PE pipe is widely used in irrigation systems, with the advantage of easy installation, no rust, no scaling and convenient maintenance. PE pipe is widely used because of its features, such as the excellent toughness( more than 500% breaking elongation rate), non-toxic materials. It can effectively improve the safety and reliability of water supply. Features of PE pipe: 1. Good toughness, impact resistance and long service life. 2. Hot melt or welding interface with high strength. 3. Good material, no toxicity, no algae, no secondary pollution. PE pipe application: 1. Drip Irrigation System 2. Micro Spinkler Irrigation System 3. Impulse Spinkler Irrigation System 4. Main Pipe In Irrigation System
Non-toxic, corrosion resistant, low flow resistance, easy installation, longevitu, various joint availability, recycled and environment-friendly.
PE PIPE
PE PIPE
Pipe a - pe-al-pe - for cold water Pipe b - pe-rt/al/pe-rt - for hot water Pipe c - pe-al-pe - for gas supply Size 1014, 1216, 1418, 1620 - 200 m per coil Size 2025, 2632 - 100 m per coil
Ultra-high molecular weight polyethylene (uhmwpe) is a kind of engineering thermoplastics with more than 2 million viscosity-average molecular weight, under the polymerization of ethylene, butadiene monomer in the catalyst. Ultra-high molecular weight polyethylene pipe has the superior performance such as very high wear resistance, impact resistance, excellent resistance to internal pressure strength, resistance to environmental stress cracking, eminent self-lubricating, anti-adhesion, the unique low temperature resistance, good chemical stability and so on, and it is widely used in metallurgical mines, electric power, petroleum, natural gas, textiles, paper making, food, chemical industry, machinery, electrical and other industries. According to the customer's requirement or the contract agreed.
Configuration polyolefin exclusive single-screw extruder, extruder with rapid and efficient features such as. Separation of polyolefin-professional extrusion screw. Specially designed three coextrusion die, a reasonable flow, pipe outside wall smooth internal stress. Production scope º¦20-ºµ 160mm ppr pipe, the production rate as high as 16m/min. One production line, can product hdpe silicon core pipe, the ppr pipe, pe pipe, pex pipe. Antibacterial nano-tube low cost : only increase by 5% to 10% over the cost of an ordinary pipe. Wooden box
PE (polyethylene) materials due to its high strength, high temperature resistant, corrosion resistant, non-toxic and other characteristics, it is widely used in the field of water supply which is an ideal pipe to replace ordinary iron pipe. Characteristic Eco-friendly and Safer Use - Non-toxic, no heavy metal additives Good service life Impact Resistance Wear Resistance Low Temperature Resistance Lower system and maintenance costs Good Corrosion Resistance Application Urban water pipe system/urban and rural drinking water pipelin /Chemical, Chemical Fiber, Food, Forestry, Printing and dyeing, Pharmaceutical, Light Industry, Paper-making, Metallurgy, etc. /Agricultural irrigation pipeline /Post and telecommunication line/power cable protection pipeline/Mine mortar conveying pipelineï¼?can be used in trenchless project.
UHMWPE Pipe UHMWPE pipe has superior performance such as very high wear resistance, impact resistance, excellent resistance to internal pressure strength, resistance to environmental stress cracking, intrinsically self-lubricating, anti-adhesion, low-temperature resistance and excellent chemical resistance and so on. Ultra-high molecular weight polyethylene (UHMWPE) is a new kind of engineering thermoplastics with more than 3 million viscosity-average molecular weight. UHMWPE pipe has superior performance such as very high wear resistance, impact resistance, excellent resistance to internal pressure strength, resistance to environmental stress cracking, intrinsically self-lubricating, anti-adhesion, low-temperature resistance and excellent chemical resistance and so on. and it is widely used in metallurgical mines, electrical power, petroleum, natural gas, textiles, paper making, food, chemical industry, machinery, electrical and other industries. UHMWPE differs from PE standard grades in its very high degree of polymerization. UHMW is more rigid than LDPE and HDPE and has better abrasion resistance than PTFE.
Application 1. Municipal water-supply (underground) 2. Water-supply and drainage of buildings 3. Farm irrigation 4. waterscape engineering Features 1.Nontoxic: pe pipe material nontoxic, tasteless, it belongs to green building materials. 2.Corrosion resistance: High resistance to attack of various chemicals, and chemicals in the soil will not have any degradation effects on pipelines. 3.No leakage Pe pipe is connected in the ways of butt fusion, and the strength of joint point is higher than tube itself. 4. Higher flow capacity: The smooth inner wall is easy for pipeline transportation. 5. Convenient for construction and installation: Pe pipe could be installed in a variety of trenchless ways, so it is very convenient for construction and installation. 6. Lower system and maintenance costs: Pe pipe is not only convenient to transport and install, but also reduce the worker’s labor intensity and improve work efficiency. 7. Longevity: used for more than 50 years under pressure use. 8. recycled and environment-friendly
Place of Origin:CN;HEN Material:UHMWPE Brand Name:FJS Specification:DN:65-800mm Length:customized Thickness:7-38mm Standard:ISO9001:2008 product name:quality choice better than steel anti-static antioxidant UHMWPE Pipe work pressure:0.6-2.0Mpa operating temperature:-170 to 100 connection method:By flanges or fusion socket welding Elongation:>350% Roughness:
Place of Origin : China Brand Name : dalipu Model Number : API5CT Certification : API5CT Price : 60RMB/PIECE Packaging Details : in bundle Delivery Time : 3days Payment Terms : T/T Supply Ability : 5000pieces MOQ : 1pieces Contact:Bonnie Xu Email:BonneXu@dlpoctg.com WeChat:13602055205 Skype:BonnieXu22 Tel:+86-13602055205
The PE insulated pipe is made by low density polyethylene. The pipe can be coated with other materials to make it more good looking and resist to corrosion. The main characteristics of it are keeping temperature, endure with heat, resist to corrosion and fire. The pipe can be used in many areas. For example, the outdoor linkage pipes of split type air conditioners, hot water pipe and internal pipes of air-conditioners.
We are major manufacturers of pipes According customer rquirments
PE Coil Pipe (0.4-0.6MPa)
PE Geothermal Pipe Geothermal pipe transfers heat from the ground into a building to provide space heating and to pre-heat domestic hot water. Geothermal exchange is a clean energy method of heating and cooling commercial and residential buildings. The technology is proven and has been in use for decades. In simplest terms, PE pipe is buried in the ground, allowing energy transfer between the fluid in the pipe and the earth. The fluid in the piping is warmed in the winter and cooled in the summer. The system consists of buried PE pipe, a heat pump, and air distribution system. Product features of PE Geothermal Pipe : 1, Tubing chemical performance is stable, corrosion resistance, offset the insufficiency of metal pipes in this aspect. 2, Easy to bend or hot melt to be a more solid shape, and has good compression ability connect with pipes, not easy to leak. 3, Save investment - the initial investment is large, but low operating cost, the investment capital could be recovered in short term. . 4, Underground heat exchange tube use high-density polyethylene pipe. Service life for 50 years. 5, Environmental protection and energy saving: the use of electricity, no combustion process, as to the surrounding environment, taintless discharge; Need not use cooling towers, have no outside hang, do not discharge heat to the surrounding environment , No thermal conductivity effect, no noise; Do not extract groundwater , without destroying the groundwater resources; Operating cost only 40 ~ 60%for the traditional central air conditioning . 6, A tractor serves 3 purposes: heating in the winter, refrigerating in the summer and providing water annual year. It is 2-4 times as to spilt-type and window air-conditioner . Controlled by computer, and stable performance, It can be controlled by phone, going to temperature and humidity control and fresh air distribution. Advantages of PE Geothermal Pipe: 1.Lower energy costs and environment impact - a geothermal system uses 25-50% less electricity than conventional forced air heating or cooling systems. This means the less energy needed from burning fossil fuels that are harmful to the environment. 2.Free or Cheap Hot Water - unlike any other heating and cooling system, a geothermal heat pump can provide free hot water using a device called a "desuperheater". 3.Year-Round Comfort - maintains an even temperature and humidity level throughout your home with very little noise. 4.Design Flexibility - geothermal heat pump systems allow for design flexibility and can be installed in both new and retrofit situations. 5.Improved Aesthetics - geothermal systems are easy to conceal, don't require cooling towers, eliminate conventional rooftop equipment, less potential for leaks and ongoing maintenance, better roof warranties, allowing architects and building owners to plan for more aesthetically pleasing architectural designs and roof lines. 6.Low Maintenance - since workhorse part of the system - the piping - is underground or underwater, there is little maintenance required. 7.Zone Heating and Cooling - different areas of the building can be heated or cooled to different temperatures simultaneously, i.e., the heat from computer rooms can be moved to the perimeter walls for winter heating in commercial buildings. 8.Durability - with virtually no moving parts, and parts that are sheltered inside a building, a geothermal heating system is durable and highly reliable. Our piping has a life span expectancy of up to 50 years or more. Applications of Geothermal Pipe: Geothermal heating systems are a viable alternative anywhere there is a need for heat or cooling. Using the ground or pond as a heat sink in the summer and a heat source in the winter, heat is transferred from the ground in the winter and extracted from the building in the summer. Because of their design flexibility, they can be installed in both new and retrofit situations. Because the hardware requires less space than that needed by conventional HVAC systems, the equipment rooms can be greatly scaled down in size, freeing space for productive use. And since they usually use the existing ductwork in the building there is no need for any extensive renovations. This makes geothermal heating perfect for historical buildings, greenhouses, resorts and any high-energy user with long operating hours.
Colorful Steel Pipe Fitting
Product name: pert pipe and fittings. Product Introduce: Polyethylene of raised temperature resistance pipes for floor radiant heating is use ethylene and octene copolymer to produce, Have With super moisture resistant, durable resistance to static strength and good impact strength. Product Application: 1, Radiant floor heating system 2, Construction of hot and cold water supply, Piping drinking water system. 3, Food industry in the beverage, wine, milk and other liquid pipelines. Specification size: Outer diameter: 16-32mm Wall thickness: 2.0-4.4mm Nominal pressure: 1.25Mpa, 1.6Mpa, 2.0Mpa.
PPR D=20, 32, 40, 50, 63, 75, 90 HDPE D== 50, 75, 90, 120, 140, 160, 180, 200 PVC D=50, 75, 110
Application and Features 1Suitable for cutting pipes according to specified angel and dimension while making an elbow, tee or cross, which lowest the material waste and improve the welding efficiency 2 Cutting angle 67.5 degree accurate angle location