Low voltage motors Low voltage motors are classified primarily according to their fundamental physical differences, and secondarily, according to their purpose of use. Accordingly, we divide motors into two ranges of induction motors, four types of motors for explosive atmospheres, frequency controlled motors, most notable of which are synchronous motors, and special application motors. The last category of motors include, for example, marine motors, brake motors, and smoke extraction motors, which are based on the basic induction motor but have modifications that vary according to the purpose of use. Their features are not further described here. (A) Standard induction motors: We supply two types of low voltage induction motor series: Process performance and General performance motors. The first are the most commonly chosen induction motors for demanding industrial uses. General performance motors form the basic motor series in the IE2 efficiency class. (B) Motors for explosive atmospheres: The low voltage motors for explosive atmospheres, or so called Ex-motors, comply fully with the ATEX directive 94/9/EC, which sets forth the mandatory duties and responsibilities of the supplier of products. Motors for explosive atmospheres are available from the range of 0.25 kW up to 1000 kW. (C)Frequency controlled motors: Frequency controlled motors refer to motor series that are invariably used together with a frequency converter. This category of motors includes two types of synchronous motors, namely synchronous reluctance motors and permanent magnet motors, as well as roller table motors, high speed motors and servomotors.
Medium Voltage Motors We supply three types of Medium Voltage Motors: Standard, Engineered and Motors with Variable Speed Drive. Standard motors are available of up to 750 kW Medium voltage engineered induction motor range of up to 2800 kW. Engineered motors are made according to customers' specifications. All the engineered motors are configured and optimized for each order and application. Motors for low voltage Variable Speed Drives range of up to 2240 kW. The basic mechanical construction is the same as engineered motors. As with the engineered motors all the motors with Variable Speed Drives are configured and optimized for each order and application.
â?¢ Medium Voltage Motors We supply three types of Medium Voltage Motors: Standard, Engineered and Motors with Variable Speed Drive. Standard motors are available of up to 750 kW Medium voltage engineered induction motor range of up to 2800 kW. Engineered motors are made according to customers' specifications. All the engineered motors are configured and optimized for each order and application. Motors for low voltage Variable Speed Drives range of up to 2240 kW. The basic mechanical construction is the same as engineered motors. As with the engineered motors all the motors with Variable Speed Drives are configured and optimized for each order and application.
YKK5001-4 3phase AC motor 800KW-6000V-1450RPM-4POLES 50HZ IC611 IP54 S1 F B3 Application: steel mills, rolling mills,mixer,crusher,cement, cutting machine, waterpump, compressor... Advantages: high efficiency, energy saving, low noise, low vibration, light weight, reliable performance, easy installation and maintenance...
Medium Voltage Motors : Siemens, Bharat Bijlee, ABB, Havells, Crompton Medium Voltage Motors by # Kw # Pole # Efficiency # Voltage # Frequency # Medium Voltage Motors # Crompton Medium Voltage Motors# Bharat Bijlee Medium Voltage Motors # Electric # Saudi Arabia # Oman # Mexico # Oman # Dubai # Electricals # Electric # Bangladesh # China
Electric motor 1, Good cooling effect 2, High start torque 3, Low start current 4, Low noise and vibration 5, Construction is compact 6, Temperature rise is low 7, Long hours VPI treatment 8, Stator coil is wrapped by 3 layers insulation structure 9, The end of stator coil applied the reshape fixing device to defend the coil deformation. 10, The voltage can be designed to 380,440,415,660,380/660.1140v,3kv,6kv,10kv, 11, Power is ranged from 0.75-10000KW, 12, Frame size is ranged from 80-1000mm 13, The optimal gap match is processed between of the stator and rotor. Wooden cases.
1, Good cooling effect 2, High start torque 3, Low start current 4, Low noise and vibration 5, Constrution is compact 6, Temperature rise is low 7, Long hours VPI treat ment 8, Stator coil is wrapped by 3 insulation layers 9, The end of stator coil applied the reshape fixing device 10, The voltage can be designed to 380,660,380/660.1140v,3kv,6kv,10kv, 11, Power is ranged from 0.25-10000KW, 12, Frame size is ranged from 80-1000 13, The optimal gap match between of the stator and rotor. Wooden cases.
Magnetic rotor of permanent magnet motor 1.355-1000 permanent magnet moto stator iron core 2. Grade: 50w470, 50w400, 50w350, 50w310 3. Frame size: 355-1000 4. Type: electrical steel stator lamitations 5. Certification: iso9001, ce Material Cold rolled non-oriented silicon steel Supplier Wisco, bao steel , shougang group, tisco Standard Din gb iso jis Process Cutting - blanking - punching - stacking- welding / aluminum die-casting Capacity 8000 tons monthly Range Φ 590mm -- î¦ 3000mm Stacked length Max 1100mm
Product Name IE3 Efficiency Electric Motor Generator Stator Rotor Core Material Cold rolled non-oriented silicon steel Supplier WISCO, BAO STEEL ,SHOUGANG GROUP,TISCO Standard DIN GB ISO JIS Range 80mm -- 1250mm Manufacturing Type Compound Die, Single Notching, Progressive Die, Die Casting, Centrifugal Cast Service OEM Packing PP + Solid Sea-worthy Carton with Desiccant Delivery Time 50 - 120 Days Application Three phase Induction motors, pumps, generators.
Big starting torque, low noiseip54, ip55insulation grade: frated voltage: 380v, 380v/660vrated frequency: 50hzeuropean ie2 standardmoter seat: 63-355power: 0.18kw-315kw. Wooden case fumigation certificate
