Cylinders and pistons of our production for tractors (mtz (belarus), htz (tractor t-150), chtz, yumz, dt-75, t-25, t-40) and vehicles: kamaz, maz, kraz, uaz, zil, ural, gaz.
Spare parts for automobile, tractor and combine internal combustion engines like cylinder liners, pistons, piston pins, sealing rings.
Big size rings.
Silver jewellery products like silver rings, bracelets, earrings, pendants, chains, necklaces.Production
Crispy sticks - onion rings Net weight per piece: 0.040 kg Quantity of pieces in a cardboard box: 60 Box size: 59.5 x 32.5 x 39.5 Pallet dimensions: 1200mm x 800mm x 2110mm Boxes for pallets: 24 Number of packages per pallet: 1440 Net packaging weight: 0.55 kg Gross weight: 3.10 kg Shelf life: 6 months Minimum order - 1X40 'FCL / 840 boxes / 50 400 pcs
Crispy sticks - squid rings Net weight per piece: 0.040 kg Quantity of pieces in a cardboard box: 60 Box size: 59.5 x 32.5 x 39.5 Pallet dimensions: 1200mm x 800mm x 2110mm Boxes for pallets: 24 Number of packages per pallet: 1440 Net packaging weight: 0.55 kg Gross weight: 3.10 kg Shelf life: 6 months Minimum order - 1X40 'FCL / 840 boxes / 50 400 pcs
Crispy sticks - squid rings Net Weight per Piece: 0.060 kg Quantity of pieces in a cardboard box: 60 Box size: 59.5 x 32.5 x 39.5 Pallet dimensions: 1200mm x 800mm x 2110mm Pallet Boxes: 24 Number of packages per pallet: 1440 Net packaging weight: 3.6 kg Gross packaging weight: 4.37 kg Shelf life: 6 months Minimum order - 1X40 'FCL / 840 boxes / 50 400 pcs
Applications: designed for delivering treated water (feedwater) at the pumping temperature of up to 438К ted, nsure a normal functioning of the balancing device, its chamber is to be communicated with the suction pipeline. A bearing end cover, fitted in the non-drive side bearing housing, has a shaft position indicator for sight control of the wear of balancing device surfaces and for restraining rotor axial displacements towards the delivery side. The pump rotor is carried by the plain bearings with ring lubrication (with forced lubrication from a pressure lubrication installation for the pump pe 270-150). The design of pump shaft seal chambers provides both for housing mechanical seals and for packing the stuffing boxes, which are to fed with cooling liquid. Sense of rotation of shaft in all the pumps is counterclockwise (clockwise in case of pe 270-150), if viewed from the drive side. Pump designation: first number indicates the capacity, m3/h; the second number indicates the head, kgf/cm2.
Applications: designed for handling liquefied hydrocarbon gases, volatile flammable and inflammable liquids as well as solutions of inorganic alkalis (sodium hydroxide) at the process plants in the oil-refining industry. May be also used to transfer water and condensate in the steam and water circuit systems. Design: ndms series motor pump units consist of a centrifugal pump and an induction motor in the explosion-proof version, which are mounted on a common fabricated base plate. The pump and motor shafts are connected by means of a flexible coupling. The pump units shall be rigidly anchored to the foundation, and piping shall be also rigidly connected to the pumps. The pumps as components of the pump units are electrically driven horizontal, centreline-supported, multistage ring section centrifugal pumps with rotor axial thrust balancing by a balance drum.
Applications: Designed for delivering treated water (feedwater) at the pumping temperature of up to 438K (165C) into the fossil-fueled stationary boilers with absolute steam pressure of maximum 13.7 MPa (140 kgf/cm2). Capacity, Q = 100 m3/h, Head, H = 580 m, Speed of rotation, 2970 rpm, NPSHr = 4 m. The pump units shall be rigidly anchored to the foundation, and piping shall be also rigidly connected to the pumps. The pumps are motor-driven horizontal, centreline-supported, between-bearings multistage ring-section centrifugal pumps with single flow impeller arrangement. The pump casing comprises a suction casing, a delivery casing and a set of stage casings, which are concentrically aligned with respect to each other on rabbeted fits and are bolted together with tie bolts. Diffusers are built in the stage casings and delivery casing. The suction and delivery casings have flanged suction and discharge pump nozzles respectively, which are oriented vertically to the top. The rotor axial thrust is automatically balanced with a balance disc. In order to ensure a normal functioning of the balancing device, its chamber is to be communicated with the suction pipeline. A bearing end cover, fitted in the non-drive side bearing housing, has a shaft position indicator for sight control of the wear of balancing device surfaces and for restraining rotor axial displacements towards the delivery side. The pump rotor is carried by the plain bearings with ring lubrication. The design of pump shaft seal chambers provides both for housing mechanical seals and for packing the stuffing boxes, which are to fed with cooling liquid. Sense of rotation of shaft in all the pumps is counterclockwise, if viewed from the drive side.
Applications: Designed for handling condensate in the steam and water circuit systems of the thermal power stations that burn organic fuel. May be also used to transfer water in heating plants and water supply systems. Performance of the Pump: Capacity, Q = 80 m3/h, Head, H = 155 m, Speed of rotation, 2940 rpm, NPSHr = 1.6 m The pump as a component of the pump unit is an electrically driven horizontal multistage ring-section centrifugal pump between bearings, with single flow impeller arrangement. The suction casing, delivery casing and stage casings are bolted together with tie bolts to form a pump casing. The suction nozzle integrally cast with the suction casing is located horizontally at side (radially to the pump centerline). The discharge nozzle integrally cast with the delivery casing is oriented vertically upwards. The pump casing is supported at the bottom with feet integrally cast with the suction and delivery casings. The pumping unit alignment is maintained during its operation due to dowelling the delivery casing to the baseplate, whilst the other end of the pump can slide axially thus allowing for free expansion of static components.
Applications: designed for pumping condensed waste steam from stationary steam turbines and heating steam condensate (drain water) from heat exchangers in the thermal power stations that burn organic fuel. May be also used to transfer water in heating plants and water supply systems. Design: aksv series pump units consist of a centrifugal pump and an induction motor mounted on the motor stool. They are connected by means of a rubber-bushed (pin-and-bushing) flexible coupling. The pumps are electrically driven vertically suspended, can diffuser, single-stage (ksv 125-55) or multistage centrifugal pumps with inducer and single flow impeller arrangement (with all the impellers facing the same way). An outer casing (barrel) and an inner casing (withdrawable element or cartridge) are the major pump components. The barrel is a construction made of steel plate by complete welding process, which integrates a suction chamber (in the form of a can) and a discharge chamber (the discharge head proper). Pump support feet and weld-end suction and discharge nozzles are welded to the barrel. The inner casing (a rotating assembly) of ring-section type comprises a bare rotor, a shaft seal bearings, stage casings with built-in diffusers and a delivery cover. The design of pump shaft seal chamber provides for both housing a mechanical seal (-t) and packing the stuffing box (-s). The shaft of the pump make КсВ 125-140-3М is sealed only by means of packed gland.
We produce piston, plunger and telescopic hydraulic cylinders with a piston diameter from 32 to 300 mm, with a rod diameter from 10 mm to 250 mm and with a stroke up to 8000 mm, with any kind of mountings and attachments. Our cylinders are available in many versions. Type: - single/double acting - plunger - single/double acting telescopic cylinders - welded - screwed (ISO) - low pressure to max. 350 bar - end/position damping - valve tehnology - integrated sensors
Ring Carded cotton yarn from Ne 7/1 to Ne 30/1
Blogger Set Pro Life Hack Improved GP-BS002 The Life Hack blogging set is your indispensable assistant in professional shooting of content, publishing it on TikTok, Instagram, Facebook, YouTube and other Internet resources. The 5-in-1 blogger kit includes: a ring Led lamp, a tripod, a microphone - a buttonhole, a holder for a smartphone, Bluetooth remote control. LED Ring Light: Outer diameter - 26 cm; Inner diameter - 20 cm; Three lighting modes - cold, warm and neutral; Three modes of light intensity - weak, medium, strong; Temperature range - 3000-6500K; Voltage: 5 V; Power: 8 - 10 W; Power Source: USB 2m. DC5V Lapel microphone Microphone Type: Condenser; Frequency response of the capacitor: 20 Hz - 16 kHz; Sensitivity: - 38; Resistance 3 dB:
Blogger Set Gelius Pro Life Hack GP-BS001 The blogger Set Life Hack is your indispensable assistant in professional content filming, publishing it on Instagram and Facebook, YouTube and other Internet resources. The set includes: 1. Special ice lamp-ring - allows you to adjust the lighting and direct it to a specific object, in order for your videos, photos to be ideal. Specifications: Outside diameter - 26 cm. The inner diameter is 20 cm. Three lighting modes - cold, warm and neutral Three light intensity modes - weak, medium, strong Temperature range - 3000-6500K Voltage: 5V Power: 8 - 10 W Power Source: USB 2m. wire DC5V 2. Tripod tripod - allows you to fix the lamp with the holder in a stable and desired position and also convenient to carry when the tripod is in the assembled state. Specifications: Height in assembled condition - 19 cm. Disassembled height - 12 cm. 3. Wired microphone with clothespin - allows you to clearly record sound with the help of a double Jamproof condenser, a special shielding, silent, tensile cable 1.8 m., And with the help of a clothespin it can be placed on clothes and not hold in hands. Specifications: Microphone Type: Omni - MD06050L Condenser Capacitor Frequency Response: 20 Hz - 16 kHz Sensitivity: - 38 + Resistance 3 dB:
Flexible wc connector, waste drainage pipe, sealing rings, gasket, siphon, flexible pipe, floor drains, filling hose.
Flexible WC connector reinforced. Lenght: 330/558/830 mm.
Vermicelli 1,2 mm Elbows 6 furrowed Fusilli 9 (4 rays) Spirali 6 furrowed Penne 7 furrowed Tagliatelle Shells 9 furrowed Elbows 4 furrowed Elbows 3 smooth Elbows 7 smooth Spirali 3,5 furrowed Creste di gallo 6 Macaroni 8 furrowed Rings 8 furrowed
Generator set for factories and enterprises with the need for autonomous power supply of more than 2000 kWt. (Gas piston unit of container design, power over 2.5 MW) Model: MTU 20V4000 GS Fuel: natural gas Manufacturer: "mtu A Rolls-Royce solution" Working principle: piston engine Condition: new Detailed specifications will be sent as a PDF file in messengers or by e-mail. In the presence of 5 pcs., geographically located in Turkey, ready to provide fast delivery to any city
