Model: CWVC-1S Dimensions: 420x280x400mm Cutting speed: 0-400 (mm/s) Cutting thickness:1.0-3.5mm Power Supply:110/220 V Segmentation approach: Straight Weight : Approx.40 Packing : wooden case Size: 550*400*450 Weight : 46.
NTG350 Pre-scored PCB Depaneling machine, PCB Separator: Pneumatic Type FEATURES The machine was designed to depanel pre-scored panelboards carefully, without bending or tension stress. Even sensitive SMD-Components like ceramic capacitors, will not be damaged by the depaneling process, or thin board even to 0.3mm cab be worked safely. Due to the special design of the knives also boards with high components placed close to the edges can be depaneled safely.Based on a proven method of depaneling, wedge-shaped knives are used to cut the panels within the groove. This enables the boards less than 1mm thickness to be separated safely and without creating stress. This machine is pneumatically driven using standard parts. It is noiseless operation with none of usual compressed air noises. Rigid design without vibration in operation The PCB with sensitive SMD capacitor or thin board even to 0.3mm can be worked safely.Gap for insertion of the board can easily be adjusted by means of the adjusting knob in front of the machine.Gap for insertion of the board can easily be adjusted by means of the adjusting knob in front of the machine.Gap for insertion of the board can easily be adjusted by means of the adjusting knob in front of the machine. Depaneling process without vibrations Pneumatic control placed in a separate unit for easier maintenance. SPECIFICATIONS â?¢Easy maintenance and operation. Air source¡GCompressed air 5kg/cm2 Dimension¡G(L) 720 x (W) 500 x (H) 1070 mm Weight¡G190Kgs Knife length¡G350mm PCB thickness range¡G0.3mm ~ 3.0mm www.renthang.com renthang@renthang.com +886-2-82011187
NTG-520N Pre-scored PCB Depaneling machine/ de-panelizer. Separate PCB along with V grooves. [Feature] 1. Separating the V-cut panel boards in the principle of non-bending stress. 2. The knives are adjustable both in axial and radial directions. 3. The round knives separate the board within the V-groove. Slightly adjust according to PCB thickness. 4. The depaneling maximum of PCB width is 160mm, the PCB length is unlimited. [ Specification ] Powerï¼?110V/220V, 50/60HZ Dimensionï¼?(L)430 x (W)430 x (H)520 Weightï¼?36 kgs PCB thickness rangeï¼?0.8-2.0mm www.renthang.com renthang@renthang.com
Pcb depaneling 1.Easy operating modes 2.Easy setting of the PCB edge guides 3.Cutters can be re-grinded 4.Avoid damaging Specification: Model CWVC-1S PCB Cutting Length (mm) 330 Cutting Speed (mm/s)0~400 Cutting Thickness (mm)1.0~3.5 Power Supply (V)110/220 Size (mm) 420*280*400 Weight (Kg)25 Blade Hardness (HB)540~567 Blade Hardness (HRC)60~63 Blade working life for metal (Year)0.5 Blade working life for PCB (Year)1 Guarantee (Year)1 Delivery (Day)1 Min. Order (Set)1 Ability (Set)1000 Detailed Product Description: 1. For electronics, cell phones, computers, PCB, FPC (flexible printed circuit board),LED. 2.Mold make of SKH-11 Steel, Blade is SKH-9(From Japan), rigorous Dedicated to high strength cutting, and excellent toughness, able to cut metal board Technical characteristics: 1. Structural precision, the load evenly, to eliminate internal stress 2. Safe, easy to operate 3. For electronics, cell phones, computers, PCB, FPC (flexible printed circuit board) Feature: 1. Guide can be adjusted vertically to suit different PCB thickness. 2. Clearance between the circular blades can be precisely adjusted with the knob. 3. Upper and lower circular blades can be re-used after regrinding. 4. Shape and sizes of the circular blades can be made according to customer's specifications. Our Advantage : 1. CWVC-1 Pcb depanelizer original manufacturers, price concessions 2. Promise day technical support services 3. Limit the handling of complaints, half an hour back to customers 4. Depanel Experts, the provision of professional PCB sub-programme 5. Reliable machine maker,we get Experts--15,each one got over 6 years experience,equipment quality will be satisfying.
Model CWPE PCB Area (mm) 330*220 Power Supply (v)110/220 Depression (Pa) 0.45~0.7 Size (mm) 730*810*1700 Contribute (Tone)3~30 Weight (Kg) 530/700 Mold Hardness (HRC)60~63 Mold Hardness (HB)540~567 Min. Order (Set)1 Delivery (Day) 1 Guarantee (Year)1 Ability (Set) 1000 Detailed Product Description: 1. For electronics, cell phones, computers, PCB, FPC (flexible printed circuit board) 2 .Other spare parts for punching molding 3. Mold make of SKH-11 Steel, Blade is SKH-9(From Japan),Rigorous Job!!!! Technical characteristics: 1. Structural precision, the load evenly, to eliminate internal stress 2. Safe, easy to operate 3. For electronics, cell phones, computers, PCB, FPC (flexible printed circuit board) and other spare parts for punching molding industry Feature: FPC /PCB punching (CWPE) 1.Depaneling PCB/FPC by means of punching dies, to avoid micro-cracks caused by manual. 2.Cast iron framework for rigidity. Punching dies are changeable. 3.Easy set up of punching dies. 4.Moveable lower die for easy loading and unloading PCB punch die/FPC die/PCB punch mold/FPC mold. Our Advantage : 1.CWVC-1 Pcb depanelizer original manufacturers, price concessions 2.Promise day technical support services 3.Limit the handling of complaints, half an hour back to customers 4.Depanel Experts, the provision of professional PCB sub-programme 5.Reliable machine maker,we get Experts--15,each one got over 6 years experience,equipment quality will be satisfying. 730mm*810mm*1700mm,530~700/kg
Specification: Guarantee (year) 1 Delivery (day) 1 Ability (set) 1000 Pcb area (mm) 330*220 Power supply (v) 110/220 Depression (pa) 0.45~0.7 Size (mm) 730*810*1700 Contribute (tone) 3~30 Weight (kg) 530/700 Min. Order (set) 1 Detailed product description: 1. For electronics, cell phones, computers, PCB, fpc (flexible printed circuit board) 2 .Other spare parts for punching molding 3. Mold make of skd-11 steel, blade is skd-9(from japan), rigorous job!!!! Technical characteristics: 1. Structural precision, the load evenly, to eliminate internal stress 2. Safe, easy to operate 3. For electronics, cell phones, computers, pcb, fpc (flexible printed circuit board) and other spare parts for punching molding industry Feature: Fpc /pcb punching (cwpe) 1.Depaneling pcb/fpc by means of punching dies, to avoid micro-cracks caused by manual. 2.Cast iron framework for rigidity. Punching dies are changeable. 3.Easy set up of punching dies. 4.Moveable lower die for easy loading and unloading pcb punch die/fpc die/pcb punch mold/fpc mold. Our advantage : 1.Cwvc-1 pcb depanelizer original manufacturers, price concessions 2.Promise day technical support services 3.Limit the handling of complaints, half an hour back to customers 4.Depanel experts, the provision of professional pcb sub-programme 5.Reliable machine maker, we get experts--15, each one got over 6 years experience, equipment quality will be satisfying. 730*810*1700(mm) 530/700
Features: 1.Neat and smooth edge, no burr or overflow 2.More quick and easy, shorten the delivery time; 3. High quality ,no distortion,surface clean& uniformity; 4. Gathering the CNC tech,laser tech,software techâ?¦High accuracy,High speed Description: PCB depaneling (singulation) laser machines and systems have been gaining popularity over recent years. Mechanical depanaling/singulation is done with routing, die cutting, and dicing saw methods. However, as the boards get smaller, thinner, flexible, and more sophisticated, those methods produce even more exaggerated mechanical stress to the parts. Large boards with heavy substrates absorb these stresses better, while these methods used on ever-shrinking and complex boards can result in break age. This brings lower throughput, along with the added costs of tooling and waste removal associated with mechanical methods. Increasingly, flexible circuits are found in the PCB industry, and they also present challenges to the old methods. Delicate systems reside on these boards and non-laser methods struggle to cut them without damaging the sensitive circuitry. A non-contact depaneling method is required and lasers provide a highly precise way of singulation without any risk of harming them, regardless of substrate. Cutting Application: FPC and some relative materials; FPC/PCB/ Rigid-Flex PCB cutting, Camera module cutting;
Feature: Desktop single bench cutting machine, Speeds of up to 100mm/s, positioning speed 500mm/s; Cut continuously without interruption during loading and unloading; High quality shaft system allows the system to quickly ramp, reduce the period of time, Improve productivity, maintaining high precision; Use high-quality hardware to ensure high rigidity and high performance All screws are protected from dust and dirt from entering to improve the life and performance of the shaft; Use high-quality hardware to ensure high rigidity and high performance. Specification: Motor Drive System� Servo/Stepper Motor Spindle Speed� 50000r/s Cutting Performance� 500mm/s Drive System Repeat ability� ±0.02mm Cutting Speed� Max 100mm/s(Depends on PCB Material and Cutting Quality) Resolution� ±0.01mm Configuration� X Y Z 3 Axis Repeat Ability:
Usage: The copper clad plate surface is chemically etched unwanted copper conductors to form a line pattern. Process: Input Precision-Etching Fresh-Solution Cascade WR/S(1)(2)(3) Output Specification: 1) Outer dimensions: 6273mm L ´ 2012mm W ´ 2880±25mm H 2) Panel size: i) 630mm ´ 630 mm [Max] 200mm ´ 200 mm [Min] ii) 0.3mm ~3.2mm [Thickness] iii) FR4 core
We can supply on a monthly basis around 30-50 tons per month of Ceramic CPU scrap for gold discovery and scrap motherboards and lan cards. Our prices change according to your order. For bulk order or sample order, contact us for our quote. We have in stock CPU Scrap for immediate dispatch. The available CPU scrap details are as follows - -Scrap Ceramic CPU -Scrap Ceramic CPU with Aluminum Cap -Scrap Black Plastic CPU -Scrap Plastic CPU's -Ceramic Pentium pro -CPU 486 ceramic We welcome buyers from all over the world. Contact us with your requirement. Launched Launch Date Q3'13 Processor Number E5-1620V2 For Intel Smart Cache 10 MB For Intel QPI Speed 0 GT/s Instruction Set 64-bit Instruction Set Extensions AVX Lithography 22 nm Scalability 1S Only VID Voltage Range 0.651.30V of Cores 4 of Threads 8 Processor Base Frequency 3.7 GHz Max Turbo Frequency 3.9 GHz TDP 130 W Max Memory Size (dependent on memory type) 256 GB Memory Types DDR3 800/1066/1333/1600/1866 Max of Memory Channels 4 Max Memory Bandwidth 59.7 GB/s ECC Memory Supported Yes PCI Express Revision 3.0 PCI Express Configurations x4, x8, x16 Max of PCI Express Lanes 40 We also sell the following scrap: Computer Mother Boards Computer Finger Boards Computer Memory Computer Processors Computer Power Supplies Computer Hard Disks Computer Floppy Drives Computer CD Rom Computer Cases Computer Wires Computer Keypads Computer Mouse Computer UPS or Lead batteries from UPS Cell Phone Handsets Cell Phone PCB Boards Cell Phone Batteries Lithium Cell Phone Batteries Nickel Cell Phone LCDs Cell Phone Housings Cell P If interested, please do contact with us for more details,product photos,product availability ,shipment time.
LED Boards Depanelizer Machine for PCB,SMTfly-2SN Features: 1.It can cut many boards with multiple sets of knives work at the same time. 2.The knife flywheel is adjustable as a whole from 0 to 5mm 3.The distance between knives is regulable as well, satisfy to cutting the single PCB width from 15mm-20mm 4.The blade is made of Japan imported high speed and high precision steel material, which is durable and have a long service life. 5.It is convenient to adjust the cutting speed through rotary knob 6. No limits of the cutting length. 7.Thickness range of PCB: 0.8-3.5mm 8. With a conveyor belt line, the separated PCB can be send out directly to reduce pick- and-place. 9.The machine adopts multiple blade to separate boards with simple operation and high efficiency. 10. It can connect the production line to separate the PCB, fitted for batch production. pcb depanelizer for pcb,SMTfly-2SN pcb depanelizer for pcb,SMTfly-2SN LED Boards Depanelizer Machine for PCB,SMTfly-2SN Specification: Max cutting length: No limit Min cutting length: 100mm Max cutting width: 160mm Custom cutting width: 300mm Min PCB width: 8mm PCB thickness: 0.8-3.5mm Feeding speed: 0-500mm/s Working tem.: 10-35â?? Blade material(auto-lock function):Imported high precision steel Storge tem.: -20-50â?? Voltage: 110-220V Dimension: 2160*570*1050mm Packaging weight: 424kgs LED Boards Depanelizer Machine for PCB,SMTfly-2SN Our Service: # 1 day delivery # 24 hours fast response # Largest manufactory in South China # 100% responsible for quality # 14 years experience # Free sharpening for blades within 3 months
Features: CW-F04 is a machine cutting multi-panel PCB according to the pre-edited path by use of high-speed motion of milling cutter. Getting rid of the cutting flaws of manual cutting, C-CUT or Push cut, it improves product quality and reduces scrap rates. The machine adopts human-machine interface vie Windows XP, which is simple and convenient, able to achieve automatic cutting path correction, edit and modification of high-pixel CCD program, block program and single-step program. The PCB with two interactive plates loading and unloading materials will effectively reduce machine idle time, thus achieve an ideal productivity. With a high-pixel CCD amplification lens, auxiliary demonstration program and editing function, the machine can work more accurately and get sharper graphics. Equipped with automatically mark positioning correction system, the motion path is displayed in real time and traced in an analog way; all in all realize a clear vision. Due to the automatic position correction function, PCB can c ut more accurately. Within the maximum 3mm, the machine can correct the deviated position automatically, therefore lowers the standard for operators to place the plate, in this way to improve work efficiency immensely. The copy function of the two plates, the block, arrays, multi-angle plate, the single tracing modification function and block editing function indeed simplify the process of programming and increase efficiency.
We provide quick-turn prototype, low-volume and production PCB assembly with surface-mount (SMT), through-hole (THT) and mix components. We offer turn-key (just send us the Gerber and BOM files), consignment (you supply all parts) and various components purchase options to help you reduce cost and wait time. Our quick-turn prototyping service can assemble your boards within 24 hours. We can handle small quantity as well as volume productions. All our services are at a very competitive price and with 100% satisfaction guarantee.
We provide quick-turn prototype, low-volume and production PCB assembly with surface-mount (SMT), through-hole (THT) and mix components. We offer turn-key (just send us the Gerber and BOM files), consignment (you supply all parts) and various components purchase options to help you reduce cost and wait time. Our quick-turn prototyping service can assemble your boards within 24 hours. We can handle small quantity as well as volume productions. All our services are at a very competitive price and with 100% satisfaction guarantee.
We provide quick-turn prototype, low-volume and production PCB assembly with surface-mount (SMT), through-hole (THT) and mix components. We offer turn-key (just send us the Gerber and BOM files), consignment (you supply all parts) and various components purchase options to help you reduce cost and wait time. Our quick-turn prototyping service can assemble your boards within 24 hours. We can handle small quantity as well as volume productions. All our services are at a very competitive price and with�100% satisfaction guarantee.
We provide quick-turn prototype, low-volume and production PCB assembly with surface-mount (SMT), through-hole (THT) and mix components. We offer turn-key (just send us the Gerber and BOM files), consignment (you supply all parts) and various components purchase options to help you reduce cost and wait time. Our quick-turn prototyping service can assemble your boards within 24 hours. We can handle small quantity as well as volume productions. All our services are at a very competitive price and with�100% satisfaction guarantee.
We provide quick-turn prototype, low-volume and production PCB assembly with surface-mount (SMT), through-hole (THT) and mix components. We offer turn-key (just send us the Gerber and BOM files), consignment (you supply all parts) and various components purchase options to help you reduce cost and wait time. Our quick-turn prototyping service can assemble your boards within 24 hours. We can handle small quantity as well as volume productions. All our services are at a very competitive price and with�100% satisfaction guarantee.
Platform: 1200 x 506 x 333 (1.2M) weight: 6KG packing size: 1210*370*70mm 2400 x 506 x 333 (2.4M) weight: 15KG packing size: 1210*370*70mm Model name: Multi blade PCB cutting machine Aplication: LED panel, fiberboard, doule-layer PCB, aluminum plate, depaneling router aluminum substrate, copper substrate, FR4, glass fiber board Cutting thickness: 0.2-5 mm Max length of board: unlimited speed: 80, 120, 200, 400mm/s Platform: with1.2M platform or with 2.4M platform. Dimension: 325*380*333mm 33KG Voltage: 230V/50Hz(110V/60Hz) 40W Packing size 390*340*340mm Packing weight 50kg
Precision die-cut parts for 3C electronics (mobile, pad...), medical and automotive
We provide quick-turn prototype, low-volume and production PCB assembly with surface-mount (SMT), through-hole (THT) and mix components. We offer turn-key (just send us the Gerber and BOM files), consignment (you supply all parts) and various components purchase options to help you reduce cost and wait time. Our quick-turn prototyping service can assemble your boards within 24 hours. We can handle small quantity as well as volume productions. All our services are at a very competitive price and with 100% satisfaction guarantee.
