Due to its good heat stability, it can be added to the melt spinning solution to make antibacterial synthetic fibers. It can also be used in antibacterial laundry liquid.
Packaging: 25kg/drum; 200kg/drum;
1. Product name: Ammonium bisulfite solution 2. Molecular formula: NH4HSO3 3. Molecular weight: 99.10 4. Physical and chemical properties: light yellow liquid, with a little sulfur dioxide odor. Relative density (70%) : 1.4. 5. Technical index: Item Photographic grade Appearance clear light yellow liquid Content w/w % 68-72 pH value (stock solution 20C) 4.0-6.0 Iron (Fe) w/w % 0.001 6. Packing: 270kg plastic drum, 1.25MTS/IBC 7. Uses: in synthesizing dye intermediate, surfactant, herbicide, reducing agent in pharmaceutical industry, etc.
Calcium thiosulfate solution CAS NO .: 10124-41-1 Molecular formula: Ca2S2O3 Molecular weight: 152.208 Physical and chemical properties: colorless transparent liquid, non-dangerous goods Use: used in medicine, agriculture and other fields Packing:1240kg IBC drum Product specifications: Appearance Clear transparent liquid Content Ca2S2O3 % 24% S 12.4 Lead ppm 1 Mercury ppm 1 Iron ppm 0.01 pHï¼ 20 6.5-9.0
Inspection item Appearance White Granular Available chlorine Wt. % 60%MIN PH value (1% water solution) 5.5-7.0 Moisture (%) 5%MAX Granularity (mesh) 20-60mesh
Trichloroisocyanuric acid (TCCA) 90% Min intro: 1. Molecular formula: C3N3O3C13 Molecular Weight: 232.44 CAS: 87-90-1 HS NO:29336922 UN NO:2468 2. Structural formula: 3. Uses: 1) water treatment: it can be used to disinfect drink water and water in swimming pool, algae-removing in circulating water. 2) Disinfection: It can be used in disinfecting dinner, food, and dishes, or used in the prophylactic disinfection of home, hotel and public place; hygiene and disease control of hospital; or used in the disinfection of silk worm, animals, birds and fish 3) Other: It can be used in anti-shrinkage finishing of wool, textile bleaching, antimoth of paper and chlorinated agent of rubber. 4. Technical Index: Appearance: white powder/granular Available chlorine: 90%Min PH (1% Aq. Solution): 2.7-3.3 Moisture: 0.5% Max Granular Size: 8-30mesh or 20-60mesh Package: 25kg/50kg plastic drum, 50kg fiber drum. 5. Product: According to the requirements of production from customers.
Product Name: Ferrous Sulphate Heptahydrate Molecular Formula: FeSO4. 7H2O CAS No.: 7782-63-0 Mol Weight: 278.05 Usage and Dosage: 1. Industrially: ferrous sulphate heptahydrate is mainly used as a precursor to other iron compounds. It is a reducing agent, for the reduction of chromate in cement. 2. Nutritional Supplement: Together with other iron compounds, ferrous sulphate is used to fortify foods and treat iron-deficiency anemia. Constipation is a frequent and uncomfortable side effect associated with the administration of oral supplements. Stool softeners often are prescribed to prevent constipation. 3. Colorant: Ferrous sulphate can also be used to stain concete and some limestones and sandstones a yellowish rust color. 4. Water Treatment: Ferrous sulphate has been applied for the purification of water by flocculation and for phosphate removal in municipal and industrial sewage treatment plants to prevent eutrophication of surface water bodies. Storage: Storage Store in cool, dry, well ventilated area, removed from oxidising agents (eg. hypochlorites), acids, metals and foodstuffs. Ensure containers are adequately labelled, protected from physical damage and sealed when not in use. Large storage areas should have appropriate ventilation systems. Precaution: Flammability Non flammable. No fire or explosion hazard exists. Packing: Net weight 25kgs, 50kgs per each plastic woven bag Technical Specification Appearance: Light green crystalline powder Fe 19.7%min Pb 20 ppm max As2 ppm max Cd 5 ppm max Size Crystalline Powder
English name: Calcium Nitrite Molecular formula: Ca(NO2)2 Molecular weight: 132 CAS NO. 13780-06-8 HS CODE: 28341000 UN NO.: 2627 5.1 type oxidizing agent Properties: White powder without crystal water. It is tasteless and toxic. Easily in water and presents light yellow solution. Specifications: Item Superior grade First grade Second grade Calcium Nitrite[Ca(NO2)2 as dry basis]% 94 92 90 Calcium Nitrate[Ca(NO3)2 as dry basis]%
Commodity:Sodium Aluminate Other names:Aluminium sodium dioxide; SodiumaluminatecaHO; dialuminum; oxygen(-2) anion; sodiooxysodium Molecular formula: NaAlO2 CAS No.: 1302-42-7 Property: colorless, odorless, tasteless, strongly alkaline. Solid type: white powder or granules, hygroscopic, readily soluble in water. The aqueous solution may absorb CO2 and form aluminum hydroxide precipitate. Addition of NaOH is required to increase stability. Liquid type: transparent slurry, stable during storage life. Prolonged stay of diluted aqueous solution may cause aluminum hydroxide precipitate. Use: In the construction process, it can be used as leaking stoppage agent combined with the sodium silicate. In paper-making, this product can mix with aluminum sulfate to be a good filling agent. In water treatment, it can be used as additive of purifier. Technical specifications: ModelNa2Al2O4Al2O3Na2O/Al2O3Insoluble % Density, g/c m3Shelf life, month LiquidA-129181.700.51.48±0.0112 A-238241.300.51.50±0.0112 SolidSNA162391.25±0.050.5 24 SNA265411.25±0.050.5 24 SNA377481.25±0.050.5 24 SNA480501.25±0.050.5 24 Packing: Solid powder in 25kg PP bag Liquid in 300kg drums or 1500kg IBC tank
Product Name:Aluminium sulphate Molecular Formula:AL2(SO4)3 Hs Code: 2833220000 CAS Code:10043-01-3 Standard:HG2225-2010 Shape:flake, powder, 2-4cm lump and 2-5mm/3-8mm granular Properties:There are two types,anhydrous aluminium sulphate and aluminium sulphate octadecahydrate. In normal condition , it is AL2(SO4)3 18H2O; AL2(SO4)3 14H2O after efflorescence, can be white powder , glittering flaky or crystalline flakes, odorless, sweet to slight bitter. Use:Sewage Treatment, treatment of drinking water, Sizing of paper , Cement Additive. Specifications Item Name Standard AL2O3 15.6% 16.5% 17% Fe2O3 ¤0.5 % 0.005 % 0.004% PH value .0 3.0 3.0 Water insoluble matter 0.2% 0.04% 0.03% Packing 25kg or 50kg or 1000kg in plastic lined woven bag
Formula:KAl(SO4)2 12H2O Relative Molecular Weight:474.39 CAS NO,: 7784-24-9 EINECS No.:5637-689-7 HS CODE.: 2833301000 Appearance: lump, white crystal, white powder Properties:Colorless, transparent, particle or crystalline powder, odorless, nontoxic, tastes slightly sweet and puckery, astringent, easily soluble in water, its water solution appears acid,is would lose crystal water and become white powder on heating Usage; Food industry: Buffering agents and leavening agents in food-grade products. Chemical Industry: Water Flocculant, aluminum tanning agents and after-treating agents for leather tanning in the leather industry, dyeing agents,Astringents,mordants etc. Items Specifications Potassium aluminum sulfate [AlK(SO4)2.12H2O] % 99.5 Plumbum(Pb) mg/kg 5.0 Arsenic (As) mg/kg 2.0 Fluorine (F) mg/kg 30.0 Selenium (Se) mg/kg 30.0 Moisture % 4.0
