Apllication :Food & beverage products high temerpature high pressure sterilization. Suit for:All kinds of heat resistant and water proof package materials. Such as:pouches,cans,glass jars,plastic containers, etc. Characteristics of spray sterilizer 1. Indirect heating and indirect cooling, the cooling water is not in contact with the process water, which avoids the secondary pollution of food. No water treatment chemicals are needed in the process.The equipment adopts high temperature and short-time sterilization. 2. Reduce steam consumption. The sterilized water after steam atomization is directly mixed in the sterilizer to improve the heating and cooling speed. 3. Low noise, creating a quiet and comfortable working environment. 4. Water is sprayed from different angles, and steam, air and water are mixed and convected to form a perfect temperature distribution. 5. A small amount of process water circulates rapidly to reach the predetermined sterilization temperature. 6. Four movable temperature sensing probes are equipped inside the autoclave, which can monitor the F value of the food center and the heat distribution in the autoclave at any time, and know the heat penetration at any time (the time when the temperature reaches the geometric center of the food from the food surface). 7. Perfect pressure control, the pressure in the whole production process is constantly adjusted to adapt to the changes in the internal pressure of the product packaging, so as to minimize the deformation of the product packaging, especially suitable for product packaged with gas inside. 8. The process water preheating system can ensure that the products with thermal insulation and heat filling are continuously heated up. 9. Softened water is used for sterilization to avoid dirt on the outer package due to the quality of process water. 10. It can save installation space, facilitate operation and save manpower (only need to use the control cabinet for direct operation). 11. It is suitable for the food industry such as beverage, and automatic loading and unloading during mass production. It is more convenient for the automatic configuration of unmanned workshops in the industry in the future.