KYT series (IP55) compressor special ultra-efficient permanent magnet variable frequency motor
Frame center height: H160 ~ H355
Rated output power: 15kW ~ 250kW
This series of motors uses permanent magnet motors made of rare earth permanent magnet materials. The rotor has achieved rare earth permanent magnetization, no slip, no fundamental iron in the rotor, copper loss and less heat generation, which reduces stator current and stator resistance losses. Especially at low speeds, high motor efficiency can still be maintained.
Constant speed, achieving synchronous speed.
High power factor: A well-designed motor can achieve a power factor close to the value of 1.0.
Compact size, lightweight, and low noise.
High efficiency: During normal operation, there is no copper loss in the rotor. The high power factor results in a smaller rotor current and reduced copper losses in the rotor windings.
The motor's speed is directly proportional to the frequency, simplifying the control system.
The motor can be designed with multiple stages and low-speed high-torque capabilities, eliminating the need for a gearbox and enabling gearless transmission.
Wide speed range, with a high-speed design that can reach up to 10,000 revolutions per minute (rpm).
The segment magnets designed for motors, generators and alternators are neodymium arc segment magnets, which are usually used for rotors and stators. Several arc magnets for sale with different inner diameters and polarities can be assembled into a multistage magnetic ring. In the motor, the magnetic ring with alternating polarity on the inner radius rotates near the copper coil. As one of the leading rare-earth arc magnets manufacturers in China, Beilun Meank not only offers the choice of arc segment neodymium magnets with specific sizes but also produces custom neodymium segment magnets according to orders.
Permanent magnet DC motor(ETC)
Fan Model: Belt drive all
Phase / Voltage / Hz: 1/115/208-230V
Poles: 4
HP (KW): From 1/74-1/10
Voltage: 12/24/110/120/220 v
Insulation Class: B
Speeds / RPM: 1 Speed (1800)
Capacitor: Cap Start Induction Run
Bearings: Ball/ball
Enclosed/Open Frame: Open dripproof
Rotation: CW/CCW
Auto Thermal Protection : UL
S&P USA Part Code 605262
Current Supplier Marathon/B311
More technical datas, pls contact us and we will show you at once.
Product Name
customized silicon steel stator and rotor laminated core for high and medium voltage wind generator
Material
cold rolled non-oriented silicon steel
Supplier
WISCO, BAO STEEL ,SHOUGANG GROUP,TISCO
Process
Heat treatment, Annealing and Turning Surface
Standard
DIN GB ISO JIS
Range
Φ 100mm -- Φ 590mm
Stacked length
Max 1100mm
Service
OEM&ODM
Packing
PP + Solid Sea-worthy Carton with special process of antirust
Delivery Time
10 Days if existing compound tools are available/50 Days if we need to making tools
Product Name
silicon steel stator laminated iron core for permanent magnet motor
Material
cold rolled non-oriented silicon steel
Supplier
WISCO, BAO STEEL ,SHOUGANG GROUP,TISCO
Process
Heat treatment, Annealing and Turning Surface
Standard
DIN GB ISO JIS
Range
Φ 100mm -- Φ 590mm
Stacked length
Max 1100mm
Service
OEM&ODM
Packing
PP + Solid Sea-worthy Carton with special process of antirust
Delivery Time
10 Days if existing compound tools are available/50 Days if we need to making tools
Screw air compressor Permanent magnetic inverter
Airflow: 2.3m³/min
Working pressure: 8 bar
Motor: 15KW 20HP
380V/3PHASE/50HZ (can be customized)
Direct driven type
Pmdc motor
D23 series of permanent magnet dc motor features:
1) voltage range: 12 vdc - 240 vdc
2) steel casing diameter: 38 mm
3) the load speed range: 1000 rpm to 10000 rpm
4) the load input power: 10 w - 150 w
5) motor uses: elevator, automatic door, massager, small water pumps, and so on office automation, household appliances, fitness equipment.
We can modify or make adjustment on such as performance, dimensions according to your requirement , your satisfaction is our priority.
Product Name
permanent magnet induction motor silicon steel stator core
Material
cold rolled non-oriented silicon steel
Supplier
WISCO, BAO STEEL ,SHOUGANG GROUP,TISCO
Process
Heat treatment, Annealing and Turning Surface
Standard
DIN GB ISO JIS
Range
Φ 100mm -- Φ 590mm
Stacked length
Max 1100mm
Service
OEM&ODM
Packing
PP + Solid Sea-worthy Carton with special process of antirust
Delivery Time
10 Days if existing compound tools are available/50 Days if we need to making tools
a: The Most powerful and advanced commercially produced : BH (Max52MGOe, Three times larger than anisotropic ferrite.
b: Cost-effective: Neodymium, one of the most plentiful rare earth elements ,combined with inexpensive iron , enable NdFeB magnets the best value in cost and performance.
c: Mechanical properties : Good property coherence, high flux density , high coercivity, low oxygen content.
Unique Features of Ichoice
a: Annual Output: 3000 metric tons
b: Grades Available: N52,50M,48H,45SH,40UH,35EH,33AH Series and grades below.
c: Testing Programs: Salt Spray Test, PCT Test, HAST Test, Metallographic analysis, Magnetic Properties Test, Oxygen Test, etc.
d: Price: Advantageous for high-grade or big size or arc products.
e: Delivery time: 10-15days.
ST series servo motors have four series of dimensions, 80mm¡¢110mm¡¢130mm¡¢150mm£»four series of rated speeds 1500rpm¡¢2000rpm¡¢2500rpm¡¢3000rpm. Motor configure standard 2500P/R incremental encoder. Selection of high temperature resistance, high-energy product quality permanent magnetic material£¬optimal design of the electromagnetic parameters, can maintain the motor a good working condition and fast response on long-running. IP65 protection, the motor apply to the industrial environment in particular.
Ferrite Magnet is manufactured from oxide material by powder metallurgical process. Its advantages include:
low-cost excellent corrosion resistance, resistance to be demagnetized etc. The normal working temperature of Ferrite Magnet is between-40C and +250C.It can be magnetized before or after assembling. Generally, Ferrite Magnet can be machined to regular shapes like segments, blocks, rings and discs etc. The normal grades for
sintered Ferrite Magnets are Y10,TY25, Y30, Y30BH, Y35, etc.
Advantages of Ferrite Magnet:
Ferrites have isotropic characteristics, weak magnetic performance, has the same magnetic performance in any direction, multipolar magnetic charge. The main raw material of ferrite is oxides, so it is not corroded by high temperature, high humidity or chemicals (except strong acid and base); with excellent diamagnetic impedance, no flux loss before and after assembly and magnetic charging; working temperature is-40C to + 250C, poor temperature coefficient; Br temperature coefficient is-0.2% /C, 0.2% under Br, etc. per 1 Cincrease; high hardness, wire cutting and grinding; ferrite is brittle and fragile during production and transportation. magnetic requirements and good for strict working environment requirement.
Neodymium magnets (also known as NdFeB, Neo or NIB magnets), are strong permanent magnets made from an alloy of neodymium, iron & boron. Part of the Rare-Earth magnet family, they have the highest magnetic properties of all permanent magnets. Due to their high magnetic strength and relatively low-cost, they are the preferred choice for many consumers, commercial, industrial and technical applications.NdFeB is divided into sintered NdFeB and bonded NdFeB. Bonded NdFeB is magnetic in all directions and corrosion resistance and is divided into Bonded Compression NdFeB Magnet and Bonded Injection NdFeB Magnet; while sintered NdFeB is easy to corrosion, the surface requires coating, generally divided into axial and radial magnetic charging.
Advantages of Sintered NdFeB Magnet :
1. Very hard and brittle, high diamagnetic resistance, high cost / performance ratio, not suitable for high working temper ature;
2. Magnetic performance is higher than that of the rare earth cobalt permanent magnet, the residual magnetic induction strength, magnetic induction coercivity, the maximum magnetic energy product is very high, is the current magnetic performance of the best permanent magnet;
3. High cost performance.
Samarium Cobalt (SmCo) magnets are made by a sintering process and exist in two forms. The first is Sm1Co5(SmCo 1:5),which has a maximum energy product of between 14 and 24MGOe. The second and more common form is Sm2Co17(SmCo 2:17) which has a maximum energy product of between 22 and 32 MGOe. The main Sm2Co17 alloy is around 35% Samarium (Sm)and 60% Cobalt (Co)with the balance being from varying amounts of lron (Fe) Copper (Cu). Hafnium (Hf) and Zirconium (Zr). Praseodymium (Pr) may also be used. Sm1Co5 is made of only Sm and Co and has excellent corrosion resistance.
â?¢ Advantages of SmCo Magnet:
1.Superior resistance to high temperature.
2. Excellent resistance to corrosion, no coating is needed for surface protecting.
3.High working temperature.
4.SmCo is suitable for machines with high magnetic requirements and good for strict working environment requirement.
43025 Permanent Magnet Motor Suppliers
Short on time? Let Permanent Magnet Motor sellers contact you.
