Pneumatic actuators are devices that convert the energy of compressed air or gas into a mechanical motion that regulates one or more final control elements. Designation Value Maximum operating pressure 16 bar Maximum operating temperature (�°C) 120�°C Cylinder starts operating pressure 1 bar Cylinder completely opening pressure 3 bar Bore 60 mm Strokes 40 mm Operating load 630 N Precompression load 300 N
Full conformance to the latest specification:iso5211, din3337, vd/vde3845and namur. The extruding high intensity aluminum body possess a honed internal surface coated with hone anode oxygenation for long life, low coefficient of friction and swift performance. Excellent, compact and modernized construction along with multi-specifications make the selection both economic and beneficial. All acting surfaces adopt high quality bearings, resulting in low friction, high cycle life and no noise. The two independent external travel stop adjustment bolts can easily and precisely adjust both open and close directions. Same outline actuator have the functional modes of double acting and spring, and the spring return has the normal-open and normal-close styles. Multi-function position indicator with numer is convenient for mounting accessories. Pre-compressed load spring is convenient for safe mounting and teardown procedures. Die-casting aluminum pistons and end caps have high intensity and light weight. Different o-rings materials are available for high and low temperature. According to different demands we can offer multi-travel rotations (e.G. ) and three Position actuators. Solenoid valves are easily mounted without any connecting plank.
HIC Series pneumatic actuator Design HIC Series pneumatic actuators incorporate latest mechanical technology, materials available and our patented technology, through designing, developing, testing and engineering application, we have obtained a high grade product with the characteristics of reliability, high performance, long cycle life, large adjustment, and highest levels of corrosion protection, wide selection of model with easy and economy. Structure 1. Indicator Position indicator with NAMUR is convenient for mounting accessories such as limit switch box, positioner and so on. 2. Pinion The pinion is high-precision and integrative, made from nickel alloy steel, full conform to the latest standards of ISO5211, DIN3337, NAMUR. The dimensions can be customized and the stainless steel is available. 3. Actuator body According to the different requirements, the extruded aluminum alloy ASTM6005 body can be treated with hard anodized, powder polyester painted (different colors is available such as blue, orange, yellow etc.) or PTFE or nickel plated. 4. End caps Die-casting aluminum powder polyester painted in different colors, PTFE or nickel plated. 5. Pistons The twin rack pistons are made from die-casting aluminum treated with hard anodized or made from cast steel with galvanization .Symmetric mounting position, long cycle life and fast operation, reversing rotation by simply inverting the pistons. 6. Travel adjustment External stroke adjustment screw can adjust í+4ípat the position of 90íp. 7. High performance springs Preloaded coating springs are made from the high quality material for resistant to corrosion and longer cycle life, which can be demounted safely and conveniently to satisfy different requirements of torque by changing quantity of springs. 8. Bearings & guides Made from low friction, long-life compound material, avoid the direct contact between metals. The maintenance and replacement are easy and convenient. 9. O-rings NBR rubber o-rings provide trouble-free operation at standard temperature ranges. For high and low temperature, viton or silicone is used. Features í± Extruded aluminum ASTM6005 body with both internal and external corrosion protection having honed cylinder surface for longer life and low coefficient of friction. í±Dual piston rack and pinion design for compact construction, symmetric mounting position, high-cycle life and fast operation, reverse rotation can be accomplished in the field by simply inverting the pistons. í±Multiple bearings and guides on racks and pistons, low friction, high cycle life and prevent shaft blowout. í±Modular preloaded spring cartridge design, with coated spring for simple versatile range, greater safely and corrosion resistance, longer cycle life. í±Die-casting teeth on piston and pinion for accurate low backlash make rack and pinion engagement with maximum efficiency, having long term corrosion resistance with stainless steel fasteners. í±Full conformance to the latest specifications:ISO5211, DIN3337 and NAMUR or product interchangeability and easy mounting of solenoids, limit switches and other accessories.
Extruded aluminum astm6005 body with bath internal and external corrosion protection having honed cylinder surface for longer life and low coefficient of friction. Dual piston rack and pinion design for compact construction, symmetric mounting position, high-cycle fife and fast operation, reverse rotation can be accomplished in the field by simply inverting the pistons. Multiple bearings and guides on racks and pistons, low friction, high cycle life and prevent shaft blowout. Modular preloaded spring cartridge design, with coatedspring for simple versatile range, greater safely and corrosion resistance, longer cycle life. Fully machined teeth on piston and pinion for accurate low backlash rack and pinion engagement, maximum efficlency. Stalnless steel fasteners for long term corroslon resistance Full conformance to the latest specifications: is05211, din 3337 and namur or product inter changeahility and easy mounting of solenoids, limit switches and other aocessodes.
Actuator Model AT pneumatic actuator Actuator Material Aluminium Alloy Action double- acting, single acting normally closed, single acting normally open Rotary Angle: 90 Output Torque : 6.2NM-4944NM Cylinder  Size 32mm-270mm Air Pressure 4~8bar Working Temperature -20C~+80C Standard GB/ISO/DIN
AT pneumatic actuator We are the manufacturer of solenoid valves,angle seat valve,pneumatic actuator, pneumatic ball valve, pneumatic butterfly valve, pneumatic solenoid valves, pneumatic filter, regulator, pneumatic hose and fittings, pneumatic cylinder.
SD series Pneumatic Actuator (Scotch Yoke)
SS Series Pneumatic Actuator (Scotch Yoke)
AP Series (Stainless) Pneumatic Actuator (Rack & Pinion)
Qgsy series miniature pneumatic actuator is researched and developed by ourselves with importing italian advance craftwork technology. And has passed the wholly test by the professional valve test center. Through the rotation of gear piston and take compressed air as dynamo to alter the inner air pressure of cylinder to 90 torque can be used for each kind of rotary type straight travel regulating valve, ball valve, butterfly valve, globe valve, plug valve etc.
Stainless steel pneumatic actuator Pressure range: max. Working pressure 10bar Cover material: stainless steel Double-acting: 2.5bar~8bar Single-acting: 2.5bar~8bar Adjustment range: 905 Lubrication: all the moving parts are coated with lubricants, extending their service life Life time: one million time Pc to foam box, foam box to carton box, carton box to plywood case
Pneumatic actuator at series Pressure range: max. Working pressure 10bar Double-acting:2.5bar~8bar Single-acting:2.5bar~8bar Adjustment range: 905 Lubrication: all the moving parts are coated with lubricants, extending their service life Life time: one million time Type: single-acting, double-acting I. Actuator body Boy material is aluminium alloy. Internal and external surface are treated with anodic oxidation and polishing. Outer surface is nickle plated so that the anti-corrosion fuction of actuator and minimum friction against pistons can be guaranteed. Ii. End cover End cover material is die-casting aluminium. End cover is treated with epoxy polyester so as to best guarantee the anti-corrosion performance. Iii. Drive shaft The drive shaft material is medium carbon steel with fine processing and nickle plating so that the pistons have better quality in anti-corrosion, anti-friction, etc. Iv. Piston Piston material is die-casting aluminium alloy. Maxmium torque can be output when the actuator is actuated with certain pressure. V. Piston seal Nbr-70 rubber sealing is applied to ensure the normal and reliable performance of actuator under normal temperature. Fpm can be also applied according to clients' requirements. Vi. Travel adjustment Plus/mimus 5 degree travel can be adjusted through the two bolts. Pc to carton box / foam box, then to plywood case
Stainless steel pneumatic actuator Model: srt050, 063, 075, 088, 100, 125, 145, 160, 210 Pressure range: 0-1.0mpa Medium temperature: -20c~+180c Ambient temperature: -20c~+60c Actuator cylinder, cap, shaft, components: stainless steel 304 Type: double acting, spring return Torque: from 7.3n.M to 3730 at 5 bar air supply pressure Pc to foam box, foam box to carton box, then to plywood case
PNEUMATIC ACTUATOR RP75DA original Relying on the profound industrial heritage of Deyang, Sichuan, YOYIK focuses on the innovative manufacturing of power generation equipment and accessories. The company not only has a modern production line, but also pays more attention to the training and introduction of talents. It has brought together a group of technical experts from well-known power station projects. They have integrated their valuable experience into product design and production, so that YOYIK's products always maintain an industry-leading position in performance and durability. From conventional accessories to customized solutions, YOYIK can always meet the diverse needs of customers. In the following text, you will see our extensive selection of spare parts for power stations: #DF-PNEUMATIC ACTUATOR RP75DA original-DF Jacket nut HTWTLM-DG15 non-return valve M-SR20KE15-1X Gasket-Body to top plat for Dome DN100 P5460E-00 O-ring �?9.25*1.78 control valve butterfly type 80DSF4PB3 Lubrication Station regulating valve A A10VS0100 DRS/32R-VPB12N00-S1439 rocker seal 18632-10 key 06001/B 18*11*33 solenoid valve J-110VDC-DN6-UK/83/102A O-RING RUBBER 23*3.1 Shaft sleeve XB26-2006-165 shut off valve WJ20F-3.2P Impeller lock nut B2207-82-24A EH oil shock-absorbing pipe clamp SP542PA-DP-AS Skin NXQ-1400L terminal box With terminal place of electric motors 1LE0001-3AB63-4JA6-Z315L Dust ring YJM132-0004 solenoid valve 220vac CCP230D 22.3W 230VAC impeller XFP 250M-CH2 PE 1100/4 3-Way Air Solenoid Valve 5M3V410-15NC Accumulator bag 6.3L NXQA-6.3/10-L-A LP accumulator bladder QXF-5 Solenoid valve 9214602\220VAC sewage pump 50ZL-28 oil pump installation 100LY-215-2 Main engine oil pump 2CY-8/3.3 Solenoid Valve 4WE10D31/CG110N9K4 main oil pump cushion PVH131R13AF30B252000002001AB010A The electromagnetic valve DXJ5-DOL100/10N/E0K11 steam trip valve F3DG5S2-062A-50-DFZK-V Flexible coupling MST-20 Oil engine pressure control valve F3RG06D330501732G10S Inlet end cover liner 4FK5D32M-04-15 Sealing ring of EH oil system 60*72*14 circulation pump HTGY300B.0-09 Solenoid Valve SV310-02 PNEUMATIC ACTUATOR RP75DA original PNEUMATIC ACTUATOR RP75DA original MY-DFYL-2024-7-29
Wenzhou Sudhanafluid JAT type aluminum alloy piston pneumatic actuator bolt 304 stainless steel Ball Valve Butterfly Valve Double Acting Pneumatic Actuator Pneumatic actuators are widely used in ball valves and butterfly valves. Low cost, compact structure and long service life. Pneumatic actuator type: single acting (spring return) or double acting. Color: Orange, Blue, Black, Dark Gray. We accept OEM colors and brands. Pneumatic actuator working pressure: 4~8bar Bottom connection: iso5211 Solenoid valve standard: Namur Pneumatic actuator accessories: limit switch box, solenoid valve, positioner.
RD / RS series Pneumatic Actuator (Rack & Pinion type)
Linear Actuator Features & Specialities Double Acting, Single Acting Compact and Rigid Light weight construction Torque Range - 10 Nm to 30,000 Nm Supply Pressure - 4.5 Bar to 9 Bar Certifications - CE, ATex, SIL2 With Position Indicator DIN / ISO Mounting as standard Quick Operation - Best suitable for quick motion requirements and other applications Maintenance free Easy spares availability
Rotary Actuator Features & Specialities Double Acting, Single Acting, 180 Deg and Quarter Turn actuators Compact and Rigid Light weight construction Torque Range - 10 Nm to 20,000 Nm Supply Pressure - 4.5 Bar to 9 Bar Certifications - CE, ATex, SIL2 Optional - Manual Over ride, Positioner, Limit switch, 180 Deg Rotation, etc. With Position Indicator DIN / ISO Mounting as standard Single Moving internal part, efficient torque transmission with minimum torque loss Quick Operation - Best suitable for emergency shutdown valves and other applications Maintenance free Easy spares availability ONE-to-ONE fitting, no mounting brackets or fabricated attachments required
Pneumatic valve actuator description: 14 types ( da 32- da 270 ). Offering a broad range of pneumatic rack & pinion actuators. The ports are namur standard for easy solenoid valve connection. Iso 5211 dimensions on all sizes. All internal and external surfaces are anodized for corrosion resistance. Actuator have a regulation range from-4° to +4°. Shaft bearings isolate the pinion gear from the housing and support the shaft for high cycle. Actuator can be lifted on many styles of quarter-turn valve, including ball, butterfly and plug and dampers. Pneumatic valve actuator operation: Working pressure: 2.5 bar – 8 bar. Working temputure: Standard range: -20? - +80?. Low temperature range: -40? - +80?(hnbr). High temperature range: -20? - +150?(vition). Factory lubricated for life under normal vorking. Operating media – dry or lubricated air, non-corrosive and inert gas or light hydraulic oil. Angle of rotation: 0° to -90°± 4°.
Features: pneumatic rotary actuator, spring return, for 6" valves.Mount directly to keystone butterfly valves (sold separately) to provide remote operation. No brackets are required. Spring return models close automatically when air is shut off. 1/4" fpt air connections. Rated supply pressure is 120 psi (150 psi max.). Sleeve adapters included.Get more information please contact us. At the same time, we still can offer the items as below: Keystone spring return pneumatic actuator ke790-300s Keystone spring return pneumatic actuator ke790-200s Keystone pneumatic actuator mrp Keystone double acting pneumatic actuator ke790-300k Keystone pneumatic actuators mra Keystone pneumatic actuator 79u Keystone double acting pneumatic actuator ke790-200 Keystone double acting and spring return mrp Keystone spring return pneumatic actuator ke790-600s Keystone spring return pneumatic actuator ke790-300s Keystone spring return pneumatic actuator ke790-200s
