PE Geothermal Pipe
Geothermal pipe transfers heat from the ground into a building to provide space heating and to pre-heat domestic hot water.
Geothermal exchange is a clean energy method of heating and cooling commercial and residential buildings. The technology is proven and has been in use for decades. In simplest terms, PE pipe is buried in the ground, allowing energy transfer between the fluid in the pipe and the earth. The fluid in the piping is warmed in the winter and cooled in the summer. The system consists of buried PE pipe, a heat pump, and air distribution system.
Product features of PE Geothermal Pipe :
1, Tubing chemical performance is stable, corrosion resistance, offset the insufficiency of metal pipes in this aspect.
2, Easy to bend or hot melt to be a more solid shape, and has good compression ability connect with pipes, not easy to leak.
3, Save investment - the initial investment is large, but low operating cost, the investment capital could be recovered in short term. .
4, Underground heat exchange tube use high-density polyethylene pipe. Service life for 50 years.
5, Environmental protection and energy saving: the use of electricity, no combustion process, as to the surrounding environment, taintless discharge; Need not use cooling towers, have no outside hang, do not discharge heat to the surrounding environment ,
No thermal conductivity effect, no noise; Do not extract groundwater , without destroying the groundwater resources; Operating cost only 40 ~ 60%for the traditional central air conditioning .
6, A tractor serves 3 purposes: heating in the winter, refrigerating in the summer and providing water annual year. It is 2-4 times as to spilt-type and window air-conditioner . Controlled by computer, and stable performance,
It can be controlled by phone, going to temperature and humidity control and fresh air distribution.
Advantages of PE Geothermal Pipe:
1.Lower energy costs and environment impact - a geothermal system uses 25-50% less electricity than conventional forced air heating or cooling systems. This means the less energy needed from burning fossil fuels that are harmful to the environment.
2.Free or Cheap Hot Water - unlike any other heating and cooling system, a geothermal heat pump can provide free hot water using a device called a "desuperheater".
3.Year-Round Comfort - maintains an even temperature and humidity level throughout your home with very little noise.
4.Design Flexibility - geothermal heat pump systems allow for design flexibility and can be installed in both new and retrofit situations.
5.Improved Aesthetics - geothermal systems are easy to conceal, don't require cooling towers, eliminate conventional rooftop equipment, less potential for leaks and ongoing maintenance, better roof warranties, allowing architects and building owners to plan for more aesthetically pleasing architectural designs and roof lines.
6.Low Maintenance - since workhorse part of the system - the piping - is underground or underwater, there is little maintenance required.
7.Zone Heating and Cooling - different areas of the building can be heated or cooled to different temperatures simultaneously, i.e., the heat from computer rooms can be moved to the perimeter walls for winter heating in commercial buildings.
8.Durability - with virtually no moving parts, and parts that are sheltered inside a building, a geothermal heating system is durable and highly reliable. Our piping has a life span expectancy of up to 50 years or more.
Applications of Geothermal Pipe:
Geothermal heating systems are a viable alternative anywhere there is a need for heat or cooling. Using the ground or pond as a heat sink in the summer and a heat source in the winter, heat is transferred from the ground in the winter and extracted from the building in the summer. Because of their design flexibility, they can be installed in both new and retrofit situations. Because the hardware requires less space than that needed by conventional HVAC systems, the equipment rooms can be greatly scaled down in size, freeing space for productive use. And since they usually use the existing ductwork in the building there is no need for any extensive renovations. This makes geothermal heating perfect for historical buildings, greenhouses, resorts and any high-energy user with long operating hours.
Non-toxic, corrosion resistant, low flow resistance, easy installation, longevitu, various joint availability, recycled and environment-friendly.
Pipe a - pe-al-pe - for cold water Pipe b - pe-rt/al/pe-rt - for hot water Pipe c - pe-al-pe - for gas supply Size 1014, 1216, 1418, 1620 - 200 m per coil Size 2025, 2632 - 100 m per coil
PE PIPE
PE PIPE
The PE insulated pipe is made by low density polyethylene. The pipe can be coated with other materials to make it more good looking and resist to corrosion. The main characteristics of it are keeping temperature, endure with heat, resist to corrosion and fire. The pipe can be used in many areas. For example, the outdoor linkage pipes of split type air conditioners, hot water pipe and internal pipes of air-conditioners.
We are major manufacturers of pipes According customer rquirments
PE Coil Pipe (0.4-0.6MPa)
Ultra-high molecular weight polyethylene (uhmwpe) is a kind of engineering thermoplastics with more than 2 million viscosity-average molecular weight, under the polymerization of ethylene, butadiene monomer in the catalyst. Ultra-high molecular weight polyethylene pipe has the superior performance such as very high wear resistance, impact resistance, excellent resistance to internal pressure strength, resistance to environmental stress cracking, eminent self-lubricating, anti-adhesion, the unique low temperature resistance, good chemical stability and so on, and it is widely used in metallurgical mines, electric power, petroleum, natural gas, textiles, paper making, food, chemical industry, machinery, electrical and other industries. According to the customer's requirement or the contract agreed.
Mingzhu Company's PE/Steel transition pipes are buried underground. It applies to the pipeline system with the environment temperature -20íµ-40íµ and the maximum working pressure no more than 1.0MPa.The PE/Steel transition pipes can be used in the pipeline system according prEN 1555 or ISO4437.Using this kind of fitting will be great convinent, safety and reliability, low project cost and durable. Full types and specification, having the seamless steel pipe welding pattern (straight pipe, bend pipe),the seamless steel pipe thread pattern, and nodular cast iron thread pattern etc. Special,stucture,high intensity, excellent airtight property, no leaking. Anti-corrosion treatment for the metal part, be durable. The metal part can be made of copper or stainless steel etc according to the customer's requirement.