Led Depanelizer Machine For Pcb

NTG350 Pre-scored PCB Depaneling machine, PCB Separator: Pneumatic Type FEATURES The machine was designed to depanel pre-scored panelboards carefully, without bending or tension stress. Even sensitive SMD-Components like ceramic capacitors, will not be damaged by the depaneling process, or thin board even to 0.3mm cab be worked safely. Due to the special design of the knives also boards with high components placed close to the edges can be depaneled safely.Based on a proven method of depaneling, wedge-shaped knives are used to cut the panels within the groove. This enables the boards less than 1mm thickness to be separated safely and without creating stress. This machine is pneumatically driven using standard parts. It is noiseless operation with none of usual compressed air noises. Rigid design without vibration in operation The PCB with sensitive SMD capacitor or thin board even to 0.3mm can be worked safely.Gap for insertion of the board can easily be adjusted by means of the adjusting knob in front of the machine.Gap for insertion of the board can easily be adjusted by means of the adjusting knob in front of the machine.Gap for insertion of the board can easily be adjusted by means of the adjusting knob in front of the machine. Depaneling process without vibrations Pneumatic control placed in a separate unit for easier maintenance. SPECIFICATIONS â?¢Easy maintenance and operation. Air source¡GCompressed air 5kg/cm2 Dimension¡G(L) 720 x (W) 500 x (H) 1070 mm Weight¡G190Kgs Knife length¡G350mm PCB thickness range¡G0.3mm ~ 3.0mm www.renthang.com renthang@renthang.com +886-2-82011187

NTG-520N Pre-scored PCB Depaneling machine/ de-panelizer. Separate PCB along with V grooves. [Feature] 1. Separating the V-cut panel boards in the principle of non-bending stress. 2. The knives are adjustable both in axial and radial directions. 3. The round knives separate the board within the V-groove. Slightly adjust according to PCB thickness. 4. The depaneling maximum of PCB width is 160mm, the PCB length is unlimited. [ Specification ] Powerï¼?110V/220V, 50/60HZ Dimensionï¼?(L)430 x (W)430 x (H)520 Weightï¼?36 kgs PCB thickness rangeï¼?0.8-2.0mm www.renthang.com renthang@renthang.com

Pcb depaneling 1.Easy operating modes 2.Easy setting of the PCB edge guides 3.Cutters can be re-grinded 4.Avoid damaging Specification: Model CWVC-1S PCB Cutting Length (mm) 330 Cutting Speed (mm/s)0~400 Cutting Thickness (mm)1.0~3.5 Power Supply (V)110/220 Size (mm) 420*280*400 Weight (Kg)25 Blade Hardness (HB)540~567 Blade Hardness (HRC)60~63 Blade working life for metal (Year)0.5 Blade working life for PCB (Year)1 Guarantee (Year)1 Delivery (Day)1 Min. Order (Set)1 Ability (Set)1000 Detailed Product Description: 1. For electronics, cell phones, computers, PCB, FPC (flexible printed circuit board),LED. 2.Mold make of SKH-11 Steel, Blade is SKH-9(From Japan), rigorous Dedicated to high strength cutting, and excellent toughness, able to cut metal board Technical characteristics: 1. Structural precision, the load evenly, to eliminate internal stress 2. Safe, easy to operate 3. For electronics, cell phones, computers, PCB, FPC (flexible printed circuit board) Feature: 1. Guide can be adjusted vertically to suit different PCB thickness. 2. Clearance between the circular blades can be precisely adjusted with the knob. 3. Upper and lower circular blades can be re-used after regrinding. 4. Shape and sizes of the circular blades can be made according to customer's specifications. Our Advantage : 1. CWVC-1 Pcb depanelizer original manufacturers, price concessions 2. Promise day technical support services 3. Limit the handling of complaints, half an hour back to customers 4. Depanel Experts, the provision of professional PCB sub-programme 5. Reliable machine maker,we get Experts--15,each one got over 6 years experience,equipment quality will be satisfying.

Model CWPE PCB Area (mm) 330*220 Power Supply (v)110/220 Depression (Pa) 0.45~0.7 Size (mm) 730*810*1700 Contribute (Tone)3~30 Weight (Kg) 530/700 Mold Hardness (HRC)60~63 Mold Hardness (HB)540~567 Min. Order (Set)1 Delivery (Day) 1 Guarantee (Year)1 Ability (Set) 1000 Detailed Product Description: 1. For electronics, cell phones, computers, PCB, FPC (flexible printed circuit board) 2 .Other spare parts for punching molding 3. Mold make of SKH-11 Steel, Blade is SKH-9(From Japan),Rigorous Job!!!! Technical characteristics: 1. Structural precision, the load evenly, to eliminate internal stress 2. Safe, easy to operate 3. For electronics, cell phones, computers, PCB, FPC (flexible printed circuit board) and other spare parts for punching molding industry Feature: FPC /PCB punching (CWPE) 1.Depaneling PCB/FPC by means of punching dies, to avoid micro-cracks caused by manual. 2.Cast iron framework for rigidity. Punching dies are changeable. 3.Easy set up of punching dies. 4.Moveable lower die for easy loading and unloading PCB punch die/FPC die/PCB punch mold/FPC mold. Our Advantage : 1.CWVC-1 Pcb depanelizer original manufacturers, price concessions 2.Promise day technical support services 3.Limit the handling of complaints, half an hour back to customers 4.Depanel Experts, the provision of professional PCB sub-programme 5.Reliable machine maker,we get Experts--15,each one got over 6 years experience,equipment quality will be satisfying. 730mm*810mm*1700mm,530~700/kg

Platform: 1200 x 506 x 333 (1.2M) weight: 6KG packing size: 1210*370*70mm 2400 x 506 x 333 (2.4M) weight: 15KG packing size: 1210*370*70mm Model name: Multi blade PCB cutting machine Aplication: LED panel, fiberboard, doule-layer PCB, aluminum plate, depaneling router aluminum substrate, copper substrate, FR4, glass fiber board Cutting thickness: 0.2-5 mm Max length of board: unlimited speed: 80, 120, 200, 400mm/s Platform: with1.2M platform or with 2.4M platform. Dimension: 325*380*333mm 33KG Voltage: 230V/50Hz(110V/60Hz) 40W Packing size 390*340*340mm Packing weight 50kg

The LED lighting PCB comes into being with the rapid development of printed circuit PCB industry. Some LEDs were soldered on PCB to created lighting electronic products. As we all know that LED will generate more heat compared with other electronic parts, which required the PCB to have better ability for dissipating heat. For this special requirements, metal core PCB are frequently used on LED PCB, especially aluminium core PCB. This is because the aluminum PCB typically includes a thin layer of thermally conductive dielectric material that can transfer and dissipate the heat with much greater efficiency than a traditional rigid PCB. The application of LED PCB Telecommunications:LED indicators and displays are always used for telecommunications equipment because of the surrounding machinery, the excellent heat transfer ability. So aluminum-based LED PCBs is extremely useful in this application. Automotive: Aluminum PCB LEDs also used in cars on indicators, in headlights and brake lights, and other applications. The durability and competitive price makes these Aluminum Fr4 PCB Manufacturer ideal within the automotive industry. Computer: LED displays and indicators are becoming more and more common within computer applications, and the heat sensitivity of computer machinery makes aluminum PCB LEDs the ideal solution. In addition to LED applications, computer parts like power devices and CPU boards are commonly use aluminum PCBs because of their ability to dissipate and transfer heat. Medical: Lighting tools used in surgeries and medical examinations commonly use high-powered LED lights, and these LED lights often use aluminum PCBs. This is primarily due to the durability and heat transfer capabilities of aluminum PCB LEDs â?? this ensures medical equipment is functioning properly regardless of the number of patients cycling through a medical office. In addition to lighting tools, medical scanning technology often uses aluminum PCBs as well. Pcbmain supplied affordable LED PCBs Free PCB quotation is just a click away. Click below button to enter our PCB Price Calculator, fill out your custom PCB spec, and rough PCB price will show up in the right column automatically (shipping price will be given on order confirmation page).

Fr4 /aluminum /cem1 material; Min. Hole size 0.2mm; Min.Line space and width 4/4mil; Hole cooper wall 25um; Vacuum carton, 27*30*24

1) Layer: from 1 to 20 2) Board finished thickness: 0.5-6.0mm 3) Material: FR-4,CEM-1, CEM-3, High TG, FR4 Halogen Free, etc 4) Surface finish/treatment: HASL/HASL lead free, HAL, Chemical Gold/tin, Immersion Silver/Gold/Tin, OSP, Gold plating, Hard &Soft gold, Plating tin. 5) Product range: Flex-PCB, Rigid-PCB, Flex-rigid PCB,HDI PCB ,PCB of single, Double and Multi-layers, High frequency PCB ,etc 6) Max. finished board size: Single & Double Layer:450mm*650mm Multilayer:450*500mm 7) Min. drilled hole size: 3mil(0.075mm) 8) Min. line width: 3mil(0.075mm) 9) Min. line spacing: 3mil(0.075mm) 10) Solder mask color : Green/yellow/black/white/red/blue 11) Copper thickness in hole: >20.0um (1mil) 12) Shape tolerance: plus or minus 0.13 13) Hole tolerance: PTH: plus or minus 0.076; NPTH: plus or minus 0.05 14) Certificate: UL,ISO9001,ISO14001,SGS,RoHS compliance 15) Special req. Buried and blind vias +controlled impedence +BGA 16) Profiling : Punching ,Routing ,V-CUT, Beveling. Inner: Vacuum packing/Plastic bag Outer: Standard carton.