Pilot Plant Suppliers and Manufacturers

Pilot plant Pilot plant(pbt/pet/pen/ptt) Capacity from 1-1000l, perfect laboratory equipment.One or two reactors are adopted, computer Control system and htm electrical heater is used in the equipment, The pilot plant is highly specialised and versatile systems that are designed and Built to meet the needs of the most demanding research and development teams. Supplied as self contained units, variety of polymer types: pbt, pet, pen, pa and other thermoplastics.Polytex chemical engineering co., ltd

Use only one plant to do hundreds of experiments is come true. We invented this plant with our rich experience in liquid concentration and separation in bioengineering, food and pharmaceutical, chemical and environmental industries. We installed three types membrane on it, there are spiral wound, plate (sheet) and tubular membrane. Various precision and materials are accomplished in one plant. Save large cost, and avoid failure and bad operation in big scale projects, help you find out the best solution. Application: Bioengineering: Clarification, concentration, separation of protein, polypeptide, amino acid etc. fermentation products; Separation, purification, and concentration of biochemical pharmaceutical intermediate; Desalination and refining of synthetic substances. Food and Pharmaceutical: Clarification and refining of sugar products; Clarification and concentration of gelatin, starch concentration and pyrogen removal; Separation, filtration and clarification of plant extracts; Separation, purification,sterilization, pyrogen removal of oral liquid and preparation; Removal and concentration of pigment; Filtration and refining of fruit and vegetable juice. Chemical and Environmental: Product desalination; Separation, purification and refining of high temperature solvent system. Treatment of oily waste water, ultrafine particle recycling in wastewater. Installed Membrane: Spiral Wound Membrane: Temperature: < deg. 45 C, Material: composite, polyamide, PS, PES, PVDF, Filtration Area:0.3m2 Precision (MWCO): RO, 150Da, 300Da, 1KDa, 2.5KDa, 3.5KDa, 5KDa, 8KDa, 10KDa, 20KDa, 75KDa. Tubular Membrane: Temperature: < deg. 100 C, Material: titania, alumina, zirconia, Filtration Area: 60 to 90 cm2 Precision (MWCO):50nm, 200nm, 500nm, 800nm, 1.2u. Plate (Sheet) Membrane: Temperature: < deg. 45 C, Material: PS, PES, PVDF, PTEE, Polyamide, Filtration Area: 0.02m2 Precision (MWCO): RO, 150Da, 300Da, 1KDa, 2.5KDa, 3.5KDa, 5KDa, 8KDa, 10KDa, 50KDa, 70KDa, 100KDa, 150KDa, 0.05u, 0.07u, 0.1u, 0.2u, 0.45u, 0.7u, 1.0u, 1.5u, 3u, 5u, 10u, 20u.

Apllication :Food & beverage products high temerpature high pressure sterilization. Suit for:All kinds of heat resistant and water proof package materials. Such as:pouches,cans,glass jars,plastic containers, etc. Characteristics of spray sterilizer 1. Indirect heating and indirect cooling, the cooling water is not in contact with the process water, which avoids the secondary pollution of food. No water treatment chemicals are needed in the process.The equipment adopts high temperature and short-time sterilization. 2. Reduce steam consumption. The sterilized water after steam atomization is directly mixed in the sterilizer to improve the heating and cooling speed. 3. Low noise, creating a quiet and comfortable working environment. 4. Water is sprayed from different angles, and steam, air and water are mixed and convected to form a perfect temperature distribution. 5. A small amount of process water circulates rapidly to reach the predetermined sterilization temperature. 6. Four movable temperature sensing probes are equipped inside the autoclave, which can monitor the F value of the food center and the heat distribution in the autoclave at any time, and know the heat penetration at any time (the time when the temperature reaches the geometric center of the food from the food surface). 7. Perfect pressure control, the pressure in the whole production process is constantly adjusted to adapt to the changes in the internal pressure of the product packaging, so as to minimize the deformation of the product packaging, especially suitable for product packaged with gas inside. 8. The process water preheating system can ensure that the products with thermal insulation and heat filling are continuously heated up. 9. Softened water is used for sterilization to avoid dirt on the outer package due to the quality of process water. 10. It can save installation space, facilitate operation and save manpower (only need to use the control cabinet for direct operation). 11. It is suitable for the food industry such as beverage, and automatic loading and unloading during mass production. It is more convenient for the automatic configuration of unmanned workshops in the industry in the future.

Our company is a professional factory specializing in producing food retort sterilizer for 20 years. And we are pleased to supply our professional services and efficient machine to you. Our machine has the advantages of high efficiency, energy saving, low noise, convenient operation and labor saving. It is your powerful assistant to improve efficiency and gain more profits. Video about our factory: https://youtu.be/ofZBoLlqHXk And from the link below, you can find the high quality of our equipment. https://youtu.be/Y2bcMtNO-54 Welcome to our website www.wogoal.en.alibaba.com for more information. Any questions, please contact me at any time. Thank you & best regards!

Domestic, Engineering & General goods Specialist In : Cosmetic item like shampoo, conditioner, hair spa, face scrub, serum, CNC machines, Machine spares, Bopp Tape, Wood, Plastic, clothing & Kids garments .Export

Green coffee beans, fresh cut flowers like roses, lilies, carnations and other ornamental plants (succulent).

Glass facade systems including insulated glass systems, tempered glass, laminated glass, sentry glass, heat soak tested glass, aluminium systems of building, facade, industrial applications with new mold and extrusions..Shipping and transsportation