Find Verified Pet Spunbond Thermal Bonding Line Suppliers, Manufacturers and Wholesalers

Product Introduction PET spunbond substrate fabric compared with short fiber polyester tire has high tensile strength, elongation, stability, aging resistance, long service life, good wettability and other characteristics, as the internationally recognized high-performance SBS, APP and other modified asphalt waterproof roll tire. Application Area Modified asphalt waterproof coil is widely used in waterproof concrete building, such as building roof, underground structure, high-speed railway, tunnel, highway and railway bridge waterproof field.

Available Colombian Thermal Coal Offered for Sale Effective 6/10/2022 # RESOURCE BTU PORT TYPE TONNAGE/MO. PRICE SULFUR ASH MOISTURE 1 RB-1 (F) 10,400 Bolivar/Brisas Thermal B 100K MT (3 Yrs) $MT 0.65% 9.2% 8.8% 2 RB-1 (F) 10,800 Bolivar/Brisas Thermal B 40K MT (Spot) MT 0.78% 5.5% 7.7% 3 RB-1 (F) 12,400 Bolivar/Brisas Thermal A 100K MT (3 Yrs) MT 0.67% 4.5% 5.9% 4 RB-1 (F) 12,661 Bolivar/Brisas Thermal A 100K MT (3 Yrs) MT 0.89% 6.7% 3.8% 5 RB-1 (F) 12,675 Bolivar/Brisas Thermal A 100K MT (3 Yrs) MT 0.41% 1.8% 7.1% 6 RB-2 (T) 13,200 Bolivar Thermal A 180K MT (3 Yrs) MT 0.94% 3.3% 10.6% All Thermal Coal Listed Above Subject to Prior Sale This is our most recent distribution sheet outlining available thermal coal we have directly ex. Colombia, SA. These long-term and spot allocations are structured through our established production network. We can deliver product to the vessel less expensively than in the US due to lower labor cost and excessive US logistics charges. (Rail/Barge)

We can supply: PET BOTTLES (aprox. 95% CLEAR - 5% COLORS) BALES. Post consumer from sorting line. Bottles did not contain liquid inside due to the big pressing force of our baler machine. We have one of the strongest baler in Europe. Can load in 1x40HC container aprox. 26 - 28 MT. Ready for shipment. Photos available upon request. If you are interested kindly contact us for more information (price, available quantity etc.). You are welcome to visit our company premises and supervise our materials.

CHEMICAL COMPOSITION ELEMENTS CaO% MgO% SiO2% Al2O3% TFe% MnO% Cr2O3% P2O5% S% MIN 24.00 3.50 10.00 2.00 11.00 0.02 0.00 0.02 0.05 MAX 49.00 25.00 28.00 12.00 36.00 2.50 0.80 0.42 0.20 TYPICAL 39.20 12.20 16.80 4.60 21.70 1.25 0.12 0.28 0.12 PHYSICAL APPEARANCE ASPECT Agglomerate materials COLOR Gray blackish color CHEMICAL BEHAVIOR The basicity of the slag is normally fixed by the amount of lime and calcinated dolomite added, the silicon and aluminum levels of the hot metal and steel scrap charged as well as ferro-alloys. Below present our general procedures for the purchase and sale of sugar of Brazilian origin: 1- Buyer issues a Letter of Intention (LOI) addressed to Seller; 2- Seller issues a Soft Corporate Offer (SCO); 3- If Buyer accepts SCO, signs and seals SCO and then sends to Seller; 4- Seller issues Full Corporate Offer (FCO); 5- Buyer signs and seals FCO and issues an Irrevocable Corporate Purchase Order (ICPO), addressed to Seller; 6- Seller issues draft of Sale and Purchase Agreement (SPA) to be discussed and commented; 7- SPA is signed by Seller and Buyer; 8- Buyer issues draft of the Payment Instrument (SBLC/DLC) for approval by Seller�´s Bank; 9- If Seller�´s Bank accepts, Buyer issues the bank guarantee (SBLC/DLC); 10- Seller issues Performance Bond (PB) 2%; 11- Seller prepares the product and export documents; 12- Buyer receives the export documents by mail; 13- Buyer makes payment 100% to Seller�´s Bank through transfer bank (Swift Message MT-103); 14- Shipping; 15- Seller sends the original export documents to Buyer; NOTES: The financial instrument (SBLC / DLC) must be issued by the Top 50 Bank in the world ranking.

CHEMICAL PROPERTIES SIZING PROPERTIES P2O5 30 30.2 % 200 60.05 % CO2 6.00 6.30 % 160 18.99 % SO3 2.50 3.00 % 125 13.72 % CaO 50.00 51.00 % 100 4.30 % MgO 0.75 1.00 % 80 1.16 % Fe2O3 0.30 0.40 %

CHEMICAL PROPERTIES SIZING PROPERTIES P2O5 29.00 29.70 % 200 72.83 % CO2 7.2 -7.8 % 160 13.77 % SO3 2.50 - 3.00 % 125 6.58 % CaO 48.30 49.00 % 100 2.21 % MgO 1.10 1.50 % 80 3.11 % Fe2O3 0.35 0.40 %

TYPES 1 Cement 42.5 N CEM II/A-L Bulk 2 Cement 42.5 R CEM II/A-L Bulk 3 Cement 42.5 N CEM II/A-L Big Bag 1.5MT 4 Cement 42.5 R CEM II/A-L Big Bag 1.5MT 5 Cement 42.5 N CEM II/A-L NA 442 Bag 50Kg BUNDLED 2,2 MT per pallet 6 Cement 42.5 N CEM II/A-L NA 442 Bag 25kg BUNDLED 2,15 MT per pallet 7 Cement 42.5 N-LH/SR5 CEM I Bulk 8 Cement 42.5 N-LH/SR5 CEM I Bag 9 Cement 52.5 CEM I Bulk 10 Cement 52.5 CEM I Bag Below present our general procedures for the purchase and sale of sugar of Brazilian origin: 1- Buyer issues a Letter of Intention (LOI) addressed to Seller; 2- Seller issues a Soft Corporate Offer (SCO); 3- If Buyer accepts SCO, signs and seals SCO and then sends to Seller; 4- Seller issues Full Corporate Offer (FCO); 5- Buyer signs and seals FCO and issues an Irrevocable Corporate Purchase Order (ICPO), addressed to Seller; 6- Seller issues draft of Sale and Purchase Agreement (SPA) to be discussed and commented; 7- SPA is signed by Seller and Buyer; 8- Buyer issues draft of the Payment Instrument (SBLC/DLC) for approval by Seller�´s Bank; 9- If Seller�´s Bank accepts, Buyer issues the bank guarantee (SBLC/DLC); 10- Seller issues Performance Bond (PB) 2%; 11- Seller prepares the product and export documents; 12- Buyer receives the export documents by mail; 13- Buyer makes payment 100% to Seller ´s Bank through transfer bank (Swift Message MT-103); 14- Shipping; 15- Seller sends the original export documents to Buyer; Please contact for full specs on quantities, delivery terms, etc... NOTES: The financial instrument (SBLC / DLC) must be issued by the Top 50 Bank in the world ranking.

Natural Rubber SVR3L have good resilience, abrasion and surface friction properties and excellent compression set. It has low hysteresis and rolling resistance with high fatigue resistance and remains flexible at low temperatures. Natural rubber SVR3L has poor resistance to oil, sunlight and ozone and limited thermal capability. Natural rubber SVR3L is superior tear strength and excellent resistance to heat buildup continues to make it a favored ingredient for high-performance tires for race cars, trucks, buses and aircraft. Other applications include tank lining, engine mounts, seals, vibration dampening and diaphragms.

Natural Rubber SVR3L have good resilience, abrasion and surface friction properties and excellent compression set. It has low hysteresis and rolling resistance with high fatigue resistance and remains flexible at low temperatures. Natural rubber SVR3L has poor resistance to oil, sunlight and ozone and limited thermal capability. Natural rubber SVR3L is superior tear strength and excellent resistance to heat buildup continues to make it a favored ingredient for high-performance tires for race cars, trucks, buses and aircraft. Other applications include tank lining, engine mounts, seals, vibration dampening and diaphragms.

Essential details Place of Origin: AUSTRIA Type: Printer Color Print Speed: NO Interface Type: usb Max. Resolution: 203/300 dpi Max Paper Size: 80MM Black Print Speed: 260MM/S Style: Black and white Use: Receipt Printer After-sales Service: Repair, Free spare parts, Return and Replacement, Onsite Training and Inspection, Call Center and on-line Technical Support Private Mold: Yes Name: 80mm Kitchen Thermal Receipt Printer Printing Method: Thermal Line Printing Interface: USB Interface Paper width: 79.5+/-0.5 Mm Printing Speed: 150-250mm/s Power supply: DC 24V/2.5A Print Comand: ESC/POS Paper type: thermal paper Cutter: Auto Cutter Keywords: 80mm receipt printer Supply Ability Supply Ability 1000000 Unit/Units per Year thermal receipt printer Packaging & delivery Packaging Details Wall hanging order sound reminder thermal receipt printer 80mm bill ticket printer Dimension 61.5X37X53.5cm(LXWXH) 12 units / carton Lead time: Quantity(units) 1 - 300 >300 Lead time (days) 5 To be negotiated

Magnesia Bricks Description Magnesia Bricks are alkaline refractory materials. These products have over 90% magnesium oxide content and adopt periclase as the principal crystalline phase. Magnesia Bricks can be divided into two categories of Burnt Magnesia Bricks and Chemical Bonded Magnesite Brick. They have excellent performance of superior high temperature mechanical strength and volume stability. Magnesia Bricks can service in the high temperature of 1750.. They are ideal products for glass furnace application. Magnesia Bricks Features: It is a kind of alkaline refractory product with periclase as main phase magnesite-alumina spinel clinker as basic material. the product has such characteristics as good temperature vibration, good strength and volume stability in high temperature. Magnesia Bricks Application Basic open-hearth furnace for steelmaking Electric furnace bottom and wall Permanent lining of oxygen converter Non-ferrous metal metallurgy furnace Hyperthermia tunnel kiln Lining of rotary cement kiln Heating furnace bottom and wall Regenerative chamber of glass furnace Magnesia Bricks Properties High Refractoriness Good alkaline slag erosion resistance High apparent initial softening temperature Good thermal conductivity High thermal expansion Magnesia Bricks Manufacturing Process Burnt Magnesia Bricks are manufactured with magnesite clinker as the raw material and fired in the high temperature of 1550~1600 after smashing, burdening, mulling and molding. High-purity products can be fired in the temperature that over 1750. Chemical bonded magnesite brick is produced with certain chemical bonding through mixing, molding and drying.

Our products 57mm*48mm thermal paper rolls are a common paper roll size for credit card terminal printers. It is widely used for every market. Below is detail information for this product. MODEL # T574801 Product Description: Type: Single White Thermal Paper Roll Width: 57mm Roll Diameter: 48mm Weight: 55gsm Length:25meters Core size:13mm*19mm paper core Package: 10rolls shrink-wrapped ,100rolls per carton Carton size: 246mm*246mm*234mm Duration: 3years End of paper roll with red warning line 100% lint free paper reduces printer jams Specifications for Thermal Sensitive paper:

PRODUCT DATA SHEET ACID RESISTANT BRICK Material : FIRECLAY Type Acid Resistant Brick Size (mm) : 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : * We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: * Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions - Heavy thermal shock Characteristic Fireclay Type Acid Resistant Brick - Test Standard Bulk Density, lbs/ft3 - 2.25 to 2.30 ASTM C-20 Water Absorption, % - 0.1 to 1.8 ASTM C-20 Apparent Porosity, % - 4.05 to 4.14 ASTM C-20 Acid Solubility (H2SO4), Loss in Mass,% - 6.1 to 6.8 ASTM C-279 Modulus of Rupture, Mpa - 14.6 ASTM C-67 Compressive Strength, PSI - 15500 to 17250 ASTM C-67 Abrasion Resistant , Volume in mm3 - 71 to 96 EN 102 Surface Hardness, MOHS Scale - 7 Thermal Conductivity, BTU-in/hr-ft-F - 6.94 to 7.12 ASTM C-236 Thermal Expansion Coefficient,in/in/Fx10-6 - 2.6 to 2.8 EN 103

PRODUCT DATA SHEET ACID RESISTANT BRICK Material : RED SHALE Type Acid Resistant Brick Size (mm) 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions Heavy thermal shock Typical Physical Properties of GANESHAS Acid and Chemical Resistant Brick Characteristic RED SHALE ACID RESISTANT BRICK Test Standard Bulk Density, gm/cc - 2.3 to 2.35 ASTM C-20 -Water Absorption, % - 0.1 to 1.5 IS 4860-1968 Apparent Porosity, % -0.5 to 1.75 S 4860 Acid Solubility (H2SO4), Loss in Mass,% -0.1 to 1.8 ASTM C-279 Modulus of Rupture, PSI -2133 to 3555 ASTM C-67 Compressive Strength, Kg/cm2 - 700-900 IS 4860-1968 Abrasion Resistant , Volume in mm3 -69 to 85 EN 102 Surface Hardness, MOHS Scale - 7

Ramming mass is commonly used in metallurgy, building materials, non-ferrous metal smelting, chemical, machinery and other manufacturing industries. Ramming mass is widely used in non-core intermediate frequency furnace and core induction furnace. As an intermediate frequency furnace ramming material, refractory ramming is applied to melt gray cast iron, nodular cast iron, malleable cast iron, vermicular cast iron, and cast alloy steel; to melt carbon steel, alloy steel, high manganese steel, tool steel, heat resistant steel, stainless steel, molten aluminum and its alloys; to melt red copper, brass, white brass, bronze and its alloys, etc. Induction furnaces are used for melting cast iron, mild steel and various alloy steels in foundries and making of steel in mini steel plants using sponge iron The refined high silicon, low iron quartz sand and quartz powder are selected and the fused quartz sand is added as the refractory material., with no slag, no crack, damp proof, convenience of repair, and the corrosion resistance, thus greatly improving the furnace service life span and the economic benefit.. Silica ramming mass can safely be used up to an operating temperature of 1600 deg C. Since it expands very little, it is superior to both alumina and magnesia refractories to resist thermal shocks Acid ramming material is the premixed ramming mass of the lining material. The acid ramming mass is used to smelt a series of metal materials such as ordinary steel and carbon steel. The lining practice best suited to a particular furnace depends upon the capacity and design of the furnace, operation practice adopted during making of a heat, and furnace output.

* PHOSCAST Phoscast : Phosphate Bonded Castables * PURPOSE customers using FBC boilers (Particularly underbed feed FBC boilers) for the protection of inbed coils against erosion potential by applying highly abrasive resistant refractory on inbed coils above fuel feed system. BACKGROUND * Two of such actions are providing special alloy studs on inbed coils and applying highly abrasive resistant refractory on the outer bottom loops of inbed Coils which are above the fuel feed nozzles. * GANESHAS has taken number of approaches to identify the key factors affecting erosion rates with an objective to enhance the life of inbed tubes as well as implementing the corrective action to reduce the erosion rates. Phosphate coatings are often used to protect steel parts against rusting and other types of corrosion * Erosion of inbed coils in fluid bed combustor is unavoidable phenomenon however the rate of metal wastage and thus the life of tubes depends on various factors like ash & fuel properties, design of Combustor / feeding system, flue gas velocities operating conditions etc. It has been also observed that maximum erosion prone inbed coils are those which come above fuel feed nozzles and an area of approximately 1 to 1.5 mts around fuel feed systems are badly affected. APPLICATION Phoscast-90 XR can be applied by ramming with wooden mallet having adequately large head @" dia x 5" length x 10â?? Jong handle). The desired lining or repair thickness is built up in several courses while ramming the mass to uniform thickness. Phoscast refractory should never be trawled to obtain smooth surface; ramming only should finish surface. Any excess mass is to be sliced off with trowel edge and then finished by ramming again for bed coil. Tube application of AFBC boiler, the material pasty mass should be finger pressed into the studs of the tube with maximum force. Finish should be given by pressing the hand palm against material applied, using surgical type thin rubber hand gloves.