we have POE packed in 25kg bags or jumbo bags. MFI 1-4, density 0.88-0.91
POE is the use of a metallocene catalyst, ethylene and octene-situ polymerization of a thermoplastic elastomer, POE plastic of PP has excellent toughening effect, and PP, calcium carbonate has a good compatibility, but the content of the plastic POE should be controlled at 20% or less.
1024 mac address Standard Norms Network protocolsiee 802.3i 100base-t, iee 802.3u 100base-t Iee 802.3x flow control, iee 802.3af power over ethernet, Power Support Led indecatorpower, each port speed, connectivity. Poe active, poe fault Max power support poe90w¡ê¡§port 1-port 4¡ê©maximum 15.4w per port Max power 96w, 48v/2a dc output Power1, 2(+);3, 6(-) (endspan) Data1, 2-tx; 3, 6-rx Power supply modedetect pd, then power support Otherselectromagnetic compatibility ce class b/fcc part15, class b/vcci class b/c-tick Safety normsce/lvd Operating temperature0¡ã¡a40¡æ Operating humidity10%-90%, non-condensing Physical Specifications Dimension(mm) 225mm*121mm*35mm Weight¡ê¡§kg¡ê© 1kg(including package) Dimension(mm) 225mm*121mm*35mm Weight¡ê¡§kg¡ê© 1kg(including package)
Single-port Ethernet power supply equipment, which is suitable for indoor use, can work normally from 100VAC to 240VAC input voltage. The power supply and network terminal equipment are connected by over five types of cables. It has an Ethernet data port and an output port after data and power combination. This device can provide POE power supply applications in line with IEEE802.3af/at international standards for all Ethernet devices, such as routers, switches, wireless AP, network telephones, industrial network terminals, network cameras, etc. It can also provide efficient engineering in places where power supply cannot be provided remotely or where power supply by Ethernet network lines can be used to improve system reliability and simplify equipment installation.
Hi sir, we can offer POE from Mitsui and SK off grade, and other elastomer like SEBS, SBS, SIS,..etc, if you are interested, please contact me, I'll send you more details. Best Regards, Aries aries.actcATgmailDOTcom
Model POE-S2004FB Ports 4 10/100Mbps POE + 2 10/100Mbps Uplink Power Input AC 100-240V, 50/60Hz, 1.0A Max. Power Output DC 48-57V, 80W (Rated), Full Load Max. 65W (Net Output) Max. 60W for 1st PoE port Max. 30W for 2nd~4th PoE port Data Exchange 10/100Mbps (Gigabit is optional and available), Store and Forward Bandwidth/MAC 1.6Gbps, 1K Package Forwarding/Buffer 1.15Mpps, 768K Power/Data Assignment Power: pin 1,2 + pin 3,6 - ; Data: pin 1,2,3,6 Ambient Environment Operating temperature: -10~55 Storing temperature: - 40~75 Operating Humidity: 5%~90% RH, No condensing Storing Humidity: 5%~95% RH, No condensing Network Protocolï¼? IEEE 802.3 Ethernet media access control protocol IEEE 802.3i 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3af/at/PoE++ Power over Ethernet cable pairs or device IEEE 802.3x Flow control IEEE802.1q VLAN Network bridge operation Data Speed Ethernet 10Mbps half-duplex, 20Mbps full-duplex Fast Ethernet 100Mbpshalf-duplex, 200Mbps full-duplex Network Medium 10Base-T: Pair 2 Category 3,4,5(Cat3,4,5) UTP/STP(â?¤250m) 100Base-TX: Pair 2 Category 5(Cat5) or better UTP/STP(â? 150m) System Mode Standard Free communication VLAN Port Isolation 250m Supper long-distance transmission Lightning Protection 3KV 8/20us Certificate CE, FCC, RoHS Warranty 1~2 years Size/Weight PoE Switch Size: 190mm*130mm*33mm (L*W*H) Packing Box Size: 310mm*210mm*60mm (L*W*H) Net Weight: 0.9kg, Gross Weight:1.1kg
POE plastic is a thermoplastic elastomer in situ polymerization of ethylene and octene using metallocene catalyst. Its characteristics are as follows : (1) the soft crimped chain structure of octene and the crystalline ethylene chain as physical cross-linking point, which makes it both excellent toughness and good processability. (2) There is no unsaturated double bond in the molecular structure of POE plastic, which has excellent aging resistance. (3)POE plastic has narrow molecular weight distribution and good compatibility with polyolefin. (4) Good fluidity can improve the dispersion effect of filler, but also improve the strength of fusion mark products.
aluminum foil for milk powder can lid alloy 8011 temper soft thickness 90-100mic one side heat seal lacquer and other side protective lacquer usage milk powder can lid , peel off lid ect more info , please contact me freely
PT-PSE105GBS-E is an indoor rated fiber PoE Media converter specially designed for complex industrial backhaul and networking applications, special scenarios, like highway side, exurb, etc. Enclosed in an IP40 high-impact metal case with DIN Rail mount bracket, but can work outdoor by covered with waterproof case. PoE Injector for information kiosks After negotiating IEEE802.3bt standard PoE, the single PoE output port delivers 55Vdc, 1.63A up to 90W power with 6KV surge protection for remote PDs over 4 Pair at 10/100/1000Mbps data rates. High quality PoE Injector works with a wide input voltage of 12-48Vdc make it possible for solar application and operates under -40 to +65. It fully complies with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices, such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks. PoE Injector for POS For planning purposes, the effective distance is 100 meters over Cat5e/Cat6 cables. We are PoE supplier PoE Injector for information kiosks Specifications Parameter Description Key Features Industrial Fiber PoE can be outdoor use by covered with waterproof case Surge protection at PoE port 1000Base-FX to 10/100/1000Base-TX SFP slot for Multi mode or Single mode SFP transceiver Gigabit data rates 12-48VDC input make it possible for solar application DIN Rail mount IP40 high-impact metal enclosure Extend temperature from -40 to 65 Diagnostic LEDs Part Number PT-PSE105GBS-E Ports condition SFP Port*1, PoE Output Port*1, DC input Terminal Block *1 Regulatory Compliance IEEE802.3bt RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5(+), 7/8(-) & 3/6(+),1/2(-) Output Power Voltage: 55Vdc User Port Power: 90W Guaranteen Input DC Input Voltage: 12 to 48 Vdc DC Input Current: 8.0A
PoE Injector for door locks PT-PSE105GBS-D is a single port fiber PoE Media converter with 4 Pair PoE up to 90 watts of power with 6Kv surge protection PoE Injector for displays Designed for the PoE++ powered 90W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. PoE Injector for information kiosks Enclosed in an IP40 high-impact metal case with DIN Rail mount bracket, designed for indoor use but can work outdoor by covered with waterproof case. It works with a wide input voltage of 50-57Vdc, the output voltage follows input and operates under -40 to +65, For planning purposes, the effective distance is 100 meters over Cat5e/Cat6 cables. It is suitable for special scenarios, like highway side, exurb, etc. PoE Injector for IoT application Specifications Parameter high quality PoE Injector Description Key Features Industrial Fiber PoE can be outdoor use by covered with waterproof case Surge protection at PoE port 1000Base-FX to 10/100/1000Base-TX SFP slot for Multi mode or Single mode SFP transceiver Gigabit data rates DIN Rail mount IP40 high-impact metal enclosure Extend temperature from -40 to 65 Diagnostic LEDs Part Number PT-PSE105GBS-D Ports condition SFP Port*1, PoE Output Port*1, DC input Terminal Block *1 Regulatory Compliance IEEE802.3bt RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5(+), 7/8(-) & 3/6(+),1/2(-) Output Power Voltage: 50-57Vdc User Port Power: 90W Guaranteen Input DC Input Voltage: 50-57Vdc Working Environment Operating Temperature: -40 to 65 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -40 to 85 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 6KV Differential mode surge protection (10/700us): 1.5KV AC Surge Protection Line-Earth 1.2/50us (8/20us):2KV Line-Line 1.2/50us (8/20us): 1KV Mechanical Characteristics Case: Metal Color: Black Mounting: DIN-rail IP Rated: IP40 Connectors: Shielded RJ-45*1, SFP slot*1 Size:144.5 X 96 X 35.4mm Weight: 485gï¼?1.1lbï¼? LED Indicator Power Indicator: Green PoE Load Indicator: Green SFP fiber indicator: Green PoE data indicator: Yellow Warranty 2 year
PT-POS401GR-OT is a 4-ports ourdoor use PoE switch with 2 Pair PoE,each port up to 30 watts of power at 55 VDC at 0.55 amp.Switch industrial poe has sealing gasket inside which passed extension, bearing, corrosion, aging test. 4 ports includ 1 LAN port and 3 PoE output ports with 6KV (10/700us) surge protection. outdoor poe switch suppots 10/100/1000-Mbps of data speed. It is compliant with IEEE802.3af/at standard equipments, such as wireless APs, network camera, VoIP phone, base stations, and other high power Ethernet terminals.It has detection chip inside, which will detect and classify PD before powering it. outdoor poe switch will not provide power until a standard-compliant PD is detected. poe switch supplier: Creative Lianjie Network Technology Co., Ltd Enclosed in an IP67 waterproof metal casing, designed for outdoor installation with installation kit PT-POT-MBK, no need to open the equipment. It operates with input voltage of 100-240Vdc, 50 or 60 Hz. The effective distance limitation of 100 meters over Cat5e/Cat6 cables can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender). PoE Switch for network camera Specifications Parameter Description Key Features 1 LAN+3 PoE ports PoE Switch Wide temperature solutions Lighting Protection Part Number PT-POS401GR-OT Ports condition LAN Port*1, AC Input Port*1, PoE Output Port*3,Earth Port*1 Regulatory Compliance IEEE802.3 af/at RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 3/6 (+), 1/2 () Output Power Voltage: 55Vdc Output Current: 550mA (Per Port) User Port Power: 30W Guaranteen(Per Port) Input AC Input Voltage: 100 to 240 Vac AC Input Current: 2A Frequency: 47 to 63Hz (50/60Hz Typ.) Working Environment Operating Temperature: -40 to 65 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -40 to 85 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 6KV Differential mode surge protection (10/700us): 1.5KV AC Surge Protection Line-Earth 1.2/50us (8/20us): 6KV Line-Line 1.2/50us (8/20us): 4KV
PT-POS401GRF-OT is a 4-ports ourdoor use PoE switch with 2 Pair PoE, each port up to 30 watts of power at 55 VDC at 0.55 amp. It has sealing gasket inside which passed extension, bearing, corrosion, aging test. 4 ports includ 1 SFP port and 3 PoE output ports with 6KV (10/700us) surge protection. PoE Switch for VoIP phone It suppots 10/100/1000-Mbps of data speed. It is compliant with IEEE802.3af/at standard equipments, such as wireless APs, network camera, VoIP phone, base stations, and other high power Ethernet terminals.It has detection chip inside, which will detect and classify PD before powering it. It will not provide power until a standard-compliant PD is detected. PoE Switch for base stations Enclosed in an IP67 waterproof metal casing, designed for outdoor installation with installation kit PT-POT-MBK, no need to open the equipment. It operates with input voltage of 100-240Vdc, 50 or 60 Hz. The effective distance limitation of 100 meters over Cat5e/Cat6 cables can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender). switch industrial poe Specifications Parameter Description PoE Switch for network camera Key Features 1 SFP +3 PoE ports PoE Switch Wide temperature solutions Lighting Protection Part Number PT-POS401GRF-OT Ports condition SFP Port*1, AC Input Port*1, PoE Output Port*3,Earth Port*1 Regulatory Compliance IEEE802.3 af/at RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 3/6 (+), 1/2 () Output Power Voltage: 55Vdc Output Current: 550mA (Per Port) User Port Power: 30W Guaranteen(Per Port) Input AC Input Voltage: 100 to 240 Vac AC Input Current: 2A Frequency: 47 to 63Hz (50/60Hz Typ.) Working Environment Operating Temperature: -40 to 65 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -40 to 85 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 6KV Differential mode surge protection (10/700us): 1.5KV AC Surge Protection Line-Earth 1.2/50us (8/20us): 6KV Line-Line 1.2/50us (8/20us): 4KV Mechanical Characteristics Case: Metal Color: White Mounting: Wall- mounted/ Pole-mounted IP Rated: IP67 Connectors: Shielded RJ-45*3,SFP*1 Size: 176mmX 269mmX 65mm Weight: 1.8kgï¼?3.97lbï¼? Warranty 2 year
outdoor poe switch PT-POS401GR-OT-D is a 3 port outdoor Switch with 2 Pair PoE up to 30 watts of power at 55 VDC at 0.55 amp. PoE Switch for wireless APs Designed for the PoE+ powered 30W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3at and remains compatible with any IEEE802.3af compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. We can custom PoE Switch Enclosed in an IP67 fire retardant metal case, designed for indoor installation with Wall-mounted. outdoor poe switch operates with a wide input voltage of 44-57 VDC. The effective distance limitation of 100 meters over Cat5e/Cat6 cables can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender). outdoor poe switch Specifications Parameter Description Key Features Wall-mounted/Pole-mounted Part Number PT-POS401GR-OT-D Ports condition LAN Port*1, DC Input Port*1, PoE Output Port*3 Regulatory Compliance IEEE802.3at RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 3/6 (+), 1/2 () Output Power Voltage: 55Vdc User Port Power: 30W (per port) Guaranteen Input DC Input Voltage: 44 to 57 Vdc Working Environment Operating Temperature: -40 to 65 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -40 to 85 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 6KV Differential mode surge protection (10/700us): 1.5KV Line-Earth 1.2/50us (8/20us): 6KV Line-Line 1.2/50us (8/20us): 4KV AC Surge Protection Line-Earth 1.2/50us (8/20us): 2KV Line-Line 1.2/50us (8/20us): 1KV Mechanical Characteristics Case: Metal Color: White Mounting: Wall-mounted/Pole-mounted IP Rated: IP67 Connectors: Shielded RJ-45*4 Size: 176mmX 269mmX 65mm Weight: 1800gï¼?3lb 15ozï¼? LED Indicator Power Indicator: Green PoE Load Indicator: Green Warranty 2 year Safety Approvals CE/FCC
PT-POS301GWS-AD is a single port midspan Injector with 4 Pair PoE up to 60 watts of power at 55 VDC at 1.10 amp. Designed for the PoE++ powered 60w poe switch Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, 60w poe switch supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. outdoor poe switch Enclosed in an IP40 fire retardant metal case, designed for outdoor installation with a Din-rail mount tracking. outdoor poe switch operates with a wide input voltage of 44-57 VDC or 100-240Vac 50 or 60 Hz. The effective distance limitation of 100 meters over Cat5e/Cat6 cables can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender) PoE Switch for network camera Specifications Parameter Description Key Features Industrial Boost PoE Solar Application Lighting Protection DIN Rail Part Number PT-POS301GWS-AD Ports condition LAN Port*1, SFP Port*1, PoE Output Port*1 Regulatory Compliance IEEE802.3bt RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5 (+), 7/8 () & 3/6 (+), 1/2 () Output Power Voltage: 55Vdc User Port Power: 60W Guaranteen Input DC Input Voltage: 44 to 57 Vdc AC Input Voltage: 100 to 240 Vac Working Environment Operating Temperature: -40 to 65 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -40 to 85 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 4KV Differential mode surge protection (10/700us): 1.5KV Line-Earth 1.2/50us (8/20us): 2KV Line-Line 1.2/50us (8/20us): 1KV
PT-PSE106GW is a single port midspan Injector with 4 Pair PoE up to 60 watts of power at 55 VDC at 1.1 amp. Household PoE Injector Designed for the PoE++ powered 60W PoE Powered Devices (PDs), such as wireless APs, base stations, high power cameras, door locks, displays, POS, information kiosks and other high power Ethernet terminals. It is also compatible and safe to use with any IEEE802.3af/at compliant terminals. It supports 10/100/1000Mbps of data rates. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. China PoE Injector for camera Enclosed in an IP40 plastic case, designed for indoor use. It operates with input voltage of 100-240 Vac, 50 or 60 Hz. The effective distance limitation of 100 meters over Cat5e/Cat6 cables. Can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender). China Lighting Protection POE Specifications Parameter Description Key Features Part Number PT-PSE106GW Ports condition LAN Port*1, AC Input Port*1, PoE Output Port*1 Regulatory Compliance IEEE802.3af/at/bt RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5 (+), 7/8 () & 3/6(+),1/2(-) Output Power Voltage: 55Vdc Output Power Current: 1100mA User Port Power: 60W Guaranteen Input AC Input Voltage: 100 to 240 Vac AC Input Current: 1.5A Frequency: 47 to 63Hz (50/60Hz Typ.) Working Environment Operating Temperature: 0 to 40 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -20 to 70 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters AC Surge Protection Line-Earth 1.2/50us (8/20us): 2KV Line-Line 1.2/50us (8/20us): 1KV Mechanical Characteristics Case: Metal Color: Black Mounting: Wall-mounted IP Rated: IP40 Connectors: Shielded RJ-45*2 Size: 193mmX 85mmX 41mm Weight: 415gï¼?0.88lbï¼? LED Indicator Power Indicator : Green PoE Load Indicator : Green @â?¤30W Blue @>30W â?¤60W Warranty 2 year Safety Approvals cUL / UL / CB / CE / FCC / PSE / SAA
Designed for the PoE++ powered 60W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. We provide high quality PoE Injector, UL certification PoE, POE for DIN Rail, dc poe injector and soon. poe injector 60w Enclosed in an IP40 fire retardant plastic case, designed for indoor installation with Wall-mounted. It operates with a wide input voltage of 36-72 VDC. The effective distance limitation of 100 meters over Cat5e/Cat6 cables can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender). high quality PoE Injector Specifications Parameter PoE Injector for camera Description Key Features Wall-mounted Part Number PT-PSE106GW-AR-D Ports condition LAN Port*1, DC Input Port*1, PoE Output Port*1 Regulatory Compliance IEEE802.3bt RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5 (+), 7/8 () and 3/6 (+), 1/2 () Output Power Voltage: 55Vdc User Port Power: 60W Guaranteen Input DC Input Voltage: 36 to 72 Vdc DC Input Current: 2.5A Working Environment Operating Temperature: 0 to 40 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -20 to 70 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 6KV Differential mode surge protection (10/700us): 1.5KV Line-Earth 1.2/50us (8/20us): 6KV Line-Line 1.2/50us (8/20us): 4KV AC Surge Protection Line-Earth 1.2/50us (8/20us): 2KV Line-Line 1.2/50us (8/20us): 1KV Mechanical Characteristics Case: Plastic Color: Black Mounting: Wall-mounted IP Rated: IP40 Connectors: Shielded RJ-45*2 Size: 193mmX 85mmX 41mm Weight: 380gï¼?13.4ozï¼? LED Indicator Power Indicator : Green PoE Load Indicator : Green @â?¤30W Blue @ï¼?30Wâ?¤60W Warranty 2 year Safety Approvals CE/FCC
PT-PSE105GB-E is a single port midspan Injector with 4 Pair PoE up to 90 watts of power at 55Vdc, at 1.63Amp with 6Kv surge protection. Designed for the PoE++ powered 90W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, injecteur poe supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. China PoE Injector for IP Cameras Enclosed in an IP40 high-impact metal case with DIN Rail mount bracket, designed for indoor use but can work outdoor by covered with waterproof case. It works with a wide input voltage of 12-48Vdc make it possible for solar application and operates under -40 to +65, For planning purposes, the effective distance is 100 meters over Cat5e/Cat6 cables. PoE Injector supplier and PoE Injector manufacturer :Creative Lianjie Network Technology Co., Ltd injecteur poe Specifications Parameter Description Key Features Industrial PoE can be outdoor use by covered with waterproof case Surge protection at PoE port Gigabit data rates 12-48VDC input make it possible for solar application DIN Rail mount IP40 high-impact metal enclosure Extend temperature from -40 to 65 Diagnostic LEDs Part Number PT-PSE105GB-E Ports condition LAN Port*1, PoE Output Port*1, DC input Terminal Block *1 Regulatory Compliance IEEE802.3bt RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5(+), 7/8(-) & 1/2(-),3/6(+) Output Power Voltage: 55Vdc User Port Power: 90W Guaranteen Input DC Input Voltage: 12 to 48Vdc DC Input Current: 8.0A Working Environment Operating Temperature: -40 to 65 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -40 to 85 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 6KV Differential mode surge protection (10/700us): 1.5KV Mechanical Characteristics Case: Metal Color: Black Mounting: DIN-rail IP Rated: IP40 Connectors: Shielded RJ-45*2 Size: 144.5mmX 95mmX 35.4mm Weight: 400gï¼?0.88lbï¼? LED Indicator Power Indicator: Green PoE Load Indicator: Yellow Warranty 2 year
PT-PSE105GWS-2D is a single port midspan Injector with 4 Pair PoE up to 60 watts of power at 55 VDC at 1.10 amp. PoE Switch for base stations Designed for the PoE++ powered 60W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. PoE Switch for Ethernet terminals Enclosed in an IP40 fire retardant metal case, designed for outdoor installation with a Din-rail mount tracking. It operates with a wide input voltage of 44-57 VDC, 50 or 60 Hz. The effective distance limitation of 100 meters over Cat5e/Cat6 cables can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender) We also provide poe adapter, PoE Splitter for wireless APs PoE Switch for VoIP phone China Specifications Parameter Description Key Features Industrial Boost PoE Solar Application Lighting Protection DIN Rail Part Number PT-PSE105GWS-2D Ports condition LAN Port*1, SFP Port*1, PoE Output Port*1 Regulatory Compliance IEEE802.3bt RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5 (+), 7/8 () & 3/6 (+), 1/2 () Output Power Voltage: 55Vdc User Port Power: 60W Guaranteen Input DC Input Voltage: 44 to 57 Vdc Working Environment Operating Temperature: -40 to 65 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -40 to 85 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 4KV Differential mode surge protection (10/700us): 1.5KV Mechanical Characteristics Case: Metal Color: Black Mounting: DIN-rail IP Rated: IP40 Connectors: Shielded RJ-45*2 Size: 144.5mmX 104.2mmX 60mm Weight: 400gï¼?0.88lbï¼? LED Indicator PowerIndicator: Green PoE Load Indicator: Yellow SFP Indicator: Green Lan Indicator: Yellow Warranty 2 year Safety Approvals CE
24W, 48V/24V output power Data rate: 10/100Mbps Full protection for OCP, OLP and OVP LED indication for power and POE status
1.N1000©\4c hdmi 1080p nvr *1pcs support poe 2.204ip100 *4pcs 720p ip camera meter ir dome support poe 3.Dc12v 5a power *1pcs 4.Dc 1 to 4pcs cable *1pcs
