PCE Polycarboxylate superplasticizer is the newest generation superplasticizer used for concrete in domestic and abroad.It is based on molecular designs and adsorption capacity of polycarboxylate,we do R&D and successfully produce water reducing and retention type polycarboxylate superplasticizer for concrete. With initiating systerm and reaction conditions,we achieve high adaptability.Comparing with PNS and other superplasticizer, PCE has many characteristic advantages in technology and performance as following: (1) low dosage, high rate of water reducing; (2) keep concrete good slumption retention; (3) good compatibility with cement; (4) small shrinkage of concrete to keep the stability of volume and durability; (5) environmental in production and usage. Base on above advantages.
PCE superplasticizer is the newest generation superplasticizer for concrete projects in domestic and abroad. Comparing with FDN and other superplasticizer, PCE superplasticizer has many characteristic advantages in technology and performance as following: (1) low dosage, high rate of water reducing; (2) keep concrete good slumption retention; (3) good compatibility with cement; (4) small shrinkage of concrete to keep the stability of volume and durability; (5) environmental in production and usage.
Our innovative PCE Polycarboxylate Superplasticizer stands at the forefront of concrete technology, revolutionizing both domestic and international markets. This advanced superplasticizer is meticulously engineered based on sophisticated molecular designs and exceptional adsorption capacity of polycarboxylate, offering a groundbreaking water-reducing and retention solution for concrete applications. Our Service Offerings: We provide extensive technical support including guidance on concrete air content, distinctions between polycarboxylate ether and ester, and the integration of other admixtures with PCE. Additionally, we assist in fine-tuning test results based on your specific raw material data. Evolution of Concrete Water Reducing Admixtures: First Generation: Lignosulfonate types (Na, Mg, Ca). Second Generation: Naphthalene sulfonate, Sulfonated melamine formaldehyde, aliphatic series, and aminosulfonic acid series. Third Generation: Polycarboxylate-based superplasticizer, representing the pinnacle of water-reducing technology.
Polycarboxylic acid superplasticizer is a high-performance water reducer and a cement dispersant in the application of cement concrete. It is widely used in highway, bridge, dam, tunnel, high-rise building and other projects. This product is green, non flammable, non explosive, and can be safely transported by train and car. polycarboxylic acid superplasticize, because it truly designs an effective molecular structure based on the action mechanism of dispersed cement, has a super dispersive type, can prevent the loss of concrete slump without causing obvious retarding, plays a high plasticizing effect at low dosage, has good liquidity retention, the cement is adaptable to a wide range of molecular structures, has a large degree of freedom, many synthesis technologies, and has a lot of room for high-performance, and has a significant strengthening effect on concrete, It can reduce the shrinkage of concrete, and the content of harmful substances is extremely low. The technical performance characteristics give concrete excellent construction workability, good strength development, excellent durability. polycarboxylic acid superplasticize has good comprehensive technical performance advantages and environmental protection characteristics, which meets the needs of modern concrete engineering. Therefore, polycarboxylic acid superplasticize is gradually becoming the preferred admixture for preparing high-performance concrete. 1. It has good compatibility with all kinds of cement, good slump retention performance of concrete, and prolongs the construction time of concrete. 2. Low dosage, high water reduction rate and small shrinkage. 3. Greatly improve the early and late strength of concrete. 4. This product has low chloride ion content and low alkali content, which is conducive to the durability of concrete. 5. The production process of this product is pollution-free, formaldehyde free, in line with ISO14000 international standards for environmental protection management, is a green environmental protection product.
Description Polycarboxylate Superplasticizer concrete admixture (Powder) is a high performance, 100% poly-carboxylate based polymer, also named PCE. Polycarboxylate Superplasticizer concrete admixture (Powder) is specifically developed as an effective dispersant, fluidifier and high range water reducing agent for concrete and other mineral materials, which is air entraining. It complies with ASTM C 494, Type F specifications. Application As a new generation of environmental friendly concrete admixtures, Polycarboxylate Superplasticizer concrete admixture (Powder) can be applied in hydraulic, electricity, port, bridge, railway, tunnels and highway projects. In the production of self-compact precast concrete and conventional concrete, Polycarboxylate Superplasticizer concrete admixture (Powder) leads to low water/cement ratios, but maintains a normal level of workability. Features and Benefits Polycarboxylate Superplasticizer concrete admixture (Powder) has the same technical specifications with PC-L while remarkably reducing the cost of package and transportation. 2. Polycarboxylate Superplasticizer concrete admixture (Powder) is much easier to be handled in storage and transportation compared with PC-L. 3. Excellent compatibility with various types of cements. 4. High Water Reducing Rate: Low dosage, and low slump loss. Low chloride and alkali content, no corrosion to steel-bar. 6. High Stability: Neither precipitation nor layers at low temperature. 7. Environmental Friendly: Free from formaldehyde and nontoxic. Uses and Dosages 1. When Polycarboxylate Superplasticizer concrete admixture (Powder) is applied in the form of powder, normal dosage ranges from 0.15% to 0.6% of the weight of cementitious material in 1m3 of concrete. When applied in the form of liquid by being mixed with and dissolved into water, Polycarboxylate Superplasticizer concrete admixture (Powder) can be changed into liquid of which density varies from 10% to 40%. In order to optimize the dosage, experiments are required before the adoption of it or changing of the cement type. 2. Recommended dosage: 0.2% of the weight of cementitious material in 1m3 of concrete. 3. Polycarboxylate Superplasticizer concrete admixture (Powder) can be added into cement paste together with water or after mixing, while the latter approach is preferred. 4. The quantity of water must be strictly controlled when Polycarboxylate Superplasticizer concrete admixture (Powder) is applied, since slump loss of concrete is closely related to it. 5. Polycarboxylate Superplasticizer concrete admixture (Powder) is alkalescent, nontoxic, non-corrosive and environmental friendly. If it gets onto skin or in the eyes, please wash it off with clean water at once. If there is skin allergy, please see a doctor. 6. Do not mix it with naphthalene-based admixtures. If other admixtures, such as set retarder or corrosion-inhibiting admixture, are required simultaneously for some special projects, compatibility tests should be conducted beforehand. 7. When applying Polycarboxylate Superplasticizer concrete admixture (Powder) in steam curing concrete or other special concrete, abundant experiments are highly recommended to make sure it satisfies the expected requirement. 8. When Polycarboxylate Superplasticizer concrete admixture (Powder) is used to make concrete at or below C45, the total cost may be reduced by increasing the quantity of minerals. Package, Storage & Handling 1. Polycarboxylate Superplasticizer concrete admixture (Powder) for powder: Woven fabric bag with plastic liner. Net weight: 20kg +/- 0.13 kg. 2. Polycarboxylate Superplasticizer concrete admixture (Powder) needs to be stored in well-ventilated and dry place. 3. Keep Polycarboxylate Superplasticizer concrete admixture (Powder) from sunlight and below freezing point. Its storage stability can retain 12months in original package, but please use it up in 60days if it's been opened and repacked. 20kg/bag, 12 tons loaded in a 20ft.
Description Polycarboxylate Superplasticizer concrete admixture (40%) is a high performance, 100% poly-carboxylate based polymer, also named PCE. Polycarboxylate Superplasticizer concrete admixture (40%) is specifically developed as an effective dispersant, fluidifier and high range water reducing agent for concrete and other mineral materials, which is air entraining. It complies with ASTM C 494, Type F specifications. Application (1)As a new generation of environmental friendly concrete admixtures, Polycarboxylate Superplasticizer concrete admixture (40%) can be applied in hydraulic, electricity, port, bridge, railway, tunnels and highway. (2) In the production of self-compact precast concrete and conventional concrete, Polycarboxylate Superplasticizer concrete admixture (40%) leads to low water/cement ratios, but maintains a normal level of workability. Features and Benefits 1. Excellent compatibility with various types of cements. 2. High Water Reducing Rate: Low dosage, and low slump loss. 3Low chloride and alkali content, no corrosion to steel-bar. 4. High Stability: Neither precipitation nor layers at low temperature. 5. Environmental Friendly: Free from formaldehyde and nontoxic. Uses and Dosages 1.When Polycarboxylate Superplasticizer concrete admixture (40%) is applied, the dosage normally ranges from 0.3% to 1.2% of the weight of cementitious material in 1m3 of concrete. In order to optimize the dosage, experiments are required before the adoption of it or changing of the cement type. 2.Recommended dosage: 0.4% of the weight of cementitious material in 1m3 of concrete.When applied in ready-mixed station, it should be diluted into solution with the concentration of 10% and the recommended dosage. 3.Polycarboxylate Superplasticizer concrete admixture (40%) can be added into cement paste together with water or after mixing, while the latter approach is preferred. 4.Polycarboxylate Superplasticizer concrete admixture (40%) is alkalescent, nontoxic, non-corrosive and environmental friendly. If it gets onto skin or in the eyes, please wash it off with clean water at once. If there is skin allergy, please see a doctor. 5.Do not mix it with naphthalene-based admixtures. If other admixtures, such as set retarder or corrosion-inhibiting admixture, are required simultaneously for some special projects, compatibility tests should be conducted beforehand. 6.The quantity of water must be strictly controlled when Polycarboxylate Superplasticizer concrete admixture (40%) is applied, since slump loss of concrete is closely related to it. 7.When applying Polycarboxylate Superplasticizer concrete admixture (40%) in steam curing concrete or other special concrete, abundant experiments are highly recommended to make sure it satisfies the expected requirement. 8.When Polycarboxylate Superplasticizer concrete admixture (40%) is used to make concrete at or below C45, the total cost may be reduced by increasing the quantity of minerals. Package, Storage & Handling 1.Polycarboxylate Superplasticizer concrete admixture (40%) for liquid: It is packed in 1100kg (1000Liter) per IBC Tank. 2. Store it in covered containers and keep it from rain, sundry, and evaporation. 3. Keep Polycarboxylate Superplasticizer concrete admixture (40%) from sunlight and below freezing point. Its storage stability can retain 12months in original package, but please use it up in 60days if it been opened and repacked. 1.16 tons/IBC tank, 20.88 tons loaded in a 20ft.
Description Polycarboxylate Superplasticizer concrete admixture (50%) is a high performance, 100% poly-carboxylate based polymer, also named PCE. Polycarboxylate Superplasticizer concrete admixture (50%) is specifically developed as an effective dispersant, fluidifier and high range water reducing agent for concrete and other mineral materials, which is air entraining. It complies with ASTM C 494, Type F specifications. Application (1) As a new generation of environmental friendly concrete admixtures, Polycarboxylate Superplasticizer concrete admixture (50%) can be applied in hydraulic, electricity, port, bridge, railway, tunnels and highway. (2) In the production of self-compact precast concrete and conventional concrete, Polycarboxylate Superplasticizer concrete admixture (50%) leads to low water/cement ratios, but maintains a normal level of workability. Features and Benefits 1. Excellent compatibility with various types of cements. 2. High Water Reducing Rate: Low dosage, and low slump loss. 3Low chloride and alkali content, no corrosion to steel-bar. 4. High Stability: Neither precipitation nor layers at low temperature. 5. Environmental Friendly: Free from formaldehyde and nontoxic. Uses and Dosages 1. When Polycarboxylate Superplasticizer concrete admixture (50%) is applied, the dosage normally ranges from 0.3% to 1.2% of the weight of cementitious material in 1m3 of concrete. In order to optimize the dosage, experiments are required before the adoption of it or changing of the cement type. 2. Recommended dosage: 0.4% of the weight of cementitious material in 1m3 of concrete. When applied in ready-mixed station, it should be diluted into solution with the concentration of 10% and the recommended dosage thereafter is 2% of the weight of cementitious materials. For example, 100kg of Polycarboxylate Superplasticizer concrete admixture (50%) (50% concentration) can be mixed with 400kg of water to make solution of 10% concentration. 3. Polycarboxylate Superplasticizer concrete admixture (50%) can be added into cement paste together with water or after mixing, while the latter approach is preferred. 4. Polycarboxylate Superplasticizer concrete admixture (50%) is alkalescent, nontoxic, non-corrosive and environmental friendly. If it gets onto skin or in the eyes, please wash it off with clean water at once. If there is skin allergy, please see a doctor. 5. Do not mix it with naphthalene-based admixtures. If other admixtures, such as set retarder or corrosion-inhibiting admixture, are required simultaneously for some special projects, compatibility tests should be conducted beforehand. 6. The quantity of water must be strictly controlled when Polycarboxylate Superplasticizer concrete admixture (50%) is applied, since slump loss of concrete is closely related to it. 7. When applying Polycarboxylate Superplasticizer concrete admixture (50%) in steam curing concrete or other special concrete, abundant experiments are highly recommended to make sure it satisfies the expected requirement. 8. When Polycarboxylate Superplasticizer concrete admixture (50%) is used to make concrete at or below C45, the total cost may be reduced by increasing the quantity of minerals. Package, Storage & Handling 1. Polycarboxylate Superplasticizer concrete admixture (50%) for liquid: It is packed in 12000kg (1000Liter) per IBC Tank. 2. Store Polycarboxylate Superplasticizer concrete admixture (50%) in covered containers and keep it from rain, sundry, and evaporation. 3. Keep Polycarboxylate Superplasticizer concrete admixture (50%) from sunlight and below freezing point. Its storage stability can retain 12months in original package, but please use it up in 60days if it's been opened and repacked. 1.16 tons/IBC tank, 20.88 tons loaded in a 20ft.
Concrete admixture polycarboxylate ether PCE superplasticizer.
Sodium gluconate, sodium napothalene formaldehyde (SNF), polycarboxylate superplasticizer(PCE).Exports
Product name: Sodium Gluconate 98%min Other name: Gluconic acid, sodium salt HS Code: 28191600 Molecular Formular: C6H11O7Na, C6H11NaO7 Appearance: White crystalline powder Application: Construction Industry as the water reducing agent, retarder cement add a certain amount of sodium gluconate can increase the concrete plasticity and strength, and have block function, or delayed concrete initial and final setting time.
STEMOL PW-35 (PCE POWDER) The product was powdered polycarboxylate superplasticizer with high performance of water-reducing and slump retention It has the benefits as follow: 1. High water reducing rate could achieve 25% above, under the conditions of mixing the concrete with the same ratio of the water, the product could improve fluidity greatly. 2. Liquid polycarboxylate superplasticizer is available by diluting the product with just water. 3. The index of performance for this product is the same with the index of pumping agent. 4. It is convenient during use & can meet the requirement of building plants in remote area by mixing the product with water. 5. The product has the features of uniforms particles, lower moisture content, excellent solubility, high range water reducing, high slump retention and so on. TECHNICAL PARAMETER ITEMS INDEX APPEARANCE WHITE TO YELLOW POWDER WATER REDUCING RATE % >25 SLUMP RETENTION 2 HR MM 450 PH VALUE 7.0 - 9.0 MOISTURE
PCE Polycarboxylate superplasticizer is the newest generation superplasticizer used for concrete in domestic and abroad.It is based on molecular designs and adsorption capacity of polycarboxylate,we do R&D and successfully produce water reducing and retention type polycarboxylate superplasticizer for concrete. With initiating systerm and reaction conditions,we achieve high adaptability.Comparing with PNS and other superplasticizer, PCE has many characteristic advantages in technology and performance as following: (1) low dosage, high rate of water reducing; (2) keep concrete good slumption retention; (3) good compatibility with cement; (4) small shrinkage of concrete to keep the stability of volume and durability; (5) environmental in production and usage. Base on above advantages.
PCE superplasticizer is the newest generation superplasticizer for concrete projects in domestic and abroad. Comparing with PNS and other superplasticizer, PCE superplasticizer has many characteristic advantages in technology and performance as following: (1) low dosage, high rate of water reducing; (2) keep concrete good slumption retention; (3) good compatibility with cement; (4) small shrinkage of concrete to keep the stability of volume and durability; (5) environmental in production and usage.
Comm.: PCE Superplasticizer Appearance: White Flakes Solid Content: 96.5% Water Reduce Rate(%): 25-40 Dosage Recommendation(%): 0.1-0.3% Packing: 25kg plastic bags Quantity/20:17mt
Redispersible polymer powder (RDP/VAE), hydroxypropyl methylcellulose (HPMC), polycarboxylic acid superplasticizer (PCE), polypropylene stabilized fiber (PP fiber).
Redispersible polymer powder (rdp/vae). hydroxypropyl methyl cellulose (hpmc), polycarboxylic acid superplasticizer (pce), polypropylene stabilized fiber (pp fiber).OEM service, packaging
Item Company standard Jh pce Appearance Transparent pale yellow liquid Density (23 Ph value (23¡é) 6 Solid content (%) 50% Water reducing rate (%)25 Chloride content Na2so4content (%)5.0 Alkali content (%)5.0 Formaldehyde content (%)0.05 1.1ton/drum, 210kg/drum.
Model NO.: FOX 8HP Appearance: Powder Color: Light Yellow Efficacy: Water Reducing Type: Dispersant Classification: Chemical Additives Quality: High Quality Price: Competitive Price Export Markets: Global Product Description 1. Description: FOX® -8H (liquid) and 8HP (powder) is a high performance 100% poly-carboxylate based polymer, specifically developed as an effective dispersant, fluidifier and high range water reducing agent for concrete and other mineral materials. 8H (8HP) is a neutral concentrate grade; It is mainly used as a raw material to produce different types of high performance water reducers for targeted industrials. 2. Special Features: 8H (8HP) performs water-reducing effect, categorized as ASTM Type A admixture with superior benefits from the technology and the quality: -Very effective dispersing power, largely reduces required dosage -Good stability, producing extended slump life -Homogeneous plasticizing property with a unique cohesive characteristic, thus preventing segregation and bleeding -Promotes usage of higher dosage or volume of cementitious supplementary materials such as silica fume, fly ash and blast furnace slag. -Versatile disperser for various types of cement and minerals including gypsum, ceramic, ion-oxide pigment. 3. Uses 8H (8HP) is mainly used as a major ingredient to produce a high performance water reducers or plasticizers for the following applications -High performance concrete -Precasting -Self-compacting concrete -Pumpable or flowable concrete -Concrete containing silica fume, fly ash or Blast furnace slag -Specially shaped concrete elements -Architectural concrete -Lightweight concrete 8H (8HP) can also be used as-is for above-mentioned applications. However, due to variations in chemical composites of cements and other materials used and for different application requirements, it is not suggested to use 8H (8HP) directly in concrete or other materials without evaluation. The optimal performance of 8H (8HP) in applications should be obtained through trial mixes and/or through formulation adjustments by the users. For precast products processed in elevated temperate such as steam curing, use Simon 600. For technical support, please contact FuClear technologies Inc. 4. Special notes Do not use 8H (8HP) with additives containing naphthalene sulfonate. Unreliable rheologic behaviours may be experienced. Do not use 8H (8HP) for temperature treated concrete or other materials. Use Simon 600. 5. Packaging Available in 200 kg (180 L/ 48 gal) drum and 1000 kg (893L/ 236gal) tank for 8H (liquid), and 25kg plastic bag for 8HP (powder form) 6. Storage 8H should be stored at temperature 5- 40C (40-104 F). When It freezes, full strength can be restored AFTER COMPLETE THAWING AND THOROUGH AGITATION. Keep container closed when it is not in use. Do not store the product directly under sunlight. 7. Shelf life The shelf life is twelve (12) months when it is packed with a new drum or tote tank. 8. Handling 8H (8HP) shows negligible toxic, hazardous, and corrosive. Comprehensive instructions are given in the Material Safety Data Sheet available from Fuclear sales offices. Package : plastic bag
Product Description This product is a water-soluble concrete admixture, major part of which is polycarboxylate polymer. It provides functions of high range water reduction, excellent slump retention, low shrinkage and high strength. It can be added to different strength grade concrete, especially for the concrete of high strength, self-compacting, high durability and performance. This product accords with GB8076-2008, JG/T233 first-class standards, and also satisfies the No. [2005]101 Specification of National Ministry of Railways. Benefits High range water reduction: 25~40% Set retarding function High slump retention and guaranteed slump range, small rate of slump loss The significant enhancement eff¬ect to concrete hardening Well workability, no segregation, no bleeding and high pumpability No chlorine, low alkalis Air content can be adjusted by project requirements Significant improvement in preventing freezing, segregation, carbonization and shrinkage, the life time of concrete is extended greatly Fields of Application All grades of pumping concrete and economical concrete for long-distance transport High strength concrete, owing concrete, self-compacting concrete, mass concrete, high performance concrete and clear water concrete structures All sorts of industrial and civil building projects, high-compressive-strength concrete structures, especially in large scale concrete structures, which require the high durability of concrete Produce large-scale prestressed concrete beam or board, and steam curing concrete etc. Physical properties Items Specification Appearance : Light yellow Solid content wt.% 45.0¡À1.0 Specific gravity (20¡æ) 1.16¡À0.01 pH value 7¡À1 Chloride content % ¡Ü0.01. 200kg P.E. drum or IBC Tank.
Product Description This product is a water-soluble concrete admixture, major part of which is polycarboxylate polymer. It provides functions of high range water reduction, excellent slump retention, low shrinkage and high strength. It can be added to different strength grade concrete, especially for the concrete of high strength, self-compacting, high durability and performance. This product accords with GB8076-2008, JG/T233 first-class standards, and also satisfies the No. [2005]101 Specification of National Ministry of Railways. Benefits High range water reduction: 25~40% High slump retention and guaranteed slump range, small rate of slump loss The significant enhancement eff¬ect to concrete hardening Well workability, no segregation, no bleeding and high pumpability No chlorine, low alkalis Air content can be adjusted by project requirements Significant improvement in preventing freezing, segregation, carbonization and shrinkage, the life time of concrete is extended greatly . Fields of Application All grades of pumping concrete and economical concrete for long-distance transport High strength concrete, owing concrete, self-compacting concrete, mass concrete, high performance concrete and clear water concrete structures All sorts of industrial and civil building projects, high-compressive-strength concrete structures, especially in large scale concrete structures, which require the high durability of concrete Produce large-scale prestressed concrete beam or board, and steam curing concrete etc. Physical properties Items Specification Appearance Red Solid content wt.% 40.0¡À1.0 Specific gravity (20¡æ) 1.11¡À0.01 pH value 7¡À1 Chloride content % ¡Ü0.01. Dosage Dosage: 0.6~1.2% of total cementitious materials. Increase dosage to 1.0~2.0% when manufacture the high-compressive-strength concrete. The optimum mix design needs to be determined by the requirements of the project, specialties of materials and mixture tests before usage. Can not be mixed with naphthalene-based admixture; the compatibility of combination with other admixtures needs to be conformed by mix tests. The factors, which include the amount of mud in sand and grave, the variation of admixture quality, can a¬ffect water reducing performance of this product in a big range. 200kg P.E. drum or IBC Tank.
