1. POE has the general characteristics of thermoplastic elastomers. The flexible chain crimp structure of octene and the crystalline ethylene chain serve as physical crosslinking points, so that it has both excellent toughness and good processability. 2. Low price and relatively small density, so low volume price; 3. Excellent heat and cold resistance, wide range of operating temperature; 4. Good weather resistance and aging resistance. Because there is no unsaturated double bond in the molecular structure of POE plastics, it has excellent aging resistance. 5. Oil resistance, compression resistance and abrasion resistance are not so good; 6. POE plastics have narrow molecular distribution, good fluidity and good compatibility with polyolefin. 7. Good fluidity not only can improve the dispersion effect of filler, but also can improve the strength of products weld mark.
Features of Dwell s EPE(EVA/POE/EVA) solar film extrusion line: Film Layers structure: According to the finished film, EVA/POE/EVA film has three layers(EPE film). It will be based on the customer requirements, EPE solar film extrusion line can also produce EVA or POE single layer. China EVA / POE / EPE solar film is used for solar cell encapsulation. After lamination and curing, it is bonded and sealed. It plays the role of high light transmittance, preventing water vapor penetration, high and low-temperature resistance, and ultraviolet light resistance to ensure the stable and efficient use of battery modules. It is a durable and reliable packaging material. The EVA / POE / EPE packaging film extrusion line of Dwell machinery is in a leading position in the world. Advantages of the Dwell EPE(EVA/POE/EVA) solar film extrusion line If producing EPE film, the line speed of the EPE solar film extrusion line can reach 12m/min-15m/min, if EVA, can reach15-18m/min, and if POE, can reach 10-13m/min. Cooling parts to ensure shrinkage rate is less than 3%. DWELL special winder to ensure micro-tension, and achieve automatic winding and cutting. Comparison of the Dwell EPE(EVA/POE/EVA) solar film and EVA solar film and POE solar film 1.Transparent EVA solar film: with high light transmittance, it is used for bonding glass and cells; The raw materials are EVA resin and various modifiers, which are cheaper. 2.White EVA solar film: compared with transparent EVA solar film, the pretreatment of white fillers such as titanium dioxide is added. It has a strong barrier, low light transmittance, and high reflectivity, which can improve the power generation of components. It has strong resistance to damp-heat aging and ultraviolet aging and can inhibit the aging and cracking of the back sheet. 3.Poe solar film: Poe solar film has a higher water vapor barrier rate and stronger anti-PID performance so the module can be used for a long time. It is the main packaging adhesive film of a double-sided double glass module and film module at present. 4.EPE(EVA/POE/EVA)solar film: It has both the anti-PID performance of POE and lamination efficiency of EVA solar film and reduces the use of POE particles to achieve cost reduction and efficiency increase. At present, it is mainly used in high-efficiency components.
High-speed copper plating of welding wire is brown brown liquid, which is used for non electrodeposition of high-speed copper plating film on iron to facilitate wire drawing process. It can make copper ions deposit orderly, make copper deposit compact, and have strong adhesion. At the same time, the complexing agent can also effectively complexe excessive iron ions in the tank solution, so that the tank solution remains stable. The deposition film is golden yellow and pink, which is loved by users. It can be used as immersion or continuous production line. The weight of copper film is 5-20g/m2
Potassium Monopersulfate compound, a white, free flowing crystalline granule, is non-toxic, odorless, and easily soluble in water. It is an efficient, environmentally friendly, and multifunctional acidic oxidant. General Information Product Name Potassium Monopersulfate compound CAS 70693-62-8 Chemical formula 2KHSO5 KHSO4 K2SO4 Molecular weight 614.7 Specification Appearance White, free flowing granule Available Oxygen, % 4.5 KHSO5,  % 42.8 Loss on Drying  % 0.15 Bulk Density, g/L 0.80 pH (10g/L,25 C) 2.0 .4 Sieve Residue on 75 m test sieve, % 90.0 Packaging Product is packaged in plastic woven bags lined with polyethylene film, with a net weight of 20kg/bag or 50kg, or the packaging form and net content can be determined through negotiation according to customer requirements. Storage Store in a cool and well ventilated warehouse to prevent exposure to sunlight, rain, and moisture. Prohibit mixing with reducing substances for storage.
Aluminium, solar panel, aluminium extrusion, aluminium profile, secondary aluminium.
THINTEXOTM-Modified Starch Low viscosity modified starch for warp yarn sizing SPECIFICATIONS Appearance : off white to cream colour fine free flowing powder Solubility : Insoluble in cold water pH value( 15 % aqu. soln) : 5 to 7 Viscosity of 15% soln : Max 60 cPs (Brookfield viscometer ( Spl.2 , rpm:100 @ 80oc) LVDV II+ pro) Moisture content (w/w) : Max 13% Ash content (w/w) : Max 0.5% Sieve Retention (60 Mesh) : Max 1% Bulk density (gm/ml) : 0.45 to 0.55 SPECIAL FEATURES : Constant viscosity. Optimum penetration & film formation. Better flexible film . Easily de sizable product . Warp- break reducer. STORAGE Keep away from direct sunlight and store in a cool, dry, and well-ventilated place. STABILITY - Stable for one year from the date of manufacture PACKING - Available in 50Kgs Net weight PP Bags with a moisture-proof line inside.
Drying Type Garlic Peeling Machine Garlic dividing- peeling machine is an advanced and large-scale garlic dividing -peeling equipment, which has obtained the national invention patent. No-water garlic peeling machine The machine adopts the integrated flow mode of dividing, flaking and air stripping. The raw materials and peeled products of garlic gradually come out, with small gas consumption, high output and no noise. Besides, it is equipped with garlic waste skin extrusion molding device, which is environmentally friendly and pollution-free. The successful development of this new technology has become an important mechanical equipment in the garlic processing industry . The remarkable features of the machine are as follows 1. Garlic does not need to be cut into roots, and the equipment will automatically peel garlic petals from the root. 2. Automatically split the garlic and peel it. 3. The feeding and conveying, flaking, continuous peeling and finished product output are all automatic. 4. The machine can automatically collect the waste garlic skin and extrude it into pieces, which is convenient for waste skin treatment. 5. The machine is clean and undamaged. 6. The machine also has the characteristics of low power consumption and no noise. Have full-automatic / semi-automatic garlic peeling machine ,big capacity garlic peeling production line and customized design!
JHG tinted glass is produced by metal oxides to the float glass. The colour may be transferred in the series of blue, green, grey, bronze flexibly. The performance of visible light, privacy and solar heat transmission will be changed arrording the colour change. Different tinted glass offers varied application possibility-from interior partitions, to home appliance, to furniture, to facades and auto field. Reflective glass is float glass with a metallic coating that cuts off solar heat.The coating film may provide mirror effect, preventing visibility from outside and preserving privacy. JHG mainly offer 2 kinds of reflective glass. Hard reflective glass (on line) includes blue, green, grey, bronze, pink, silver colour, Soft reflective glass (off line) includes golden, silver, purple colur. Specification Sizes:1220*1830/1830*2440/1650*2140/2140*3300/2140*3660/2440*3660/2250*3660/3300*4500/5100/6000mm Thickness: 3-12mm Quality standard GB11614-2009/SGCC/EN 572
rLDPE repro Yellow pellets from post-consumer & post-industrial films. The material is shredded and washed through a wash plant before it is processed through degassing and very fine filtration to produce high purity reprocessed resin. r-LDPE yellow is a blown film grade and exhibits excellent processability and good balance of toughness, strength and stretch properties. This grade is also be suitable for profile and sheet extrusion Packing: 1000kg bulk bag Melt flow rate (190�?C / 2.16kg) 0.5 �± 0.5 Density 0.92 �± 0.015 Measured on blown film of 25 �µm and BUR of 2.5 at external testing facility. rLDPE Yellow is typically extruded at a melt temperature around 190�?C (min 180�?C, max 240�?C). Mesh filters: 150 on the laser filter and 120 on the piston filters.
Material: LDPE Repro pellets White Category: LDPE Type: Repro pellets Color: White Quantity: 250 Tons Loading weight: 25 Tons Specification:LDPE white reprocessed from post-consumer & post-industrial films. The material is shredded and washed through a wash plant before it is processed through degassing and very fine filtration to produce high purity reprocessed resin. LDPE White is a blown film grade and exhibits excellent processability and good balance of toughness, strength and stretch properties. This grade is also suitable for extrusion (profile, sheet, pipe) blow moulding and injection moulding LDPE applications. Packaging : 1000kg bulk bag Melt flow rate (190C / 2.16kg) 1.4-1.6 ± 0.5 g 10 mins -1 (EN ISO 1133) Density 0.92 ± 0.015 g cm-3 EN ISO 1183-1 Filtration 110- 130 µm Quantity: 15-20loads per month
Origin: United Kingdom Material: LDPE Repro pellets Yellow Category: LDPE Type: Repro pellets Color: Yellow Quantity: 500 Tons Loading weight: 24 Tons Specification: "rLDPE repro Yellow pellets from post-consumer & post-industrial films. The material is shredded and washed through a wash plant before it is processed through degassing and very fine filtration to produce high purity reprocessed resin. toughness, strength and stretch properties. This grade is also be suitable for profile and sheet extrusion Packing: 1000kg bulk bag Melt flow rate (190�?C / 2.16kg) 0.5 � 0.5 Density 0.92 � 0.015 Measured on blown film of 25 �m and BUR of 2.5 at external testing facility. rLDPE Yellow is typically extruded at a melt temperature around 190�?C (min 180�?C, max 240�?C). Mesh filters: 150 on the laser filter and 120 on the piston filters."
LDPE natural lumps - 44,000 lbs/cont. Product from film line. Quantity 2 load per month. Place of Origin: : JAPAN, US, EUROPE Unit : Ton/Tons Minimum Order : 25 Tons Payment Term : T/T 50/50 and L/C 100% at sight Estimate Lead Time : 15 - 20 days Origin: Tokyo, Yokohama, Hamburg, New York, Long Beach Supplying Capacity : 200 tons/month Packaging : Bales
HIPS Regrind White-Mix Thermoplastic PS has two representatives as GPPS and HIPS resin. In particular, PS HIPS plastic is more popular thanks to many advantages and applications. PS HIPS belongs to the group of hard, transparent resins that are easy to color, machined by suction lamination method and easy injection technology. Common HIPS applications: In packaging technology, it is used as a single-layer packaging for products that do not require strict antioxidant requirements. Make coating HIPS plastic film to increase water vapor and gas resistance. Making a printing surface to increase printing ability, making the outer plastic packaging with the ability to tear easily and create gloss. Making bottle caps, pen cases, jewelry boxes, beer tanks, fresh food containers. Making pharmaceutical bottles, pipes, cap for solvent containers. Making high-frequency insulating materials, insulation clamps. Making imitation leather sandals, textile packaging. Pressing students' tables and chairs, pressed motorcycle details, yogurt cup, plastic candy tray. MATERIAL: HIPS Regrind White-Mix CATEGORY: HIPS TYPE: Regrind White-Mix SPECIFICATION Product- HIPS regrind post production from Yogurt caps Contamination â?? up to 2% foil metalizing (cover of the yogurt caps). Food grade material Post - industrial Sheet Extrusion & Vacuum forming Origin: Spain LOADING WEIGHT: 24 Ton FOB (USD/Ton): 650$ - 850$ Packaging: Jumbo Bag Est. Shipping Time: 15, 30, 45 days
Fd-bm800-v five layers blow film extrusion line Fd-bm800-v five layers blow film extrusion machine can produce various kinds of film according to different raw materials and processing technology, which has the function such as resisting high temperature, resisting low temperature, cooking, hot enveloping and printing, etc. It can produce following composite film: a/b/c/d/e, a/b/c/b/a, a/b/c/d/c etc. The composition can be changed freely, the calculated parts can calculate exactly, so can reach the aim to save the expensive material. So it is the ideal equipment to produce five layers film of pa, evoh, pvdc material. 7000kg
Item Test condition Test Method Value Unit Density ISO 1183 0.944-0.955 g/cm3 MFR 190 C/2.16kg ISO 1133 0.03-0.07 g/10min Tensile strength at yield ISO 527-2 22 MPa Elongation at break ISO 527-2 >350 % ESCR F50,50 C,100% ASTM D-1693A 1000 h VICAT ASTM D-1525 126 C For extrusion packaging film, rope, woven bags, fishing nets, water pipes; injection of low-end commodity and housing, non-bearing load components, plastic box, turnover box; extrusion blow molding containers, hollow products, bottles.
Item Test condition Test Method Value Unit Density ISO 1183 0.944-0.955 g/cm3 MFR 190 C/2.16kg ISO 1133 0.03-0.07 g/10min Tensile strength at yield ISO 527-2 22 MPa Elongation at break ISO 527-2 >350 % ESCR F50,50 C,100% ASTM D-1693A 1000 h VICAT ASTM D-1525 126 C For extrusion packaging film, rope, woven bags, fishing nets, water pipes; injection of low-end commodity and housing, non-bearing load components, plastic box, turnover box; extrusion blow molding containers, hollow products, bottles.
We are devoted to making sustainable improvement to offer superior quality products, satisfactory services uninterruptedly for the market and competitive price for the customer. We believe to make you satisfy, is our target forever. Under our efforts, we have already established good business relationship with some domestic and overseas. Our Goods remain free from Dust Particles, External Coatings, Oil or grease coatings and foreign contamination. We are capable to supply around 100 MT per week or as per buyers capacity. In very brief, our specialization and expertise lies in trading all kinds of ferrous and non ferrous scrap, specifically are as follows below: COPPER WIRE SCRAP 99.9 ALUMINUM EXTRUSION 6063 ALUMINUM UBC CAN SCRAP BOPP FILM (ROLL) SCRAP