Q611F pneumatic ball valve We are the manufacturer of solenoid valves,angle seat valve,pneumatic actuator, pneumatic ball valve, pneumatic butterfly valve, pneumatic solenoid valves, pneumatic filter, regulator, pneumatic hose and fittings, pneumatic cylinder.
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
Sudhanafluid pneumatic valve series: butterfly valve The butterfly plate of the butterfly valve is installed in the diameter direction of the pipe. In the cylindrical channel of the butterfly valve body, the disc shaped butterfly plate rotates around the axis with a rotation angle of 0 �°~90 �°. When the rotation angle reaches 90 �°, the valve is fully open. The butterfly valve is simple in structure, small in volume and light in weight, and only consists of a few parts. Moreover, the valve can be quickly opened and closed only by rotating 90 �°, which is simple to operate. At the same time, the valve has good fluid control characteristics. When the butterfly valve is in the fully open position, the thickness of the butterfly plate is the resistance when the medium flows through the valve body, so the pressure drop generated by the valve is very small, so it has good flow control characteristics. The butterfly valve has two sealing types: elastic seal and metal seal. For elastic sealing valves, the sealing ring can be embedded on the valve body or attached to the periphery of the butterfly plate. The valve with metal seal is generally longer than the valve with elastic seal, but it is difficult to achieve complete sealing. The metal seal can adapt to higher working temperature, while the elastic seal has the defect of being limited by temperature. If the butterfly valve is required to be used for flow control, the main thing is to correctly select the size and type of the valve. The structure principle of butterfly valve is especially suitable for making large diameter valves. Butterfly valves are not only widely used in petroleum, gas, chemical industry, water treatment and other general industries, but also used in the cooling water system of thermal power plants. There are two kinds of butterfly valves commonly used: wafer type butterfly valve and flange type butterfly valve. Wafer type butterfly valve uses stud bolts to connect the valve between two pipe flanges. Flange type butterfly valve has flanges on the valve, and bolts are used to connect the flanges on both ends of the valve to the pipe flanges.
The pneumatically regulated ball valve is a rotary ball valve with a 90° angle, which can also be called a pneumatic O-type ball valve. It is composed of a pneumatic actuator with a quarter stroke and a ball valve. It is a specially designed and carefully manufactured product based on the introduction of foreign advanced technology. The pneumatically regulated ball valve adopts intelligent control and positioning, and it is matched with the electric valve positioner. It can control the operation by inputting 4~20mADC signal and 0.4~0.7MPa air source to realize the adjustment of pressure, flow, temperature and liquid level. Pneumatically regulated ball valves are powered by compressed air. The valve stem drives the valve core to rotate 90° in the valve body to achieve full-opening-closed action. Pneumatically regulated ball valves are classified into metal seals and soft seals according to their sealing properties. The pneumatic O-type regulating ball valve has the advantages of compact structure, small volume, reliable operation, good sealing performance, easy maintenance, convenient installation and strong adaptability. Pneumatically regulated ball valves are particularly suitable for applications where the media is viscous, particulate-containing, or fibrous. Pneumatically regulated ball valves are widely used in industrial automation control systems such as petroleum, chemical, teaching equipment, light industry, high-voltage equipment, pharmaceutical, papermaking, etc. for long-distance centralized control or local control
Pneumatic ball valve Nominal dimension: 1/2 " ~12 " (dn15~dn300) Valve body material: wcb/cf8/cf8m Ball material: ss316 Valve stem: ss316 Sealing material: ptfe Connection: flange, thread, welding, Approved by the authenticate of api607 fire protection Manufacture standard: gb, jb, iso, ansi, din, jis Options Solenoid valve Limit switch box Positioner Pc to carton box, carton box to plywood case
T-pav903 serie: valve body:stainless steel, valve connection:screwed, valve way:2/2 and actuator double acting or single acting types. Da:actuator double acting , sr:actuator single acting . Application:water, air, hot water, steam, oil, aggresive media, gas, foot industry, chemical industry, Tork actuator features body extruted.Aluminium, hard anodized Caps die cast aluminium, electrostatic painted Pistons die cast aluminium Supp.Air 4-6 bar Ball valve body full borei, aisi 316 stainless steel and 3 parts body Way: two way. O-ring ptfe Pressure suitable low and high pressure. Temperature -20....140 c degree Working pres. Pn 40 bar(1/2"..11/4") , 16 bar(11/2"...3") Test bntnall valves are tested 48 hour, at 20 barda 50 pcs
Pneumatic Actuated Ball Valve
Pneumatic actuated ball valve manufacturer Europe is a leading manufacturer of pneumatically operated ball valves in . For its operation, a pneumatic ball valve is paired with a pneumatic actuator. It's a tough valve that shuts off perfectly. It can also be employed for fine media flow in throttling applications. Europe offers high quality Pneumatic Ball Valves with a long service life. This type of valve ensures a secure shutdown. Features of Pneumatic Actuated Ball Valve It has both sides seals coated with internal balls and can deliver tight cut-off even after years of operation, according to Pneumatic Actuated Ball Valve features. The ability to open and close quickly. The actuator is small. Are you seeking for a reputable manufacturer of pneumatic ball valves With our manufacturing facility and warehouse in , we are one of the leading pneumatic ball valve manufacturers in . We are primarily concerned with achieving complete customer loyalty through the provision of dependable, high quality industrial valves. We produce valves that are cost effective without sacrificing quality. Available materials CF8M, CF8, SS316, CF8M, WCB, WC6, WCC, LCB, LCC, SS304, SS316 Class 150 to 2500 Nominal Pressure PN6 to PN450 Size 12 to 48 Ends Flanged, Buttweld, Socket weld, Threaded. Operation Pneumatic Actuated For more details visit here: https://www.valvesonlyeurope.com/product-category/pneumatic-actuated-ball-valve/
Pneumatic 904L Ball valve Control ball valve Rotary motion control valve Control valve 904L valves for phosphoric acid, 904L valve Technical Specification Design Standard: API, ASME, EN, ISO, JIS, DIN, BS, GB Connection type: Flange, Wafer, SW, NPT, BW Pressure range: 150LB~1500LB, 1.0MPa~25.0MPa, JIS10K~100K Size range: NPS3/8-32, DN10~DN800 Drive: Lever, Gear, Electric, Pneumatic actuator
Pneumatic Actuator Ball Valve The pneumatic actuator ball valve is a ball valve equipped with pneumatic actuators. The pneumatic actuator ball valve performs relatively quickly, with the fastest switching speed of 0.05 seconds / times, so it is also commonly called the pneumatic quick cut-off ball valve. Pneumatic ball valve is usually equipped with various accessories, such assolenoid valve, air source processing triplet, limit switch, control box, etc., to realize local control and remote distance centralized control, can control the valve switch in the control room, do not need to run to the scene or high and dangerous manual control, saving human resources, time and safety to a large extent. Specific categories of pneumatic ball valve are, stainless steel pneumatic ball valve, plastic pneumatic ball valve, sanitary level pneumatic ball valve, carbon steel pneumatic ball valve, two-way pneumatic ball valve, three-way pneumatic ball valve, four-way pneumatic ball valve. If you are looking for more details, kindly visit our website.
Pneumatic Sanitary Ball Valve Overview: Pneumatic sanitary ball valve (quick-installation ball valve) is a sanitary valve that meets high-standard manufacturing standards. It is usually connected to the pipeline by a card box and quick-installation method. It can be more convenient for dry disassembly, maintenance and cleaning. Pneumatic sanitary ball valves are made of SUS304 and 318L stainless steel materials. The inner and outer surfaces have been polished and sterilized, and have undergone precise inspection procedures and strict quality management. They can meet the needs of wine, food, biopharmaceutical and other industries. special requirements. The pneumatic sanitary ball valve adopts the all-inclusive F4 seal, which is easy to clean without any dead ends, and has no individual accumulation area. It is completely clean and meets the standards of food hygiene. Pneumatic Sanitary Ball Valve Features: 1. The pore size of the pneumatic quick-loading ball valve is consistent with that of the pipeline, and the surface is smooth without dead ends, and no sediment will be generated; 2. The inner wall of the flow channel is polished and sterilized to fully meet the sanitary standard; 3. Pneumatic sanitary ball valve adopts all-inclusive fluorine-lined (PTFE) sealing form, there is no dead angle and easy to clean: 4. Pneumatic quick-loading ball valves are all made of stainless steel, and the inner wall of the flow channel is 0.5um electronically polished to keep the fluid unimpeded. Application of Pneumatic Sanitary Ball Valve: Pneumatic sanitary ball valves are equipped with solenoid valves, travel switches and other related accessories, which can be used for remote automatic control, and can also be equipped with valve positioners to input 4-20mA signals according to the needs of working conditions, so as to adjust the quality of the pipeline, and the pneumatic hygiene The inner wall of the ball valve is long and smooth, no dead angle, seamless, automatic exhaust and other channels, and it is also very suitable for the needs of cleaning in place. It is widely used in food, sour wine, beverages, dairy products, fine chemical pharmaceuticals and biological engineering, etc. Many industries.
Overview of pneumatic regulating ball valve: According to the structural form, the pneumatic regulating ball valve can be divided into pneumatic O-type regulating ball valve or dynamic V-type regulating ball valve. It is mainly used with the valve positioner to make a press signal according to the input and output 4.20mA, so that Control the rotation opening of the ball valve valve. To achieve the proportional adjustment of pipeline medium pressure, flow rate, liquid door and other parameters, among them, the pneumatic/type adjustment glass closure has knotted and removed shape objects (throwing gaps, which can adjust the flow rate according to the change of the opening area in the middle of the field, and can cut off the fluid Closed by impurities contained in the medium, suitable for the control of pulp, mortar, viscous fluid, Pneumatic regulating ball valve principle: The pneumatic regulating ball valve uses compressed air as the driving force to drive the ball flower to rotate back and forth, so as to achieve the opening and closing of the valve. Size, to achieve different degrees of proportional adjustment to the medium flow. When the pneumatic actuator receives the signal from the control system, it generates a corresponding thrust according to the size of the control force, and pushes the adjustment mechanism to drive the valve core to move, and completes the flow and pressure adjustment of the medium in the pipeline. It has a large rated flow coefficient. , good sealing effect, adjustable performance, etc.
Pneumatic Actuator Ball Valve The pneumatic actuator ball valve is a ball valve equipped with pneumatic actuators. The pneumatic actuator ball valve performs relatively quickly, with the fastest switching speed of 0.05 seconds / times, so it is also commonly called the pneumatic quick cut-off ball valve. Pneumatic ball valve is usually equipped with various accessories, such assolenoid valve, air source processing triplet, limit switch, control box, etc., to realize local control and remote distance centralized control, can control the valve switch in the control room, do not need to run to the scene or high and dangerous manual control, saving human resources, time and safety to a large extent. Specific categories of pneumatic ball valve are, stainless steel pneumatic ball valve, plastic pneumatic ball valve, sanitary level pneumatic ball valve, carbon steel pneumatic ball valve, two-way pneumatic ball valve, three-way pneumatic ball valve, four-way pneumatic ball valve.
Pneumatic Actuator Ball Valve The pneumatic actuator ball valve is a ball valve equipped with pneumatic actuators. The pneumatic actuator ball valve performs relatively quickly, with the fastest switching speed of 0.05 seconds / times, so it is also commonly called the pneumatic quick cut-off ball valve. Pneumatic ball valve is usually equipped with various accessories, such assolenoid valve, air source processing triplet, limit switch, control box, etc., to realize local control and remote distance centralized control, can control the valve switch in the control room, do not need to run to the scene or high and dangerous manual control, saving human resources, time and safety to a large extent. Specific categories of pneumatic ball valve are, stainless steel pneumatic ball valve, plastic pneumatic ball valve, sanitary level pneumatic ball valve, carbon steel pneumatic ball valve, two-way pneumatic ball valve, three-way pneumatic ball valve, four-way pneumatic ball valve.
valve type:butterfly valve valve body and disc: UPVC valve seat: EPDM valve stem: SS304 valve size: DN25-DN200, 1"-8" end connection: wafer media: water,oil,gas etc working pressure: PN10bar working temperature:-20C-+120C air pressure: 3-8bar actuator type: rotary 90degree
China Pneumatic Actuated Ball Valve The pneumatic 3 way ball valve from UTMOST pneumatic ball valve factory can be used under extremely harsh application conditions, such as high temperature, high pressure, high frequency, abrasion, corrosive medium, and crystalline medium. The stainless steel pneumatic ball valve has its own characteristics and advantages, such as short opening and closing time, stable torque, long service life and reliable sealing which can ensure free opening and closing. UTMOST pneumatic ball valve factory is one of professional pneumatic ball valve manufacturers. If you want to know the pneumatic ball valve price and get oem ball valve, please contact us. Pneumatic Actuated Ball Valve Technical Specification Size: From 2" up to 24â?? Body material: Carbon Steel, Alloy Steel, Stainless steel, Nickel-based High-temperature Alloys, Titanium Alloys, etc. End connections: Flanged(FF, RF, RTJ) Pneumatic ball valve working pressure: From Class150LB to Class2500LB Standard compliance: ASMEB16. 10, ASMEB16. 34, ASMEB16.5, API 6D, API 608 For more other valve control system specifications request, please contact with Utmost china valve factory. What is the Difference between Pneumatic Ball Valve and Other Valves? UTMOST pneumatic ball china valve factory's actuator operated ball valve compared with gate valves, stop valves, and our wholesale butterfly valve, the medium flow resistance is extremely low. The valve can be driven by pneumatic, electric, hydraulic, gas-liquid linkage, electric-liquid linkage, manual, etc. Utmost has its own brand of pneumatic actuator, and can also select the brand and structure of actuator according to the customers' requirements. Pneumatic Actuated Ball Valve Datas Technical Performance of Pneumatic Control valve Ball Valve Structural Style BAã?»F, BA-S, BA-P Nominal Size DN/NPS NPSl/4 (DN6> â?? NPS24(DN600) Nominal Pressure PN/ANSI Classl50 (PN20) â?? Class2500 (PN420) Applicable Temperature -196�°C â?? 816�°C Valve Housing Material Carbon Steel, Alloy Steel, Stainless steel, Nickel-based High-temperature Alloys, Titanium Alloys Valve Structure 2/3 Piece Type, Cast/Forged Suitable Media Oxygen, Hydrogen, Slag Water, Cinder Actuator Type Pneumatic Rack and Pinion Type, Pneumatic Fork Type, Electric, Electro-hydraulic, Gas-hydraulic Seal Test Standards API 598, MSSSP-61, ISO 5208, ANSI/FCI 70-2 Reference Standards ASMEB16. 10, ASMEB16. 34, ASMEB16.5, API 6D, API 608
â??Product Name: Pneumatic flange ball valve Valve Type: Ball valve Design Standard: GB,ANSI,DIN,JIS Working Pressure: 0~1.6Mpa Medium: water, gas, oil, acid, alkali Medium Temperature: -20�ºC~+180�ºC Port Size: DN15-DN200 Connection: flange Structure: floating full port Body Material: cast steel, stainless steel Seat Material: PTFE Application: water system, waster water system, oil& gas industry Driving Way: Pneumatic actuated Actuator Material: Aluminium Alloy Actuator Model: AT52D-AT115D Action: double-acting Rotary Angle: 90�° Air Pressure: 4~8bar Cylinder Size: 52-115 mm Output Torque : 20-344 NM Working Temperature: -20C~+80C Air Access: G1/4" Warranty: 12 months
Brief introduction of pneumatic three-way ball valve: Pneumatic three-way ball valve is used for medium reversing, confluence and diversion in pipelines. It is mainly composed of T-type or L-type three-way ball valves connected with pneumatic actuators. According to different connection methods, it can be divided into flanges and internal threads. Pneumatic three-way. type ball valve is to switch or store the flow direction of two mutually perpendicular channels, and achieve the distribution function, while the T-type ball valve can not only switch the flow direction of the material, but also make the three channels Interconnect or close any one of the channels to play the role of diversion and confluence. According to the needs of T conditions, a valve positioner and other related accessories can be installed on the pneumatic one-pass valve liner to control the operation of the ball valve core. Achieve automatic control of the medium in the pipeline. Advantages of pneumatic three-way ball valve: 1. Different connection forms can be selected, which are divided into pneumatic flange three-way ball valve and pneumatic thread three-way ball valve to meet different working conditions. 2. Sealing effect, the elastic deformation of soft seal tetrafluoroethylene can achieve leak-free sealing. 3. One valve with multiple functions: it can be made into an L-shaped port or a T-shaped port to achieve functions such as distribution, confluence, and diversion. 4. The pneumatic three-way ball valve is easy to install, and any port can be used as the flow inlet of the medium, and there is no leakage 5. It is widely used in environmental protection, oil products, metallurgy, steam, energy, papermaking, food and other pipeline systems to change the flow direction of the medium or achieve the separation or mixing of the medium. Pneumatic three-way ball valve standard specification: 1.Design and manufacture: GB/T12237-1989; API608. 2.Inspection and test: GB/T13927-1992; API598. 3.Flange connection: JB/T79]-2-1994; ASME/ANSIB165. 4. Structure length: JD-2002 Response device: also called limit switch, remote feedback switch signal (explosion-proof) Solenoid valve: choose two-position five-way for double action, two-position three-way for single action (explosion-proof) Triple piece: It can stabilize the air source, filter, and add lubricating oil to the cylinder Valve positioner: Input 4~20mA signal to realize valve adjustment function YT-1000R
China ball valve with pneumatic actuator of water company With sophisticated technologies and facilities, strict top quality handle, reasonable value, exceptional support and close co-operation with clients, we are devoted to furnishing the ideal worth for China ball valve with pneumatic actuator of water company,2 Threaded Ball Valve,China china centre-pivoted butterfly valve manufacturer. With our experienced technical team, we are always working on technical updates in order to get you satisfied with our products. Our strong technical force, high quality and first-class marketing and after-sales service are your best choice!The product will supply to all over the world, such as Martinique ,Samoa ,Hungary ,Gibraltar ,Curacao . Most people firmly believe we've the whole capacity to provide you happy solutions. The above products have passed professional certification, and we not only can produce OEM-standard products but we also accept Customized Products order. If you have any question during using and maintaining, just dial to the after-service team, they will give rapid response, and help to solve the problems you are meeting.Culturally, suppliers can be reluctant to question things they do not understand.
Description: Product Name: Italian Wafer Type Thin Ball Valve Wafer Ball Valve with Pneumatic Actuator Connect form:wafer Size: 1/2" - 4". Suitable medium: water, oil, steam, Suitable temperature: -40 - +150°C. Working pressure: 1.6 -2.4 - 6.4. On-off Number: 300 - 400. Main material: 304 and 316. Design and manufacture adoption: ISO, API, GB, BS, we are strict with the security and quality ,it was accepted by clients and sells to internal, external market.
